The ZF 8-speed automatic transmission (8HP) has become the go-to choice for performance enthusiasts, delivering lightning-fast shifts, impressive torque handling, and ample tuning potential. However, the stock transmission pan falls short in critical areas. Its plastic construction, integrated non-replaceable filter, and limited fluid volume leave little margin for error in demanding conditions.

To address these limitations, we've engineered a premium solution: a cast aluminum transmission pan that boosts durability, cooling performance, and serviceability. Designed with enthusiasts in mind, this upgraded pan increases fluid capacity by 1 liter to reduce transmission temperatures and improve long-term reliability, even under aggressive driving or track conditions.

Built to outlast and outperform the OEM plastic pan, the aluminum construction resists damage from road debris and eliminates the risk of cracking. Our pan is hard-coat anodized in black for superior corrosion protection and a long-lasting finish that looks as good as it performs.

Our aluminum pan upgrade is engineered to work seamlessly with the OEM G8X 8HP transmission filter (24007855263), allowing for easy and cost-effective fluid service. Integrated magnets help to trap metal particulate, extending the life of your transmission by keeping contaminants out of the fluid.

Key Features:

Cast aluminum construction offers superior strength and resilience over the OE plastic pan

Increased fluid capacity (+1L) enhances thermal management and reduces the risk of overheating

Serviceable design uses the OEM G8X transmission filter for easy, affordable maintenance

Hard coat anodized finish provides exceptional corrosion resistance and longevity

Integrated magnets collect metallic debris, protecting transmission internals

Installation:

Vehicle plastic belly pans may vary. Because the Turner 8HP transmission pan is taller to allow for increased fluid capacity, some vehicles may require trimming of the plastic belly pan, or the belly pan may need to be installed over the transmission pan where it may make contact.

Maintain the longevity of your BMW's manual transmission and differential by incorporating this fully synthetic 75w90 weight gear oil into your maintenance routine. Flushing and replacing fluids at specified intervals, as per your owner's manual, is crucial to prevent costly issues in the future. Explore the benefits of this gear oil:

• Specifically designed for BMW manual transmissions.
• Fully synthetic hypoid gear oil for high performance.
• Excellent protection in diverse weather conditions.
• Maximum wear protection and precise functionality.
• Enables longer oil change intervals.

Meets Specifications:

• API GL4, GL5, MT-1
• MIL-PRF 2105 E

Ensure optimal performance for your BMW with the Genuine BMW LT-5 Manual Transmission Fluid. Specifically formulated to meet BMW specifications, this 1-liter container of SAE 75W80 fluid is designed for manual transmissions. Keep your BMW's transmission running smoothly and efficiently with this authentic BMW fluid.

• Genuine BMW Quality: Ensures compatibility and meets the high standards set by BMW.
• Optimal Transmission Performance: Specifically formulated for manual transmissions, enhancing overall performance.
• Precise Specifications: Meets BMW's LT-5 specifications for a perfect fit and function.
• 1-Liter Capacity: Convenient packaging for easy use and precise fluid measurement.

Upgrade your BMW's manual transmission with the Genuine BMW LT-5 Manual Transmission Fluid, providing the quality and performance your BMW deserves.

Rein Transfer Case Fluid TF 0870 is designed to service your BMW xDrive transfer case, ensuring optimal performance and reliability. This genuine BMW fluid is essential for maintaining the efficiency of your transfer case, especially if you are nearing or exceeding the 60,000-mile mark. Using Rein Transfer Case Fluid TF 0870 helps to catch up on crucial maintenance and keep your vehicle running smoothly.

• Genuine BMW Fluid: Ensures compatibility and peak performance for BMW xDrive transfer cases.
• Optimal Performance: Helps maintain the efficiency of the transfer case, enhancing overall vehicle reliability.
• Preventive Maintenance: Ideal for vehicles approaching or exceeding 60,000 miles to ensure continued smooth operation.
• High-Quality Formulation: Designed to meet BMW's specifications for superior protection and longevity.

For GA6HP19Z Automatic Transmissions

Automatic transmissions are reliable, shift smoothly, and can last without issue so long as they are properly maintained. Over time, the transmission fluid becomes thick and the filter becomes contaminated with small metal particles. This can cause excess wear, high transmission operating temperatures, and eventual failure. To prevent this we recommend changing your filter, fluid, and seals to ensure your transmission continues to operate flawlessly. We recommend filter and fluid changes every 50,000 miles.

NOTE: This filter fits GA6HP19Z automatic transmissions. This will NOT fit the GA6L45R transmission. Please check your transmission to ensure it is the correct type.

This kit contains:

(1) Oil Pan with Filter

(1) Oil Pan Gasket

(1) Filter O-Ring

(1) Drain Plug

Explore the Turner Motorsport Shell Transfer Case Fluid - 1 Liter, designed to meet the exacting standards of BMW xDrive systems, commonly found in X5 and X3 models. This Shell S-Tec OE spec fluid ensures optimal performance and protection for your BMW's transfer case. Changing this fluid in conjunction with transmission fluid every 50-60,000 miles brings several benefits, ensuring a smooth and reliable driving experience.

• Specifically formulated for BMW xDrive systems.
• Compatible with X5 and X3 models.
• Shell S-Tec OE spec fluid for superior performance.
• Regular changes enhance transfer case and transmission longevity.
• Ensures smooth and reliable operation under various driving conditions.

Maintain the performance of your BMW xDrive system with the Turner Motorsport Shell Transfer Case Fluid, an essential component for optimal functionality.

Top Tec 1200 Synthetic Automatic Transmission Fluid - 1 Liter

Discover the ideal choice for BMW enthusiasts – Top Tec 1200 Synthetic Automatic Transmission Fluid. Meticulously crafted to meet BMW's rigorous standards, this premium synthetic ATF promises peak transmission performance.

Key Features:

• High-Performance Formula: Top Tec 1200 ATF features a high-performance formula, optimizing your BMW's transmission for unparalleled efficiency and durability.
• Unmatched Wear Protection: This synthetic ATF excels in wear protection, minimizing friction and averting premature wear and tear, ensuring a silky-smooth transmission operation.
• Fuel Efficiency Boost: Its advanced formulation enhances fuel efficiency, catering to eco-conscious BMW drivers looking to reduce their carbon footprint.
• Steadfast Temperature Performance: Top Tec 1200 ATF remains steadfast in extreme temperatures, assuring seamless gear shifts year-round.
• Extended Fluid Lifespan: With a long-lasting composition, it reduces the need for frequent fluid changes, saving time and money on maintenance.
• BMW Optimized: Tailored for BMW vehicles, this ATF ensures a perfect fit and peerless compatibility.

Elevate your BMW's transmission performance with Top Tec 1200 Synthetic Automatic Transmission Fluid. Safeguard your investment and enjoy a smoother, more efficient driving experience. Order your 1-liter bottle today!

All sets of 12 now 10% off regular price!

Synthetic D4 ATF is suitable for use where Dexron III, Dexron II, or Mercon fluids are recommended. ATF D4 is similar to Red Line's MTL formula and can be used in many BMW manual transmissions where MTF or MTF-LT2 is called for. The D4 ATF provides significantly improved gear protection than most OEM oils. The balanced frictional characteristics provides smooth and consistent shifts for extended drain intervals. The superior stability compared to petroleum ATFs allows high-temperature operation without varnishing valves and clutches which leads to transmission failure.

Features:

• Provides G-4 level gear protection (suitable for transmissions and transaxles, like the Corvette T-56).
• Provides smooth and consistent shifts.
• More stable than petroleum fluids; suitable for extended drain intervals.
• Does not varnish at high temperatures.
• Improved cold weather characteristics.

This all-encompassing tool kit facilitates the removal and reinstallation of the transfer case mount, providing adapters and other essential components for the task at hand. Tailored for a diverse range of BMW models equipped with AWD or xDrive systems, the kit is thoughtfully packaged in a plastic blow-molded carrying case.

Applications: X3, X5, X6, 530xi, 525xi, 325xi, 330xi, 328xi, 528xi, 535xi, 335xi, X6, 528i xDrive, 535i xDrive, 328i xDrive, 335i xDrive, and X1.