Showing 358 results for ""

Located between the downpipes and the center section of the exhaust. This seals off the connection between the exhaust pipes.

Fits the following BMW engines:
S54 3.2L

Connects the exhaust manifold to the downpipes.

Genuine BMW Hex Bolt - M10X40
This item fits the following BMW Chassis:
E36,E39,E46,E53 X5,E83 X3,E85

Fits BMW Engines including:
M44,M52,M54,M56,S52
 

Drop 10 lbs and replace your midpipes/resonator for a free flowing X-Pipe to get a smoother sound and decreased back pressure!

An X-Pipe can do wonders for your engine for performance and sound. Exhaust gasses come out of your motor in pulses from each individual cylinder, with a cross-over or x-pipe the exhaust gasses meet in the middle and combine. The result of the combining gasses is a smoother path leading to lower amounts of back pressure, a more free-flowing exhaust and leads to increase power and response. Combine with a new rear muffler for best results!

BMW's straight six motors have been referred to as sounding like chain-saws, and being "raspy" or "metallic". Transform your exhaust with our mid section exhaust with an integrated x-pipe to smooth out your exhaust tone and enjoy the sound of your M54! The mid section x-pipe comes with new hardware for connection to the downpipes and includes superior exhaust sleeves to slide over your factory rear section.

Part Design:

Turner In-house designed and engineered using FARO ARM laser scanning technology and SolidWorks 3D CAD modeling for precision fitment.
T304 Stainless Material in a natural finish - 1.25mm wall thickness, back purged and TIG-welded throughout
2.0"OD Stainless Steel Mandrel Bent Tubing
T304 Stainless Steel 12mm barbed exhaust hangers Tig-Welded in OE locations for precise fitment.​
Flanges to mate up to your factory downpipes
10 lb weight reduction from factory midpipes
Designed for smoother flow path and less backpressure
Kit Contents:

E46 325/330 Mid Section With Integrated X Pipe
New downpipe hardware to replace your seized exhaust studs
2 Dual Clamps Exhaust Sleeves for easy installation to your factory exhaust

Set of 2 universal 2.5" inlet to 3.5" outlet exhaust tips.

Over the years, it is not uncommon for exhaust tips to be damaged and corroded, becoming a "sore spot" of your BMW. To remedy this unsightly feature, we now offer our very own exhaust tips! Featuring stainless steel construction and a simple, yet sporty design, this exhaust tip will look perfectly at home on almost any model.

Features & Specifications:

Swivel feature for perfect alignment of the exhaust tips in the rear bumper
2.5" Inner Diameter
3.5" Outer Diameter
Brushed Aluminum Finish
Double Wall Construction
Angle Cut Style
Includes Stainless Steel Clamp

Bad oxygen sensors can cause check engine lights and poor fuel mileage. Replace your faulty sensor with this high quality Bosch sensor to turn off your check engine light and restore fuel mileage.

This is the pre-cat oxygen sensor for cylinders 1-3 for BMW E46 M3. Bosch # 13 949. This is a OEM replacement part for BMW part # 11781743994.

Bosch is one of the largest OEM producers of Genuine BMW and aftermarket parts in the world, providing parts for almost every major automotive manufacturer. Bosch has likely supplied many of the original electrical (and mechanical) parts for your BMW. Thanks to their quality, high durability, and reliability, you should expect a long service life from Bosch products.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

This item fits the following BMWs:
2001-2006 E46 BMW M3 M3 convertible
2001-2002 Z3 BMW M Roadster M Coupe

When we set out to build an exhaust for the BMW E46 323/328, we knew it needed to match how you drive and how you want your car to sound. We also know that while many drivers wish for an aggressive, head-turning exhaust note, they don’t always want the volume all the time. That’s why we engineered this lightweight Turner Motorsport performance exhaust system with a fully valved muffler, giving you the ability to switch between a refined, quiet tone and a loud, spirited sound at any moment.

Our new Turner Cat-Back Exhaust is the first valved rear section designed specifically for the E46 323/328. With the included remote controller, you can change your exhaust tone with a simple click. With the valve closed, the system delivers a smooth, deep, tasteful note for daily driving. Open the valve, and you unlock an aggressive, free-flowing exhaust tone that brings out the full character of the M52 engine, perfect for track days or anytime you want maximum sound and performance.

For maximum flow and durability, we built this system using dual 2.0" T304 stainless steel mid-pipes that bolt directly to your factory downpipes. Inside the mid-section, we integrated an X-pipe to balance exhaust pulses, reduce backpressure, increase performance, and smooth the exhaust note. The dual 2.0" mid-pipes merge into a 3.0" axle-back section and a full 3.0" valved muffler, finished with bold 3.0" integrated tips that perfectly fill the E46 rear bumper.

Modern performance cars use valved exhaust systems as standard equipment, but the E46 never truly benefited from that technology. Some early E46 models used a basic vacuum-controlled valve, but after nearly 20 years, most are no longer functional. By studying BMW’s original concept and improving it with modern engineering, we created a lightweight, high-performance valved exhaust that gives your BMW E46 323/328 modern sound control, better flow, and a dramatically enhanced driving experience.

Part Design & Engineering

In-house Turner Motorsport design using FARO ARM laser scanning and SolidWorks 3D CAD for precise BMW E46 fitment
T304 stainless steel construction with 1.25mm wall thickness, TIG-welded and back-purged for superior strength
2.0"–3.0" mandrel-bent stainless tubing for optimal flow and performance
T304 stainless 12mm barbed hangers TIG-welded in OE locations for perfect alignment
Direct-fit flanges engineered to bolt to factory BMW 323/328 downpipes
Over 20 lbs lighter than the factory cat-back exhaust
Designed for smoother flow, reduced backpressure, and improved exhaust tone
Kit Contents

2.0" Mid-section with integrated X-pipe
New center exhaust brace
3.0" valved muffler with integrated 3.0" tips
Valve controller with installation kit and two remote fobs
New downpipe hardware to replace seized factory studs
All required gaskets, clamps, and installation hardware