H&R BMW Suspension Parts for BMW E92 M3 S65 4.0L

The H&R Coil Over kit takes the traditional shock/spring package one step further. H&R combines their progressive-rate springs with specially valved shocks and adds height adjusters that let you set the ride height to your own personal tastes. These coil overs are designed for street use with progressive rate springs that start out soft and stiffen as they are compressed. This helps to keep the ride compliant while still giving better handling and balance.

H&R designs each suspension to work as a coil over. This means that the correct amount of travel has been built into each shock. And the shocks are valved specifically for the spring rates to give a tight and controlled ride without being harsh or ultra-stiff. Each H&R coil over is TUV tested and approved and meets ISO quality standards. These are used with the stock strut and shock mounts for a quick and easy install. This suspension is a direct replacement for cars without EDC. For an EDC-equipped model you will need an EDC emulator and non-EDC mounts.

SPECIAL PRICING FOR A VERY LIMITED TIME!
FREE GROUND SHIPPING


Height adjustment range:
F: -1.0-1.6"
R: -.3-1.3"



This coilover suspension kit fits the following BMWs:
2008-2011 E90 M3 sedan
2008-2013 E92 M3 coupe

• 52% stiffer than the factory E90/E92 M3 bar. 42% stiffer than the E93 M3 bar!
• 27mm straight across (not a tapered center like the E93 M3 factory bar)
• Solid core, not hollow like the stock bars (better at resisting twist)
• Forged, non-adjustable steel ends
• Highest tensile steel strength available

The H&R for the E9X M3 is the best anti-roll bar option for the E9X M3. Don't be let down by the "small" size compared to the factory sway bar sizes - there are some big differences! We've had our in-house suspension engineers run the math and the H&R swaybar is over 52% stiffer than the factory E90/E92 M3 bar and even over 42% stiffer than the E93 M3 sway bar upgrade. There are several reasons for this - the stock sway bars are hollow (for lighter weight) and will twist more than the solid H&R bar. Also, the E93 M3 bar is often called a 28mm bar but it actually tapers down in the center to 24mm which greatly reduces its effectiveness. So if you're looking for a serious sway bar upgrade, the H&R is clearly the way to go. Note: to maintain the handling balance of the car, we recommend only using the front bar with the matching H&R rear bar or heavily revised racing suspension.

For a more in-depth analysis of the E9X front sway bar differences, check out our FAQ!

This bar re-uses the factory M3 sway bar bushings and brackets.

This item fits the following BMWs:
2011+ E82 BMW 1M Coupe
2008+ E90 BMW M3
2008+ E92 BMW M3

The same ride height as the standard H&R Sport springs but with a stiffer spring rate geared even more towards track performance. Fits all 2008+ E90 M3 sedan and E92 M3 coupe, with AND without electronic dampening control (EDC).

After thousands of street and track miles in our own 2008 M3 sedan project car (the white car pictured), we loved the way the "standard" H&R Sport Springs felt on both the street and track. Since the ride was so compliant on the street (even with 20" wheels), we felt some M3 owners might want to sacrifice some of the street ride quality for an even firmer spring rate that would handle even BETTER on the track. We asked, and H&R delivered -- and the H&R Sport PLUS springs for the E9x M3 were the answer. The same "ideal" ride height with a more aggressive spring rate that is still tolerable on the street (though not as forgiving as the standard H&R Sport springs) and more at home on the track.

M3 with Stock BMW Suspension
Front Lowering 1.0"
Rear Lowering 0.6"

M3 with Competition Package
Front Lowering 0.75"
Rear Lowering 0.25"

This item fits the following BMWs:
2008-2011 E90 BMW M3
2008-2013 E92 BMW M3