Over 13 CFM more airflow than factory intake plenum! Beautiful Carbon Fiber construction with a roaring induction sound!

At Turner Motorsport, all our Carbon Fiber Intake Systems are top-of-the-line custom-engineered products that we developed in house. Our engineers took it upon themselves to design a prettier, cost effective Carbon Fiber Intake Plenum for S65 owners to compliment our E9x Carbon Fiber Intake System while retaining OEM features. Our S65 Carbon Intake Plenum is no different. Our Carbon Fiber Intakes start with a 3D scan of the factory intake and engine bay. Our Engineers use these 3D images of the chassis to design the intake plenum in SolidWorks modeling software. Using a Flow Bench, the Intake Plenum is then airflow tested against the factory intake, to ensure optimal airflow improvement against stock. The final product is a beautiful and functional Carbon Fiber Intake Plenum, CAD designed for perfect integration with the OEM inlet ducting and stock mounting locations. Our Carbon fiber Intake trumpets flow an average of 13 CFM over the stock BMW intake.

Our E9X M3 S65 Carbon Fiber Intake Plenum is made from 100% high grade prepreg 2x2 twill weave carbon including the internal trumpets, this plenum replaces the OEM plastic plenum allowing the naturally aspirated BMW V8 engine to generate more inductions sounds taking the driving experience of the M3 to a whole new level. The raw V8 rumble gives the M3 an almost CSL like sound and is truly an intoxicating experience. We went through several iterations using different carbon thicknesses to fine tune the sound and the resulting plenum generates an almost unbelievable induction volume and tone.

Our Carbon Fiber Intake Plenum can be used with the OEM airbox or any aftermarket intake system. Paired with our E9X M3 intake system, you're sure to upgrade the look and sound of your S65 engine.

Design Features and Benefits:

CAD designed Intake System for perfect integration with the OEM connections and stock mounting locations.
Carbon intake is manufactured using 2X2 twill weave carbon fiber for a great look in the engine bay.
Plenum is protected by a gloss finish clear coat for UV protection.
Uses OE intake temp sensor and hose locations
Provides same fitment as OE intake
Performance:

Carbon fiber Intake trumpets flow an average of 13 CFM over the stock BMW intake.
\

Faulty Map Sensors can lead to a rough idle and lost performance. Replace yours with a Genuine BMW MAP sensor to restore a smooth idle and performance.

Genuine BMW Pressure Sensor -
This item fits the following BMW Chassis:
E90,E92,E93

Fits BMW Engines including:
S65

Upgrade Your BMW's Performance

Elevate your BMW's performance with our specialized High Performance Replacement Filter designed for the Stage 2 Intake Charge Kit. Engineered to optimize and enhance the stock intake system, this filter guarantees maximum airflow for improved engine efficiency.

• Direct replacement for OEM filter panel
• Washable and reusable cotton gauze for increased airflow
• Removal of charcoal-impregnated lining enhances airflow
• Durable sidewall construction ensures long-lasting performance
• Provides a secure, leak-proof seal with factory air box
• Multi-layered pleats maximize airflow while maintaining protection levels
• Maintains OEM filter's debris collection efficiency
• Preserves BMW engineered pressurized air box and factory appearance
• Includes adapter for EU or MY10+ models for universal fitment

Note: Compatible exclusively with the Stage 2 Intake Charge Kit.

Supported Models: 2008+ E9X M3

The factory plastic gears in BMW S65 throttle body actuators are notorious for premature wear due to mechanical stress, engine vibration, and heat cycling. Over time, this wear leads to excessive play, throttle response issues, and eventual failure. This can cause DME fault codes, limp mode, and DSC malfunctions. While replacing both throttle actuators is costly, even new OEM units will eventually suffer the same fate.

Thankfully, ECS has developed the ultimate solution for E9X M3 owners! These Upgraded Throttle Body Actuator Gears are constructed of Teflon-reinforced nylon, significantly reducing friction and gear tooth wear for long-term reliability. Each gear comes pre-installed on a 4140 steel shaft, strengthening the assembly and preventing further failure.

Servicing the internals of S65 throttle body actuators can be a challenging task due to their intricate design. To simplify the process, ECS has developed a complete plug-and-play replacement kit. This kit includes two brand-new OEM Continental/VDO throttle body actuator assemblies, rebuilt with upgraded ECS gears and shafts for simplified installation and long-term durability. Unlike rebuilt actuators, this solution minimizes the risk of internal electrical failures, providing superior protection against common failure modes.

Features & Benefits:

Upgraded Teflon-reinforced nylon gears – Superior to factory plastic-on-plastic gears, reducing wear and extending lifespan. 4140 steel shafts – Increases durability and simplifies installation. Pre-installed inside OEM Actuators – Decreases install complexity and reduces the risk of electrical failure in rebuild units. Prevents common actuator failures – Resolves worn gear issues that cause CELs, limp mode, and DSC/DME errors. Cost-effective alternative to full actuator replacement – Saves hundreds in parts and labor. Factory-like fitment – Engineered for precise compatibility and long-term reliability. Built to withstand heat and mechanical stress – Ensures consistent throttle performance and extended service life.

Genuine BMW E9X M3 Fuel System Throttle Housing Assy

Genuine BMW E9X M3 Fuel System Throttle Housing Assy is the perfect upgrade for your high-performance BMW. This premium throttle housing assembly is designed to deliver precise fuel and air mixture for enhanced engine performance and responsiveness. Ideal for enthusiasts looking to optimize their BMW E9X M3's fuel system, this genuine part ensures reliability, durability, and peak performance.

Key Benefits:

• Enhances engine performance and throttle response
• Ensures precise fuel and air mixture
• Genuine BMW part guarantees quality and compatibility
• Durable construction for long-lasting performance
• Easy installation with a perfect fit for BMW E9X M3 models

Elevate your driving experience with the Genuine BMW E9X M3 Fuel System Throttle Housing Assy, engineered to meet the highest standards of quality and performance. Invest in a component that delivers superior results and maintains the integrity of your BMW.

Genuine BMW Throttle Housing Assy - Zyl. 1,8
This item fits the following BMW Chassis:
E90,E92,E93

Fits BMW Engines including:
S65

Upgrade your BMW or MINI with the V2 Water/Methanol Standard Controller - Internal MAP W/35PSI Max

This advanced controller optimizes the injection of water/methanol, maximizing power output while ensuring engine safety. With its internal MAP sensor and 35PSI maximum pressure capacity, it offers precise control and reliability under various driving conditions. Experience improved horsepower, torque, and fuel economy with this state-of-the-art controller from a trusted brand.

• Enhances performance and efficiency for BMW and MINI vehicles
• Maximizes power output while ensuring engine safety
• Internal MAP sensor for precise control
• 35PSI maximum pressure capacity for reliability
• Improves horsepower, torque, and fuel economy