BMW 7 Series F01 (2009+)

This caliper bushing kit will eliminate flex caused by weak rubber caliper bushings. As the brake pedal is pressed the caliper grabs the rotor and twists on its mounting bushings. The rubber bushings allow the caliper to deflect and twist which affects pedal feel and results in uneven pad wear. These solid brass bushings will not twist or deflect so your calipers can squeeze the pads evenly on both sides of the rotor (sort of like what multi-piston big brakes do). This will give you much longer pad life and a more consistent pedal feel. This is the most complete kit we have ever sold with stainless steel caliper slide bolts, o-rings, and new dust boots. Unlike other kits, these bushings are pressed into the caliper and will not shift or slide on their own.

Installation is straightforward: remove the old rubber bushings and press in the new brass bushings (we recommend special tool 003326ECS03). High temp caliper grease or anti-seize is required. The new bushings include an inner o-ring that helps trap grease on the slide bolt, reducing friction and wear.

***Click here for installation instructions*** 

***Click here for the installation tool***

For most models with floating calipers. Fits the rear of E90/2 and E60, but for the front you'll need the kit found here. Does not fit E30 models with Girling calipers, but is compatible with Ate calipers. 

Enhance wheel replacement efficiency on your BMW with a stud conversion kit, facilitating quicker and easier wheel changes. This comprehensive kit includes:

• Conical Seat Lug Nuts (20)
• 75mm Wheel Studs (20)

The installation of these studs provides a permanent wheel-hanging solution, saving time and reducing hassle during wheel changes. By simply screwing in the supplied studs, you'll be ready to go.

Benefits of using wheel studs instead of wheel bolts:

• Some racing regulations mandate wheel studs for enhanced wheel-to-hub contact, ensuring added safety.
• Wheel studs accommodate various spacer widths, eliminating the need for custom bolt lengths when using spacers.
• Simplifies wheel installation; the studs act as wheel hangers while nuts secure the wheel in place.
• Reduces wear on wheel hubs as wheel studs remain in the hub, unlike constantly removed and installed wheel bolts.
• Facilitates quick and easy tire changes as wheel studs stay in place.

Note: Use thread-locking compound during installation and torque studs to 15Nm for optimal performance.

Upgrade your BMW's wheel system with this stud conversion kit for improved convenience and functionality.

Installs bushings straight and true with minimal effort. Includes tools for both iron and aluminum calipers. Purchase only one tool set for your entire caliper guide bushing upgrade - tools are not one time use.

***Click here for installation instructions*** 

Your floor jack is universal but it doesn't have to be with this adapter! Most newer BMW jack pads have an open recess inside that this adapter fits into. It's a rectangular peg for a rectangular hole. This gives the jack a much more rigid connection and almost impossible for the jack or pad to slip. You will never have to worry about scratching your rocker panels or jacking from the wrong spot - the positive connection ensures you are always lifting from the correct location. This adapter is one of those small hidden gems that you can't live without! 

Made of black anodized aluminum for added strength and corrosion resistance, the adapter fits the head of most hydraulic floor jacks, including the Schwaben Low Boy.

Compatible with most BMW jack pads for chassis E39 and up. Retrofitting jack pads is common, especially on E36/Z3 models.

Engineered for vehicles with vacuum-actuated exhaust valves, the ECS Remote Vacuum Exhaust Valve Control Kit puts you in complete command of your exhaust sound. This fully standalone system lets you open or close your valves instantly—no reliance on factory controls, drive modes, or complicated wiring.

At its heart is a self-contained vacuum pump and dedicated control module, operating entirely independent of your vehicle’s electronics. The result is broad compatibility with both OEM and aftermarket exhaust systems, allowing for the freedom to switch between aggressive performance sounds and a refined, quiet tone at the touch of a button.

Kit Includes:

Standalone Vacuum Pump – Delivers consistent vacuum for reliable valve function

Wiring Harness Options – Choose from a reversible cigarette lighter power adapter or a length of wire for custom hardwiring

High-Quality Vacuum Hose – Durable, leak-resistant construction for long-lasting performance

Remote Controllers – Compact fobs for easy operation from inside or outside the vehicle

Features:

Instant open/close control for exhaust valves

Operates completely independent of factory electronics

Universal compatibility with vacuum-actuated valve systems

Ideal for both aftermarket and factory exhaust setups

From stealthy early-morning starts to unleashing your exhaust’s full roar on demand, the ECS Remote Vacuum Exhaust Valve Control Kit gives you total control over your car’s voice—whenever and wherever you want it.

Upgrade Your BMW's Wheel Change Process with a Stud Conversion

Optimize your BMW's wheel change process with a stud conversion kit, delivering faster and simpler wheel swaps. This kit consists of Conical Seat Lug Nuts (20) and 82mm Wheel Studs (20), providing permanent wheel hangers, saving time, and streamlining the process.

• Permanent wheel hangers for quick and hassle-free wheel changes
• Simplifies the wheel installation process compared to wheel bolts
• Accommodates various spacer widths for added versatility
• Reduces wear on wheel hubs, enhancing longevity
• Facilitates quick and easy tire changes and removal

Note: Thread-locking compound is recommended during installation. Studs should be torqued to 15Nm. These studs may be used with spacers up to 20mm.

Drastically improve the looks of your vehicle while improving your vehicle's handling characteristics and/or easily adjust your wheel fitment to allow for the proper clearance when installing parts such as new wheels, big brake kits, or lowering suspension components.Interference from components such as shocks, springs, or control arms are a common issue when installing wheel that are not a direct OE size replacement. By moving your wheels a few millimeters each, you can give yourself enough clearance for proper wheel fitment and give your car a wider stance in the process.

ECS Tuning wheel spacers are constructed of high quality 6061-T6 aircraft grade aluminum and are specifically designed by in-house engineers and cnc machined to exact standards, ensuring the best fitment possible. By carefully measuring the OEM wheel hubs and bore dimensions, these spacers mount with minimal clearance to prevent any vibration, retaining the stock-like vibration free operation. 

This kit includes wheel bolts that are lab tested to meet or exceed ISO 898 class 10.9 mechanical and physical properties to ensure perfect fastening of the wheel to the hub with no issues or potential to snap under aggressive driving conditions.

ECS Tuning is a performance and genuine parts provider that designs their ECS Tuning branded aftermarket automotive parts in-house to ensure the highest quality and affordability possible. Every part's design is subjected to a rigorous test fit and stress test period to guarantee proper fitment and continued reliability for years to come.

This item fits the following BMWs:
2014+ F22 BMW 228i 228iX 230i 230 iX M235i M235iX M240i M240iX
2014+ F23 BMW 228i 228iX 230i 230 iX M235i M235iX M240i M240iX
2012+ F30 BMW 320i 320iX 328i 328iX 335i 335iX - Sedan
2012+ F31 BMW 328i 328iX - Wagon
2014+ F34 BMW 328i 328iX 335iX - Gran Turismo
2014+ F32 BMW 428i 428iX 435i 435iX - Coupe
2014+ F33 BMW 428i 428iX 435i 435iX - Convertible
2014+ F36 BMW 428i 428iX 435i 435iX - Gran Coupe
2010+ F07 BMw 535i GT, 535i xDrive GT, 550i GT, 550i xDrive GT
2011+ F10 BMW 528i 528i xDrive 535i 535i xDrive 535d 535d xDrive 550i 550i xDrive M5
2011+ F10 BMW 528i 528i xDrive 535i 535i xDrive 535d 535d xDrive 550i 550i xDrive M5
2011+ F25 BMW X3 xDrive28i X3 xDrive35i
Rear Only
2007-2013 E70 BMW X5M
2007-2014 E71 BMW X6 xDrive35i X6 xDrive50i X6M

Unsure of what size spacer will work best for you? This professional kit includes 1mm, 2.5mm, 5mm, 10mm, and 15mm spacers with wheel studs and nuts for you play with. These are not the same spacers that we sell and they cannot be used to drive on. But with the studs installed the car can be lowered to the ground and rolled to check for clearances. These test fit spacers are drilled to fit the standard BMW 5x120 bolt pattern as well as 4-lug 4x100 (and VW/Audi bolt patterns too). You can stack spacers to achieve the perfect clearance. When you're ready call us to order the spacers you need (we make 3mm, 5mm, 7.5mm, 10mm, 12.5mm, 15mm, 17.5mm, 20mm, 25mm, and 30mm spacer thicknesses).

This kit is for purchase only. It's perfect for shops or racecars where changing wheels or brakes is common. We also have kits that are available for rent.

These spacers are not for driving on. They lack the hubcentric lip that BMW wheels are designed to work with. Driving on studs alone will lead to a failure.