Free Shipping on orders $99 and up! Some exclusions apply. Contiguous US only.

E53 Cylinder Head and VANOS Tools

If you are delving into a VANOS service, cylinder head service, timing chain service, head gasket replacement, or any timing work, having the proper tools are completely required. Precise digital torque wrenches, locking tools, alignment gauges, and all the necessary tools for servicing your BMW engine are listed on this page. Complete the job with the tools chosen by professionals to service your BMW the proper way.
You're currently viewing parts for your (E53) X5 2000-2006. Reset your chassis
For accurate results, specify your model below.
Schwaben BMW Oil Line Disconnect Tool

Designed to work with the difficult to release oil lines on BMW. Seals can easily be damaged if not released properly. Small overall design allows tool to work in hard to reach areas tool. 

Features:

  • Made from aluminum for strong durable use
  •  Red anodized finish
Schwaben
Part #: 015345SCH02A
Price: $16.95 (USD) 
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
Schwaben Wire Crimper/Stripper Pliers

All the features you could ask for from electrical pliers.

Features:

  • Crimp & Strip 10 to 22 gauge
  • Wire & Bolt cutter
Schwaben
Part #: 010840SCH01A
Price: $12.95 (USD) 
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
Brownline Digital Torque Angle Gauge

Measure torque angle settings with high accuracy (+/- 2% max) with the Brownline Digital Torque Angle Gauge.
 

Features:

  • The Brown Line Digital Angle Gauge allows you to easily measure angular rotation for torque-to-yield and torque angle applications 
  • Utilizing a V-channel and magnets, it quickly attaches to the handle of any standard ratchet, wrench, or breaker bar, and it works on any size drive—1/4”, 3/8”, ½”, ¾”, &1 
  • Built-in feature allows the user to keep track of angular rotation even when using a ratchet 
  • Measures angular rotation with accuracy of +/- 2% 
  • Large backlit digital display shows current angle 
  • Intuitive design makes operation simple 
  • LEDs and digital display provide visual feedback 
  •  Audible feedback when target angle is reached 
  •  Automatically powers off not in use for 2 minutes 
  • Low battery indicator
  • Requires two AAA batteries ( not included)
Brownline
Part #: bwnbldag001
Price: $119.95 (USD) 
Ships in 6 days
Free Shipping Free Shipping
Quantity:   
Schwaben BMW M62 Complete Vanos & Timing Tool Kit

The BMW M62 engine found in many 5 series, 7 series, and X5's has two major weak points over time, Vanos seal and timing guides. The timing guides being the most noticeable and damaging can be very expensive to have a shop repair when trying to get back on the road. If you have some mechanic abilities and can follow instructions you could get this job done for a lot less, but you'll need the right tools for the job. 

This Schwaben kit features everything you need in one case to perform either job or both making timing service easy and accurate.

Tools included:

  • Camshaft locking blocks
  • Flywheel locking pin
  • Timing chain tension block
  • Upper chain tension locks
  • Timing wheel alignment tools
  • Vanos adjustment socket
  • Vanos solenoid socket
Schwaben
Part #: 022844SCH01A
Price: $299.95 (USD) 
In Stock
Free Shipping Free Shipping
Quantity:   
Schwaben 9 Piece Scraper, Hook And Pick Set

Some of the most popular  uses are carbon cleaning/scraping, picking out o-rings, snap rings and clips.This kit features large and small picks, hooks and a 1" wide scraper. This 9pc set should be part of everyone's tool assortment.

Features:

  •  3" Blade MINI Awl, 90°, Hook, and Curve
  • 6" Blade Awl, 90°, Hook, and Curve
  •  6" x 1" wide scraper
Schwaben
Part #: 008504SCH01A
Price: $21.95 (USD) 
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
Schwaben Open Barrel Crimping/Stripping Pliers

This Schwaben Crimping/Stripping 8 in 1 pliers feature:

  • 10" long handles
  • Rubber grip on handle
  • End wire cutter
  • Non Insulated crimper for 0.5, 2.5 and 4-6 
  • Open barrel non insulated for 1.5, 2.5 and 4-6
  • Insulated terminal 2.5-6MM, 1.5-2.5MM , 0.5-1.5MM
  • Wire stripper for AWG , 20,22,18.16,14,12,10
  • Bolt cutter size M2.6, M4, M5, M3.5, M3
Schwaben
Part #: 019639SCH01A
Price: $24.95 (USD) 
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
Schwaben Locking Hose Pinch-Off Pliers Pliers have adequate clamping force to seal large or pressurized cooling system hoses. These pliers are great for clamping shut most hoses. Swivel jaws ensure even clamping force. 
Schwaben
Part #: 009787SCH01A
Price: $18.95 (USD) 
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
Schwaben Black Mechanics Work Gloves - XXL

Perfect for any job when it comes to keeping your hands clean and protected.

Features:

  • High dexterity
  • Elastic hook and loop strap
  • Textured latex finger tips for grip
  • Breathable material
Schwaben
Part #: 010337SCH04A
Price: $9.95 (USD) 
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
Genuine BMW Union - 83300491087 Genuine BMW UNION
Genuine BMW
Part #: 83300491087
Price: $18.04 (USD) 
Ships on Aug 6, 2018
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
Schawaben Camshaft Timing Tool - M50 M52 S50 S52 M42 M44

If you have ever attempted to do a valve job or cylinder head gasket project on an M42, M44, M50, or M52 engine you know that the repair manual will refer to the special BMW timing tool kit. This tool kit includes a flywheel locating lock pin, and a special set of camshaft locators that lock the cams in a precise location. The tools are very easy to install. The kit is specifically designed to hold the engine and cams in proper timing during the cylinder head removal and re installation process. This avoids the chance of bending the valves doing the head install process. The precision ground holding blocks lock over the square ends of both intake and exhaust cams. The CNC machined flywheel locating pin passes through a hole in the rear of the engine block and passed through a machined hole in the flywheel.

To avoid improper cam timing on the latest BMW engines, the factory has devised a cam timing system that locks the crankshaft and cams into a specific position prior to cylinder head removal. This method was devised to avoid any misalignment, resulting in piston to valve damage. Unfortunately without these tools re-timing the camshafts after a valve job is almost impossible. The factory specification manual does not supply installation specifications. This cam timing kit includes all the necessary components to do the job.

This item fits the following BMWs:
1990-1991 E30 BMW 318i 318is 318ic
1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi


NOTE: Not compatible with S50B30 and S50B32 Euro engines!If you have ever attempted to do a valve job or cylinder head gasket project on an M42, M44, M50, or M52 engine you know that the repair manual will refer to the special BMW timing tool kit. This tool kit includes a flywheel locating lock pin, and a special set of camshaft locators that lock the cams in a precise location. The tools are very easy to install. The kit is specifically designed to hold the engine and cams in proper timing during the cylinder head removal and re installation process. This avoids the chance of bending the valves doing the head install process. The precision ground holding blocks lock over the square ends of both intake and exhaust cams. The CNC machined flywheel locating pin passes through a hole in the rear of the engine block and passed through a machined hole in the flywheel.

 

Schwaben
Part #: 003304SCH01A
Price: $84.95 (USD) 
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
Schwaben Telescoping Round Mirror

Great for working in tight spacers when you can't get a good eye on the issue.

 

Features:

 

  • Offers an 9-1/2" to 29" extendable handle with a stainless steel shaft
  • 2-1/4" mirror head mounted on a dual swivel for a full 360 degree rotation
  • Cushion grip rubber handle works great with dry or oily hands
Schwaben
Part #: 010772SCH01a
Price: $9.95 (USD) 
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
Rod Bolt Stretch Gauge with Billet Body & Thumb Hold We highly recommend using a stretch gauge when installing rod bolts and other fasteners, where it is possible to measure the length of the fastener. It is the most accurate way of measuring preload of any bolt. Simply follow manufacturer's instructions, or use the chart in the ARP catalog for ARP rod bolts.When using a stretch gauge it's best to measure the fastener prior to starting and monitor overall length during installation. When the bolt has stretched a specified amount, the correct preload or clamping force has been applied. We recommend that you maintain a chart of all rod bolts and make a note of the fastener length prior to installation and after any disassembly. If there is a permanent increase of .0005? or more in length, there is a deformation and the bolt should be replaced.
ARP
Part #: 100-9942
Price: $197.57 (USD) 
Ships on Aug 1, 2018
Free Shipping Free Shipping
Quantity:   
Schwaben 1/2

Looking to update your old torque wrenches? The Schwaben 3/8" Drive Digital Torque Wrench is your answer. 

This digital torque wrench uses an easy-to-read display to show torque amounts and settings, features a push button release, reversible 3/8" drive, 45 tooth ratchet head, and a comfortable no-slip grip and adjustment wheel.

Specifications:

  • Setting Range: 45-220 ft lbs (60-300 Nm)
  • Display Units: ft-lbs, N-m, Inch-lbs, cm-kg2, and m-kg
  • Size: 22" (550mm) length for easy leverage
  • Accuracy: +- 3%
  • Include blow molded holding case
  • Requires one 3V CR2030 battery (included)
Schwaben
Part #: 023380SCH01A
Price: $129.95 (USD) 
In Stock
Free Shipping Free Shipping
Quantity:   
Schwaben 7mm Hose Clamp Flexible Driver

Makes those hard to reach hose clamps much easier to loosen up.

Features:

  • 7mm driver
  • 6"  flex shaft
  • Overall length of 10-1/2"
  • No-slip grip resistant to wet or oil coated hands

 

Schwaben
Part #: 010658SCH01A
Price: $10.95 (USD) 
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
Schwaben 8mm Hose Clamp Flexible Driver

Schwaben has a solution to those hard to reach hose clamps with 8mm hex nuts. This 8mm driver features an overall length of 10-1/2" and a flex shaft length of 6". The ergonomic handle features a non-slip grip for when your hands are oily or wet.

8mm/ 5/16" are commonly found on aftermarket hose clamps. 

Schwaben
Part #: 010658SCH03A
Price: $10.95 (USD) 
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
Astro Pneumatic
Part #: AST9409A
Price: $51.99 (USD) 
In Stock
Quantity:   
Schwaben 3/8

Looking to update your old torque wrenches? The Schwaben 3/8" Drive Digital Torque Wrench is your answer. 

This digital torque wrench uses an easy-to-read display to show torque amounts and settings, features a push button release, reversible 3/8" drive, 45 tooth ratchet head, and a comfortable no-slip grip and adjustment wheel.

Specifications:

  • Setting Range: 15-80 ft lbs (20-110 Nm)
  • Display Units: ft-lbs, N-m, Inch-lbs, cm-kg2, and m-kg
  • Size: 16" (370mm) length
  • Accuracy: +- 3%
  • Include blow molded holding case
  • Requires one 3V CR2030 battery (included)
Schwaben
Part #: 023382SCH01A
Price: $109.95 (USD) 
In Stock
Free Shipping Free Shipping
Quantity:   
Schwaben Black Mechanics Work Gloves - Large

Perfect for any job when it comes to keeping your hands clean and protected.

Features:

  • High dexterity
  • Elastic hook and loop strap
  • Textured latex finger tips for grip
  • Breathable material
Schwaben
Part #: 010337SCH02A
Price: $9.95 (USD) 
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
Schwaben 6mm Hose Clamp Flexible Driver

Makes those hard to reach hose clamps much easier to loosen up.

Features:

  • 6mm driver
  • 6"  flex shaft
  • Overall length of 10-1/2"
  • No-slip grip resistant to wet or oil coated hands

 

Schwaben
Part #: 010658SCH02A
Price: $10.95 (USD) 
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
Gear Wrench Angled Hose Clip Pliers

Gear Wrench Angled Flat Band Hose Pliers part #:KDT-3977

  • Use pliers to remove and install flat-type hose clamps in hidden and hard-to-reach areas. 
  •  This tool is a variation of our popular 3976 Flat Band Hose Clamp Pliers and features 45º jaws with swivel tips to grip at any angle and pliers that latch securely in position. 
  •  Improved Spring Mechanisms is longer lasting and more durable 
  •  25% thicker gauge steel for stronger force without bending 
  •  Thicker Double Dipped Handle for greater comfort and Strength
Gear Wrench
Part #: KDT3977
Price: $26.49 (USD) 
In Stock
Quantity:   
Schwaben Black Mechanics Work Gloves - Medium

Perfect for any job when it comes to keeping your hands clean and protected.

Features:

  • High dexterity
  • Elastic hook and loop strap
  • Textured latex finger tips for grip
  • Breathable material

 

Schwaben
Part #: 010337SCH01A
Price: $9.95 (USD) 
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
Schwaben Telescoping Rectangular Mirror This rectangular mirror offers an 11" to 30 extendable handle with a stainless steel shaft, plus a 3.5" x 2" mirror head mounted on a dual swivel for a full 360 degree rotation. Cushion grip rubber handle works great with dry or oily hands. Easily locate hiding hardware.
Schwaben
Part #: 010770SCH01A
Price: $9.95 (USD) 
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
Schwaben Mechanics Stethoscope

This tool is ideal for finding unusual vibrations or suspected leaks. 

Features:

  • Aluminum alloy probe to determine noise location fast
  • Rubber trumpet to check for vacuum leaks and pressure flow noise
  • High quality surgical PCV hose for long life and increased sound definition
Schwaben
Part #: 005965SCH01A
Price: $19.95 (USD) 
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
Schwaben BMW Camshaft Alignment Tool Set

Performing work on the cylinder head, like timing or VANOS work? Having trouble with getting you camshaft aligned? This tool will contains an alignment fixture that will lock your camshaft and crankshaft at the correct position during assembly. This makes working on your cylinder head much easier, and you can rest assured knowing the work was performed correctly. This is a must have for anyone who loves to perform their own engine work. 

Features:

  • Included is top dead center pin to align flywheel at the dead center.
  • Convenient tool to tension the Timing Chain
  • Blow-molded case for easy storage
  • Two locking blocks

**Note: If you are conducting work on your timing chain, it will also require the timing chain tensioner tool.*

Schwaben
Part #: 003494SCH01A
Price: $149.95 (USD) 
In Stock
Free Shipping Free Shipping
Quantity:   
M52TU, M54 CAMSHAFT HELIX ALIGNMENT TOOL When installing an aftermarket camshafts into a M52TU, M54 engine you need to remove the helix from the stock camshafts and install it on the new camshafts. But the helix does need to be installed with the proper orientation. The proper helix to camshaft placement is important for timing. We developed this tool that does both intake and exhaust camshafts.

Clickhere for installation instructions.

Turner Motorsport
Part #: TMI9910454
Price: $32.69 (USD) 
$98.95
Limited Qty Sale
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
VANOS Solenoid 32mm Socket - E39 540i, E38 740i, E53 X5 4.4 (M62TU) On the M62TU engine the VAN0S solenoids on both banks are buried behind the timing covers. This makes it impossible to use a wrench on them. They're also an extra-large 32mm hex size which most people won't have in their toolbox. This socket is the factory BMW tool for removing the solenoids in the M62TU. It's a thin wall for easy access in the timing cover and a 1/2" drive.

When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.
Genuine BMW
Part #: 83300493363
Price: $71.01 (USD) 
Ships in 6 days
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
Schwaben Remote Starter Switch

Great for compression tests, aligning timing marks, belt installation and much more.

Features:

  • High 20 amp rating.
  • 5 ft heavy duty leads.
  • Convenient hot circuit indicator light.
  • Non-slip rubber grip.

 

Schwaben
Part #: 010611SCH01A
Price: $29.95 (USD) 
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
Schwaben Locking Hose Clamp Pliers

These Schwaben flexible reach hose clamp pliers can reach where others can not.

Feature:

  • Spring loaded clamp with a 24" cable
  • Designed to remove metal or plastic self-tightening hose clamps
  • Work with diameters from 11/16" to 2-1/2" ( 18 to 54mm)

These pliers feature a spring loaded clamp with a 24" cable and will lock onto the clamp and hold open for easy removal. These pliers are designed to remove metal or plastic self-tightening hose clamps with diameters from 11/16" to 2-1/2" ( 18 to 54mm).

Schwaben
Part #: 004170SCH01A
Price: $38.95 (USD) 
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
Schwaben Black Mechanics Work Gloves - XL

Perfect for any job when it comes to keeping your hands clean and protected.

Features:

  • High dexterity
  • Elastic hook and loop strap
  • Textured latex finger tips for grip
  • Breathable material
Schwaben
Part #: 010337SCH03A
Price: $9.95 (USD) 
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
  • 22 years of BMW Tuning.
  • Award winning service.
  • 10,000's of parts in stock.
  • Quality BMW Parts only.
  • Hassle-free returns.

  • Find us on Facebook