BMW X Series E84 (2013-2015)

Replace the flimsy plastic bleeder screw used in the coolant expansion tank or in one of the cooling system hoses with this high quality, durable, aluminum bleeder screw. The stock plastic screw can deform over time due to heat or even regular use. We have even seen the head of the screw snap off, leaving the threaded body stuck in the expansion tank. This aluminum screw will help to prevent sudden failure of the bleeder screw, which can result in immediate overheating of the car.

ECS Tuning's Aluminum Coolant Bleeder Screw replaces Genuine BMW Part Number 17111712788

Why not upgrade when you're due for a replacement? The ECS Tuning silicone hose replacement fixes these issue with two key features in their design. Offering this hose in a much more heat resistant silicone instead of OE rubber and having the hose wrapped in aluminum. The aluminum coating acts as a heat shield to further protect the silicone as well as reducing the temperatures forced on the coolant running through the hose. 

Replaces OE hose #11537545665

Installs bushings straight and true with minimal effort. Includes tools for both iron and aluminum calipers. Purchase only one tool set for your entire caliper guide bushing upgrade - tools are not one time use.

***Click here for installation instructions*** 

The rear lower control arms on E82/E9X models are the weakest link in the rear suspension. The arm is made from folded sheetmetal and it bends and deforms easily. Not only will it deform from potholes and curbs, tow truck drivers love to hook onto them without realizing how weak they are. We have seen other race teams complete the box section to make them stronger. A bent arm will throw off the geometry in the suspension, potentially affecting handling and tire wear. These aluminum arms are both lighter and stronger than the factory sheetmetal arms and is the best solution for chronic bending of the stock arm. These are a direct replacement to your stock arms with no changes needed to your alignment. New high-grade hardware is included.

Note: the stock arm is designed from the factory to be intentionally weak. These arms will bend so that something else in the suspension does not break. Our race cars used the stock sheetmetal arm but we replaced them often. We found that it was better to finish a race with a bent arm than not finish due to a catastrophic failure. The ECS arms are still designed to be the weakest link but are far stronger than the factory arm and will not bend as easily.

This item fits the following BMWs:

2008-2013 E82 E88 BMW 128i 135i 1M Coupe
2006-2011 E90 BMW 325i 325xi 328i 328xi 330i 330xi 335i 335xi M3 - Sedan
2007-2011 E91 BMW 325i 325xi 328i 328xi - Touring Wagon
2007-2013 E92 BMW 328i 328xi 335i 335is 335xi M3 - Coupe
2007-2013 E93 BMW 328i 335i 335is M3 - Convertible

Engineered for vehicles with vacuum-actuated exhaust valves, the ECS Remote Vacuum Exhaust Valve Control Kit puts you in complete command of your exhaust sound. This fully standalone system lets you open or close your valves instantly—no reliance on factory controls, drive modes, or complicated wiring.

At its heart is a self-contained vacuum pump and dedicated control module, operating entirely independent of your vehicle’s electronics. The result is broad compatibility with both OEM and aftermarket exhaust systems, allowing for the freedom to switch between aggressive performance sounds and a refined, quiet tone at the touch of a button.

Kit Includes:

Standalone Vacuum Pump – Delivers consistent vacuum for reliable valve function

Wiring Harness Options – Choose from a reversible cigarette lighter power adapter or a length of wire for custom hardwiring

High-Quality Vacuum Hose – Durable, leak-resistant construction for long-lasting performance

Remote Controllers – Compact fobs for easy operation from inside or outside the vehicle

Features:

Instant open/close control for exhaust valves

Operates completely independent of factory electronics

Universal compatibility with vacuum-actuated valve systems

Ideal for both aftermarket and factory exhaust setups

From stealthy early-morning starts to unleashing your exhaust’s full roar on demand, the ECS Remote Vacuum Exhaust Valve Control Kit gives you total control over your car’s voice—whenever and wherever you want it.

Upgraded replacement for your crankcase vent hose P#11127584128 featuring upgraded silicone, stainless steel clamps, and new OE connectors and seals.

Enhance your BMW N55 engine with our Silicone Crank Case Vent Hose, a premium replacement for the fragile, failure-prone factory hose. Over time, the stock plastic hose deteriorates due to constant exposure to heat and oil, leading to cracks and leaks. Our solution? A high-quality silicone hose engineered for superior durability and long-term reliability.

To further enhance performance, we’ve lined the hose with fluorosilicone, providing exceptional resistance to oil and chemical degradation. Designed in-house using advanced CAD modeling and 3D scanning, this hose offers a precise OEM fit while eliminating the common weaknesses of plastic construction.

Each kit includes stainless steel hose clamps for a secure, hassle-free installation. Whether you’re replacing a worn-out CCV hose or upgrading for added peace of mind, this premium solution ensures your BMW N55 runs smoothly and efficiently for years to come.

Features:

Arrives preassembled with new OE fittings and seals
Direct OEM Fit – Retains factory hose dimensions while eliminating reliability issues.
High-Performance Silicone – Resists heat-related wear for long-lasting durability.
4-Ply Fluorosilicone Lining – Superior protection against oil and chemical exposure.
Stainless Steel Clamps Included – Secure installation and extended service life.
Give your BMW N55 the reliability it deserves—upgrade to the ECS Tuning Silicone CCV Hose today!

Upgrade your exhaust system with the 2.5" Stainless Steel 3-Bolt Flange - Priced Each. This high-quality flange is designed to provide a durable and reliable connection for your exhaust components. Made from stainless steel, it offers corrosion resistance and longevity, ensuring a lasting performance. Whether you're repairing or customizing your exhaust system, this flange is an essential component for a secure fit.

• Durable stainless steel construction
• Corrosion-resistant for long-lasting performance
• Provides a reliable connection for exhaust components
• Suitable for repair or customization of exhaust systems

Universal High-Flow Air Filter

Give your engine the airflow it deserves with this reusable, high-performance air filter—perfect as a direct replacement for an ECS intake system or as the finishing touch for your custom intake project.
Dimensions: 4.5" Base OD • 6" Filter Height • 3.5" Top OD

Upgrade from your restrictive factory filter to an ECS Tuning High-Flow Dry Air Filter and let your engine breathe freely. Improved intake flow enhances power throughout the rev range while helping maintain efficient fuel economy.

Oiled vs. Dry Filters — Which Is Right for You?

Oiled Filters

Offer slightly higher airflow for maximum performance

Require more frequent cleaning

Must be re-oiled after each cleaning

Long-term reusable design saves money over disposable paper filters

Dry Filters

Provide excellent airflow with minimal maintenance

Easily cleaned with warm, soapy water—no oiling required

Still flow significantly better than OE paper filters

Fully reusable and cost-effective

Both versions deliver superior performance over stock filters while offering the long-term benefit of reusability. Choose the option that best fits your maintenance style and performance goals.

Protect Your Wheels with ECS Tuning Wheel Lock Sets

Safeguard your valuable wheels with ECS Tuning Wheel Lock sets, providing an extra layer of protection against theft without requiring expensive alterations. Bid farewell to concerns about wheel security, especially after investing significant time in searching for the ideal wheels or painstakingly polishing each mesh spoke.

These wheel locks effectively replace one of your wheel bolts, ensuring heightened security and peace of mind. Each kit includes a special socket tool for convenient removal. With a factory bolt length of 38mm and a conical seat design, these locks are compatible with most aftermarket wheels. However, exercise caution and avoid overtightening or using air tools. Also, note that lock keys are specifically oriented to fit bolts in a single, precise position.

From years of European automotive experience, the enthusiasts at ECS Tuning have developed a strong understanding of what it takes to produce a quality high-performance brake pad. After thousands of miles and many different pad compounds, they've landed on the ideal blend for the new EP24 "Enthusiast Performance" brake pad! If you're looking for a streetable, track-capable, performance brake pad, look no further than the ECS EP24!

Features & Benefits:

Strong stopping power - Increased coefficient of friction offers satisfying stopping power when cold (a necessity for a street pad!) and even more G-force-inducing power when they warm up. With cold and warm friction comparable to Hawk HPS (and higher than many other street pads) the stopping experience with the EP24 pad is impressive for street-driven vehicles on streetable tires. Positive initial bite - Race pads have the reputation of acting like an on/off switch, which is a no-go for a pad for a street application. The EP24 offers OE-level initial bite for low-stress braking in stop-and-go situations. Reasonable dust - Race pads utilize a high metallic composition. Pads that use high amounts of metal not only dust terribly, but also will bake onto wheels with high temperatures and are a bear to clean. This is not the case with these performance street pads. Now using these pads on most of our shop cars, we’ve found over time that dust is comparable to factory pads in most applications (with greatly improved braking performance). Quiet braking - It’s not a race pad, so it shouldn’t squeal like one. While not as quiet as our ceramic DD23 pad, you’ll still be able to drive your spouse to dinner. Long life - This should be an obvious one. Even in a performance pad, your daily driver pads should last and last, so that was key in selecting our ideal compound. This compound wears slower and is kinder to rotors than two of the top competitors.

EP24 "Enthusiast Performance" brake pads are included in our Lifetime Replacement Program for worry-free motoring.

Upgrade your BMW's wheel system effortlessly with this stud conversion kit, comprising Conical Seat Lug Nuts (20) and 70mm Wheel Studs (20). This conversion provides a permanent solution for wheel changes, saving you valuable time and minimizing hassle. With the simple screw-in installation of the supplied studs, you'll experience enhanced efficiency.

• Permanent wheel hangers for quicker wheel changes
• Time-saving and hassle-free solution
• Facilitates easier wheel installation and removal
• Minimizes wear on wheel hubs
• Quick and easy tire changes
• Supports spacers up to 20mm

Note: Thread-locking compound is recommended during installation. Studs should be torqued to 15Nm.

From years of European automotive experience, the enthusiasts at ECS Tuning have developed a strong understanding of what it takes to produce a high-quality brake pad. After thousands of miles and many different pad compounds, they've landed on the ideal blend for the new DD23 "Daily Driver" brake pad! This enthusiast-developed pad offers confident stopping power, very low dust, quiet braking, and a positive initial bite. The perfect choice for your daily-driven Euro!

If you find yourself “pumping the brakes” over the brake pad selection process for your daily driver, your answer is this DD23 pad. This is the one!

As a team of enthusiasts who own all types of European cars, we have the advantage of the exposure that comes with the enthusiast lifestyle - and have a strong understanding of what makes a great brake pad. In the pursuit of a really great brake pad for daily driving, we’ve tested a wide range of brake pads. After thousands of test miles, iterating through a variety of pad compounds, we’ve landed on the ideal blend for our DD23 Daily Driver ceramic pad.

Features:

Good stopping power - Brake pads need to stop your car, period, so this is key. We focused on selecting a compound that offers a healthy level of friction (both when hot and when cold) for safe, positive stopping power.

Positive initial bite - You should feel your brakes engage as you press the pedal, but it should not feel like an on/off switch! Advanced ceramic composition means you’ll enjoy a smooth transition on and off of the brake pedal, meaning your passengers will have a comfortable ride in stop-and-go traffic. We’ve hit a good balance here.

Very low-dust - Some factory-installed pads are eye-poppingly dusty, which is a no-go for us. Thanks to the composition of this ceramic pad, which is copper-free and contains a negligible amount of other metals, dust is both lighter in color and very limited in amount. We’ve improved on the “dust factor” without sacrificing on bite and stopping power as a good compromise, which will be a win for anyone who doesn’t detail daily (or anyone who does, too!)

Quiet braking - It’s not a race pad, so it shouldn’t squeal like one. Extremely low metallic composition means they will not squeal. DD23 is comfortable and quiet - both on the ears and in lack of vibration transmitted through the cabin.

Long life - This should be an obvious one. Your daily driver pads should last and last, so that was key in selecting our ideal compound. This is another benefit to having ceramic material composition versus a softer organic pad (which have higher metallic and various organic elements) and wear much faster. Ours are kind to rotors, too (no accelerated wear characteristics) for many miles of motoring.

Bring out the sound of your turbo with the ECS Atmospheric Diverter Valve Spacer! The ECS DV Spacer gives your N20 the sound of a blow off valve (BOV) with every gear change and every boosted throttle close! The strategically engineered vent slots allow you to boost on without a CEL (Check Engine Light).

FEATURES:

Anodized Black 6061-T6 aluminum

Features 3 radial slots to let out the “woosh” with optimal flow for all OEM DV types

Engineered to operate CEL-FREE!

Alignment holes for ease of installation

Includes pre-installed, captured Viton O-rings, resistant to chemical degradation

Includes Zinc-plated alloy steel socket head cap screws

Tested for performance and durability

INSTALLATION:

Remove Diverter Valve
Place the spacer onto the DV flange r
Re-install your original DV solenoid atop the spacer with the included longer hardware.
The wastegate actuator must be swung out of the way for install. Loosen both screws retaining the wastegate actuator, then remove the one closest to the actuator, allowing the actuator to swing out of the way. This will allow for ease of installation.

Enhance your BMW's wheel changing process with a stud conversion kit, facilitating faster and more convenient wheel swaps. This kit includes 20 Conical Seat Lug Nuts and 20 78mm Wheel Studs, offering a permanent wheel-hanging solution that saves time and hassle. By screwing in the provided studs, you'll be ready to go without complexities.

Product Benefits:

• Permanent wheel-hanging solution
• Saves time and hassle during wheel changes
• Versatile use with spacers of up to 30mm
• Facilitates easier wheel installation
• Reduces wear on wheel hubs

Note: Thread-locking compound is recommended during installation. Studs should be torqued to 15Nm.