Bosch FK7KPP332 spark plug for N62 V8 4.8L engines. Listed as BMW part #'s 12122158252 and 12120032134. Over time spark plugs become contaminated, worn, and "fouled out". This can cause a weak or missing spark leading to issues with fuel efficiency, misfires, check engine codes, and poor idle or even direct damage to your catalytic converter. This OEM spark plug made by Bosch will restore OE spark plug operation and function, returning lost power and fuel efficiency.

Bosch is one of the largest OEM producers of Genuine BMW and aftermarket parts in the world, providing parts for almost every major automotive manufacturer. Bosch has likely supplied many of the original electrical (and mechanical) parts for your BMW. Thanks to their quality, high durability, and reliability, you should expect a long service life from Bosch products.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Diesel particulate filters can become clogged and less efficient with time when the DPF is unable to achieve it's needed temperature to start the automatic regeneration process, converting the soot to ash. This is common for cars that often see short trips that don't allow the engine and exhaust to heat up completely. Using a protector such as this routinely significantly helps to ensure the best power delivery possible as well as continued high fuel mileage by preventing the soot from restricting exhaust flow and overall performance. Liqui-Moly's Diesel Particulate Filter Protector allows the automatic regeneration process to start at a lower temperature, allowing the filter to be cleared earlier, preventing a loss of power and even a potentially expensive service fee.

Liqui-Moly is a German chemical company that offers top of the line engine oils, additives, and car care products that are designed to extend the life of your engine and ensure the best lubrication and cleanliness off engine and transmission components possible. With more than 50 years of experience and reviews across the world from magazines and race teams, Liqui-Moly proves time and time again why they are one of the most innovative lead forces of performance automotive chemicals in the world.

Liqui-Moly Top Tec 4110 Engine Oil (5w-40) - 1 Liter for your BMW

Upgrade your BMW with Turner Motorsport's Liqui-Moly Top Tec 4110 Engine Oil (5w-40) - 1 Liter. This top-class fully synthetic, low-SAPS motor oil features the latest additive technology, ensuring superior performance and efficiency in modern gasoline and diesel vehicles, whether equipped with or without particulate filters (GPF / DPF). It guarantees the lowest friction and outstanding protection even under tough operating conditions in high-performance engines.

Key Benefits:

• Outstanding lubrication reliability
• Rapid oil penetration
• Excellent high-pressure and wear protection properties
• Prevents the build-up of deposits
• Outstanding engine cleanliness
• Optimum stability to aging
• Reduces fuel consumption
• Compatible for use with turbochargers and catalytic converters

Specifications and Approvals:

• ACEA C3, API SN
• BMW Longlife-04 (LL-04) - Backwards compatible with Longlife-98 (LL-98) and Longlife-01 (LL-01)
• MB-Approval 229.31, MB-Approval 229.51, MB-Approval 229.52
• Porsche C40
• VW 511 00

Recommended for Specifications:

• GM dexos2
• MB 226.5
• Renault RN 0700, Renault RN 0710

Specifically developed for selected gasoline and diesel engines of the latest generation. Tested safe with catalytic converters and turbochargers. Depending on the manufacturer's instructions, extended oil change intervals can be achieved.

Founded more than 50 years ago, Liqui Moly GmbH from Ulm in southern Germany offers a wide variety of high-quality products including motor oils, additives, car care products, and chemically-based technical solutions for automotive applications. Liqui Moly develops and tests its products in its own laboratories, manufactures only

Genuine AdBlue DEF Fluid - 1 Liter

Enhance the performance of your BMW diesel engine with Genuine AdBlue DEF Fluid - 1 Liter. This diesel exhaust fluid is essential for maintaining emissions compliance and reducing harmful pollutants. With its high-quality formulation, Genuine AdBlue DEF Fluid ensures optimal efficiency and cleanliness of the selective catalytic reduction (SCR) system. Regular use of this fluid helps prolong the lifespan of your BMW's emissions system, ensuring smooth and environmentally friendly operation.

• Maintains emissions compliance and reduces pollutants
• High-quality formulation for optimal efficiency
• Ensures cleanliness of the selective catalytic reduction (SCR) system
• Prolongs the lifespan of the emissions system
• Supports smooth and environmentally friendly operation

Keep your BMW's cooling system in top condition with DEI's Radiator Relief™ Cooling System Flush. This concentrated cleansing agent effectively removes rust and mineral deposits from the radiator core and hose lines, restoring efficiency. Additionally, it dissolves oily residue build-up left by old antifreeze and coolant mixtures, ensuring optimal performance. Simple to use and 100% biodegradable, this flush is recommended for use with distilled water to maintain optimum efficiency. Note that it is intended for a complete coolant flush and should not be added to existing coolant.

Benefits:

• Removes rust deposits from radiator core and hose lines
• Dissolves oily residue for improved performance
• Restores cooling system efficiency
• Simple to use
• 100% biodegradable

Top Tec 4200 is an advanced low-friction motor oil designed for year-round use in both gasoline and diesel engines, including those equipped with diesel particulate filters and extended maintenance intervals. This motor oil, formulated with innovative base oils derived from synthesis technology and the latest additive advancements, delivers exceptional wear protection, reduces oil and fuel consumption, and ensures rapid oil circulation within the engine.

Key Features:

• Promotes smooth engine operation.
• Enhances engine longevity through superior wear protection.
• Facilitates quick oil flow in cold temperatures.
• Maintains optimal oil pressure across all engine speeds.
• Ensures reliable lubrication in both high and low-temperature conditions.
• Exhibits high shear and aging stability.
• Reduces fuel usage and pollutant emissions.
• Upholds engine cleanliness.
• Compatible with catalytic converters and performance-proven with turbochargers.

Approved Specifications:

• ACEA C3
• BMW Longlife-04
• MB-Approval 229.51
• Porsche C30
• VAG 504.00 / 507.00

Recommended Specifications:

• ACEA A5/B5/C2; A3/B4
• API SM/CF
• BMW Longlife-01 / Longlife-01FE
• MB 229.31
• VAG 500.00 / 501.01 / 502.00 / 505.00 / 505.01 / 503.00 / 503.01 / 506.00 / 506.01

With a legacy spanning over 50 years, Liqui Moly GmbH, headquartered in Ulm, southern Germany, offers a wide range of top-quality products, including motor oils, additives, car care solutions, and chemical-based technical products for automotive applications. Liqui Moly's products are developed and rigorously tested in their own laboratories, proudly manufactured in Germany, and are held in high regard within the automotive industry.

This all-encompassing tool kit facilitates the removal and reinstallation of the transfer case mount, providing adapters and other essential components for the task at hand. Tailored for a diverse range of BMW models equipped with AWD or xDrive systems, the kit is thoughtfully packaged in a plastic blow-molded carrying case.

Applications: X3, X5, X6, 530xi, 525xi, 325xi, 330xi, 328xi, 528xi, 535xi, 335xi, X6, 528i xDrive, 535i xDrive, 328i xDrive, 335i xDrive, and X1.

Turner Motorsport recommends flushing and replacing your manual transmission and differential fluid regularly to ensure proper component wear and prevent costly issues in the future. Refer to your owner's manual for specific intervals for flushing and refill.

Liqui Moly Gear Oil for your BMW

This fully synthetic 75w90 weight gear oil is designed to maintain smooth shifting in your transmission. Its unique multi-viscosity formula provides excellent protection in all weather conditions. Being fully synthetic, it guarantees smoother shifts across all vehicles.

Note: Verify that your application requires GL4 oil. This product meets API GL-4+ specifications.