BMW 1 Series E82 (2008-2013)

Clear BMW chassis

Please ensure your correct model is selected

Sub-Categories

Sort By:

AeroCatch - Corporate Logo
T#:340098
Part#: AEROCATCH
In Stock
$ 566.99

This product was last offered at the strikethrough price on
05-13-2026

Starting at $ 82.99 USD
Free Shipping
Starting at $ 82.99 USD
Free Shipping
As used by Turner Motorsport on our championship winning BMW race cars, the new aerodynamically efficient and aesthetically styled AeroCatch is setting new standards in hood fixing for the 21st century. Say goodbye to your standard hood pins -- these are better all around.
Show More Show Less
KMAC - Corporate Logo
T#:389645
Part#: 192416-1J
In Stock
$ 380.00 USD
Free Shipping
$ 380.00 USD
Free Shipping
Location: Front
Type: Street, Stage 1
Bearing: captive-ball fully encased in polyurethane

These front adjustable camber/caster plates will replace your stock front upper strut bearing. The KMAC plates are a 'floating' design so camber and caster are adjusted together. This design allows maximum range of adjustment since no other hardware interferes with the adjustments. Since these replace your stock strut bearings they are designed to work with a stock-type spring only. And when installed correctly will not significantly alter ride height. Adjustment is easily done by loosening the three nuts on top of the tower and sliding the camber plate into the position you want, then re-tighten the nuts. These mounts can be installed two ways - for camber correction or swapped side-side for increasing negative camber. Detailed instructions included.

Note: suspensions vary from manufacturer to manufacturer. Turner Motorsport cannot be responsible for fitment issues caused by non-stock or specialized coil-over suspensions. As with any race-derived component, additonal fabrication may be required.

This item fits the following BMWs:
2008-2012  E82 BMW  128i 135i
6/1992-1999  E36 BMW  318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005  E46 BMW  323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
2006-2011  E90 BMW  325i 328i 330i 335d 335i - Sedan
2006-2012  E91 BMW  328i - Wagon
2007-2013  E92 BMW  328i 335i 335is - Coupe
2007-2013  E93 BMW  328i 335i - Convertible
1997-2003  E39 BMW  525i 528i 530i 540i (not for cars with EDC)
2004-2010  E60 BMW  525i 530i 528i 535i 545i 550i
2004-2011  E63 E64 BMW  645ci 650i
1997-2002  Z3 BMW  Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008  E85 BMW  Z4 2.5i Z4 3.0i Z4 3.0si
2009+  Z4 BMW  Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
2000-2003  E52 BMW  Z8 Roadster (without EDC)
Show More Show Less
QuickJack - Corporate Logo
T#:913727
Part#: 5210199
Ships in 4 Business Days
$ 66.00 USD
Free Shipping on orders $49 and up

Wall Hangers Set is the ideal solution for organizing and storing QuickJack frames in a garage. Designed for those who prefer a clean and efficient storage solution, these hangers provide a convenient way to keep your portable car lift frames off the ground and out of the way. The hangers mount directly into a sturdy wall stud, ensuring safe and simple storage for all QuickJack models. Each mount is crafted with a sleek, laser-cut QuickJack logo, affirming its authenticity and quality.

  • Secure storage: Mounts directly into wall studs for safe and stable hanging of QuickJack frames.
  • Universal fit: Accommodates all QuickJack models, ensuring versatility and convenience.
  • Durable construction: Over-engineered to 150% of the rated capacity for long-lasting durability.
  • High-quality materials: Made from brushed steel for a robust and stylish appearance.
  • Authentic design: Features a sleek, laser-cut QuickJack logo, reflecting its official status and rigorous engineering standards.
  • Easy installation: Simple to install, with real-world testing and advanced computer analysis ensuring reliability and resilience.

Upgrade your garage organization with the Wall Hangers Set for a neat, secure, and professional storage solution for your QuickJack frames.

Show More Show Less

JB Racing - Corporate Logo
T#:2801
Part#: 520-200-240
In Stock
$ 714.00 USD
Free Shipping
$ 714.00 USD
Free Shipping
Aluminum flywheels are much lighter than the stock steel flywheel and that produces better throttle response and more available horsepower to the wheels for faster acceleration. The JB Racing aluminum flywheels are a direct replacement for the stock flywheel and work with stock clutch components for an easy upgrade with very little downside.

Modern flywheels are built with additional components and features that are designed to dampen and minimize vibrations from the engine and transmission. As a result they have become bloated in weight and that means more energy is used up just making the flywheel spin. The weight difference between an aluminum and steel flywheel is huge - sometimes more than 50% less. Without the additional mass, more energy can be diverted to where it counts most - moving the car. The flywheel and clutch is one of the first areas that engine builders address when making the rotating assembly lighter for race engines. The dampening effect is just not needed on cars that are focused on performance.

In addition to releasing more power to the wheels, the lighter flywheel allows the engine to spin more freely, which improves throttle response. Again, the difference is huge as you watch the revs build faster than before. With the engine spinning easier the power band comes up much sooner. The stock steel flywheel feels lazy in comparison. There is a driving adjustment required to get used to how much faster the engine revs but that's not really a downside.

The JB lightweight flywheel is designed to be used with a factory organic clutch - the same clutch kit that you would get from any BMW dealer. This makes replacement clutch components easy to source and inexpensive when compared to specialized racing clutches. By using the factory BMW clutch, JB has also made the whole assembly easy to live with when used on the street. The clutch behaves the same as it originally did - just with better throttle response and more power! The JB flywheel can also be rebuilt with a new clutch contact surface - you don't have to buy a new flywheel.

Aluminum flywheels are considered 'single-mass' flywheels because they do not have the same dampening designs as an original 'dual-mass' flywheel. With a single-mass design more noise and vibration may be noticeable. There are steps you can take to minimize the noise - heavier weight transmission oil and clutch discs with anti-rattle springs (sprung-hub clutch).

This JB flywheel replaces the stock flywheel and can be used with either the stock 228mm or stock 240mm clutch discs. Depending on the model you may have either clutch size in your car but this flywheel is compatible with both. You can install a 240mm clutch as a mild upgrade.

Stock Flywheel Weight = 24-31.0lbs
JB Flywheel Weight = 12.0lbs

This item fits the following BMWs:
2006-2010 E60 BMW - 525i, 528i, 530i
2006-2013 E90, E91, E92, E93 BMW - 325i, 328i, 330i
2007-2013 E82 BMW - 125i, 128i
2006-2008 E85, E86 BMW - Z4 3.0i, Z4 3.0si
2009-later E89 BMW - Z4 3.0i
Show More Show Less

QuickJack - Corporate Logo
T#:403120
Part#: 5150561
Ships in 4 Business Days
$ 236.00 USD
Free Shipping
$ 236.00 USD
Free Shipping

Due to clearance issues, many types of lifts require specific adapters that are made for reaching SUV and truck jack points. This 12-piece kit has been made by using stackable adapters that mount inside the lifting block trays so that vehicles with high ground-clearance or those with unique jack point locations are better accommodated. These adapters offer up to 7.2" of additional height when all combined.

Complete kit includes:

  • Low‐profile round polyurethane contact pads  -  Qty: 4
  • Sliding receivers that accommodate the round polyurethane contact pads and/or the stackable adapters  -  Qty: 4
  • 3" stackable adapters.  -  Qty: 4

Fits BL-5000SLX/EXT and BL-7000SLX/EXT Series Only.

Show More Show Less
QuickJack - Corporate Logo
T#:403152
Part#: 5550033
Ships in 4 Business Days
$ 60.00 USD
Free Shipping on orders $49 and up

Male & female quick-connect fittings conveniently connect the leader hoses to the long hoses, making it easy to assemble and disassemble QuickJack after the simple one-time setup.

Each flush-face, zero-leak fitting is designed to prevent hydraulic oil or ATF from leaking, ensuring your frames function properly at all times.

Male fitting does NOT attach to QuickJack power unit.

Compatible with all SLX and TL models.

Show More Show Less

QuickJack - Corporate Logo
T#:3150961
Part#: 5210259
Ships in 4 Business Days
$ 30.00 USD
Free Shipping on orders $49 and up
Urethane rubber is an ultra-durable material that, compared to other rubber types and plastic, produces much less noise when it rolls across hard surfaces. Sold in sets of 4.
SACHS Performance - Corporate Logo
T#:1802
Part#: 883082001243
In Stock
$ 544.99

This product was last offered at the strikethrough price on
03-25-2026

$ 526.99 USD
Free Shipping on orders $49 and up
$ 526.99 USD
Free Shipping on orders $49 and up

Experience longer life and less slippage with this Sachs Performance pressure plate for use with sport/racing clutch discs. This pressure plate offers more clamping power, and is recommended for cars making significantly more hp than stock (forced injection, etc) while using a stock flywheel. This is NOT for use on cars with an aftermarket flywheel (stock flywheel only).

Sachs Performance is the racing and performance oriented selection of high quality parts from Sachs and ZF Engineering. Supplying countless brands with OE parts and offering one of the widest selection of OEM replacement parts, they are known for their exceptionally high quality products. You can purchase these performance parts with confidence, knowing they will resist heavy wear and tear for much longer than most other aftermarket options.

Show More Show Less

QuickJack - Corporate Logo
T#:403116
Part#: 5300861
Ships in 4 Business Days
$ 76.00 USD
Free Shipping
$ 76.00 USD
Free Shipping

These QuickJack rubber contact blocks are used with all QuickJack systems and can be used with other QuickJack pads or are perfect to replace missing pads.

These blocks are made of a hardened rubber that has specifically been formulated to resist gouging, cutting, and abrasion. They are also resilient against chemicals and solvents that would normally damage rubber.

Dimensions: 6.5" long x 1.5" tall x 4" wide

Show More Show Less

KMAC - Corporate Logo
T#:389667
Part#: 193926K
Ships on Oct 2, 2026
$ 480.00 USD
Free Shipping
$ 480.00 USD
Free Shipping
Rear adjustable camber and toe bushings for the E82/E9X non-M 3-series. These bushings allow you to adjust camber and toe beyond factory specs to either restore camber or add more. If you lowered your car and have too much camber these bushings can get you back to stock specs. On the flip side if you need more camber for the track or autocross, you can fine tune it with these too. These bushings press in and replace the existing rubber bushings. They are made from peformance urethane which will give more feedback and response to the driver. Sold as a set with a bushing extraction tool included.

Fits the following BMWs:
E82/88 BMW 2 Series
E89 BMW Z4
E9X BMW Non-M
Show More Show Less
Spec-D Tuning - Corporate Logo
T#:20946739
Part#: 2LHPE8708TM
Ships in 6 Business Days
$ 322.99 USD
$ 322.99 USD
Features Include: Brand new in original box New Euro-style LED strips for the European look! Matte Black Housing - Clear lens dual halo projector headlights with LED light strip Made by an ISO-certified manufacturer using materials that meet strict OEM requirements
Show More Show Less


Spec-D Tuning - Corporate Logo
T#:20946738
Part#: 2LHPE8708JMTM
In Stock
$ 282.99 USD
$ 282.99 USD
Features Include: Brand new in original box New Euro-style LED strips for the European look! Matte Black Housing - Clear lens dual halo projector headlights with LED light strip Made by an ISO-certified manufacturer using materials that meet strict OEM requirements
Show More Show Less
SACHS Performance - Corporate Logo
T#:393840
Part#: 881864999533
In Stock
Sale - Save 11% $ 499.00

This product was last offered at the strikethrough price on
05-14-2026

$ 442.66 USD
Free Shipping
Sale - Save 11%
$ 499.00

This product was last offered at the strikethrough price on
05-14-2026

$ 442.66 USD
Free Shipping

Looking to upgrade your clutch disc? This Sachs Performance clutch disc is a great option. Allowing for higher torque and horsepower, this disc is perfect for aggressive track applications such as endurance racing, clubsport, autocross, hill climbing and 1/4 mile racing.

Sachs Performance is the racing and performance oriented selection of high quality parts from Sachs and ZF Engineering. Supplying countless brands with OE parts and offering one of the widest selection of OEM replacement parts, they are known for their exceptionally high quality products. You can purchase these performance parts with confidence, knowing they will resist heavy wear and tear for much longer than most other aftermarket options.

Show More Show Less
BMC - Corporate Logo
T#:398689
Part#: FB494/20
In Stock at Vendor
$ 100.99 USD
Free Shipping
$ 100.99 USD
Free Shipping
Looking to upgrade your air filter for increased flow and performance? BMC filter allow significantly higher air flow and are perfectly molded in one piece to fit exactly the same as your stock air filter. These filters are constructed from multi-layerd cotton gauze that is pre-oiled and can be cleaned and regenerated using the BMC regeneration kit.
Show More Show Less

QuickJack BL-3500SLX - 3,500 Lb. Capacity - 110 Volt (60Hz)
Please confirm compatibility with vehicle using the "Measuring Guide Worksheet" under the "Installation" tab prior to ordering.
QuickJack - Corporate Logo
T#:403178
Part#: BL-3500SLX
Ships in 4 Business Days
Starting at $ 1,925.00 USD
Free Shipping
Starting at $ 1,925.00 USD
Free Shipping
The BL-3500SLX has a maximum lifting capacity of 3,500-lb. But its true strength is that you can take it with you. The QuickJack is so light-weight and space-efficient that you can transport it in your regular sized trunk or backseat. It also takes seconds to get up and running following initial one-time assembly. Just drop it on the ground and hook-up the power. As soon as the jack frames and rubber blocks are in place under your vehicle, it'll be at a work-ready height in no time at all.
Show More Show Less

QuickJack - Corporate Logo
T#:403118
Part#: 5300862
Ships in 4 Business Days
$ 130.00 USD
Free Shipping
$ 130.00 USD
Free Shipping

These QuickJack rubber contact blocks are used with all QuickJack systems and can be used with other QuickJack pads or are perfect to replace missing pads.

These blocks are made of a hardened rubber that has specifically been formulated to resist gouging, cutting, and abrasion. They are also resilient against chemicals and solvents that would normally damage rubber.

Dimensions: 4" long x 3" tall x 3" wide

Show More Show Less
Active Autowerke - Corporate Logo
T#:340366
Part#: N55CP-KIT
Ships in 3 Business Days
Starting at $ 189.99 USD
Free Shipping
Starting at $ 189.99 USD
Free Shipping
One major weak point in the N55 turbo plumbing is the stock upper chargepipe from the intercooler outlet to the intake manifold. The original N55 charge pipe is made from a weak plastic and can fail with even stock boost levels. The most common problem is a crack that develops along a seam where the pipe connects to the throttle body. Any crack here is bad as it creates a massive vacuum leak and the engine electronics will put the car into limp mode. If you don't want to be sidelined there is a very simple fix - the Active Autowerke N55 charge pipe.

This aluminum pipe is much stronger and more durable and nearly indestructable for the N55 application. It uses a CNC-machined factory-style connection and o-ring to the throttle body to ensure a tight and leak-free seal. The piping is a consistent 3" diameter for better flow and an improved throttle response. AA has included a raised boss with two ports should you choose to add a water/meth injection system later. The factory MAP sensor installs in the same location and the pipe is powdercoated black for a factory-type appearance.

With a stronger pipe you don't have to worry about the infamous chargepipe crack and lost boost levels and horsepower. All of the boost in the world is useless if it's leaking so using beefed up components in place of the weak factory pieces is the smart way to consistently high power output.

This item fits the following BMWs with the N55 engine:
2011-2012 E82 BMW 135i
2011 E90 BMW 335i 335xi 335i xDrive - Sedan
2011-2013 E92 BMW 335i 335is 335xi 335i xDrive - Coupe
2011-2013 E93 BMW 335i - Convertible
Show More Show Less

Active Autowerke - Corporate Logo
T#:4416
Part#: AABOVKIT-N54
In Stock
$ 565.99

This product was last offered at the strikethrough price on
09-01-2026

$ 529.99 USD
Limited Qty Sale
Free Shipping
$ 565.99

This product was last offered at the strikethrough price on
09-01-2026

$ 529.99 USD
Limited Qty Sale
Free Shipping
As Used on Project E92 335i
When adding boost to the N54 engine, it's important to consider effects throughout the rest of the system. Additional boost can overwhelm the stock BMW diverter valve system and lead to boost leakage, or boost spikes, and lost horsepower. With the factory components in place it's hard to maintain consistently high boost levels. Instead of the weak plastic components of the stock system, Active Autowerke uses a CNC-machined and mandrel-bent aluminum tube with a Venturi blow-off valve in place of the original diverter valves. The blow-off valve dumps overboost into the atmosphere for that distinctive turbo 'whoosh' sound. The single AA BOV is over-sized for the N54 application - taking the place of the two small diverter valves, and verified to handle over 600hp. With the BOV acting properly your turbos and other components are protected from compressor surge caused by excess pressure build-up.

We like the Active BOV better than other forms of diverter and BOV kits because it's tried and true - AA was the original turbo BMW tuners and their experience is second to none. That's why they took the time to engineer their kit to fit perfectly, using the OE-type connector to the throttle body, and high-strength silicone to the lower intercooler tube. Each connection is a tight, leak-free seal. The kit comes complete with the discharge tube, vacuum plugs for the stock hoses, and instructions. The tube is powdercoated in black and with a wrinkle finish for an OE appearance.

This item fits the following BMWs with N54 engine:
2008-2010 E82 BMW 135i 1M
2007-2010 E90 BMW 335i 335xi 335i xDrive
2007-2010 E92 BMW 335i 335is 335xi 335i xDrive
2007-2010 E93 BMW 335i
Show More Show Less
QuickJack - Corporate Logo
T#:403154
Part#: 5570202
Ships in 4 Business Days
$ 56.00 USD
Free Shipping on orders $49 and up
Replacement short hydraulic hose - 2 required

QuickJack - Corporate Logo
T#:840366
Part#: 5300011
Ships in 4 Business Days
$ 100.00 USD
Free Shipping
$ 100.00 USD
Free Shipping
Round pinch-weld pucks are specifically designed to handle even more difficult-to-reach pinch-weld rails, while protecting your car.

BMC - Corporate Logo
T#:398704
Part#: FB630/20
In Stock at Vendor
$ 95.99 USD
Free Shipping
$ 95.99 USD
Free Shipping
Looking to upgrade your air filter for increased flow and performance? BMC filter allow significantly higher air flow and are perfectly molded in one piece to fit exactly the same as your stock air filter. These filters are constructed from multi-layerd cotton gauze that is pre-oiled and can be cleaned and regenerated using the BMC regeneration kit.
Show More Show Less
Active Autowerke - Corporate Logo
T#:590914
Part#: AASIGNATUREPLAQU
Ships in 3 Business Days
4% off MSRP $ 45.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 43.00 USD
Free Shipping
4% off MSRP
$ 45.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 43.00 USD
Free Shipping
Stand out from the crowd, and give them a hint of what you've got going on under the hood, with the official Active Autowerke Signature Emblem! The emblem can be placed anywhere on the exterior, or interior of your BMW. Hefty stainless steel construction and durable double-sided tape will help ensure that it is never lost, even at speeds over 170+ MPH...Don't ask us how we know! Represent your favorite BMW tuner for all to see today!
Show More Show Less
QuickJack - Corporate Logo
T#:40714793
Part#: 5176009
Ships in 4 Business Days
$ 2,450.00 USD
Free Shipping
$ 2,450.00 USD
Free Shipping
This QuickJack package deal includes the 8000TL vehicle lift, a set of QuickJack wall hangers (T#913727), and an SUV & Light Truck Adapter set (T#403120). See full listing for more details!


QuickJack - Corporate Logo
T#:40748606
Part#: 6000TLX
Ships in 4 Business Days
Starting at $ 2,125.00 USD
Starting at $ 2,125.00 USD
The 6000TLX has a maximum lifting capacity of 6,000-lb. It is the highly anticipated sequel to QuickJack's popular 5000TLX car lift. With its extended lift point reach of 6 inches more than the 6000TL for longer wheelbases and the ability to lift an extra 3 inches, the 6000TLX portable car lift provides more room to tackle every repair and maintenance task on vehicles weighing up to 6,000-lbs. It also takes seconds to get up and running following initial one-time assembly. Just drop it on the ground and hook-up the power. As soon as the jack frames and rubber blocks are in place under your vehicle, it'll be at a work-ready height in no time at all.
Show More Show Less
QuickJack - Corporate Logo
T#:403151
Part#: 5325768
Ships in 4 Business Days
$ 36.00 USD
Free Shipping on orders $49 and up
Hydraulic dust caps are included with every purchase of the QuickJack portable car lift system, and additional sets can be purchased here.
Active Autowerke - Corporate Logo
T#:341887
Part#: 135N55CP-KIT
Ships in 3 Business Days
$ 189.99 USD
Free Shipping
$ 189.99 USD
Free Shipping

QuickJack - Corporate Logo
T#:403117
Part#: 5300863
Ships in 4 Business Days
$ 86.00 USD
Free Shipping
$ 86.00 USD
Free Shipping

These QuickJack rubber contact blocks are used with all QuickJack systems and can be used with other QuickJack pads or are perfect to replace missing pads. If the blocks included with the QuickJack lift system have a hard time reaching the jack points of the vehicle, these can be used to help properly reach and support the vehicle on the lift.

These blocks are made of a hardened rubber that has specifically been formulated to resist gouging, cutting, and abrasion. They are also resilient against chemicals and solvents that would normally damage rubber.

Dimensions: 4" long x 2" tall x 3" wide

Show More Show Less

Active Autowerke - Corporate Logo
T#:388675
Part#: 340366TCKD4AMN6T
Ships in 3 Business Days
$ 189.99 USD
Free Shipping
$ 189.99 USD
Free Shipping
QuickJack - Corporate Logo
T#:403155
Part#: 5570216
Ships in 5 Business Days
$ 56.00 USD
Free Shipping
$ 56.00 USD
Free Shipping
Replacement long hydraulic hose - 2 required

QuickJack - Corporate Logo
T#:40342807
Part#: 5176113
Ships in 4 Business Days
$ 2,500.00 USD
Free Shipping
$ 2,500.00 USD
Free Shipping
This QuickJack package deal includes the 8000TLX extended vehicle lift, a set of QuickJack wall hangers (T#913727), and an SUV & Light Truck Adapter set (T#403120). ​The 8000TLX extended vehicle lift has a maximum lifting capacity of 8,000-lb. It is the highly anticipated sequel to QuickJack's beloved 7000TLX. With the ability to lift an extra 3-inches, the 8000TLX portable car lift provides more room to tackle every repair and maintenance task on vehicles weighing up to 8,000 lbs. The longer frames and 66" lift point make this kit perfect for larger SUVs and trucks. It also takes seconds to get up and running following initial one-time assembly. Just drop it on the ground and hook up the power. As soon as the jack frames and rubber blocks are in place under your vehicle, it'll be at a work-ready height in no time at all. Working in a garage can become troublesome when stuck with only a jack and a few jack stands. Not only are jack-stands very unsteady at raised heights, it also requires the long, tedious process of raising each corner individually. Eliminate this issue with a vehicle lift that is unlike any other lifting system you have seen! QuickJack can raise your vehicle with the push of a button, raising your vehicle to the lift's maximum height in just seconds. This allows you complete access to service your vehicle's suspension, drivetrain, and underbody, without any crossbeams to get in your way. Also, keeping safety paramount, QuickJack uses rugged, welded steel construction for strength and rock-solid stability, and features auto-locking bars that lock the lift and vehicle at a set height until you are finished. This ensures the lift will never fail with you underneath, standing up to the toughest real-world garage and track conditions. ​Through superior engineering and design, QuickJack has been able to produce an extra 3-inches of lifting height without sacrificing the overall dimensions that have made QuickJack a must-have in your garage. 8000TLX still has an impressive 3.5" lowered height, 76" overall length, and 12.5" overall width. **INTERNATIONAL CUSTOMERS NOTE** We are unfortunately unable to offer QuickJack internationally at this time. All international orders will be cancelled.
Show More Show Less
QuickJack - Corporate Logo
T#:1965125
Part#: 5620291
Ships in 4 Business Days
$ 410.00 USD
Free Shipping
$ 410.00 USD
Free Shipping
Increases the lift point spread of the 5000TL, 7000TL, BL-5000SLX and BL-7000SLX by 6 inches

QuickJack - Corporate Logo
T#:3643614
Part#: 6000ELX
Ships in 4 Business Days
Starting at $ 2,694.00 USD
Free Shipping
Starting at $ 2,694.00 USD
Free Shipping
The frames of the 6000ELX are super-long, surpassing even the extended-length TLX series. This elongated frame design is particularly suited for vehicles with extremely long wheelbases, making it compatible with virtually all contemporary electric vehicles (EVs) as well as other models boasting extended wheelbases, including high-end luxury vehicles with lift points extending to the far edges of the vehicle frame.
Show More Show Less

QuickJack - Corporate Logo
T#:840364
Part#: 5300013
Ships in 4 Business Days
$ 100.00 USD
Free Shipping
$ 100.00 USD
Free Shipping

Urethane Pinch-Weld Block - Set provides a superior solution for supporting vehicles on pinch-weld rails. Traditional rubber blocks can cause damage to delicate body rails due to excessive pressure points. These urethane pinch-weld blocks are engineered with a cross-cut slotted design, allowing versatile positioning either lengthwise or crosswise. They are ideal for safely supporting rocker panels or sheet metal body rails, particularly those that have degraded from corrosion over time.

  • Specially formulated urethane rubber for durability
  • Deep bilateral slots accommodate virtually all pinch weld frames
  • Versatile positioning: lengthwise or crosswise
  • Water, chemical resistant, and 100% weatherproof
  • Single-piece construction ensures a superior hold
  • Dimensions: 3.9” (L) x 2.9” (W) x 2.4” (H)
Show More Show Less
Active Autowerke - Corporate Logo
T#:397308
Part#: 15-011
Ships in 3 Business Days
$ 32.99 USD
Free Shipping
$ 32.99 USD
Free Shipping
Includes Recharge Oil (8 oz.) and Cleaner Spray (12 oz.). The recharge oil traps the smallest dirt particles, ensuring your engine is breathing clean air. The oil creates a positive magnetic charge with the filter's stainless steel mesh. This positive charge attracts negatively charged dust particles entering the filter, clearing them off the cotton and allowing for maximum airflow. The oil also contains a swelling additive for the cotton filtration media - this allows filtration media to collect small dirt particles that could harm your engine.
Show More Show Less
KMAC - Corporate Logo
T#:389646
Part#: 192416-3L
Special Order: No Guaranteed ETA
$ 545.00 USD
Free Shipping
$ 545.00 USD
Free Shipping
Location: Front
Type: Street/Track, Stage 2
Bearings: main PTFE-lined pillow-ball bearing suspended in polyurethane; self-lubricating radial axial bearing/bushing in upper spring plate
Springs: includes OEM size upper spring perch, 60mm upper spring perch, and 2.5" upper spring perch

The Stage 3 KMAC plates are a mixed track and street camber/caster plate meant to be used in a variety of suspensions and setups. Since there is less bushing than on the Stage 1, more noise and vibration will reach the driver. The adjustment design is similar to the Stage 1 with a floating mount that sets camber and caster simultaneously. This design allows maximum range of adjustment since no other hardware interferes with the adjustments. These plates can work on both coil over and stock-stype suspensions and upper spring perches are included for OEM springs, 60mm, and 2.5" coil over springs. The upper perch assembly incorporate a self-sliding radial bushing that allows the spring to spin during its travel instead of bind. This reduces tension on the spring and helps reduce noise and spring 'popping' noises. Bearing inserts, spacers for correct articulating angles, and 3 sizes of upper nut adapters included. The urethane bushings and bearings are replaceable if they wear out. These are designed mainly for adding negative camber for improved handling and not for camber correction back to stock settings (see Stage 1 kit). Basic instructions included but professional installation is required.

Note: suspensions vary from manufacturer to manufacturer. The proper stacked height and clearances are required. K-Mac includes bearing adapters, spacers, and various top nuts but it is still the responsibility of the installer to ensure a correct and safe fitment. As with any race-derived component, additonal fabrication may be required.

This item fits the following BMWs:
2008-2012  E82 BMW  128i 135i
6/1992-1999  E36 BMW  318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005  E46 BMW  323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
2006-2011  E90 BMW  325i 328i 330i 335d 335i - Sedan
2006-2012  E91 BMW  328i - Wagon
2007-2013  E92 BMW  328i 335i 335is - Coupe
2007-2013  E93 BMW  328i 335i - Convertible
1997-2003  E39 BMW  525i 528i 530i 540i (not for cars with EDC)
2004-2010  E60 BMW  525i 530i 528i 535i 545i 550i
2004-2011  E63 E64 BMW  645ci 650i
1997-2002  Z3 BMW  Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008  E85 BMW  Z4 2.5i Z4 3.0i Z4 3.0si
2009+  Z4 BMW  Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
2000-2003  E52 BMW  Z8 Roadster (without EDC)
Show More Show Less


KMAC - Corporate Logo
T#:389647
Part#: 192416-2L
Ships in 8 Business Days
$ 545.00 USD
Free Shipping
$ 545.00 USD
Free Shipping
Location: Front
Type: Street/Track, Stage 2
Bearings: main PTFE-lined pillow-ball bearing suspended in polyurethane; self-lubricating radial axial bearing/bushing in upper spring plate
Springs: includes OEM size upper spring perch, 60mm upper spring perch, and 2.5" upper spring perch

The Stage 2 KMAC plates are a mixed track and street camber/caster plate meant to be used in a variety of suspensions and setups. Since there is less bushing than on the Stage 1, more noise and vibration will reach the driver. The adjustment design is similar to the Stage 1 with a floating mount that sets camber and caster simultaneously. This design allows maximum range of adjustment since no other hardware interferes with the adjustments. These plates can work on both coil over and stock-stype suspensions and upper spring perches are included for OEM springs, 60mm, and 2.5" coil over springs. The upper perch assembly incorporate a self-sliding radial bushing that allows the spring to spin during its travel instead of bind. This reduces tension on the spring and helps reduce noise and spring 'popping' noises. Bearing inserts, spacers for correct articulating angles, and 3 sizes of upper nut adapters included. The urethane bushings and bearings are replaceable if they wear out. These are designed mainly for adding negative camber for improved handling and not for camber correction back to stock settings (see Stage 1 kit). Basic instructions included but professional installation is required.

Note: suspensions vary from manufacturer to manufacturer. The proper stacked height and clearances are required. K-Mac includes bearing adapters, spacers, and various top nuts but it is still the responsibility of the installer to ensure a correct and safe fitment. As with any race-derived component, additonal fabrication may be required.

This item fits the following BMWs:
2008-2012  E82 BMW  128i 135i
6/1992-1999  E36 BMW  318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005  E46 BMW  323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
2006-2011  E90 BMW  325i 328i 330i 335d 335i - Sedan
2006-2012  E91 BMW  328i - Wagon
2007-2013  E92 BMW  328i 335i 335is - Coupe
2007-2013  E93 BMW  328i 335i - Convertible
1997-2003  E39 BMW  525i 528i 530i 540i (not for cars with EDC)
2004-2010  E60 BMW  525i 530i 528i 535i 545i 550i
2004-2011  E63 E64 BMW  645ci 650i
1997-2002  Z3 BMW  Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008  E85 BMW  Z4 2.5i Z4 3.0i Z4 3.0si
2009+  Z4 BMW  Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
2000-2003  E52 BMW  Z8 Roadster (without EDC)
Show More Show Less
BMC - Corporate Logo
T#:397417
Part#: FB518/08
Back Ordered
$ 83.99 USD
Free Shipping
$ 83.99 USD
Free Shipping
Looking to upgrade your air filter for increased flow and performance? BMC filter allow significantly higher air flow and are perfectly molded in one piece to fit exactly the same as your stock air filter. These filters are constructed from multi-layerd cotton gauze that is pre-oiled and can be cleaned and regenerated using the BMC regeneration kit.
Show More Show Less
SACHS Performance - Corporate Logo
T#:393886
Part#: 881864999533KT
In Stock
$ 1,043.99

This product was last offered at the strikethrough price on
03-25-2026

$ 1,025.99 USD
Free Shipping
$ 1,025.99 USD
Free Shipping

Ensure your clutch system can get the all of the power to the wheels. Stock clutch components lack the ability to transmit the full torque and horsepower loads to the wheels without suffering from increased wear and eventual clutch fade. Sachs Performance Clutch Kits are designed for sport and race applications, delivering higher torque transmission without succumbing to wear and tear and fading over extended periods of abuse.

Sachs Performance Clutch Kits include the following upgraded components:

  • Performance Pressure Plate - Increased clamping force and resistant to wear

  • Performance Clutch Disc - Allows for higher clamping force, higher torque transmission, and better clutch engagement at higher RPM’s

These kits are available with two different clutch discs, Organic and Metallic. Organic clutch discs are perfect for both performance street and light-moderate track applications. Metallic are designed for specifically for full-time track use such as endurance racing, clubsport, autocross, hill climbing and 1/4 mile racing. Please be sure you are purchasing the kit that best fits your needs. Our sales staff can help with any questions or concerns you may have!

Sachs Performance is the racing and performance oriented selection of high quality parts from Sachs and ZF Engineering. Supplying countless brands with OE parts and offering one of the widest selection of OEM replacement parts, they are known for their exceptionally high quality products. You can purchase these performance parts with confidence, knowing they will resist heavy wear and tear for much longer than most other aftermarket options.

Show More Show Less

APR Black Valve Stem Caps - Pack of 4
Call In Or Chat For Best Price!
Call In, Chat, Or Email, For Best Price! Limited Time Only!
APR - Corporate Logo
T#:22987107
Part#: MS100197
In Stock
11% off MSRP $ 17.94

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 15.95 USD
Free Shipping on orders $49 and up
11% off MSRP
$ 17.94

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 15.95 USD
Free Shipping on orders $49 and up

APR Black Valve Stem Caps are a stylish and functional upgrade for your vehicle's wheels. Sold as a set of four, these high-quality aluminum caps feature an engraved APR logo on each cap. Designed to add a touch of customization to your vehicle, they also serve a practical purpose.

  • Premium Quality: Made from durable aluminum for long-lasting performance.
  • Enhanced Aesthetics: Features an engraved APR logo for a sleek and stylish look.
  • Functional Design: Helps protect valve stems from dirt and moisture.
  • Easy Installation: Simple to install and compatible with most standard valve stems.

Upgrade your vehicle with APR Black Valve Stem Caps to enhance both style and functionality.

Show More Show Less

APR Valve Stem Caps - Set Of 4 - Silver
Call In Or Chat For Best Price!
APR - Corporate Logo
T#:31125602
Part#: MS100178
In Stock
11% off MSRP $ 17.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 15.99 USD
Free Shipping
11% off MSRP
$ 17.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 15.99 USD
Free Shipping

APR Valve Stem Caps - Set Of 4 - Silver are a stylish and functional upgrade for any vehicle. This set includes four high-quality aluminum valve stem caps, each engraved with the distinctive APR logo. These caps are designed to enhance the appearance of your wheels while providing durability and reliability.

  • Stylish Appearance: Each cap features a sleek silver finish and an engraved APR logo, adding a touch of elegance to your vehicle.
  • Durable Construction: Made from high-quality aluminum, these valve stem caps are built to withstand harsh conditions and resist corrosion.
  • Easy Installation: Simple to install and compatible with most standard valve stems.
  • Enhanced Wheel Aesthetics: Upgrades the look of your wheels with a subtle yet impactful design.
  • Functional Protection: Helps protect valve stems from dirt and moisture, ensuring consistent performance.

This set of valve stem caps is an excellent choice for anyone looking to add a refined touch to their vehicle's wheels.

Show More Show Less
APR Valve Stem Caps - Set Of 4 - Gunmetal
Call In Or Chat For Best Price!
APR - Corporate Logo
T#:31092523
Part#: MS100179
In Stock
11% off MSRP $ 17.94

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 15.95 USD
Free Shipping
11% off MSRP
$ 17.94

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 15.95 USD
Free Shipping

APR Valve Stem Caps - Set Of 4 - Gunmetal offer a stylish and functional upgrade for any vehicle. These high-quality aluminum valve stem caps come in a sleek gunmetal finish and feature an engraved APR logo, which adds a touch of sophistication to your wheels.

  • Material: Made from durable aluminum for long-lasting performance
  • Design: Engraved APR logo adds a distinctive look
  • Finish: Gunmetal color enhances the visual appeal of your wheels
  • Set Includes: 4 valve stem caps for a complete upgrade
  • Compatibility: Fits most standard valve stems

These APR Valve Stem Caps are designed to provide both aesthetics and durability, making them a great choice for enhancing your vehicle's style.

Show More Show Less

QuickJack - Corporate Logo
T#:40748600
Part#: 5175634
Ships in 4 Business Days
$ 2,175.00 USD
$ 2,175.00 USD
This QuickJack package deal includes the 6000TL car lift, a set of QuickJack wall hangers (T#913727), and a set of four pinch weld blocks (T#840364). The 6000TL has a maximum lifting capacity of 6,000-lb. It is the highly anticipated sequel to QuickJack's 5000TL. With the ability to lift an extra 3-inches, the 6000TL portable car lift provides more room to tackle every repair and maintenance task on vehicles weighing up to 6,000-lbs. It also takes seconds to get up and running following initial one-time assembly. Just drop it on the ground and hook up the power. As soon as the jack frames and rubber blocks are in place under your vehicle, it'll be at a work-ready height in no time at all. Working in a garage can become troublesome when stuck with only a jack and a few jack stands. Not only are jack-stands very unsteady at raised heights, but they also require the long, tedious process of raising each corner individually. Eliminate this issue with a vehicle lift that is unlike any other lifting system you have seen! QuickJack can raise your vehicle with the push of a button, raising your vehicle to the lift's maximum height in just seconds. This allows you complete access to service your vehicle's suspension, drivetrain, and underbody, without any crossbeams to get in your way. Also, keeping safety paramount, QuickJack uses rugged, welded steel construction for strength and rock-solid stability, and features auto-locking bars that lock the lift and vehicle at a set height until you are finished. This ensures the lift will never fail with you underneath, standing up to the toughest real-world garage and track conditions. **INTERNATIONAL CUSTOMERS NOTE** We are unfortunately unable to offer QuickJack internationally at this time. All international orders will be cancelled.
Show More Show Less
QuickJack - Corporate Logo
T#:40748605
Part#: 6000TL
Ships in 4 Business Days
Starting at $ 2,075.00 USD
Starting at $ 2,075.00 USD
The 6000TL has a maximum lifting capacity of 6,000-lb. It is the highly anticipated sequel to QuickJack's 5000TL. With the ability to lift an extra 3-inches, the 6000TL portable car lift provides more room to tackle every repair and maintenance task on vehicles weighing up to 6,000-lbs. It also takes seconds to get up and running following initial one-time assembly. Just drop it on the ground and hook up the power. As soon as the jack frames and rubber blocks are in place under your vehicle, it'll be at a work-ready height in no time at all.
Show More Show Less

QuickJack - Corporate Logo
T#:40748601
Part#: 5175638
Ships in 4 Business Days
$ 2,225.00 USD
$ 2,225.00 USD
This QuickJack package deal includes the 6000TLX extended car lift, a set of QuickJack wall hangers (T#913727), and a set of four pinch weld blocks (T#840364). The 6000TLX has a maximum lifting capacity of 6,000-lb. It is the highly anticipated sequel to QuickJack's popular 5000TLX car lift. With its extended lift point reach of 6 inches more than the 6000TL for longer wheelbases and the ability to lift an extra 3 inches, the 6000TLX portable car lift provides more room to tackle every repair and maintenance task on vehicles weighing up to 6,000-lbs. It also takes seconds to get up and running following initial one-time assembly. Just drop it on the ground and hook-up the power. As soon as the jack frames and rubber blocks are in place under your vehicle, it'll be at a work-ready height in no time at all. Working in a garage can become troublesome when stuck with only a jack and a few jack stands. Not only are jack-stands very unsteady at raised heights, but they also require the long, tedious process of raising each corner individually. Eliminate this issue with a vehicle lift that is unlike any other lifting system you have seen! QuickJack can raise your vehicle with the push of a button, raising your vehicle to the lift's maximum height in just seconds. This allows you complete access to service your vehicle's suspension, drivetrain, and underbody, without any crossbeams to get in your way. Also, keeping safety paramount, QuickJack uses rugged, welded steel construction for strength and rock-solid stability, and features auto-locking bars that lock the lift and vehicle at a set height until you are finished. This ensures the lift will never fail with you underneath, standing up to the toughest real-world garage and track conditions. **INTERNATIONAL CUSTOMERS NOTE** We are unfortunately unable to offer QuickJack internationally at this time. All international orders will be cancelled.
Show More Show Less

QuickJack - Corporate Logo
T#:40748608
Part#: 8000TLX
Ships in 4 Business Days
Starting at $ 2,504.00 USD
Starting at $ 2,504.00 USD
The 8000TLX extended vehicle lift has a maximum lifting capacity of 8,000-lb. It is the highly anticipated sequel to QuickJack's beloved 7000TLX. With the ability to lift an extra 3-inches, the 8000TLX portable car lift provides more room to tackle every repair and maintenance task on vehicles weighing up to 8,000 lbs. The longer frames and 66" lift point make this kit perfect for larger SUVs and trucks. It also takes seconds to get up and running following initial one-time assembly. Just drop it on the ground and hook up the power. As soon as the jack frames and rubber blocks are in place under your vehicle, it'll be at a work-ready height in no time at all.
Show More Show Less
Active Autowerke - Corporate Logo
T#:57616348
Part#: RTF-1L
Ships in 3 Business Days
New Item
$ 240.00 USD
Free Shipping
$ 240.00 USD
Free Shipping
Rotrex superchargers utilize a unique traction drive system that sets it apart from other centrifugal-style superchargers. For best performance, Rotrex recommends replacing this fluid every 50,000 miles. This bottle of traction fluid is plenty enough for one supercharger service (typically 750ml).
Show More Show Less
QuickJack - Corporate Logo
T#:403158
Part#: 5585448
Ships in 4 Business Days
$ 975.00 USD
Free Shipping
$ 975.00 USD
Free Shipping
This power unit kit includes everything you need to operate your QuickJack frames.


QuickJack - Corporate Logo
T#:40748607
Part#: 8000TL
Ships in 4 Business Days
Starting at $ 2,225.00 USD
Starting at $ 2,225.00 USD
The 8000TL has a maximum lifting capacity of 8,000-lb. It is the highly-anticipated sequel to QuickJack's beloved 7000TL. With the ability to lift an extra 3-inches, the 8000TL portable car lift provides more room to tackle every repair and maintenance task on vehicles weighing up to 8,000-lbs. It also takes seconds to get up and running following initial one-time assembly. Just drop it on the ground and hook up the power. As soon as the jack frames and rubber blocks are in place under your vehicle, it'll be at a work-ready height in no time at all.
Show More Show Less
SACHS Performance - Corporate Logo
T#:393885
Part#: 881864999532KT
Back Ordered
$ 1,043.99

This product was last offered at the strikethrough price on
03-25-2026

$ 1,025.99 USD
Free Shipping
$ 1,025.99 USD
Free Shipping

Ensure your clutch system can get the all of the power to the wheels. Stock clutch components lack the ability to transmit the full torque and horsepower loads to the wheels without suffering from increased wear and eventual clutch fade. Sachs Performance Clutch Kits are designed for sport and race applications, delivering higher torque transmission without succumbing to wear and tear and fading over extended periods of abuse.

Sachs Performance Clutch Kits include the following upgraded components:

  • Performance Pressure Plate - Increased clamping force and resistant to wear

  • Performance Clutch Disc - Allows for higher clamping force, higher torque transmission, and better clutch engagement at higher RPM’s

These kits are available with two different clutch discs, Organic and Metallic. Organic clutch discs are perfect for both performance street and light-moderate track applications. Metallic are designed for specifically for full-time track use such as endurance racing, clubsport, autocross, hill climbing and 1/4 mile racing. Please be sure you are purchasing the kit that best fits your needs. Our sales staff can help with any questions or concerns you may have!

Sachs Performance is the racing and performance oriented selection of high quality parts from Sachs and ZF Engineering. Supplying countless brands with OE parts and offering one of the widest selection of OEM replacement parts, they are known for their exceptionally high quality products. You can purchase these performance parts with confidence, knowing they will resist heavy wear and tear for much longer than most other aftermarket options.

Show More Show Less