Packaged by Turner for BMW 1 Series E82 (2008-2013)

Clear BMW chassis

Please ensure your correct model is selected

Sub-Categories

Sort By:

Oil Cooler Housing Gasket Kit
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:637847
Part#: 11428637820KT1
In Stock
$ 179.99

This product was last offered at the strikethrough price on
09-01-2026

$ 176.99 USD
Free Shipping
$ 176.99 USD
Free Shipping
Packaged by Turner - Corporate Logo
T#:1241397
Part#: TMSE90N55BPKT
Ships on Nov 3, 2026
Sale - Save 8% $ 603.99

This product was last offered at the strikethrough price on
09-01-2026

$ 557.99 USD
Free Shipping
Sale - Save 8%
$ 603.99

This product was last offered at the strikethrough price on
09-01-2026

$ 557.99 USD
Free Shipping
BMW has a seemingly endless number of fans of the N54/N55/S55 engines, three straight-six turbo engines that are each capable of 750+ horsepower, but that doesn't mean they were without their faults! BMW's N54 had a notoriously rocky start with reliability due to multiple issues such as fuel injectors failing, turbos failing, serpentine belt failure, crank hubs coming loose, and more... BMW made multiple attempts to fix the issues plaguing the N54, but they could only do so much and the fixes rolled out seemed temporary at best. Following the N54, BMW released their updated N55 and S55 engines, giving many people hope that these engines would address the previous issues. Unfortunately, this was only some-what the case. Crank hubs and crank bolts continued to loosen over time and serpentine belts continued to shred themselves and get pulled into the oil pan through the front main seal. For all three engines, this meant a single failure could effectively turn your engine into an oversized paperweight. Luckily for us, the BMW community is full of skilled enthusiasts who have gladly taken up the task to offer solutions! The first headache to be addressed was the Crank Hub and Bolt. Using a simple plate that fits perfectly over your crank hub's hex-head bolt and mounts up against the damper, the crank bolt is effectively locked in place, preventing it from being able to back out until the plate is fully removed. Next up was the serpentine belt failures. It's not known what exactly causes the serpentine belt to split, but once it does, the pieces hanging off of the belt wrap around and behind the damper. This leads to the belt breaking up into smaller pieces and eventually getting pushed between the crank hub and rear main seal into the oil pan. These small pieces of debris get caught in and block the oil pickup, preventing oil flow and leading to engine failure. To prevent this, multiple aftermarket companies came up with their own versions of Crank Seal Plates. This plate is installed behind the front damper, blocking the opening that allows the serpentine belt to pass between the crank hub and seal, keeping debris out of your oil pan! Also included in this kit are the components to service your front Oil Cooler/Filter Housing gaskets, refresh your drive belt system, and install the aftermarket upgrades. Kit Features and Contents: Vargas Turbo Crank Bolt Capture Vargas Turbo Crank Seal Plate OEM Accessory Belt OEM Belt Tensioner & Idler Pullies Liqui-Moly Longtime High Tech Engine Oil (5w-30) - 7 Liters OEM Hengst Oil Filter OEM Oil Filter/Cooler Housing Gaskets TMS Oil Change Sticker Genuine BMW Full-Strength Coolant - 1 Liter
Show More Show Less
Packaged by Turner - Corporate Logo
T#:555773
Part#: PBTSRKT62
In Stock
$ 149.99 USD
Free Shipping
$ 149.99 USD
Free Shipping

Tired of dealing with excess shifter slop and a mushy shifter? The Turner Shifter Rebuild & Upgrade Kits will restore your shifter's crisp feel and eliminate excessive movement that develops over time with wear. Included in this kit are all the common wear components and OE quality bushings that will give you a tighter shifting feel and will hold up like a day 1 BMW.

This kit is perfect to restore your driving pleasure!

See the included components under Kit Contents below.

Show More Show Less

Packaged by Turner - Corporate Logo
T#:555760
Part#: PBTSRKT49
In Stock
$ 151.99 USD
Free Shipping
$ 151.99 USD
Free Shipping

Tired of dealing with excess shifter slop and a mushy shifter? The Turner Shifter Rebuild & Upgrade Kits will restore your shifter's crisp feel and eliminate excessive movement that develops over time with wear. Included in this kit are all the common wear components and OE quality bushings that will give you a tighter shifting feel and will hold up like a day 1 BMW.

This kit is perfect to restore your driving pleasure!

See the included components under Kit Contents below.

Show More Show Less

Cam Bearing Ledge Replacement Kit - N54
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:640352
Part#: 11127531224KT2
Ships on Sep 8, 2026
$ 1,650.31 USD
Free Shipping
$ 1,650.31 USD
Free Shipping
Over time the bearing ledges in your N54 can be damaged by contaminated oil or a malfunctioning VANOS which can cause grooves to form in the bearing ledges. This kit contains everything necessary to replace these as well as important hardware.
Show More Show Less
Performance Front Brake Service Kit - E82/88 135i
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:24112770
Part#: E8X135FPBKKT
In Stock
Sale - Save 18% $ 960.99

This product was last offered at the strikethrough price on
05-03-2026

$ 784.75 USD
Sale - Save 18%
$ 960.99

This product was last offered at the strikethrough price on
05-03-2026

$ 784.75 USD
Everything you need to upgrade your front brakes in an afternoon in one simple kit. By providing it all for you in a single click, this kit has made it easier to get the high-quality upgrade components you need when beginning a brake service. This performance brake service kit includes rotors, pads, sensors, assembly grease, and set screws to make your brake upgrade easy. Includes the following parts: Front ECS 2-piece drilled and slotted rotors Front Hawk HPS pads URO pad wear sensor ECS stainless steel rotor set screws Brake lubricant compound packet Includes ECS Stainless Rotor Set Screws to eliminate rusty factory fasteners
Show More Show Less

Wheel Stud Conversion Kit - full set
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:15744052
Part#: 001467ECSR3-KT
In Stock at Vendor
$ 193.99 USD
Free Shipping on orders $49 and up
Make changing out your wheels faster and easier with a stud conversion. This kit includes: Red Mishimoto Aluminum Locking Lug Nuts 63mm Wheel Studs (20) This gives you permanent wheel hangers and saving you time and less hassle! Simply screw in the supplied studs and you are in business. Why use wheel studs instead of wheel bolts? Some racing entities require wheel studs for the added confidence of wheel-to-hub contact. In order to run spacers with wheel bolts, custom lengths are required for different spacer widths. Wheel studs are designed to accommodate various spacer widths all in one application. Installing wheels also becomes easier. The wheel studs will act as a wheel hanger, while the nuts secure the wheel in place. Wheel studs stay in the hub, which means you are no longer constantly removing and installing your wheel bolts. The benefit? Less wear on your wheel hubs, meaning less premature wear. Since your wheel studs remain in the hub, it also means changing/removing tires becomes incredibly quick and easy. *Note: Thread-locking compound is recommended during installation. Studs should be torqued to 15Nm. These studs may be used with spacers up to 20mm.
Show More Show Less
OEM Ignition Service Kit - N54 3.0L
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:556739
Part#: N54TISKT
In Stock
$ 291.99 USD
Free Shipping
$ 291.99 USD
Free Shipping

Often an oversight in maintenance, ignition components are also susceptible to wear and tear. Spark Plugs can accumulate carbon, reducing the spark intensity and it's ability to properly ignite the air/fuel mixture, leading to misfires and generally declining performance. Other ignition components, such as coils, boots, wires, caps, and rotors, can also wear out over time due to factors like heat and contamination, preventing the current from reaching the spark plug.

To start over fresh with all new components, we now offer these Ignition Service Kits. Each kit comes with brand new OE quality components, replacing any potential fault points in your ignition system for peak performance!

See kit contents below for a complete list of included components.

Show More Show Less

Elring Oil Pan Gasket And CRP Hardware Set
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:56218592
Part#: 1137548031ELRKT2
In Stock
New Item
$ 82.99 USD
Free Shipping on orders $49 and up
This Oil Pan Refresh Kit pairs a high tier Elring sealing gasket with the complete factory spec aluminum bolt set required for proper reassembly.

Genuine BMW Oil Pan Gasket With Oil Pan Bolt Set - N55
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:56038085
Part#: 11137600482KT4
In Stock
New Item
$ 130.99 USD
Free Shipping on orders $49 and up
This Hardware & Gasket Refresh Kit takes the guesswork out of maintenance. This kit bundles a high quality replacement oil pan gasket with a fresh, complete set of factory spec aluminum hardware. Whether you are dropping the subframe for a preventative overhaul or chasing down an active oil leak
Show More Show Less
E82 135i N54 Build Your Own Maintenance Service Package
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:338793
Part#: TMS14352
In Stock
Sale - Save 15% $ 105.99

This product was last offered at the strikethrough price on
08-31-2026

Starting at $ 89.69 USD
Free Shipping
Sale - Save 15%
$ 105.99

This product was last offered at the strikethrough price on
08-31-2026

Starting at $ 89.69 USD
Free Shipping

Don't buy into the hype that your car is maintenance-free! It was only free during the BMW warranty period, which simply deferred maintenance. Take charge of the care and servicing of your investment and it will reward you in driving pleasure and in your bank account. Using a preventative service schedule will not only keep your BMW running like new, but will also prevent a more costly repair and inconvenience in the future. Not to mention, complete and thorough maintenance records can add hundreds or thousands to a selling price of a used car and give a buyer unmatched piece-of-mind.

Our approach to servicing and caring for newer BMW models is not radically different than when we opened nearly twenty years ago. The design and materials of some components have changed but that only affects WHEN you should replace something, not IF. Through our own Service Department, and thousands of sales annually, we have put together packages for your newer BMW model that will reinject some life into your car and keep it performing at its peak. We use Original Equipment (OE) or Original Equipment Manufacturer (OEM) parts that we have trusted since we opened in 1993. In some cases, we recommend a performance alternative part that we have found works better, or resolves a design flaw, with the original. So you get top quality parts, first-rate service, and unbeatable expertise.

The LL-01 BMW oil specification marks stringent requirements from BMW that oil must meet in order to receive this approval rating. Still used today in many BMW NA and Turbo engines, LL-01 TwinPower Turbo 5w-30 and all LL-01 approved oils are great for ensuring proper wear protection and low fuel consumption, even during high oil change intervals. When BMW LL-04 oil was developed, it was not approved at the time for use in the US. This was due to the high sulfur and ethanol content in US fuels. Originally used mostly for diesel engines and euro motors, LL-04 demand is now starting to pick up with changes in US fuels such as lower sulfur content since 2014 and thanks to LL-04 and LL-01 being interchangeable/compatible. The slight advantage of LL-04 over LL-01 is due to LL-04's higher ZDDP levels and HTHS ratings. This allows for increased engine protection at higher temperatures and engine pressures. In addition, LL-04 also has a lower SAPS level which benefits direct-injection engines, including all BMW turbo engines since 2007.

5,000 Mile Oil Service

(click to expand)

  • engine oil change with filter, using OE BMW 5W30 or Motul
  • replace drain bolt crush washer
  • reset oil service/maintenance indicator
  • inspect and top off any other fluids

Annual Service

(click to expand)

  • air filter cleaning or replacement
  • MAF/airflow sensor cleaning
  • A/C microfilter/cabin filter replacement
  • brake fluid flush/bleeding
  • top off power steering fluid (make sure you use the correct Pentosin fluid!)
  • wiper blade replacement
  • lubricate door hinges and treat rubber door seals
  • inspect spare tire or tire repair kit, and tire-changing tools
  • inspect drive belt for cracking or stretching
  • inspect intake boots and vacuum lines for cracks
  • inspect brake system for pad wear, rotor wear, parking brake operation, and brake pedal pressure
  • inspect bushing and ball joints for excess play/movement
  • ensure the cooling systems are functioning correctly (hoses and thermostat, thermostat housing, auxiliary fan, A/C system, etc)

40,000 Mile Major Service

(click to expand)

  • spark plug replacement
  • ignition coil and coil boot inspection and replacement
  • inspect spark plug cavity in valve cover for leaking valve cover gasket
  • engine oil change with filter, using OE BMW 5W30 or Motul
  • reset oil service/maintenance indicator
  • air filter replacement or cleaning for aFe/K&N type
  • fill and bleed cooling system
  • manual transmission fluid change, using Red Line ATFD6 or Genuine BMW MTF-LT-3
  • differential fluid change, using Red Line 75/90 or Motul Gear300
  • brake fluid flush/bleeding
  • serpentine belt replacement
  • inspect belt roller pulleys (drag and rotation) and belt tensioners
  • complete chassis inspection, including: front control arms, tie rods, ball joints, wheel bearings, rear suspension arm bushings, rear upper shock mounts, rear subframe mounts, axle shaft boots
  • complete brake system test and inspection
  • engine and transmission leak detection and diagnosis
  • shifter linkage, driveshaft guibo, CV, and center support bearing inspection
  • exhast system inspection, including hanger replacement

80,000 Mile Major Service

(click to expand)

  • spark plug replacement
  • ignition coil and coil boot inspection and replacement
  • inspect spark plug cavity in valve cover for leaking valve cover gasket
  • engine oil change with filter, using OE BMW 5W30 or Motul
  • reset oil service/maintenance indicator
  • air filter replacement or cleaning for aFe/K&N type
  • fill and bleed cooling system
  • manual transmission fluid change, using Red Line ATFD6 or Genuine BMW MTF-LT-3
  • differential fluid change, using Red Line 75/90 or Motul Gear300
  • brake fluid flush/bleeding
  • fuel filter, pressure regulator replacement
  • serpentine belt replacement
  • replace belt roller pulleys and belt tensioners
  • complete chassis inspection, including: front control arms, tie rods, ball joints, wheel bearings, rear suspension arm bushings, rear upper shock mounts, rear subframe mounts, axle shaft boots
  • complete brake system test and inspection
  • engine and transmission leak detection and diagnosis
  • shifter linkage, driveshaft guibo, CV, and center support bearing inspection
  • exhast system inspection, including hanger replacement
  • water pump and thermostat inspection or replacement. The water pump on this car is electric and will not display warning signs of impending failure. The output of the water pump can be tested however, and your local full-service BMW repair shop should have the diagnostic tools to perform this test.


You may also want to pick up these other helpful items:

  • E90 Bentley Service Manual (not specific to the 1-series but still very helpful)
  • We offer many DIY-related tools, specifically for the 135i owner -
    drain plug sockets, fluid suction and bleeder pumps, spark plug sockets and install guides, oil filter cap adapter, oil funnels, and more!
  • SprintBooster throttle enhancement
  • This package fits the following BMWs:
    2008-2012 E82 BMW 135i
    2008-2012 E88 BMW 135i Convertible



    Put a check in the boxes next to the items you wish to order.
Show More Show Less
Packaged by Turner - Corporate Logo
T#:338357
Part#: 31222282670
Ships in 7 Business Days
Sale - Save 31% $ 297.99

This product was last offered at the strikethrough price on
05-29-2026

Starting at $ 204.39 USD
Free Shipping
Sale - Save 31%
$ 297.99

This product was last offered at the strikethrough price on
05-29-2026

Starting at $ 204.39 USD
Free Shipping
This is the direct replacement wheel bearing and hub assembly to fit the front of the E60 M5, E63 M6, E82 1M, and E90/E92 M3. We sell the OE BMW or OEM F.A.G. bearing so you get the highest quality part available. This is the hub with the bearing and it bolts to the carrier (new hardware is recommended, see below).

Replace your wheel bearings when you hear groaning or rumbling sounds from the front. These sounds increase in frequency as speed increases and will get louder as you turn the wheel (and put load on the worn side). Failing wheel bearings can also attribute to annoying 'pad knockback' on the track.

Sold per bearing/hub.

This item fits the following BMWs:
2008-2012 E82 BMW 1M Coupe
2006-2011 E90 BMW M3 - Sedan
2007-2013 E92 BMW M3 - Coupe
2007-2013 E93 BMW M3 - Convertible
2004-2010 E60 BMW M5
2004-2011 E63 BMW M6
Show More Show Less


High Pressure Fuel Pump Replacement Kit
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:5389771
Part#: N55HPFKKT
In Stock
$ 1,783.99

This product was last offered at the strikethrough price on
07-06-2026

$ 1,743.99 USD
Free Shipping
$ 1,743.99 USD
Free Shipping
HPFP woes? Replacement high pressure exchange pump for the N55 engine. Kit includes: Remanufactured High-pressure fuel pump Intake manifold gasket sets Throttle body gasket High pressure fuel sensor No core charge required!
Show More Show Less
SPEC Clutch Kit With Billet Single Mass Flywheel - Stage 2+
For Vehicles with Production Date Up to 01/09 with 8 Bolt Crank
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:41931264
Part#: SB53A2STG2PKT
Ships in 3 Business Days
$ 1,595.99 USD
Free Shipping on orders $49 and up
$ 1,595.99 USD
Free Shipping on orders $49 and up
A go-to solution for BMW enthusiasts who need next-level performance for spirited driving, autocross, or track days—without giving up street manners.
High Pressure Fuel Pump Replacement Kit - N55 E Chassis
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:15644274
Part#: 13517616170KT
In Stock
$ 1,783.31

This product was last offered at the strikethrough price on
07-06-2026

$ 1,743.13 USD
Free Shipping on orders $49 and up
$ 1,743.13 USD
Free Shipping on orders $49 and up
This extensive kit includes a HPFP and associated gaskets to get the job done right!

Build your own Front & Rear Brake Package - E9X M3, E82 1M
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:340267
Part#: TMS6066
Ships in 2 Business Days
Sale - Save 17% $ 1,929.99

This product was last offered at the strikethrough price on
07-14-2026

Starting at $ 1,597.22 USD
Free Shipping
Sale - Save 17%
$ 1,929.99

This product was last offered at the strikethrough price on
07-14-2026

Starting at $ 1,597.22 USD
Free Shipping
This brake package for the 2008+ BMW E9X M3 (incl Competition Package) and E82 1M comes with everything you need to perform a major brake overhaul:

Front and rear rotors with hardware - Original BMW brand drilled and floating
Front and rear brake pads
Front and rear pad wear sensors
Brake fluid - low viscosity for street use or high-performance/racing fluid for track use

A complete set of replacement brake components to get your 2008 E90-E92-E93 M3 or 1M Coupe back to factory spec or beyond. Our packages may use OE, OEM, and performance-designed parts that meet our standards for fitment, quality, performance, and durability. You don't have to pay high prices at the dealer to get the same quality and performance.

This package fits the following BMWs:
2011+ E82 BMW 1M
2008+ E90 BMW M3 - Sedan
2008+ E92 BMW M3 - Coupe
2008+ E93 BMW M3 - Convertible
Show More Show Less

Packaged by Turner - Corporate Logo
T#:338123
Part#: 34116772669
Ships in 1 Business Day
$ 225.99

This product was last offered at the strikethrough price on
05-07-2026

Starting at $ 193.98 USD
Starting at $ 193.98 USD
This is a pair (2) front brake rotors/discs (300x24mm) for the 2006 325i, 325xi coupe and sedan (E90 and E92), 2007+ 328i & 328xi coupe & sedan, and E82/E88 128i. Includes one front left and one front right brake rotor, so the price shown is to buy the pair of front rotors. Alternate part number 34116854998.

We offer a choice of brands to satisfy our customer's stringent quality standards -
Pagid Coated - an OEM type rotor made to the same dimensions and specs as the original design. These rotors have a high carbon content for excellent wear and thermal resistance. We like these rotors a lot because the quality is very high and the entire rotor is dip coated with anti-corrosion layer to prevent rust on the hub and in the cooling vanes, while the Zimmerman are only spray coated.
Zimmermann Coated - an OEM type rotor made to the same dimensions and specs as the original design. These rotors also have a high carbon content. These are high quality and spray coated with anti-corrosion layer to prevent rust on the hub and in the cooling vanes.

These front brake discs / brake rotors fit:
2006 E90 325i & 325xi sedan
2006 E91 325i & 325xi touring wagon
2007 E90 328i, 328xi sedan
2007 E91 328i, 328xi touring wagon
2007 E92 328i, 328xi coupe
2008+ E82 128i coupe
2008+ E88 125i, 128i convertible
Show More Show Less
Oil Pan Gasket - With Bolts
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:15644297
Part#: 11132210959-KT
In Stock
Sale - Save 3% $ 81.99

This product was last offered at the strikethrough price on
05-03-2026

$ 79.42 USD
Free Shipping on orders $49 and up
Sale - Save 3%
$ 81.99

This product was last offered at the strikethrough price on
05-03-2026

$ 79.42 USD
Free Shipping on orders $49 and up
A common piece to begin leaking on any engine, oil pan gaskets begin to leak after a few years.

Rear Differential Mounts - OEM Rubber - E82, E9X
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:386282
Part#: E9X-DIFF-MOUNTS
Ships in 1-2 days
$ 193.25 USD
Free Shipping
$ 193.25 USD
Free Shipping

This package of OEM E82 E90 E92 diff mounts replaces the stock rubber diff bushings. On a tuned 335i you may have noticed more driveline shudder or problems hooking up during hard launches. What happens is the stock rubber bushings are under constant flex as engine torque is transmitted through the differential. Under normal driving with a stock car the bushings are rarely stressed. But factor in significant additional torque from a tuned N54/N55 and the stock rubber will quickly show its weaknesses. You may have even broken a diff bolt or two as the heavy differential shifts around. Even non-turbo E82 and E9X models may benefit from fresh bushings.

This is a set of stock rubber bushings, made by OEM supplier Lemforder. They are the same as the Genuine BMW E9X diff mount bushings, but without the more expensive branding. If you're turned off by potential side effects of urethane or Delrin then the OEM diff mounts are your best option. The OEM mounts fit and perform just like the originals so there is no second guessing their quality. If you're looking for an upgrade we offer E9X solid Delrin and aluminum diff mounts that work well, even in street applications.

E9X Diff Mount Set includes:

  • 33176760287 x 2, front differential mount
  • 33176770866 x 1, rear differential mount
  • (new hardware is optional and can be ordered separately below)

    This item fits the following BMWs:
    2008-2012 E82 BMW 128i 135i
    2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive - Sedan
    2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
    2007-2013 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive - Coupe
    2007-2013 E93 BMW 328i 335i - Convertible
Show More Show Less
N54 Crank Hub Service Kit - Up To 02/2011
For vehicles with production date up to 02/2011
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:2227021
Part#: N54PRCRANKT
In Stock
Sale - Save 3% $ 156.99

This product was last offered at the strikethrough price on
05-03-2026

$ 151.69 USD
Free Shipping
Sale - Save 3%
$ 156.99

This product was last offered at the strikethrough price on
05-03-2026

$ 151.69 USD
Free Shipping
All of the components necessary for service when upgrading to an aftermarket crank hub solution.

Rod Bearing Replacement Kit - E9x, E82, E88
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:42133543
Part#: 11247589671TKT
Back Ordered
Sale - Save 2% $ 563.99

This product was last offered at the strikethrough price on
05-15-2026

$ 550.86 USD
Free Shipping on orders $49 and up
Sale - Save 2%
$ 563.99

This product was last offered at the strikethrough price on
05-15-2026

$ 550.86 USD
Free Shipping on orders $49 and up
Whether addressing rod bearing noise or performing preventative maintenance, this kit ensures optimal engine health, reducing the risk of costly repairs.

Packaged by Turner - Corporate Logo
T#:583043
Part#: T34116772669KT
Ships in 1-2 days
$ 589.99

This product was last offered at the strikethrough price on
09-02-2026

$ 530.99 USD
Free Shipping
$ 530.99 USD
Free Shipping

When replacing your worn out brakes, the market is flooded with performance options. If your BMW doesn't see track time, it's not very practical. Performance pads and rotors tend to result in a lack of bite at low braking temperatures and cause excessive noise in daily driven vehicles that becomes irritating. BMW brakes from the factory are perfectly suited for trips around town, across the country, and even the occasional spirited driving session, delivering smooth, quiet, and long lasting performance.

Included in this BMW brake package are all of the OEM equivalent components needed to replace your Front & Rear brakes with comfort, reliability, and optimal lifespan in mind.

Brake components in this kit:

Textar Front & Rear Brake Pads
Zimmerman Front & Rear Rotors
New Front & Rear Wear Sensors
Brand New Set Screws

Show More Show Less
Rear BMW Performance Big Brake Kit - 324x22mm
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:41289767
Part#: 34216786743TKT
Ships in 1-2 days
$ 1,278.99

This product was last offered at the strikethrough price on
03-24-2026

$ 1,215.99 USD
$ 1,215.99 USD
This Big Brake Kit features 324x22mm rear rotors with BMW Performance Dual piston calipers, brake pads, wear sensors and associated hardware!
Rod Bearing Replacement Kit - E9X E82/88 N54 3.0L
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:24145934
Part#: E9XN54RBRKT
In Stock
$ 521.23 USD
Free Shipping on orders $49 and up
This kit includes everything needed to replace your rod bearings. Kit includes Upper and lower road bearings Hardware Oil filter BMW TwinPower Turbo Oil Oil pan gasket RedLine assembly lube
Show More Show Less


Eccentric Shaft Replacement Kit - N55/S55
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:21735862
Part#: CAMGSKTN55S55KT
In Stock
$ 1,209.99

This product was last offered at the strikethrough price on
08-24-2026

$ 1,208.99 USD
Free Shipping on orders $49 and up
$ 1,208.99 USD
Free Shipping on orders $49 and up
When it comes to optimizing the performance and longevity of your BMW N55 or S55 engine, few upgrades can rival the impact of replacing the camshaft, bearings, and gaskets. These essential components play a pivotal role in your engine's overall health and performance, and upgrading them can deliver a host of benefits, from increased power to enhanced reliability. In this article, we'll explore the advantages of investing in these critical upgrades for your BMW N55 or S55 engine. Improved Performance: Upgrading your BMW N55 or S55 engine with a new camshaft can significantly boost its performance. A high-quality camshaft can optimize valve timing, leading to improved airflow and combustion efficiency. This, in turn, results in increased horsepower and torque, providing you with a more exhilarating driving experience. If you're seeking that extra punch when you hit the gas pedal, a new camshaft is the way to go. Enhanced Durability: The camshaft, bearings, and gaskets are fundamental components of your engine's internal structure. Over time, wear and tear can cause these parts to degrade, potentially leading to catastrophic engine failure. By replacing these components with high-quality, performance-oriented alternatives, you're not only increasing horsepower but also reinforcing the engine's durability. This can help prevent costly breakdowns and extend the life of your BMW engine. Optimal Efficiency: Efficiency is a key factor in engine performance. Worn-out bearings and gaskets can lead to oil leaks and reduced engine efficiency. Replacing them ensures a tighter seal, minimizing oil leaks and maintaining the proper lubrication for all moving parts. This leads to better fuel efficiency and a smoother, more reliable engine operation, all while reducing maintenance costs in the long run. Increased Resale Value: Investing in high-quality components like camshafts, bearings, and gaskets not only enhances your driving experience but also adds value to your BMW. When it's time to sell or trade-in your vehicle, potential buyers or dealerships will recognize the value of these upgrades, making your car more desirable and potentially increasing its resale value. Kit for All N55/S55 Engines
Show More Show Less
Rear Toe Control Arm - Left and Right - E82, E9X
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:338098
Part#: 33326763471
Ships in 1-2 days
Starting at $ 180.99 USD
Free Shipping
Starting at $ 180.99 USD
Free Shipping
Replacement stock toe control arm (track strut) for the E82 1-series and E9X 3-series. The track strut controls the toe alignment of the rear suspension (whether the tire points in or out on a horizontal axis) It also helps to locate the suspension to the subframe. As the rubber bushings wear, the tire can actually drift in and out of alignment, resulting in a loose or unstable handling feel (especially when accelerating in a corner). This is the stock replacement that fits either the Left or Right side of the vehicle.

This item fits the following BMWs:
2008-2012 E82 BMW 128i 135i
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive - Sedan
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2013 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive - Coupe
2007-2013 E93 BMW 328i 335i - Convertible
Show More Show Less
Packaged by Turner - Corporate Logo
T#:338035
Part#: 24117593565
Ships in 1-2 days
Sale - Save 14% $ 151.99

This product was last offered at the strikethrough price on
07-06-2026

Starting at $ 131.33 USD
Free Shipping
Sale - Save 14%
$ 151.99

This product was last offered at the strikethrough price on
07-06-2026

Starting at $ 131.33 USD
Free Shipping
GA6L45R Transmission
Automatic transmissions are reliable, shift smoothly, and can last without issue so long as they are properly maintained. Over time, the transmission fluid becomes thick and the filter becomes contaminated with small metal particles. This can cause excess wear, high transmission operating temperatures, and eventual failure. To prevent this we recommend changing your filter, fluid, and seals to ensure your transmission continues to operate flawlessly. We recommend filter and fluid changes every 50,000 miles. This filter fits GA6L45R automatic transmissions on BMW E82 128i E9X 328I 328XI E83 X3 3.0I 3.0SI

This item fits the following BMWs:
2008+ E82 BMW 128i
2006+ E90 BMW 328i 328xi 328i xDrive
2007+ E92 BMW 328i 328xi 328i xDrive
2007+ E93 BMW 328i 328xi 328i xDrive
2007+ E83 BMW X3 3.0i X3 3.0si - with GA6L45R transmission
Show More Show Less

Packaged by Turner - Corporate Logo
T#:24112776
Part#: E9XN52SMFKT
Ships in 3 Business Days
$ 1,691.99

This product was last offered at the strikethrough price on
08-13-2026

$ 1,666.99 USD
Free Shipping on orders $49 and up
$ 1,666.99 USD
Free Shipping on orders $49 and up
Dual-mass flywheels allow for fluid-feeling clutch engagements and offer a more luxurious feel than single-mass flywheels. However, with these benefits come significant drawbacks. Dual-mass flywheels are expensive, with the cost of replacement often being double or triple that of converting to a single-mass flywheel. Single-mass flywheels can be resurfaced, eliminating the need to replace them with the next clutch service, something that is not recommended with dual-mass flywheels as they contain a rubber section that is more failure-prone in high-mileage applications. Single-mass flywheels lack the complexity of dual-mass flywheels, making them inherently more reliable. Dual-mass flywheels contain a rubber damper or hub that will, like all rubber components, wear out with time. Also, Many enthusiasts prefer to eliminate BMW's "Self Adjusting Clutch", which has been known to provide an unpredictable, inconsistent engagement point. Valeo's conversion kit has been designed to maintain nearly identical clutch and flywheel weight, ideal for keeping the clutch quiet and easy to drive. Kit contents: Single-mass flywheel Non-Self Adjusting Clutch and pressure plate Throw out bearing Pressure plate bolts Flywheel bolts Transmission service kit Guide tube Input and output shaft seals Pilot bearing Clutch fork pivot pin Mounting bolt set
Show More Show Less

SPEC Clutch Kit With Billet Single Mass Flywheel - Stage 2
For Vehicles with Production Date from 02/09 with 6 Bolt Crank
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:41931277
Part#: SB53A3STG2KT
Back Ordered
$ 1,547.99 USD
Free Shipping on orders $49 and up
$ 1,547.99 USD
Free Shipping on orders $49 and up
The SPEC Clutch Kit With Billet Single Mass Flywheel – Stage 2 delivers performance you can feel, making it the go-to solution for BMW enthusiasts looking to push their build without compromising drivability.
Show More Show Less
SPEC Clutch Kit With Billet Single Mass Flywheel - Stage 3+ ...
For Vehicles with Production Date from 02/09 with 6 Bolt Crank
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:41931281
Part#: SB53A3STG3PKT
Back Ordered
$ 1,735.99 USD
Free Shipping on orders $49 and up
$ 1,735.99 USD
Free Shipping on orders $49 and up
For BMW owners demanding consistent performance, faster throttle response, and long-lasting clutch life, the SPEC Clutch Kit With Billet Single Mass Flywheel – Stage 3+ delivers unmatched value and performance.
Show More Show Less

M3/1M Front And Rear Control Arm Upgrade Kit
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:28104822
Part#: 37142283867TKT
Ships on Jan 11, 2027
Sale - Save 1% $ 1,054.99

This product was last offered at the strikethrough price on
05-03-2026

$ 1,043.71 USD
Free Shipping on orders $49 and up
Sale - Save 1%
$ 1,054.99

This product was last offered at the strikethrough price on
05-03-2026

$ 1,043.71 USD
Free Shipping on orders $49 and up
Featuring quality aftermarket M3 control arms plus Performance Rear Trailing arms Wanting more out of your BMW without having horrid ride quality? This is not only an extremely common handling upgrade, but one of the best upgrades you can do. These control arms are much sturdier than your factory units and feature much stiffer bushings and ball joints. Not only does this kit give you an extremely effective upgrade, it's the perfect excuse to get rid of your factory arms that are at the edge of being road worthy. Not sure about ECS Tuning's Upgraded Trailing arm? Let us explain... Factory steel rear trailing arms flex, causing undesired suspension geometry changes under load. BMW engineered a failure point into this stock arm - metal fatigue combined with shock forces from a pothole or curb, have been shown in some cases to cause the arm to buckle, turning a pleasant drive into a visit by roadside assistance. ECS Tuning's Performance Rear Trailing Arm Set is an upgrade that has been engineered to address these issues, while also being lighter and more attractive than the factory steel component. Elimination of a factory-designed failure point and an all-around stiffer design mean greater peace of mind as well as more confident handling with no unintended geometry changes. Combined with new M3/1M front and rear control arms for the ideal suspension set-up for your car. Kit Features: quality aftermarket M3/1M Front Control Arms quality aftermarket M3/1M Rear Control Arms ECS Upgraded Rear Trailing Arm BMW Headlight Leveling Sensor Rod BMW Rear ABS Bracket quality aftermarket Rear Guide Rods Trailing Arm features: Constructed from solid 6061-T6 aluminum Anodized for corrosion resistance Increased strength versus the factory steel arm - this arm fears no pot holes 25% lighter (384 grams versus 517 grams each)
Show More Show Less
Packaged by Turner - Corporate Logo
T#:401626
Part#: 1165764928990KT5
Ships in 8 Business Days
Sale - Save 5% $ 2,687.99

This product was last offered at the strikethrough price on
05-03-2026

$ 2,560.87 USD
Sale - Save 5%
$ 2,687.99

This product was last offered at the strikethrough price on
05-03-2026

$ 2,560.87 USD

Turbo maintenance has become part of our daily lives here. Our Service department does several turbo overhauls, wastegate adjustments, carbon cleaning, and upgrades every week. For the DIY owner, however, having a complete overhaul kit takes some of the stress out of 135/535 turbo replacement and this kit includes all of the basic items. It's highly likely N54 turbos will have to be replaced before 100,000 miles. Signs of a failing turbo are high oil consumption and blue smoke from exhaust (not from a leak or failing CCV system) because the internal oil seals are no longer retaining oil. Without critical lubrication and cooling effects from oil, the turbo shafts and bearings are usually the first to wear and that requires a complete rebuild. You might also see increased turbo lag or failure to hold boost, which is usually a sign of a failing wastegate or some other internal issue. With any internal problems the turbos need to be replaced. 

This package uses new (not rebuilt) Mitsubishi turbochargers (the original supplier to BMW). These are essentially direct replacement turbos but we went straight to the manufacturer instead of going through BMW. They are the same as the factory turbos but without a BMW logo so you save yourself a few hundred dollars. It includes everything that needs replacement during a 135 or 535 N54 twin turbo overhaul -

  • Front and rear new OEM Mitsubishi turbos (the original supplier of BMW turbos)
  • 1 gallon of Genuine BMW coolant
  • ​16 - ASA M7x39 studs
  • 16 - Flange nuts
  • All required gaskets and o-rings
  • Water pump install hardware
  • Replacement vacuum hose
  • T-bolt clamps

These are brand-new turbos so a core charge does not apply.

Show More Show Less

N54 Twin Turbo Replacement Kit
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:401602
Part#: N54TTRKT
Ships in 8 Business Days
Sale - Save 5% $ 2,629.99

This product was last offered at the strikethrough price on
05-03-2026

$ 2,504.34 USD
Sale - Save 5%
$ 2,629.99

This product was last offered at the strikethrough price on
05-03-2026

$ 2,504.34 USD

Turbo maintenance has become part of our daily lives here. Our Service department does several turbo overhauls, wastegate adjustments, carbon cleaning, and upgrades every week. For the DIY owner, however, having a complete overhaul kit takes some of the stress out of 135/535 turbo replacement and this kit includes all of the basic items. It's highly likely N54 turbos will have to be replaced before 100,000 miles. Signs of a failing turbo are high oil consumption and blue smoke from exhaust (not from a leak or failing CCV system) because the internal oil seals are no longer retaining oil. Without critical lubrication and cooling effects from oil, the turbo shafts and bearings are usually the first to wear and that requires a complete rebuild. You might also see increased turbo lag or failure to hold boost, which is usually a sign of a failing wastegate or some other internal issue. With any internal problems the turbos need to be replaced. 

This package uses new (not rebuilt) Mitsubishi turbochargers (the original supplier to BMW). These are essentially direct replacement turbos but we went straight to the manufacturer instead of going through BMW. They are the same as the factory turbos but without a BMW logo so you save yourself a few hundred dollars. It includes everything that needs replacement during a 135 or 535 N54 twin turbo overhaul -

  • Front and rear new OEM Mitsubishi turbos (the original supplier of BMW turbos)
  • 1 gallon of Genuine BMW coolant
  • ​16 - ASA M7x39 studs
  • 16 - Flange nuts
  • All required gaskets and o-rings
  • Water pump install hardware
  • Replacement vacuum hose
  • T-bolt clamps

These are brand-new turbos so a core charge does not apply.

Show More Show Less

Turner E82/E9X N55 2009-11 Performance Package - Stage 3
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:582817
Part#: N55S3PPKT1
Ships in 7 Business Days
$ 2,666.00 USD
$ 2,666.00 USD
If you want to get the most out of your BMW's N55 3.0L, it is important to have the proper supporting modifications to achieve your goals. We have built out our power packages that include all the needed items to build upon each other for the best possible power gains. This kit includes all of the similar components as the Stage 2 kit: a Pheonix Racing aluminum performance charge pipe for increased flow, a Burger Motorsports JB4 tuner module to manage your power gains every step of the way, a Wagner EVO 2 intercooler, and a BMS high flow intake. Stage 3 adds a Wagner catted high flow downpipe to increase exhaust flow for maximum power. Not for sale or use in the state of California.
Show More Show Less
Turner E82/E9X N55 2009-11 Performance Package - Stage 2
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:582815
Part#: N55S2PPKT1
Ships in 7 Business Days
$ 1,767.00 USD
$ 1,767.00 USD
If you want to get the most out of your BMW's N55 3.0L, it is important to have the proper supporting modifications to achieve your goals. We have built out our power packages that include all the needed items to build upon each other for the best possible power gains. This kit includes all of the similar components as the Stage 1 kit: a Pheonix Racing aluminum performance charge pipe for increased flow and a Burger Motorsports JB4 tuner module to manage your power gains every step of the way. Stage 2 adds the Wagner EVO 2 intercooler that allows for a 90% increase in airflow volume. To handle this increase in airflow, Stage 2 also includes a new BMS Intake to increase airflow without restriction. Not for sale or use in the state of California.
Show More Show Less
Packaged by Turner - Corporate Logo
T#:24344778
Part#: ECSTMSPDBKT
In Stock
Sale - Save 8% $ 1,190.99

This product was last offered at the strikethrough price on
05-03-2026

$ 1,096.14 USD
Free Shipping on orders $49 and up
Sale - Save 8%
$ 1,190.99

This product was last offered at the strikethrough price on
05-03-2026

$ 1,096.14 USD
Free Shipping on orders $49 and up
Turner recommends running drivetrain mounts of all the same variety - if you are using poly engine mounts, you should also use poly transmission mounts. This kit is your solution to make sure all components of your vehicle are working with each other to achieve the performance you're looking for. Polyurethane material is more resistant to water, ozone, and chemicals, maintaining its resiliency and elasticity longer than conventional rubber. Keep your vehicle planted for spirited driving while having crisper throttle response and reduce drivetrain movement along with wheel hop. Kit includes: Turner Engine Mount Set - 60A Polyurethane ECS Transmission Mount Set - Street 70A Polyurethane ECS Differential Bushing Set - 95A Polyurethane ECS Subframe Mount Set - 95A - Polyurethane
Show More Show Less


Emergency Spare Tire Kit
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:15710817
Part#: M3SPAREKIT1KT
Ships in 1-2 days
$ 537.99 USD
$ 537.99 USD
Since BMW eliminated spare tires and paired uncomfortable run-flat tires with inflation kits, drivers have been seeking an easy, low-stress way of moving to conventional tires. Whether you're looking for peace of mind on a roadtrip without relying on an inflation kit, or just looking to expand tire options away from run-flats, this kit is ready to throw in the trunk and go Includes: Genuine BMW 17x3.5" ET30 steel emergency spare wheel Kumho Tire 135/80/17 spare tire (mounted and balanced) Genuine BMW spare tire jack Genuine BMW lug wrench Genuine BMW wheel wedge
Show More Show Less
European Socket Starter Kit
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:41695009
Part#: EUROHEADSET1KT
Ships on Oct 20, 2026
Sale - Save 18% $ 124.99

This product was last offered at the strikethrough price on
05-03-2026

$ 102.15 USD
Free Shipping on orders $49 and up
Sale - Save 18%
$ 124.99

This product was last offered at the strikethrough price on
05-03-2026

$ 102.15 USD
Free Shipping on orders $49 and up
Exceptional tools designed to handle all types of European fasteners with ease.
Complete Front & Rear Brake Package - E82 135i
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:338792
Part#: TMS14344
Ships on Oct 23, 2026
$ 1,330.99

This product was last offered at the strikethrough price on
03-24-2026

Starting at $ 1,125.74 USD
Free Shipping
Starting at $ 1,125.74 USD
Free Shipping

This brake package for the E82 135i comes with everything you need to perform a major brake overhaul --

Rotor Options:

  • Zimmermann coated rotors
  • Genuine BMW Performance Dimpled & Slotted rotors
  • ECS 2-piece floating front rotors with BMW Dimpled & Slotted rear rotors

Pad Options:

  • OEM pads
  • aftermarket dust-less
  • street performance

Additional items included:

  • Rotor retaining screws
  • Front and rear pad wear sensors
  • Brake fluid

Our brake package uses the same replacement parts from the same manufacturers as BMW dealers use to service your car. The big difference is that we're able to offer these parts for a substantial savings from the dealer markup price. As an independent company we're able to buy our parts from multiple OEM suppliers whereas BMW dealers must buy their parts from BMW. We're able to shop from different vendors which gets you a better price while still maintaining original quality. You don't have to pay high prices at the dealer to get the same quality and performance.

In some cases, we offer performance alternatives to the OEM items. For an enthusiastic BMW owner, the standard BMW part may be inadequate and we offer an upgraded part, based on our 20+ years of BMW tuning experience. We seek out high quality suppliers and designs that we would want on our own vehicles. Many times performance parts will fix a design flaw with the original BMW part, improving your performance at the same time.
 

Brake Package FAQ:
Brake Pad Buying Guide
Brake Rotor Buying Guide

 

This item fits the following BMWs:
2007-2012 E82 BMW 135i

 

Show More Show Less

Packaged by Turner - Corporate Logo
T#:340365
Part#: TMS16432
Ships on Jan 18, 2027
Starting at $ 857.54 USD
Free Shipping
Starting at $ 857.54 USD
Free Shipping

This packages covers the major components you would install along with a new water pump or thermostat. On the N54 cars (135i, 335i, 535i) the water pump and theremostat are mounted together. In fact, to get to the thermostat, BMW expects you to remove the water pump. This package covers the whole job. With the electric water pump now an integral part of the efficiency and performance of the engine, staying on top of its maintenance and replacement is the smart thing to do.

Our water pump/thermostat overhaul includes:

  • OEM VDO electric water pump, p/n 11517588885 or 11517632426
  • OEM mounting screws for water pump (set of 3), p/n 11517602123
  • OEM Behr thermostat, p/n 11537549476
  • Original BMW connecting hose from thermostat to water pump, p/n 11537545665
  • Original BMW hose clamps for hose (x 2)
  • BUY AS A PACKAGE AND SAVE $$!

    The water pump on the N54 engine has more cooling responsibilities than ever before. Not only must it provide cooling for the engine, but it's also pumping fluid used to cool the turbocharger oil and automatic transmission oil. The good news is that the pump only works when, and only as much, as it needs to. The engine computer dictates how much fluid needs to be pumped through the system depending on the load. That means the system can actually stop the pump when warmer temperatures are needed. No longer is the pump spinning all the time from an engine-driven belt. The bad news is that it's now an electrical part, so a failure is usually immediate and with no warning. And if the electronics are at fault, there is no way to rebuild or repair it. Fortunately, the engine computer will force a shut down or reduce power if a problem occurs, preventing catastrophic engine damage.

    How to avoid a water pump failure in the future? Replacing the water pump as part of a regular interval schedule will ensure you always have a functioning pump in place. Since this technology is relatively new for BMW, therefore the lifecycle of the pump isn't yet known, we have been recommending replacement every 80-100k miles. This package of OE/OEM parts covers everything with Original BMW coolant offered to finish off the job. A proper bleeding procedure must be followed with the new electric pump.

    This water pump package fits the following BMWs with the N54 engine:
    2007-2010 E60 BMW 535i 535xi 535i xDrive
    2008-2010 E82 BMW 135i
    2011-2012 E82 BMW 1M Coupe
    2006-2010 E90 BMW 335i 335xi 335i xDrive - Sedan
    2007-2010 E92 BMW 335i 335is 335xi 335i xDrive - Coupe
    2007-2010 E93 BMW 335i - Convertible
Show More Show Less

OEM Water Pump And Thermostat Kit - N55 3.0L
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:557277
Part#: N55WTKT3
Ships on Jan 18, 2027
$ 806.99 USD
Free Shipping
$ 806.99 USD
Free Shipping

The water pumps in these BMW models are known for failure near 80,000 miles is a very common issue often times leaving the owner stranded. This kit provides a single stop for water pump and thermostat replacement needs to save the search and get you back on the road.

Kit includes:

  • OEM Wahler Thermostat
  • OEM VDO Electric Water Pump
  • Genuine BMW Antifreeze/Coolant
  • OEM VDO Mounting hardware required for both the thermostat and water pump
Show More Show Less
Level 3 Timing Chain Kit - N54
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:640350
Part#: TMSN54TMGKT
Back Ordered
Sale - Save 1% $ 816.99

This product was last offered at the strikethrough price on
08-13-2026

$ 811.41 USD
Sale - Save 1%
$ 816.99

This product was last offered at the strikethrough price on
08-13-2026

$ 811.41 USD
The N54 in your BMW is an interference engine, meaning that if the timing chain were to fail your engine would suffer catastrophic damage due to valvetrain components colliding with each other. Over time the timing chain will start to wear and stretch, potentially causing it to skip timing or just completely fail. Also, the timing tensioners themselves could fail! Early symptoms of timing chain wear include front end noise not associated with VANOS, or slapping noises coming from the timing cover. Turner Motorsport has assembled a complete kit that includes everything necessary, as well as small hardware, to completely service the timing on your N54. Tools needed to do the job can be found on our site as well. Kit Contents: 6 Bosch high power spark plugs Genuine BMW timing sprocket wheel 6 Genuine BMW crank pulley bolts Genuine BMW center bolt for crankshaft Febi chain tensioner with gasket Continental accessory belt Febi accessory belt tensioner INA idler pulley with hardware Febi timing chain guide rail and tensioner Genuine BMW timing chain slide rail Genuine BMW bearing bolt IWIS timing chain Victor Reinz valve cover gasket Victor Reinz front crankshaft seal 7 quarts of Genuine BMW synthetic engine oil and a Mann oil filter 1 gal Genuine BMW coolant
Show More Show Less

Timing Chain Kit - N55
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:640375
Part#: 113175840841KT1
Ships in 2 Business Days
$ 703.48

This product was last offered at the strikethrough price on
08-31-2026

$ 703.27 USD
$ 703.27 USD
The N55 in your BMW is an interference engine, meaning that if the timing chain were to fail your engine would suffer catastrophic damage due to valvetrain components colliding with each other. Over time the timing chain will start to wear and stretch, potentially causing it to skip timing or just completely fail. Also, the timing tensioners themselves could fail! Early symptoms of timing chain wear include front end noise not associated with VANOS, or slapping noises coming from the timing cover. Turner Motorsport has assembled a complete kit that includes everything necessary, as well as small hardware, to completely service the timing on your N55. Tools needed to do the job can be found on our site as well.
Show More Show Less
Rear Toe Control Arm - E82 1M, E9X M3
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:338097
Part#: 33322283549
Back Ordered
Starting at $ 89.14 USD
Free Shipping
Starting at $ 89.14 USD
Free Shipping
This arm controls the toe alignment in the M3 rear suspension. When these bushings wear out the tire loses toe control and the tire has too much lateral in/out movement. This can make the handling feel very nervous and imprecise and like the rear end is steering itself.

The rear toe arm is sold per side (both sides are the same). We offer this as the Original BMW part.

This item fits the following BMWs:
2012-2013 E82 BMW 1M Coupe
2008-2011 E90 BMW M3 - Sedan
2008-2013 E92 BMW M3 - Coupe
2008-2013 E93 BMW M3 - Convertible
This fits 1M/M3 models only. It is not used on non-M models.
Show More Show Less

N54 High Pressure Fuel Pump Replacement Kit
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:401622
Part#: 13517616446RKT1
In Stock
$ 1,808.99

This product was last offered at the strikethrough price on
06-19-2026

$ 1,807.99 USD
Free Shipping
$ 1,807.99 USD
Free Shipping

N54 HPFP failure is common with BMWs that use this powerplant. Our Packaged by Turner N54 High Pressure Fuel Pump Replacement Kit includes everything you need to replace your N54 HPFP.

Kit includes:

  • Genuine BMW Re-manufactured High pressure fuel pump
  • Intake manifold gasket sets  
  • Throttle body gasket 
  • Low pressure fuel sensor 
  • High pressure fuel sensor 
Show More Show Less

Turner Comprehensive Power Steering Service Kit - E9X 335i/is, E82/88...
10X Entries Into Our F80 M3 Sweepstakes
For vehicles without active steering only
Packaged by Turner - Corporate Logo
T#:569003
Part#: E9X335PSSKT
Back Ordered
$ 738.99

This product was last offered at the strikethrough price on
08-13-2026

$ 710.99 USD
Free Shipping
$ 710.99 USD
Free Shipping
BMW power steering systems can be a pain when it comes to leaks, especially as the car ages. The hoses break down and the power steering filter in the reservoir becomes contaminated. To restore leak free, smooth operation of your power steering, we offer these Turner Motorsport Comprehensive Power Steering Service Kits. These kits contain all of the items you will need to replace old components with new OEM quality hoses, seals, and a new reservoir as well as the recommended power steering fluid for your BMW! This kit is great for routine maintenance or for when replacing your power steering pump or steering rack!
Show More Show Less
Front Wheel Bearing - E90 E92 E82 E84 E89
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:338070
Part#: 31216765157
In Stock
Starting at $ 126.99 USD
Free Shipping
Starting at $ 126.99 USD
Free Shipping

Front Wheel Hub Assembly with Bearing fits BMW E90 E92 E82 E84 E89. This is the OEM FAG brand. Requires 4 wheel bearing hex bolts - #3112676203 per wheel bearing.This bearing can be used on the left or right side. Sold individually.

FAG is an OE supplier to BMW as well as several other German marques. 

GSP is a high-quality supplier for aftermarket suspension components. They have quickly position themselves as an industry leader, and pride themselves on offering high-quality alternatives to their expensive OEM counterparts.


This item fits the following BMWs:
2008+ E82 BMW 128i 135i 135is
2006-2011 E90 BMW 325i 328i 330i 335d 335i - Sedan
2006-2012 E91 BMW 328i - Wagon
2007-2013 E92 BMW 328i 335i 335is - Coupe
2007-2013 E93 BMW 328i 335i M3 - Convertible
2013+ E84 BMW X1 sDrive28i
2009+ Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is

Show More Show Less
Liqui Moly MolyGen Oil Change Kit / Inspection I
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:15677532
Part#: 114279531290KT
In Stock
Sale - Save 10% $ 143.99

This product was last offered at the strikethrough price on
08-31-2026

$ 129.37 USD
Free Shipping on orders $49 and up
Sale - Save 10%
$ 143.99

This product was last offered at the strikethrough price on
08-31-2026

$ 129.37 USD
Free Shipping on orders $49 and up
This new generation oil is made with a quality synthetic base and includes a molecular friction modifier for reduced friction and wear. It also glows under UV light so leaks can be easily traced! This unique oil contains a fluorescent green chemical friction modifier to smooth out hard metal surfaces, reducing overall engine wear and heat due to friction. Tests have shown a reduction in friction coefficient of as much as 15%! MolyGen oil is also a great choice for modern turbocharged engines which produce much more heat. The kit contains: Seven Quarts of Liqui Moly MolyGen Engine Oil Oil Filter Kit ECS Magnetic Drain Plug with Crush Washer
Show More Show Less


Packaged by Turner - Corporate Logo
T#:1241361
Part#: E9XPERFSUSR2KT
Ships on Nov 6, 2026
$ 1,909.99

This product was last offered at the strikethrough price on
09-02-2026

$ 1,907.94 USD
Free Shipping
$ 1,907.94 USD
Free Shipping
We put together the ultimate rear geometry overhaul kit to lock down your chassis, eliminate unwanted flex, and give you pin point alignment control. Whether you're setting up for aggressive street driving, track days, or full blown racing, this package transforms how your BMW puts power to the ground.
Show More Show Less
Genuine BMW Oil Change Kit / Inspection I
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:15644287
Part#: 11427953129-KT
In Stock
Sale - Save 3% $ 129.99

This product was last offered at the strikethrough price on
08-31-2026

$ 125.84 USD
Free Shipping on orders $49 and up
Sale - Save 3%
$ 129.99

This product was last offered at the strikethrough price on
08-31-2026

$ 125.84 USD
Free Shipping on orders $49 and up
This kit contains Seven Liters of BMW Synthetic Engine Oil Engine Oil Filter Oil Drain Plug Gasket (Included with filter kit)