Brake Service Kits for BMW 3 Series E93 (2007-2013)

Featuring ECS V5 Drilled & Zinc-Coated Brake Rotors and ECS EP24 "Enthusiast Performance" Brake Pads. Everything you need to service your front and rear brakes in an afternoon in one simple kit from Turner Motorsport.

By providing it all for you in a single click, Turner has made it easier than ever to get the quality replacement matching components you need when beginning a brake service. Our brake service kit includes rotors, pads, sensors, assembly grease, and even a full compliment of set screws to make your brake replacement easy. A complete matched kit assembled by our team of experts will keep all of your brake components working in perfect harmony.

Includes the following parts:

Front & Rear ECS V5 Drilled & Zinc-Coated Brake Rotors Front & Rear ECS EP24 "Enthusiast Performance" Brake Pads Front & Rear OE Brake Pad Wear Sensors Stainless Steel Rotor Set Screws (8) AGS Brake Lubricant Packet (2) Turner Motorsport stocks a large inventory of premium brake components, including hoses, hard lines, fluids, hardware, and hi-temp lubricants. Everything you need to perform a professional quality brake service, you can find at Turner Motorsport.

When replacing your worn out brakes, the market is flooded with performance options. If your BMW doesn't see track time, it's not very practical. Performance pads and rotors tend to result in a lack of bite at low braking temperatures and cause excessive noise in daily driven vehicles that becomes irritating. BMW brakes from the factory are perfectly suited for trips around town, across the country, and even the occasional spirited driving session, delivering smooth, quiet, and long lasting performance. 

Included in this E9X BMW brake package are all of the OEM equivalent components needed to replace your Front brakes with comfort, reliability, and optimal lifespan in mind.

Brake components in this kit:

• Pagid Front Brake Pads
• Zimmerman Front Rotors
• New Front Wear Sensors
• Brand New Stainless Steel Set Screws
• Syl-Glide Silicone Brake Lubricant 

Fits the following BMWs:
2006-2013 E9X BMW M3
2011-2012 E82 BMW 1M

When replacing your worn out brakes, the market is flooded with performance options. If your BMW doesn't see track time, it's not very practical. Performance pads and rotors tend to result in a lack of bite at low braking temperatures and cause excessive noise in daily driven vehicles that becomes irritating. BMW brakes from the factory are perfectly suited for trips around town, across the country, and even the occasional spirited driving session, delivering smooth, quiet, and long lasting performance. 

Included in this E9X BMW brake package are all of the OEM equivalent components needed to replace your Front brakes with comfort, reliability, and optimal lifespan in mind.

Brake components in this kit:

• Akebono Euro Front Brake Pads
• Zimmerman Front Rotors
• New Front Wear Sensors
• Brand New Stainless Steel Set Screws
• Syl-Glide Silicone Brake Lubricant 

Fits the following BMWs:
2006+ E9X BMW 335i/is/xi/d
2012-2015 E84 BMW X1 xDrive35i

This performance brake service kit includes ECS 2-Piece performance rotors, Hawk HPS pads, new sensors, assembly grease, and set screws to make your brake upgrade quick and easy.

Includes the following parts:

Front ECS 2-piece semi-floating cross-drilled and slotted rotors Rear ECS 2-piece semi-floating cross-drilled and slotted rotors Front and Rear ECS EP24 "Enthusiast Performance" Brake Pads Front URO and rear URO pad wear sensors ECS stainless steel rotor set screws Brake lubricant compound packets

Turner Motorsport has made it easier than ever to get the high-quality upgrade components you need for your next brake service—all in a single, convenient kit. Our performance brake service kit includes premium ECS rotors, ECS EP24 "Enthusiast Performance pads, a wear sensor, assembly grease, and a full set of rotor set screws, ensuring a seamless upgrade process. Expertly assembled for perfect compatibility, this kit is designed to keep your braking system performing at its best.

Kit Includes:

ECS 2-Piece Semi-Floating Cross-Drilled & Slotted Rotors (Rear) Rear ECS EP24 "Enthusiast Performance" Brake Pads Brake Pad Wear Sensor ECS Stainless Steel Rotor Set Screws AGS Brake Lubricant Compound Packet Upgrade your braking performance with precision-engineered components!

Turner Motorsport has made it easier than ever to get the high-quality upgrade components you need for your next brake service—all in a single, convenient kit. Our performance brake service kit includes premium ECS rotors, ECS EP24 "Enthusiast Performance pads, a wear sensor, assembly grease, and a full set of rotor set screws, ensuring a seamless upgrade process. Expertly assembled for perfect compatibility, this kit is designed to keep your braking system performing at its best.

Kit Includes:

ECS V5 Cross-Drilled & Slotted Rotors (Rear) Rear ECS EP24 "Enthusiast Performance" Brake Pads Brake Pad Wear Sensor ECS Stainless Steel Rotor Set Screws AGS Brake Lubricant Compound Packet Upgrade your braking performance with precision-engineered components!

F30 M Performance brakes for your E9X 325/328/330/335! This kit uses the factory M Performance front and rear Brembo multi-piston calipers and rotors for a bolt on braking upgrade. Everything comes complete -

The ECS M Performance Big Brake Kit includes:

• Orange 4 Piston Brembo front calipers from the F3X M Performance brake kit 
• Orange 2 Piston Brembo rear calipers from the F3X M Performance brake kit (custom machined, with brackets)
• Front 370x30mm ECS 2-piece rotors
• Rear 350x24mm ECS 2-piece rotors
• ECS Exact-Fit Stainless Steel Brake Lines
• Genuine BMW front & rear brake pad set (use any M Performance - fitment brake pad)
• Class 12.9 mounting hardware, brake fluid, pad wear sensors

Performance:

• Bias - 63.3% front, 36.7% rear – optimally balanced for the e9x chassis
• Brake torque – 4% increase results in more responsive braking system
• Pedal feel – firmer pedal feel for improved modulation
• Improved cooling & heat management - brake deeper, harder, with less fade

More on ECS Exact-Fit Stainless Steel Brake Lines (the same tried-and-true style you've probably been running for years):

• Independently tested for DOT compliance to the FMVSS 571.106 standard for brake lines
• Volumetric expansion verified at 17% of the maximum allowable for low expansion hose at 1500 psi, with a burst strength of nearly 2.5x the required minimum.
• Tensile pull strength of nearly double the minimum requirement. Whip resistance of over double the required test limit. Passes 24hr salt spray test with flying colors 24hr salt spray test - no white or red rust.
• Exceptional resistance to expansion under extreme line pressure results in improved pedal feel and braking response. Each line quality inspected and pressure tested to 3000psi.

More on ECS 2 piece Cross-Drilled/Slotted Rotors: 

• Weight savings: save 2 lbs per axle versus the genuine BMW rotor.
• Increased thermal capacity and Improved cooling:  
  • Heat convection (due to air flow) is considered the most important mode of heat dissipation in rotor design. The key to this is adequate air flow through the rotor.
  • ECS 2-Piece rotors feature side-specific directionally curved vanes which pump air through the rotor at a higher velocity, leading to consistent, rapid cooling on both sides equally.   
  • The air velocity in curved vane rotors is higher than pillar-post rotors and straight vane rotors, and as such curved vane rotors have been shown to cool more effectively.
• Manufacturing quality: Manufactured exclusively for ECS Tuning in an ISO 9001 certified facility
• Testing:  ECS 2-piece rotors have been subjected to thousands of miles of hard street use and to the elements (including snow and salt) for years. They have also been subjected to scientific brutal stress testing on the track and brake dyno, performing countless high-speed stops in quick succession.  We have measured stopping distances and elevated rotor temperatures of over 1000*F for long sustained periods (to the point of rotor bluing and catching brake pads on fire), as well as subjecting rotors to careful post-test inspection for signs of irregular wear, warping, stress cracking, or any other signs of failure.

• ECS rotors have proven themselves to be robust, demonstrating excellent wear characteristics, no warping, no thermal stress cracking, no signs of hot spots and minimal pad glazing.​

This is a direct fit to all non-M E9X and comes with a lot more braking power than standard (especially on non-335 models). You can use any F30 brake pad with these (OE BMW come standard) so there are a lot of street and track pad options. The rear calipers have been especially modified to work with the ECS caliper bracket.

Requires 18" wheels and wheel spacers may be required depending on wheel spoke design.

Enhance your BMW's braking performance affordably and effortlessly with the Power Stop Z26 Street Warrior Brake Kit. This comprehensive kit offers improved braking and enhanced brake cooling for an upgraded driving experience. Included in the package are:

• Drilled and Slotted Rotors
• Extreme Carbon-Fiber Ceramic brake pads
• Stainless steel hardware
• New guide-pin bushings
• High-temperature brake lubricant

The Power Stop Extreme carbon-fiber ceramic brake pads reduce dust production compared to standard pads while delivering high-performance stopping power without compromising everyday drivability. These pads also minimize brake noise, ensuring quiet stops wherever you drive.

The kit's upgraded rotors feature precision drilling for enhanced cooling and rounded slots on the friction surface, effectively clearing away gas and debris for smooth and safe braking. Additionally, the Silver Zinc Dichromate plating protects against rust and corrosion, preventing the formation of rust lips and potential weak points, ensuring long-lasting rotor durability.

Upgrade your braking performance affordably and effortlessly with the Power Stop Z23 Evolution Sport Brake Kit. This kit contains precisely matched rotors and pads with upgraded stainless steel hardware, new pin bushings, and high-temperature brake lubricant for a complete brake enhancement.

The Power Stop Evolution carbon-fiber ceramic brake pads in this kit reduce dust production, enhance stopping power, and maintain everyday drivability while minimizing brake noise for noise-free braking in all conditions.

The upgraded rotors undergo precision drilling for improved cooling, feature rounded slots on the friction surface to eliminate gas and debris effectively, and are coated with Silver Zinc Dichromate plating. This coating prevents rust and corrosion, maintaining a clear contact patch for smooth, safe braking while preventing rust lip formation and potential weak points after extended use.

ECS M Performance Big Brake Kit: Upgrade Your BMW's Braking Power

Elevate your BMW's performance with the ECS M Performance Big Brake Kit. This kit offers a unique retrofit of F30 M Performance brakes onto E9X non-M models, providing exceptional braking power and a striking appearance. Included are M Performance Brembo calipers, ECS 2-piece rotors, Exact-Fit Stainless Steel Brake Lines, and Genuine BMW brake pads for an all-encompassing brake upgrade.

Key Benefits:

• Enhanced brake torque and response
• Firmer pedal feel for improved modulation
• Optimal balance for the E9X chassis
• Improved cooling and reduced fade
• Tested ECS Exact-Fit Stainless Steel Brake Lines
• Weight-saving ECS 2-piece Cross-Drilled/Slotted Rotors

Upgrade your BMW E9X non-M with an OEM+ twist - the F30 M Performance Big Brake Kit. Carefully engineered and retrofitted, these brakes offer improved brake torque, pedal feel, and braking response while enhancing the visual appeal of your vehicle. Designed to be the ultimate solution, this kit includes front and rear Brembo calipers, ECS 2-piece rotors, stainless steel brake lines, genuine BMW brake pads, mounting hardware, brake fluid, and pad wear sensors.

• Enhanced brake torque and pedal feel for improved braking performance
• Optimal balance (63.3% front, 36.7% rear) for the E9X chassis
• Improved cooling and heat management to reduce fade
• ECS Exact-Fit Stainless Steel Brake Lines ensure DOT compliance and minimal expansion under pressure
• ECS 2-piece Cross-Drilled/Slotted Rotors offer weight savings, increased thermal capacity, and improved cooling
• Rigorous testing ensures durability and superior performance in various conditions