BMW Drivetrain Parts for BMW 3 Series E46 (1999-2005)

Replace this tube whenever the bearing or clutch kit is replaced.

Genuine BMW Guide Tube
This item fits the following BMW Chassis:
E36 M3,E34,E36,E39,E46,E53 X5
 

The ZF 320z S5D is a common swap choice among BMW enthusiasts due to its reliable and robust nature. Unfortunately, it does have a weakness. The detent pins and springs that live inside of the transmission are known to wear down over time, often causing the shift lever to lean towards the 5th gear position when in neutral.

This full-service kit consists of everything you need to replace the failing detents in your ZF transmission. The kit contains only Genuine ZF components, all of which are sure to provide you with smooth shifting and operation for years to come.

This kit includes the following items:

3 Detent Covers - 07119937227 3 Shift Pin Kits - 23117525048 2 Shift Pin Bushing Kits - 23117542726 1 Detent Pin - 23311224849 1 Detent Pin - 23317502165 Remedying the ZF's detent issue is a must for any enthusiast planning to get the most out of their transmission. Proper centering is essential for quick and smooth shifting, both being desirable features in any application. This kit is easy to install with several DIY guides existing online. A set of "drift" tools are required for proper installation.

This is the OE shifter for the E46 325xi and the 330xi (up to 03/2003) and the E36 Z3 1.9 and 2.5.

The shift lever out of the Z3 1.9 delivers a smooth and quiet shift without the notchiness and effort of aftermarket short shift kits. The Z3 shifter in the E30 is approximately 20% shorter than the original E30 shifter - less reduction than a full short shift kit but the perfect compromise between stock and aftermarket. We have installed multiple shift levers in the E30 but the Z3 1.9 feels the best to us. The shift knob height is reduced by about 1/4". This is the Genuine BMW Z3 1.9 shift lever and a direct fit to 6/86-1992 E30 318i/is, 325e/es, and 325i/is.

E30 install note: there is a bowl-shaped vibration damper mounted with the transmission flex disc (guibo). This damper needs to be removed or you need to bend the stock selector rod so it will clear. Most E30s already have the vibration damper removed so don't be surprised if it's not there. If you do choose to remove it, this would be the perfect time to replace the flex disc. On some 325e models the flex disc is a larger diameter and the selector rod will need to be bent to clear it.

This item fits the following BMWs:
1990-1992 E30 BMW 318i 318is 318ic
6/1986-1992 E30 BMW 325e 325es 325i 325ic 325is

Ensure smooth clutch operation in your BMW with the Turner Motorsport Genuine BMW Clutch Release/Throw-out Bearing. This crucial component, situated between the clutch pressure plate and release fork lever, is essential for optimal performance. When renewing your clutch, don't overlook the importance of replacing this genuine BMW bearing.

Key Benefits:

• Genuine BMW quality guarantees a perfect fit.
• Prevents clutch-related issues for reliable performance.

Upgrade your BMW's clutch system with the Turner Motorsport Genuine BMW Clutch Release/Throw-out Bearing.

This is the shifter actuator pin that's part of BMW's gate system for the shifter.

Genuine BMW Locking Pin
This item fits the following BMW Chassis:
E36 M3,E34,E36,E39,E46,E53 X5
 

Don't neglect your motor mounts! Most stock BMW motor mounts are fluid filled and the stiffness of the mount depends on this fluid. But over time the fluid leaks out and the strength of the mount is greatly reduced. A worn motor mount allows the engine to twist and shift around. The harder you're driving the more shift will occur. As the engine is moving around it can contact other parts in the engine bay - usually cooling related. The mechanical fan can hit the radiator; the A/C compressor can hit a radiator hose, the exhaust will flex and may break. Twisting of the engine can also lead to shifting problems as the transmission twists with it. There are countless issues related to worn or compressed motor mounts so don't overlook these as a regular replacement item (every 50,000 miles).

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

This item fits the following BMW Chassis:
E46 Non-M
E85 Z4 2.5i/3.0i/3.0si
E89 Z4 3.0si

Tired of dealing with excess shifter slop and a mushy shifter? The Turner Shifter Rebuild & Upgrade Kits will restore your shifter's crisp feel and eliminate excessive movement that develops over time with wear. Included in this kit are all the common wear components and upgraded bushings that will give you a tighter shifting feel than traditional rubber bushings and will resist wear significantly longer.

This kit is perfect to restore your driving pleasure and will be the last shifter rebuild you will ever need!

See the included components under Kit Contents below.

E46 M3, Z4 M Front Wheel Hub Assembly with Bearing. This is an OEM Wheel Bearing Hub Assembly. Available from FAG or GSP. Both meet all of the OE specifications for fitment and life.

FAG is an OE supplier to BMW as well as several other German marques. (SKF does not have a front bearing assembly for the E46 M3).

GSP is a high-quality supplier for aftermarket suspension components. They have quickly position themselves as an industry leader, and pride themselves on offering high-quality alternatives to their expensive OEM counterparts.

Upgrade your BMW with the Genuine BMW Front Wheel Hub/Bearing Assembly from Turner Motorsport. Engineered to the highest standards, this assembly ensures optimal performance and reliability for your vehicle. If you're noticing excessive vibration, a humming noise while driving, or unusual sounds when turning, it's likely time to replace your wheel bearing. This hub assembly, with the bearing pre-pressed, offers a hassle-free installation experience. Suitable for both left and right sides, it's a convenient solution to keep your BMW running smoothly.

• Genuine BMW quality ensures reliability and longevity
• Pre-pressed bearing for easy installation
• Eliminates the hassle associated with typical bearing replacements
• Suitable for both left and right sides