Select Vehicle
BMW
Mini
Create an account to be able to build Wish Lists.
Please ensure your correct model is selected
Replace the flimsy plastic bleeder screw used in the coolant expansion tank or in one of the cooling system hoses with this high quality, durable, aluminum bleeder screw. The stock plastic screw can deform over time due to heat or even regular use. We have even seen the head of the screw snap off, leaving the threaded body stuck in the expansion tank. This aluminum screw will help to prevent sudden failure of the bleeder screw, which can result in immediate overheating of the car.
ECS Tuning's Aluminum Coolant Bleeder Screw replaces Genuine BMW Part Number 17111712788
Ensure a secure connection between the downpipe and the turbo in your BMW with the Genuine V-Band Exhaust Clamp 11658585233. This high-quality clamp provides a reliable mount, ensuring optimal performance and exhaust system integrity.
This paint is a perfect match for the BMW Black Sapphire Metallic, paint code 475. Not to be confused with non-metallic black.
Includes:
12ml base coat
12ml clear coat
This caliper bushing kit will eliminate flex caused by weak rubber caliper bushings. As the brake pedal is pressed the caliper grabs the rotor and twists on its mounting bushings. The rubber bushings allow the caliper to deflect and twist which affects pedal feel and results in uneven pad wear. These solid brass bushings will not twist or deflect so your calipers can squeeze the pads evenly on both sides of the rotor (sort of like what multi-piston big brakes do). This will give you much longer pad life and a more consistent pedal feel. This is the most complete kit we have ever sold with stainless steel caliper slide bolts, o-rings, and new dust boots. Unlike other kits, these bushings are pressed into the caliper and will not shift or slide on their own.
Installation is straightforward: remove the old rubber bushings and press in the new brass bushings (we recommend special tool 003326ECS03). High temp caliper grease or anti-seize is required. The new bushings include an inner o-ring that helps trap grease on the slide bolt, reducing friction and wear.
***Click here for installation instructions***
***Click here for the installation tool***
For most models with floating calipers. Fits the rear of E90/2 and E60, but for the front you'll need the kit found here. Does not fit E30 models with Girling calipers, but is compatible with Ate calipers.
Enhance wheel replacement efficiency on your BMW with a stud conversion kit, facilitating quicker and easier wheel changes. This comprehensive kit includes:
The installation of these studs provides a permanent wheel-hanging solution, saving time and reducing hassle during wheel changes. By simply screwing in the supplied studs, you'll be ready to go.
Benefits of using wheel studs instead of wheel bolts:
Note: Use thread-locking compound during installation and torque studs to 15Nm for optimal performance.
Upgrade your BMW's wheel system with this stud conversion kit for improved convenience and functionality.
Your floor jack is universal but it doesn't have to be with this adapter! Most newer BMW jack pads have an open recess inside that this adapter fits into. It's a rectangular peg for a rectangular hole. This gives the jack a much more rigid connection and almost impossible for the jack or pad to slip. You will never have to worry about scratching your rocker panels or jacking from the wrong spot - the positive connection ensures you are always lifting from the correct location. This adapter is one of those small hidden gems that you can't live without!
Made of black anodized aluminum for added strength and corrosion resistance, the adapter fits the head of most hydraulic floor jacks, including the Schwaben Low Boy.
Compatible with most BMW jack pads for chassis E39 and up. Retrofitting jack pads is common, especially on E36/Z3 models.
Pentosin CHF 11S hydraulic oil is a specially designed synthetic oil crafted for various vehicle hydraulic systems. It serves power steering, level control, hydraulic suspension, and shock absorbers. With a broad temperature tolerance, it suits both hot and cold climates exceptionally well. Meeting DIN 51 524T3 and ISO 7308 specification standards, this oil ensures quality and performance.
Regular maintenance, including fluid drain, flush, and refill of the steering fluid, removes contaminants and revitalizes fluid additives. This process safeguards against abrasion, chemical attacks, and corrosion, ensuring system longevity and efficiency.
Genuine BMW hex bolt. M12X1,5X28
Be sure to replace your hardware with any flywheel removal service such as the rear main seal or clutch and flywheel.
Upgrade your BMW's performance with ECS Titanium Wheel Bolts, designed for weight savings and durability. These premium bolts are perfect for performance enthusiasts seeking high-quality components that won't rust. Crafted from annealed titanium alloy, they offer a significant weight reduction of 50% compared to steel bolts of the same size, reducing rotational mass for improved performance.
Installs bushings straight and true with minimal effort. Includes tools for both iron and aluminum calipers. Purchase only one tool set for your entire caliper guide bushing upgrade - tools are not one time use.
***Click here for installation instructions***
Optimize your BMW's wheel change process with a stud conversion kit, delivering faster and simpler wheel swaps. This kit consists of Conical Seat Lug Nuts (20) and 82mm Wheel Studs (20), providing permanent wheel hangers, saving time, and streamlining the process.
Note: Thread-locking compound is recommended during installation. Studs should be torqued to 15Nm. These studs may be used with spacers up to 20mm.
Designed for precision and reliability, this injection valve ensures optimal fuel delivery, enhancing engine efficiency and power. Trust Genuine BMW parts for seamless integration and long-lasting performance.
Elevate your custom installation with the ECS -10AN O-Ring Boss fitting, a crucial component that connects your ECS Tuning Catch Can to a 3/4" ID hose. This fitting simplifies your plumbing setup, ensuring a seamless solution.
Featuring a pre-installed Viton O-ring, this fitting is engineered for excellence, providing a leak-proof seal that resists the effects of oil and fuel exposure, guaranteeing long-term durability.
The 3/4" nipple is thoughtfully designed with barbs to secure hose position effectively, minimizing the risk of hose disconnection. Keep in mind that clamps and hoses are available for separate purchase. These fittings are sold individually, with most installations requiring a pair of them.
ECS Tuning offers a solution to safeguard your prized wheels with Wheel Lock sets. Ensure the protection of your expensive wheels without costly modifications. These wheel locks replace one of your wheel bolts and come with a special socket tool for easy removal, included in each kit. With a bolt length of 38mm and conical seat design, they are compatible with most aftermarket wheels and are intended to be used with 10mm. However, please note that they are not suitable for use with wheel bolt caps. Each set includes a unique wheel lock key with an outer diameter of 26mm, designed to fit the bolts in only one specific orientation.
Product Details:
Protect your valuable wheels from theft
No need for expensive alterations
Bolt length: 38mm
Conical seat design for compatibility with most aftermarket wheels
Special socket tool included for easy removal
Unique wheel lock key provided in each set
Genuine BMW Hypoid Axle Oil G1 - 0,5L
ECS Tuning offers Wheel Lock sets, providing extra security and peace of mind for your precious wheels without requiring expensive modifications. Whether you've spent months perfecting the look of each spoke or years searching for the ideal one-off wheel, the last thing you want is to risk wheel theft.
Each Wheel Lock set includes special socket tools to remove the locks, ensuring that your wheels remain safe and sound. These 28mm factory bolt length, conical seat bolts are designed to work seamlessly with most aftermarket wheels. Please exercise caution and avoid over-tightening or using air tools. Note that lock keys are uniquely oriented to fit specific bolts.
Upgrade your BMW's integrity and performance with the Genuine BMW Hex Bolt With Washer M8X94 - 11117834142 - E60 M5,E63 M6. Crafted to exacting standards, this authentic hex bolt ensures secure fastening and durability for your BMW E60 M5 or E63 M6. Engineered for precision, it offers peace of mind knowing your BMW is equipped with genuine parts. Whether you're conducting routine maintenance or performing repairs, trust Genuine BMW Hex Bolts to maintain the structural integrity and performance of your BMW.