BMW Brake Pads for BMW 3 Series E46 (1999-2005)

From years of European automotive experience, the enthusiasts at ECS Tuning have developed a strong understanding of what it takes to produce a quality high-performance brake pad. After thousands of miles and many different pad compounds, they've landed on the ideal blend for the new EP24 "Enthusiast Performance" brake pad! If you're looking for a streetable, track-capable, performance brake pad, look no further than the ECS EP24!

Features & Benefits:

Strong stopping power - Increased coefficient of friction offers satisfying stopping power when cold (a necessity for a street pad!) and even more G-force-inducing power when they warm up. With cold and warm friction comparable to Hawk HPS (and higher than many other street pads) the stopping experience with the EP24 pad is impressive for street-driven vehicles on streetable tires. Positive initial bite - Race pads have the reputation of acting like an on/off switch, which is a no-go for a pad for a street application. The EP24 offers OE-level initial bite for low-stress braking in stop-and-go situations. Reasonable dust - Race pads utilize a high metallic composition. Pads that use high amounts of metal not only dust terribly, but also will bake onto wheels with high temperatures and are a bear to clean. This is not the case with these performance street pads. Now using these pads on most of our shop cars, we’ve found over time that dust is comparable to factory pads in most applications (with greatly improved braking performance). Quiet braking - It’s not a race pad, so it shouldn’t squeal like one. While not as quiet as our ceramic DD23 pad, you’ll still be able to drive your spouse to dinner. Long life - This should be an obvious one. Even in a performance pad, your daily driver pads should last and last, so that was key in selecting our ideal compound. This compound wears slower and is kinder to rotors than two of the top competitors.

EP24 "Enthusiast Performance" brake pads are included in our Lifetime Replacement Program for worry-free motoring.

Pagid's newest sprint racing pad was developed for racing cars achieving very high average speeds with short braking distances and functional aero. The RST pads feature very high friction levels for the quickest bite and highest fade resistance than any other Pagid pad. RST pads are broken into 5 levels and all have ranging bite and release characteristics. RST pads will trade low wear for torque output and faster response. These were developed based on the needs of race engineers in World Challenge, Daytona Prototype, and GTLM where functional aero meant high grip in the corners and smaller braking zones.

RST Brake Pad Types:

• RST1 -  Very high friction coefficient, high initial bite, progressive torque curve, very high fade resistant
• RST2 - Medium high friction coefficient, good initial bite, mild progressive torque curve, good pedal feel
• RST3 - High friction coefficient, good initial bite, low heat conductivity, excellent modulation and release characteristics
• RST4 - Medium friction coefficient, good initial bite, mild progressive torque curve, high heat tolerance with consistent feel
• RST5 - Optimum thermal management, absolutely fluid fade resistant, highly developed recovery properties, extremely high friction coefficient

This item fits the following BMWs:
1995-1998 E36 BMW M3 
2001-2006 E46 BMW 330i M3 
1989-1995 E34 BMW 525i 530i 535i 540i M5 
1988-1994 E32 BMW 735i 735il 740i 740il 750il 
1997-2002 Z3 BMW M Roadster M Coupe
2006-2008 Z4 BMW M Roadster M Coupe

Brake pad wear sensors are a convenient part of the braking system, notifying the driver of when the material on the brake pads are getting low and need to be serviced. Unfortunately it is common in custom or upgraded braking systems that the pad wear sensor is non-existent or does not mate properly with the connector on your vehicle, leaving you with a brake pad wear warning every time you start your vehicle.

ECS Tuning has developed this direct-fit Brake Pad Wear Sensor Bypass to alleviate this issue. This sensor bypass will trick the vehicle's electronics into thinking that the brake pads have adequate pad material to keep the dashboard warning from appearing. No more unnecessary warnings when installing a big brake kit or your own custom setup. This bypass is a plug-and-play component that requires no modifications so you can revert back to your OEM setup if necessary.

Some vehicles may be equipped with two front brake pad wear sensors, or a front and rear sensor, please be sure to double check the required quantity for your vehicle before placing an order.

*During installation, make sure to clean the mated female connector on your vehicle of any dirt or debris to ensure that the Brake Pad Wear Sensor Bypass is engaged securely.