BMW Sway Bar Kits for BMW E92 M3 S65 4.0L

• 52% stiffer than the factory E90/E92 M3 bar. 42% stiffer than the E93 M3 bar!
• 27mm straight across (not a tapered center like the E93 M3 factory bar)
• Solid core, not hollow like the stock bars (better at resisting twist)
• Forged, non-adjustable steel ends
• Highest tensile steel strength available

The H&R for the E9X M3 is the best anti-roll bar option for the E9X M3. Don't be let down by the "small" size compared to the factory sway bar sizes - there are some big differences! We've had our in-house suspension engineers run the math and the H&R swaybar is over 52% stiffer than the factory E90/E92 M3 bar and even over 42% stiffer than the E93 M3 sway bar upgrade. There are several reasons for this - the stock sway bars are hollow (for lighter weight) and will twist more than the solid H&R bar. Also, the E93 M3 bar is often called a 28mm bar but it actually tapers down in the center to 24mm which greatly reduces its effectiveness. So if you're looking for a serious sway bar upgrade, the H&R is clearly the way to go. Note: to maintain the handling balance of the car, we recommend only using the front bar with the matching H&R rear bar or heavily revised racing suspension.

For a more in-depth analysis of the E9X front sway bar differences, check out our FAQ!

This bar re-uses the factory M3 sway bar bushings and brackets.

This item fits the following BMWs:
2011+ E82 BMW 1M Coupe
2008+ E90 BMW M3
2008+ E92 BMW M3

After shocks and springs, sway bars make the biggest change in handling. Larger swaybars will reduce bodyroll and understeer. The car will corner flatter with the tire in better contact with the pavement. New urethane bushings are included.

This is a rear 15mm sway bar that is larger than the factory sway bar.

The aFe Control Sway Bar Set is a great upgrade option for your high performance BMW. Its front and rear, tubular design is stiff but balanced to keep your car flat and neutral in tight turns. CNC bent bars and CNC machined and TIG welded bar ends plus a 2-stage powder coated finish make these bars very high quality and durable enough to withstand years of abuse and still look great. Included are CNC machined 6061-T6 rear sway bushing brackets that are anodized black and polyurethane bushings.

Product Features:

• CNC Bent, Lightweight Tubular Alloy Steel 32mm Front, 29mm Rear Sway Bars
• 2 Position, CNC Machined, TIG Welded Bar Ends
• Includes Polyurethane Bushings and CNC Machined 6061-T6 Aluminum Brackets (Rear)
• 2 Stage Tangerine Orange, Powder-coated Finish
• Direct Fit Installation, Requires No Modifications

Fits the following BMWs:
2008-2013 E90/2 BMW M3

Looking to reduce body roll and improve your handling? it turns out that aFe knows a thing or two about making your car handle. Not content to just offer air intake systems, aFe offers suspension components as well. These CNC-bent, powdercoated tubular aluminum sway bars are both lightweight and stiffer than stock. Each bar includes new polyurethane sway bar bushings and machined aluminum brackets.

Fits the Following BMWs:

E90 E92 E92 M3

Looking to reduce body roll and improve your handling? it turns out that aFe knows a thing or two about making your car handle. Not content to just offer air intake systems, aFe offers suspension components as well. These CNC-bent, powdercoated tubular aluminum sway bars are both lightweight and stiffer than stock. Each bar includes new polyurethane sway bar bushings and machined aluminum brackets.

Fits the Following BMWs:

E90 E92 E92 M3