Replace the flimsy plastic bleeder screw used in the coolant expansion tank or in one of the cooling system hoses with this high quality, durable, aluminum bleeder screw. The stock plastic screw can deform over time due to heat or even regular use. We have even seen the head of the screw snap off, leaving the threaded body stuck in the expansion tank. This aluminum screw will help to prevent sudden failure of the bleeder screw, which can result in immediate overheating of the car.

ECS Tuning's Aluminum Coolant Bleeder Screw replaces Genuine BMW Part Number 17111712788

This plastic water pipe is positioned directly underneath your intake manifold. Due to its plastic construction, it is notorious for catastrophic failure. Rapid cooling loss and overheating are both direct results of this failure, posing permanent and lasting damage to the engine.

Replace your cracked/broken coolant pipe with this high-quality Bavarian Autosport component to ensure long-term reliability and perfect fitment.

From 1974 to 2019, Bavarian Autosport was one of the premier vendors for BMW and MINI auto parts. We are happy to preserve the Bav Auto legacy by continuing to carry their high-quality products into the future. All Bav Auto parts will remain unchanged in design and sourced from the same OEM suppliers to ensure long-lasting reliability. We trust these parts, accessories, and upgrades so confidently that we back every Bavarian Autosport branded component with a 2-year warranty.

The ECS Exact-fit water line is a perfect upgrade if you're tired of dealing with brittle failure prone parts under your hood. The reinforced fluorosilicone hose has been pre-formed to route the same way your stock line did so you can maintain that clean factory installed appearance. Upgrading the line fitting with a billet aluminum piece eliminates the failure prone plastic fitting giving your cooling system strength.

Included:

Aluminum fitting

• Material: 6061-T6 Aluminum - MIL-A-8625F Type II Class 2 black anodized for superior corrosion resistance and strength
• Single-piece design avoiding additional interfaces that may cause leaks
• Matches OEM style connection to upper coolant hose

Silicone hose

• Material: Black Reinforced Fluorosilicone Lined Coolant Safe Silicone
• Pre-formed hose to ensure OEM style routing and appearance
• Can maintain the use of your stock retaining clips to route the hose in identical locations (due to slight variations in silicone the retainer on the expansion tank may not fit)
• Pressure tested to ensure 2X operating pressures to ensure reliability

Ensure a tight and leak-free seal in your BMW's cooling, vacuum, or intake systems by installing a new adjustable hose clamp. Over time, clamps can deform or lose their tightness due to aging or frequent removal, potentially causing leaks in your coolant or vacuum hoses. Avoid the risk of leaks by replacing old clamps with new hardware, offering peace of mind against coolant and vacuum system issues.

Key benefits of the adjustable hose clamp include:

• Maintaining a secure and leak-free seal in your BMW's systems.
• Preventing coolant or vacuum leaks that can affect performance.
• Adjustable size from 70mm to 78mm for versatile applications.

Upgrade your hose clamps to ensure optimal performance and reliability in your BMW's systems.

BMW E46 M3 ECS Silicone Hose Kit: Upgrade Your BMW's Cooling System

• Enhances durability and longevity
• Resistant to high temperatures and pressure
• Improves coolant flow for better engine cooling
• Easy to install with no modifications required

Upgrade your BMW's cooling system with the BMW E46 M3 ECS Silicone Hose Kit. This kit is designed to enhance durability and longevity compared to OEM rubber hoses. Constructed from high-quality silicone, these hoses are resistant to high temperatures and pressure, ensuring reliable performance under demanding conditions. Additionally, they improve coolant flow for better engine cooling, resulting in improved overall performance. Installation is easy and straightforward, with no modifications required, making it a convenient upgrade for BMW enthusiasts. Access Secret Premium Dashboard

A failing water pump is a recipe for engine overheating and costly internal damage. Keep your coolant flowing and your engine protected by replacing your aging pump with this high-quality OE unit from Bremmen Parts.

Water pump replacement is suggested at 60,000 - 80,000 miles.

This pump includes the alignment dowel, sealing gasket, and thermostat sealing o-ring. We recommend picking up a water pipe sealing o-ring (11537830712) and thermostat (11531318274) for a comprehensive service.

ECS Tuning Stainless Steel Hose Clamps for BMW

Upgrade your BMW's hose clamps with ECS Tuning Stainless Steel Hose Clamps, designed for convenience and durability. Say goodbye to long waits and overpriced dealership clamps. With various band widths available, these stainless steel clamps ensure a secure fit for your vehicle's hoses.

Benefits:

• Convenient replacement for worn-out hose clamps
• Made of durable stainless steel for long-lasting performance
• Available in various band widths for versatile use
• Affordable alternative to dealership pricing

ECS Tuning 304 Stainless Steel Hose Clamps

Revolutionize your car maintenance with ECS Tuning's premium 304 stainless steel hose clamps. Eliminate dealership delays and inflated prices! These German-style clamps utilize T-bolts for hassle-free diameter adjustment. With various band widths available, these durable clamps ensure reliability without the hefty cost. Experience dealership-quality products at affordable rates, exclusively at ECS Tuning.

Upgrade your BMW's hose clamps with the 77-85mm - 3/4" Band Hose Clamp from Turner Motorsport. These full 304 stainless steel clamps offer convenience and quality without the dealership price tag. German-style T-bolts allow for easy adjustment to your required diameter, ensuring a secure fit every time.

• Made of durable 304 stainless steel for long-lasting performance
• German-style T-bolt design for easy size adjustment
• Convenient band widths for versatile applications
• Quality alternative to dealership pricing

ECS Tuning 304 Stainless Steel Hose Clamps

Once again, ECS Tuning has found a way to make life easier for working on your car. Need new hose clamps but don't want to wait to order it from the dealership or pay more than you should for a hose clamp? That's where we come in! These are full 304 stainless steel hose clamps with various band widths for your convenience. They are German style using T-bolts to adjust in size to your required diameter. Never pay dealer pricing again, but still get the quality you love here at ECS Tuning.

• Made from high-quality 304 stainless steel for durability
• German-style design with T-bolts allows for easy size adjustment
• Various band widths for versatile use
• Avoid dealership pricing without compromising on quality
• Perfect for BMW enthusiasts seeking affordable yet reliable hose clamps