BMW Tools & Specialty Equipment for BMW 6 Series F06 (2013+)

This tool comes in handy especially when working with an engine harness. Certain areas are always prone to corrosion and this tool makes having to re-pin a connector a breeze.

Unlike small screwdrivers, picks, and paper clips, these tools are the correct size and shape to remove and install tiny electrical pins and terminals at plastic block connectors with ease, and will not damage the connectors in the process.

Packaged in a blow molded case to keep everything secure and organized.

When it comes to replacing the spark plugs on a N54 or N55 engine you may have already noticed the standard small spark plug socket is a bit to big. This socket is a more affordable option for your weekend tune-up.

Features:

BMW N54 and N55 3.0 liter engines MINI Gen 2 (R55, R56, R57 & R60+) Models 14mm 12-point socket 3.5" long socket Internal magnet to retain the spark plug knurled grip Don't attempt an N54/N55 spark plug replacement with a conventional spark plug socket!

PRESSURE BRAKE BLEEDER:

We know bleeding brake alone is not only no fun, but much more complicated than it needs to be. Having a pressure bleeder give you the ability to keep the pressure on the brake system while you go under and crack open the bleeder screws to relieve the air pockets.

Features:

• Holds a full 3-Liters (3.17 qts) of brake fluid
• Easy to read 0-30 lbs pressure gauge built into the tank top
• Pressure relief valve for safe release of pressure
• 40" hose with detachable swivel fitting

FLUID CATCH BOTTLE:

keep your fluid's off the floor and into our catch bottle.  The bottle has fluid level markings from 0.2L to 0.7 liter. This feature allows you to measure how much fluid you have sent thru the system.  Our bleeder bottle features an expandable/collapsible top portion for easier storage. Gasket in cap prevents leakage. Tubing is extra long at 24" from cap to nipple. Flexible hose can be pushed down into bottle for storage when done. Bottle now features a handy hanger bracket to hang bottle from bottom of car.

Note:

• Do not exceed 20 PSI
• LIFETIME REPLACEMENT

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

The Foxwell i53BT Scan Tool is the next step toward understanding why that BMW Service Engine Soon (check engine light) came on - but in a sleek, modern context that surpasses older Foxwell models (such as the NT510 or NT530).  This diagnostic tool does almost everything that you could think of in scanners, outside of some control module coding and programming that would require a much more expensive scanner or software found mostly at dealerships.  The features on this product stand out more than previous models and make it a very impressive tool at an even better price.

New Features:

• BMW and MINI Software Compatibility: Equipped with specialized software for BMW and MINI vehicles.
• High-Speed Android Operating System: Utilizes a fast Android operating system and interface, enhancing accuracy and speed in troubleshooting.
• 5.5” LCD Touchscreen: Features a responsive 5.5” LCD touchscreen that can be operated with gloves on.
• Bluetooth Wireless VCI Vehicle Interface: Offers a cordless OBD2 experience through a Bluetooth wireless Vehicle Communication Interface (VCI) plug.
• Supports DoIP and CAN FD Protocols: Compatible with Diagnostics over Internet Protocol (DoIP) and Controller Area Network Flexible Data-rate (CAN FD) protocol.
• One Touch Update via WIFI: Enables quick and seamless updates through a one-touch process via WIFI.
• One Touch Complaint Feature: Facilitates faster and more accurate issue resolution with its One Touch Complaint functionality.
• Remote Control Support: Provides access to remote control support via TeamViewer directly from the scanner home screen.
• Data Logging Service: Allows collection of communication data between the scanner and the tested vehicle, streamlining diagnostic troubleshooting.
• Wireless Diagnostic Report Printing: Supports wireless printing of diagnostic reports via WIFI for convenient documentation.
• Lifetime Free Updates: Offers free lifetime updates without the need for a subscription, ensuring continuous software enhancement.
• Expandable Vehicle Support: Easily adds support for additional vehicles with a nominal fee, increasing its versatility.

Additional Features:

• Clear engine and transmission fault codes and check engine lights
• Read soft codes (codes exist with no check engine light) to assist with preventing issues from arising
• Clear body and general module fault codes
• Clear ABS system fault codes
• Oil change, service due, and CBS reset
• Registers your battery
• Reset airbag light
• Reset TPMS light
• Data logging for future analysis

Note:

• This scan tool covers over 25 years of models, so some years and or models, on some functions may not function but will be reviewed in future updates. 
• Certain functions may be limited from the vehicle manufacturer due to the requirement of a special factory access code. 
  • Pre OBDII vehicles will have limited feature availability 
• We recommend purchasing a Bentley Manual to use with your Scan Tool.
• Can only be updated on Microsoft PC's not with Apple.
• You will need to register your scan tool in order to receive update notice's from Foxwell via E-mail
• Vehicles with 20 pin under hood connector will require ES2992111 for use 

Installation of the scanner tool plug into OBD2 port:

Please make sure pins are all straight on the end of the plug and the OBD2 port on the vehicle's side are not damaged or bent. This ensures good contact and power functionality of the scan tool. 

Support:

For software and hardware support from Foxwell the address is http://www.foxwelltech.com/support/ - Make sure you use the correct address

For after sales issues please contact Nina at [email protected]. Please allow 48 hours for response.

Having trouble prying off your wiper arm? Prevent damaging your vehicles paint or the arm itself with this puller tool.

With ease in mind, this has many benefits over using a traditional pry bar. The handle is a sturdy plastic knob that allows you to get a solid grip when applying pressure. Low profile design allows you to get into tight areas with potentially damaging your paint or needing to pry against a weak surface. The rounded point allows you remove the wiper arm puller with little to no marks left behind on the wiper's shaft, linkage, or any other surfaces.
 

Features:

•  Will not damage wiper arm or hood cowling during removal
•  Simply place puller feet under wiper arm and tighten forcing screw against wiper shaft
• Easy adjustment with molded handle

The perfect kit containing most of your needed European essentials. 

Features:

• 13PCS-1/4" DR.6PT SOCKETS: 4, 4.5 , 5 ,5.5 ,6 , 7, 8 ,9 ,10, 11, 12, 13, 14MM 
• 1PC- 1/4" DR. QUICK RELEASE RATCHET (72T).
• 2PC- 1/4" DR.50 & 100MM EXTENSIONS 
• 1PC- 1/4" DR.150MM FLEXIBLE EXTENSION
• 1PC- 1/4" DR.UNIVERSAL JOINT
• 1PC- 1/4" DR.SLIDING T-BAR
• 1PC- 1/4" DR.6" SPINNER HANDLE
• 1PC- 1/4" DR.1/4" BIT HOLDER ADAPTER
• 4PCS-HEX KEY WRENCHES:1.27, 1.5,2,2.5MM
• 6PCS-1/4" HEX SOCKETS:3,4,5,6,7,8MM
• 3PCS-1/4' SLOTTED SOCKETS:4,5.5,7MM
• 3PCS-1/4" PHILIPS SOCKETS:PH1, PH2, PH3
• 3PCS-1/4"POZI SOCKETS: PZ1, PZ2, PZ3
• 6PCS-1/4" TORX SOCKETS: T10, T15, T20, T25, T30, T40

Own an E30? This tool kit is a perfect fit for your glovebox!

Gap Tool With Feeler Gauge is essential for precision when installing spark plugs. This versatile tool is designed for accurately gapping 12mm and 14mm spark plugs, ensuring optimal engine performance and reliability. Ideal for both professional mechanics and DIY enthusiasts, it simplifies the process of setting the correct spark plug gap.

• Versatile Use: Suitable for gapping both 12mm and 14mm spark plugs.
• Precision Measurement: Includes a feeler gauge for accurate gap settings.
• Universal Application: Ideal for various vehicle engines, making it a valuable addition to any toolkit.
• Enhanced Performance: Ensures proper spark plug gap for improved engine efficiency and performance.

Protecta socket are used to keep ugly scratch marks from showing up after torqueing down wheel lugs.

Features:

• Coated six-point deep-well impact sockets 
• Color coded mar-free exterior coatings that prevent nicks and scratches left by plain metal sockets
• 17mm, 19mm and 21mm Sockets included

Use these with your breaker bar or impact gun to remove the tightest wheel bolts and lug nuts: when reinstalling wheels, use them to final torque wheel fasteners to factory specifications.

Combine these with our torque limiting sockets and the Schwaben ½-inch torque wrench for a complete wheel fastener solution.

The Schwaben aluminum wheel hanger makes it easy to remove and install wheels. Just thread the hanger stud into a wheel bolt hole and hang the wheel safely while you rotate tires or remove them for service or vehicle repair. (It's also great for keeping wheel bolt holes aligned on cars with spacers.)

Features:

• Longer & Lighter
• Made of 6061-T6 aluminum
• Anodized for hardness and good looks
• Knurled, non-slip handle has a drilled hole so you can hang it on a pegboard hook in your garage