• 70MM, 80MM, OR 90MM OVERALL LENGTH
• OUR HIGHEST-GRADE PREMIUM WHEEL STUD
• DRY LUBE WITH BLACK M-PHOSPHATE COATING
• STUD FOR RACE/TRACK USE
• CORRECT SHOULDER SIZE FOR A WIDE RANGE OF HUBS/BRAKE ROTORS
• USE WITH 14x1.5 NUT
  
• For the very best in a race-grade wheel stud, stop looking! These are the wheel studs that our race teams insist on (after years of trying every stud design on the market). MSI Racing specializes in hardware for motorsport use (NASCAR and IMSA) and other advanced industries. We tried them on our Grand-Am/IMSA racecars and were very impressed by the performance and durability of their designs. Race wins and championships can come down to the seconds of a pitstop. We could run any wheel stud in the world and we use these. After testing them over the course of a few endurance seasons we decided to offer them to all of our customers as well.
  
  These studs are available in three overall lengths - 70.5mm, 80.5mm, and 90.5mm. All sizes are made with aircraft quality alloy steel and have roll formed threads for greater strength than cut threads. We use a dry film lubricant HM-30 coating containing Teflon & Moly over a manganese phosphate finish. Manganese is preferred over the more common zinc because it's better at reducing friction and wear to prevent thread galling. With the dry lube applied over the phosphate this is the best corrosion resistance we have seen in any wheel stud! Salt tests have shown this stud is superior to others in corrosion resistance. The dry lube helps the nut engage and glide over the threads for faster engagement without cross threading or binding. Other features of our MSI studs include a large bullet nose nut-starter and a properly sized shank to work with a wider range of BMW wheel, nut, and brake rotor combinations. We intentionally avoid the extra large shoulders you see on other studs because they can interfere with some brake rotor hats. The extra large shoulder can be too large to allow the rotor to pass through and drilling out the holes is required (not cool!) Our studs have the sufficient shank for the brake rotor without interfering.
  
  We configured these studs to have a 14x1.25 thread to go into the wheel hub. But the exposed stud has 14x1.5 threads. We did this because threading a nut is faster on 1.5 threads than a finer 1.25 thread pitch, which saved us time during pitstops. There are also more wheel nut options in 14x1.5. When you order our 14x1.25 studs make sure you also order the 14x1.5 nuts.
   

  FREE red threadlocker with purchase of a full set of wheel studs (16 or more)MSI Dry Lube Bullet Nose Wheel Stud Features:
  

• Dry film lubricant HM-30 coating containing Teflon & Moly over a manganese phosphate finish
• Innovative nut-starter and bullet shape radius that all but eliminates cross-threading
• Properly sized shank to work with a wide range of brake rotor, wheel, and nut combinations
• Heat-treated aircraft quality alloy steel
• Developed from over 20 years of top level NASCAR use
  
• These studs are installed using the traditional 'double-nut' method (one regular nut and one jam nut) with thread locking compound (Red Turbo-Lock or similar).
  
  Sold per stud.
  Wheel nuts sold separately.

Upgrade your BMW's wheel bolts with ECS Titanium Wheel Bolts for superior performance and durability. These bolts are 50% lighter than steel bolts, reducing rotational mass and enhancing vehicle agility. CNC'd from annealed titanium alloy, they meet class 10.9 fastener proof load requirements without signs of fatigue or failure. With precise specifications and a conical seat design, they ensure a perfect fit and optimal performance for your BMW.

• 50% lighter than steel bolts, reducing rotational mass
• CNC'd from annealed titanium alloy for durability
• Conical seat design for perfect fitment
• Resistant to rust and corrosion for long-term reliability

Unsure of what size spacer will work best for you? This professional kit includes 1mm, 2.5mm, 5mm, 10mm, and 15mm spacers with wheel studs and nuts for you play with. These are not the same spacers that we sell and they cannot be used to drive on. But with the studs installed the car can be lowered to the ground and rolled to check for clearances. These test fit spacers are drilled to fit the standard BMW 5x120 bolt pattern as well as 4-lug 4x100 (and VW/Audi bolt patterns too). You can stack spacers to achieve the perfect clearance. When you're ready call us to order the spacers you need (we make 3mm, 5mm, 7.5mm, 10mm, 12.5mm, 15mm, 17.5mm, 20mm, 25mm, and 30mm spacer thicknesses).

This kit is for purchase only. It's perfect for shops or racecars where changing wheels or brakes is common. We also have kits that are available for rent.

These spacers are not for driving on. They lack the hubcentric lip that BMW wheels are designed to work with. Driving on studs alone will lead to a failure.

ECS Tuning's conical seat wheel bolts adhere to some of the most stringent testing and safety standards, and also feature a corrosion resistant black zinc coating for longevity and a change of style. The conical seat of the bolt was designed for compatibility with most aftermarket and OE MINI wheels, to ensure your wheels are safely secured. Make sure your wheels are fastened correctly with Black Conical Seat Wheel Bolts from ECS Tuning.

• Compliant with stringent testing and safety standards
• Corrosion-resistant black zinc coating for longevity and style
• Compatible with most aftermarket and OE MINI wheels
• Set of 20 bolts for replacing factory wheel bolts

Stock size for MINI, great for replacing all the wheel bolts with new for a clean look.

This is a set of 20 to replace your factory wheel bolts to black zinc coated. 14x1.25x27mm

Bolt specifications:

• Diameter - 14mm
• Thread Pitch - 1.25mm
• Length - 27mm

For performance-driven enthusiasts seeking lightweight and high-quality wheel bolts, ECS Titanium Wheel Bolts are the ideal choice. These bolts are 50% lighter than steel equivalents, reducing rotational mass on the vehicle. Precision CNC'd from annealed titanium alloy, these bolts meet class 10.9 fastener proof load requirements without signs of fatigue or failure.

Benefits:

• 50% lighter than steel bolts, reducing rotational mass
• CNC'd from annealed titanium alloy for superior strength
• Full set of 20 for comprehensive wheel bolt replacement
• Diameter: 14mm, Thread Pitch: 1.25mm, Length: 27mm, Head: 17mm, Seat: Conical Seat
• Ensure thorough cleaning of hub threads before installation to prevent potential fatigue or cracking due to leftover zinc from previous bolts
• Note: When using wheel spacers, calculate the required bolt length by adding spacer size to OE bolt length for proper fitment (e.g., 26mm OE Wheel Bolt + 15mm Wheel Spacer = 41mm Length Bolt)

ECS Tuning lab tests its fasteners to ensure they meet all 10.9 specifications.

Wheel Bolt specs:

• Diameter - 14mm
• Thread Pitch - 1.25mm
• Length - 50mm

If installing wheel spacers, measure your current wheel bolt's length and add the width of your spacer to determine correct extended bolt length. 

Used on a wide variety of both BMW and MINI wheels. Best to replace whenever new tires are being installed.

Genuine BMW Rubber Valve - L=42,5Mm
This item fits the following BMW Chassis:
E30 M3,E36 M3,E34 M5,E60 M5,E63 M6,E46 M3,E70 X5M,E71 X6M,E82 1M Coupe,E85 Z4M,E53 48IS,E30,E34,E36,E38,E39,E46,E53 X5,E63,E65,E70 X5,E71 X6,E82,E83 X3,E85 Z4,E86 Z4,E89 Z4,E90,E92,E93,F01,F02,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4 X4,F30,F31,F32,F33,F34,F36,F80 M3,F82 M4,F83,i3i12
 

Upgrade your BMW's wheel setup with ECS Tuning's Extended Wheel Bolts. Available individually or with matched spacers for easy fitment, these bolts meet strict ISO 898 class 10.9 standards for mechanical and physical properties. Lab-tested to ensure compliance, they offer reliable and durable performance. The 14mm diameter, 1.25mm thread pitch, and 43mm length make these bolts ideal for various applications, providing a secure fit for your wheels.

• Extended wheel bolts for BMW
• Available individually or with matched spacers
• Meets ISO 898 class 10.9 standards
• Lab-tested for compliance and reliability
• 14mm diameter, 1.25mm thread pitch, 43mm length
• Ideal for wheel spacer applications