BMW Intake Parts for BMW 2 Series F22 (2014+)

We are proud to present you with our long-awaited Turner Motorsport Carbon Fiber N55 Intakes. Like all of our Turner Motorsport products, our N55 intake was CAD Designed in-house to give you the best performing, most beautiful intake we could possibly imagine for your N55 powered BMW. The best part? Our design seamlessly integrates with OEM ducting and stock mounting locations to give you a simple install and an OEM+ fit and finish. We believe this is the way the N55 engine bays should have come from the factory. It’s time to ditch all that plastic.

Our higher flow filter and intake design gave our F30 335i an additional 7 WHP and 14 ft-lbs of torque over stock when we tested on our dyno. Our less restrictive intake design reduced post filter pressure by 0.2 psi over stock, allowing for gains across the entire RPM range - this reduced pressure drop also results in less stress on your N55’s turbo. Our enclosed intake also lowers your intake temperatures by 13 degrees over running an open intake.

We offer our N55 carbon intake in either gloss or matte finish, so you can choose what best suits your engine bay. Select either gloss or matte finish below, and then please select whether or not you are purchasing an intake for a manual transmission vehicle. If your vehicle has a manual transmission, it will require BMW Part # 13907515387.

If you are looking for our Turner Motorsport Open Carbon Intake, see T#568168

Download PDF Installation Instructions

Key Features & Benefits:

2x2 twill weave carbon fiber, clear coated for UV protection

Wrinkle Black Powder Coated heat shield

Ovaled Intake tube for OEM quality fitment

High flow cleanable Turner Motorsport air filter

+7 WHP / +14 lb-ft of torque!

Lowers intake temperatures by 13 degrees over running an open intake.

Special care instructions:

If clear coat gets scratched, reseal affected area with clear coat touch up

To retain UV resistance and protect finish, wax with high quality carnuba wax

Our N55 Carbon Intake fits the following BMWs:
2014 - 2016 F22 M235i, M235i xDrive
2012 - 2015 F30 335i, 335i xDrive
2012 - 2015 F32 435i, 435i xDrive

Want more in-depth details? We’ve got you covered below:

Carbon Fiber Intake Lid:

2x2 twill weave carbon fiber, protected by a clear coat for UV protection

Reduces intake temperatures by 13 degrees compared to running an open intake

Carbon Fiber Intake Tube:

2x2 twill weave carbon fiber, protected by a clear coat for UV protection

Ovaled intake tube design allowing

MAF scaling matches factory intake

MAF sensor flange machined from 6061-T6, black anodized and bonded to the intake tube directly in the center of the tube for accurate temp/airflow reading

Vacuum line port machined from 6061-T6, black andozed and bonded to intake tube

Integrated carbon flange allows secure mounting of intake tube to our heat shield

Heat shield:

One piece design manufactured from 12 gauge 5052 aluminum

Wrinkle black powder coated

Supplied gold heat shield tape

High Flow Air Filter:

Conical high flow cleanable air filer

8 ply oiled cotton gauze

Bellmouth filter flange inlet reduces turbulence and maximizes flow

Bring your aFe filter back to life with a Restore kit from aFe. Included is filter cleaner & replacement oil. These air filter oils is designed to not harm MAF sensors, while allowing the filter to catch as much debris as possible.

Used for Pro 5 R filters

Engines make more power when you're able to move as much air and fuel as possible through them. However, air density is just as important as air volume. Cooler air is denser air, so in addition to keeping your engine cool, it's important to make sure that your intake charge is as cool as possible. Turner Motorsport's upgraded intercooler works to reduce air temperatures with a bare minimum of pressure drop. Less pressure drop means less restriction, and a turbocharger that doesn't have to work as hard. This results not only in a longer service life for your turbocharger, but a substantial increase in performance as well.

The stepped design increases volume and surface are in a limited space by adding an additional smaller core at the top of the intercooler. Both cross sectional area and frontal surface area are increased by a whopping 56%, with a design that still weighs under 20 pounds. On the stock intercooler, the temperature differential between the inlet and outlet sides of the intercooler represented a 95 degree drop. With the Turner Motorsport intercooler, that drop was increased to a chilling 140 degrees. The dyno results don't lie: as a bolt-in upgrade, expect gains of 18 wheel horsepower and 10 lb/ft of torque. With a tune and supporting modifications, further gains are possible, up to 36 horsepower and 28 lb/ft of torque.

This cast aluminum intercooler features an attractive, easy to clean matte black finish, with etched Turner logos on the front and bottom. If you're looking for the ultimate cooling system upgrade for your turbo BMW, look no further.

• Cast aluminum construction
• Bar and plate design
• 56% increase in frontal surface area & cross sectional area
• Decrease in temperature of 45 degrees from inlet side to outlet side (95 degree drop stock on outlet side vs. 140 degree drop on Turner outlet side)
• Significantly less restriction (pressure drop of consistently 0.75 psi vs. 1.5-2.5 psi stock)
• +18HP/10TQ (+36HP/28TQ with tune and supporting mods)
• Weighs under 20 lbs.
• Overall size: 520mm wide, 210mm tall
• Mounting hardware inlcuded

Upgrade to the following OE Intercoolers: 17517600531, 17517600530, 17517618809

Fits the Following BMWs:

F22 F23 228i 228i M235i M235ix

F30 F31 F32 F33 F34 F36 328i 328ix 335i 335ix 428i 428ix 435i 435ix

The Turbosmart BOV Kompact EM Dual Port - BMW N20/N26 (VR23) offers an advanced blow-off valve solution designed specifically for BMW’s N20 and N26 engines. Engineered with premium materials, this bolt-on unit provides an ideal balance of performance and durability. By improving turbo response and boosting control, it maximizes power efficiency and prevents compressor surge, enhancing the life of your turbocharger system. Turner Motorsport offers this product as a direct replacement with easy installation and seamless compatibility for BMW enthusiasts looking to optimize performance.

• Dual Port Venting: Allows for a combination of recirculation and vent-to-atmosphere options, enhancing flexibility.
• Compact Design: Precision-engineered to fit neatly into tight engine bays while delivering maximum efficiency.
• Plug-and-Play Installation: Designed as a direct OEM replacement, making installation straightforward.
• Improved Throttle Response: Reduces lag and improves acceleration, creating a smoother driving experience.
• Quality Construction: Made from high-grade aluminum alloy for durability and performance.

Upgrade your BMW’s turbo system with the Turbosmart BOV Kompact EM Dual Port, the trusted solution for performance enthusiasts.

Bespoke. A word that perfectly encapsulates the mindset of Eventuri. Performance parts with an obsessive attention to detail and an unyielding dedication to quality. Perfectly designed to maximize the potential of each individual vehicle and meticulously refined through rigorous testing. Eventuri offers a product that stands in a class of its own and delivers outstanding power increases without making false claims or exaggerating dyno numbers. With patented designs such as a custom velocity stack filter housing and improved ducting that guides the flow of air into the engine, to the breathtaking uniformity of the weave pattern. These are performance products for the truly discerning customer.

When it comes to styling a vehicle the proper look is one that compliments, not cheapens the inherent design. Race inspired carbon fiber completes the look and style of every BMW M-powered model and Eventuri delivers on an entirely new level. Instead of simply offering black carbon and yellow kevlar that has become the norm, Eventuri has stepped things up by offering their carbon/kevlar accessories in multiple colors. Now you can choose between Blue, Red, Orange and Yellow weave to further set your ride apart from the pack.

Performance Increase : 12-15hp, 14-18ft-lb

The B58 Eventuri intake system is another example of a “Complete System” principal. It demonstrates the perfect balance between allowing for unrestricted airflow with our open filter housing whilst maintaining low IAT by cold air saturation with our scoop and shield combination. Every detail has been meticulously developed from the prepreg carbon pieces to the double layer heat shields. This intake sets a new benchmark in design and craftsmanship for the B58 platform.

The B58 Eventuri system uses a Patent Pending Carbon fiber Housing which provides an aerodynamically efficient airflow path from the filter to the turbo. Not just another cone filter with a heat shield but a unique design which invokes the Venturi affect and maintains laminar flow conditions to reduce the drag on the turbo.

The filter housing comprises of a high flow filter, aluminium cowl, laser cut bracket, carbon heat shroud and the carbon pod itself, which extends to incorporate the MAF sensor and turbo tube. The carbon pod shrouds the reverse mounted filter and smoothly shapes the airflow down to the integrated MAF intake tube. This smooth reduction in cross sectional area invokes the Venturi effect where the airflow accelerates whilst maintaining laminar conditions. It can be thought of as a large velocity stack. The carbon filter housing and the inlet tube have been integrated to be one continuous piece. This reduces the number of internal interfaces and allows for smoother airflow to the turbo. The diameter of the tube smoothly transitions from the required diameter at the MAF sensor end to the larger diameter of the turbo inlet.

A lot of attention was placed on the heat shielding since the intake is located next to the exhaust manifold. For this Eventuri used a double layer main shield with a silver finish on the exhaust side and black on the intake side. The silver layer reflects radiant heat from the exhaust and the black layer absorbs and radiant heat on the inlet side. The air gap between the two layers acts as an insulator to stop the conductive heat spreading to the inner layer. 

Each intake system includes:

• Prepreg Carbon Filter Housing and integrated MAF tube
• High Flow Double Cone Air Filter
• Aluminium Cowl for smooth airflow entry
• Prepreg Carbon Scoop
• Prepreg Carbon filter shroud
• CNC Machined MAF Boss
• Double layer main heat shield
• Double layer secondary shield
• Laser Cut Mounting Brackets

This kit fits the following BMWs:
2014+ F22 M240i

Turbosmart GenV Raceport BOV (Fits competitors 50mm / female style flange. No weld flange included)

The Race Port is renowned for its exceptional compactness and lightweight design tailored for turbocharged competition-level engines. With its innovative collar design and internal flow structures, this BOV stands out as 50% lighter and 25% smaller than competing models, yet it boasts an impressive flow rate of 330 CFM, making it the market's top-performing BOV in its category.

Fits Chargepipes With Tial/Turbosmart Flange

Turbosmart GenV Raceport BOV (Fits competitors 50mm / female style flange. No weld flange included)

The Race Port is renowned for its exceptional compactness and lightweight design tailored for turbocharged competition-level engines. With its innovative collar design and internal flow structures, this BOV stands out as 50% lighter and 25% smaller than competing models, yet it boasts an impressive flow rate of 330 CFM, making it the market's top-performing BOV in its category.

Fits Chargepipes With Tial/Turbosmart Flange

Bespoke. A word that perfectly encapsulates the mindset of Eventuri. Performance parts with an obsessive attention to detail and an unyielding dedication to quality. Perfectly designed to maximize the potential of each individual vehicle and meticulously refined through rigorous testing. Eventuri offers a product that stands in a class of its own and delivers outstanding power increases without making false claims or exaggerating dyno numbers. With patented designs such as a custom velocity stack filter housing and improved ducting that guides the flow of air into the engine, to the breathtaking uniformity of the weave pattern. These are performance products for the truly discerning customer.

When it comes to styling a vehicle the proper look is one that compliments, not cheapens the inherent design. Race inspired carbon fiber completes the look and style of every BMW M-powered model and Eventuri delivers on an entirely new level. Instead of simply offering black carbon and yellow kevlar that has become the norm, Eventuri has stepped things up by offering their carbon/kevlar accessories in multiple colors. Now you can choose between Blue, Red, Orange and Yellow weave to further set your ride apart from the pack.

This is a high flow replacement filter. It installs the same as your factory filter but allows the same flow through a similar media as all the the intake kits offered by Eventuri.

This part fits the following vehicles:
2012+ F20 M135i 
2014+ F22 M235i 
2016+ F87 M2

This is a drop-in stock replacement aFe performance air filter that installs into your BMW's factory airbox. This version used aFe's highest flowing filter media, which uses a lightly oil gauze to filter out dirt and particulates, while allowing more air to flow to the intake. We also carry this filter in the "ProDry" grey filter media, which is oil-free for only slightly less performance and no maintenance.

Fits in vehicles with the following engines: B46 2.0L, B58 3.0L

Perfect Fit:
Includes stainless steel clamps for a leak-free seal and heavy-duty 5-Ply reinforced silicone coupling for strength.

Mandrel-bent Tubing:
Constructed of 2-1/2" to 2-3/4" mandrel-bent aluminum tubing and powder-coated textured-red for heat and corrosion resistance. The smooth transition mandrel bends decrease turbulence which increases horsepower and torque. The high-temp wrinkle-black powder-coating insulates the tube from engine heat and protects the tube from corrosion.

aFe Badging:
Unique aluminum laser-cut aFe Power logo plate is welded-on for an aggressive style.

Also Fits:
2014-2016 BMW 128i/ix (F20/21) L4-2.0L (t) N20
2014-2016 BMW 228i/ix/220i (F22/23) 14-16 L4-2.0L (t) N20
2013-2016 BMW 320i/ix (F30/31/34) L4-2.0L (turbo) N20
2012-2016 BMW 328ix (F30) L4-2.0L (turbo) N20
2013-2016 BMW 328i/ix (F31/34) L4-2.0L (turbo) N20
2014-2016 BMW 420i/ix (F32/33) L4-2.0L (turbo) N20
2014-2016 BMW 428i/ix (F32/33/36) L4-2.0L (turbo) N20

Note: This intercooler tube is not CARB exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicle.

Bespoke. A word that perfectly encapsulates the mindset of Eventuri. Performance parts with an obsessive attention to detail and an unyielding dedication to quality. Perfectly designed to maximize the potential of each individual vehicle and meticulously refined through rigorous testing. Eventuri offers a product that stands in a class of its own and delivers outstanding power increases without making false claims or exaggerating dyno numbers. With patented designs such as a custom velocity stack filter housing and improved ducting that guides the flow of air into the engine, to the breathtaking uniformity of the weave pattern. These are performance products for the truly discerning customer.

When it comes to styling a vehicle the proper look is one that compliments, not cheapens the inherent design. Race inspired carbon fiber completes the look and style of every BMW M-powered model and Eventuri delivers on an entirely new level. Instead of simply offering black carbon and yellow kevlar that has become the norm, Eventuri has stepped things up by offering their carbon/kevlar accessories in multiple colors. Now you can choose between Blue, Red, Orange and Yellow weave to further set your ride apart from the pack.

The N55 intake system is a perfect example of Eventuri's “Complete System” principal. It demonstrates the perfect balance between allowing for unrestricted airflow with an open filter housing and cold air saturation with proprietary scoop and duct combination. Every detail has been meticulously developed from the prepreg carbon pieces to the precision bracket work. This intake sets a new benchmark in design and craftsmanship for the N55 platform. 

The Eventuri system uses a Patent Pending Carbon fibre Housing which provides an aerodynamically efficient airflow path from the filter to the MAF tube. Not just another cone filter with a heat shield but a unique design which invokes the Venturi affect.

The filter housing comprises of a high flow filter, aluminium cowl, laser cut bracket and the carbon pod itself. The carbon pod shrouds the reverse mounted filter and smoothly shapes the airflow down to the intake tube. This smooth reduction in cross sectional area invokes the Venturi effect where the airflow accelerates whilst maintaining laminar conditions. It can be thought of as a large velocity stack.

Each intake system includes:

• Prepreg Carbon Fiber Venturi Housing
• High Flow Double Cone Air Filter
• Aluminium Cowl for smooth airflow entry
• Prepreg Carbon Fibre Intake Tube with integrated MAF Sensor Mount
• Prepeg carbon Fibre Air Scoop
• Laser Cut Intake Duct
• Laser Cut Stainless Steel Brackets
• High quality Silicone couplers with BMW specification hose clamps

7" Tall Air Filter:
This intake system utilizes an oil-free, 7" tall conical 360-degree radial flow performance air filter with 5-layers of progressive finer mesh cotton media providing maximum airflow and performance.

High-Quality Tube:
This system uses a high quality, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit.

Black Cover w/ Auxiliary Air Inlet:
This carbon fiber look cover is constructed with lightweight vacuumed formed ABS plastic for underhood appearance. A urethane plug is also included if you wish to block off the auxiliary air inlet.

Hassle-Free Installation:
All clamps, coupling and hardware are included for hassle-free installation. This is a direct bolt-on kit that requires no cutting or drilling on factory parts.

Note 1:
Does NOT fit Convertible models.

Note 2:
This product is not currently CARB exempt and is not available for sale in California or for use on any vehicle registered with the California Department of Motor Vehicle.

7" Tall Air Filter:
This intake system utilizes an oil free, 7" tall conical 360 degree radial flow performance air filter with 5-layers of progressive finer mesh cotton media providing maximum airflow and performance.

High Quality Tube:
This system uses a high quality, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit.

Carbon Fiber Look Cover w/ Auxiliary Air Inlet:
This carbon fiber look cover is constructed with lightweight vacuumed formed ABS plastic for underhood appearance. A urethane plug is also included if you wish to block off the auxiliary air inlet.

Hassle-Free Installation:
All clamps, coupling and hardware are included for hassle-free installation. This is a direct bolt-on kit that requires no cutting or drilling on factory parts.

Note 1:
Does NOT fit Convertible models.

Note 2:
This product is not currently CARB exempt and is not available for sale in California or for use on any vehicle registered with the California Department of Motor Vehicle.