BMW Engine Parts for BMW 3 Series E93 (2007-2013)

Often an oversight in maintenance, ignition components are also susceptible to wear and tear. Spark Plugs can accumulate carbon, reducing the spark intensity and it's ability to properly ignite the air/fuel mixture, leading to misfires and generally declining performance. Other ignition components, such as coils, boots, wires, caps, and rotors, can also wear out over time due to factors like heat and contamination, preventing the current from reaching the spark plug.

To start over fresh with all new components, we now offer these Ignition Service Kits. Each kit comes with brand new OE quality components, replacing any potential fault points in your ignition system for peak performance!

See kit contents below for a complete list of included components.

Poor idle, low fuel efficiency, and engine misfire codes are all symptoms of worn spark plugs. Replace yours with quality factory direct parts to get your engine running as well as possible.

These plugs from BMW are the solution for all of these problems. Over the years, the electrode wears away on spark plugs, causing too large of a gap and weak spark. Additionally, excess carbon can build up and bridge the gap to negatively effect performance. Replace yours with these factory correct units to regain your power, fuel efficiency, and smooth a poor idle.

If you are replacing any aspect of your ignition system, it's best to replace all serviceable components. By doing so, your ignition system will work in better harmony, freeing up hidden horsepower and raising fuel economy. Skim the ECS Tuning ignition area under your model for spark plugs, wires, coil packs and more to get your vehicle into top shape.

Often an oversight in maintenance, ignition components are also susceptible to wear and tear. Spark Plugs can accumulate carbon, reducing the spark intensity and it's ability to properly ignite the air/fuel mixture, leading to misfires and generally declining performance. Other ignition components, such as coils, boots, wires, caps, and rotors, can also wear out over time due to factors like heat and contamination, preventing the current from reaching the spark plug.

To start over fresh with all new components, we now offer these Ignition Service Kits. Each kit comes with brand new OE quality components, replacing any potential fault points in your ignition system for peak performance!

The kit includes:

6 Genuine BMW Coils with locks
6 Genuine BMW spark plugs
BMW spark plug service label for your records
1 packet of American Grease Stick dielectric grease

VTT is proud to announce a ground-up system designed to give the end-user complete control over their valve cover/ PCV set up. Tired of being told you will run two -10 lines from your VC to your Catch Can? So were we. Now you can run them any way you want, including complete VTA, oil cap one-way breather, etc.

Nothing on the market comes close to the versatility of this setup, and it truly is the ULTIMATE Valve cover and PCV combo.

This option allows you to purchase a ready-to-install kit with all fittings, hoses, check valve, etc for you to bolt on, and go.

Kit Break down is as follows:

Two Catch Cans

One N54 dual can bracket

Banjo Fittings

Vacuum Adapter fitting for Throttle body

Two Hoses from Valve Cover to Cans

Hose from Low side can to Vaccum Adapter fitting

VTA (Vent to Atmosphere) Breather

Inline Check Valve

NOTE This catch can kit is designed to work with the Vargas Modular Valve Cover only and is not compatible with a stock valve cover.

Looking to increase power without sacrificing reliability or drivability? This Stage 1+ Power Pack from COBB Tuning is a great option! Including COBB's Accessport V3, a High Flow Air Filter, and COBB Front Mount Intercooler, you will get dramatically colder charge air, increased flow, and increased power output without having to make any modifications!

In addition to greater, colder air flow, the Accessport V3 allows for easy fuel map and tuning changes plus real time monitoring of 6 parameters at a time!

BMW N54 Stage 1+ Power Package w/V3

• BMW-001 Accessport V3
• Easily Change Maps with the Push of a Button
• High Flow Air Filter
• Front Mount Intercooler
• 60% Larger Volume Core

Fits the following BMWs:
E82/88 BMW 135i 1M
E9X BMW 335i/is/xi

BMW N54 3.0L MAHLE Forged Piston Kit 84.50mm delivers exceptional performance and reliability for BMW engines. This high-quality piston kit is designed to replace the weaker factory cast aluminum pistons with robust forged pistons, enhancing durability and heat tolerance for extreme engine conditions.

• Enhanced Strength: Forged from 2618 aluminum, these pistons are more resistant to extreme heat, detonation, and high pressure, providing superior performance.
• Precision Specifications:
  • Bore: 84.50mm
  • Stroke: 89.6mm
  • Rod: 145.05mm
  • CH: 31.7mm
  • Piston Style: Dish with 4 valve reliefs
  • Crown Volume: 17.2cc
  • Piston Mass: 314g
  • Pin Diameter: 22mm
  • Pin Style: Floating
• Complete Kit: Includes pistons, pins, clips, and rings (1.0mm, 1.2mm, 2.8mm thickness).
• Durable Coatings: Features phosphate, Grafal, and hard anodized top ring groove for added longevity.
• Sold as a Set: Comes as a set of 6 pistons.

MAHLE Motorsport's PowerPak and PowerPak+ piston kits are engineered for both high-performance and everyday driving, offering a reliable upgrade for BMW engines. With over 95 years of performance experience, MAHLE Motorsport provides advanced features and superior quality for your engine build.

Going single on your N54 powered vehicle? You are going to have a few ports that need blocking on your motor. These fittings are just the ticket allowing you to block one or both of the water fittings on the block, block the rear drain, adapt the front drain for -10 AN, and convert your push in style feed to a 1/8"NPT to fit any number of fitting options.

All fittings are Made from 6061-T6 aircraft aluminum with black anodizing for a long-lasting finish and come with the O-ring needed.

This part fits the following BMW engines:
2006-2012 N54