BMW Engine Parts for BMW X Series F26 (2015+)

The Schwaben Piston Ring Filer is a vital tool for obtaining the precise end gap necessary for optimal piston ring performance.

This filer allows you to swiftly and accurately file piston rings to exact measurements, enhancing your engine’s efficiency and lifespan. By simply positioning the piston ring and turning the handle, you can easily rotate the abrasive wheel for a smooth and effective filing process.

**Note:** For the Schwaben Universal Piston Ring Compressor, check out T25805755!

Key Features:

• Optimize Performance: Achieve the perfect end gap crucial for top engine efficiency.
• Quick and Precise: File rings to exact specifications with ease.
• Easy Operation: Position the piston ring and turn the handle to effortlessly rotate the abrasive wheel.
• Enhanced Engine Longevity: Accurate end gaps contribute to longer engine life and better performance.

Instructions:

1. Position the Ring: Place the piston ring on the outer edge against the stop and align the ends squarely against the grinding wheel. Apply light, even pressure against the wheel to prevent grinding too large a gap.
2. Operate the Tool: Turn the handle so the grinding wheel turns towards the inside edge of the ring (counter-clockwise when viewed from the handle side of the tool).
3. Exercise Caution: This is a diamond grinding wheel. It cuts fast!

Checking Piston Ring Gap:

1. Deburr the Ring Ends: Carefully remove any burrs on the ring ends before placing the ring in the bore. A light touch with a fine abrasive stone works well.
2. Clean the Rings: Thoroughly clean the rings with lacquer thinner or acetone, as the paint coating from the factory may occasionally scratch the cylinder bore. Always wear gloves during this process.
3. Position the Ring in the Cylinder: Place the ring squarely in the cylinder bore, about 1" down from the deck surface. An upside-down flat-top piston will help you properly square the ring.
4. Measure the End Gap: Use a feeler gauge to measure the ring's end gap. Apply light grinding pressure and check frequently to avoid making the end gap too large.

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

Featuring a T60 Torx head, the belt tensioner found on the N54/N55 engine has exceptionally tight quarters. Use of this tool will allow access to the lock pin hole without excessive component removal, making belt removal and installation a much easier task.

This tool fits all N54/N55 powered BMW, including: 
2008+ E82 BMW 135i 1M Coupe 
2014+ F22 BMW M235i 
2006+ E90 BMW 335i 335xi 335i xDrive - Sedan 
2007+ E92 BMW 335i 335is 335xi 335i xDrive - Coupe 
2007+ E93 BMW 335i - Convertible 
2012+ F30 BMW 335i 335i xDrive - Sedan 
2013+ F32 BMW 435i 435i xDrive - Coupe 
2014+ F34 BMW 335i xDrive GT - Gran Tourismo 
2015+ F80 BMW M3 - Sedan 
2015+ F82 BMW M4 - Coupe 
2015+ F83 BMW M4 - Convertible 
2006-2010 E60 BMW 535i 535xi 535i xDrive 
2010+ F07 BMW 535i GT, 535i xDrive GT 
2011+ F10 BMW 535i 535i xDrive 
2012+ F13 BMW 640i 
2009+ F01 BMW 740i 740li 
2011+ F25 BMW X3 xDrive35i 
2007-2013 E70 BMW X5 xDrive35i 
2007-2014 E71 BMW X6 xDrive35i 
2009+ Z4 BMW Z4 sDrive35i Z4 sDrive35is 

Often an oversight in maintenance, ignition components are also susceptible to wear and tear. Spark Plugs can accumulate carbon, reducing the spark intensity and it's ability to properly ignite the air/fuel mixture, leading to misfires and generally declining performance. Other ignition components, such as coils, boots, wires, caps, and rotors, can also wear out over time due to factors like heat and contamination, preventing the current from reaching the spark plug.

To start over fresh with all new components, we now offer these Ignition Service Kits. Each kit comes with brand new OE quality components, replacing any potential fault points in your ignition system for peak performance!

See kit contents below for a complete list of included components.

Looking to update your old torque wrenches? The Schwaben 3/8" Drive Digital Torque Wrench is your answer. 

This digital torque wrench uses an easy-to-read display to show torque amounts and settings, features a push button release, reversible 3/8" drive, 45 tooth ratchet head, and a comfortable no-slip grip and adjustment wheel.

Specifications:

• Setting Range: 45-220 ft lbs (60-300 Nm)
• Display Units: ft-lbs, N-m, Inch-lbs, cm-kg2, and m-kg
• Size: 22" (550mm) length for easy leverage
• Accuracy: +- 3%
• Include blow molded holding case
• Requires one 3V CR2030 battery (included)

Meet modern emission regulations while preserving engine performance with the ECS Baffled Oil Catch Can. Designed for BMW and MINI vehicles, this system efficiently captures blow-by gases, preventing excessive oil vapor ingestion into the intake tract. The innovative 4-chamber baffle system maximizes oil/air separation, reducing carbon build-up and pollutants. Featuring a 1/4" drain fitting for easy maintenance, this catch can minimizes oil deposits, ensuring cleaner emissions and enhanced engine performance.

Key Benefits:

• Efficient 4-chamber baffle system for maximum oil/air separation
• Recirculated design reduces oil ingestion, promoting cleaner emissions
• Durable 6061-T6 billet machined body with anodized black finish for longevity
• Integrated dipstick and sealed reservoir for easy oil inspection and maintenance
• Serviceable design with removable baffle plates for cleaning
• Easy installation with customizable mounting options and leak-free fittings
• Engineered and manufactured in the USA for superior performance and durability

Note: Not for sale or use in the state of California on any pollution-controlled vehicle as per the California Air Resources Board.

Achieve flawless camshaft alignment on your BMW N20 and N26 engines with the Schwaben N20/N26 Timing Tool Kit. Designed to precisely align camshaft timing at the TDC position and lock the VANOS system for accurate sprocket installation, this tool set is a must-have for any timing job.

Securely stored in a durable blow-molded case, this kit is both easy to store and transport. The Schwaben N20/N26 Timing Tool Kit is a crucial addition to any professional or DIY mechanic's toolkit, ensuring the precision and dependability required for peak engine performance.

Additionally, our LIFETIME REPLACEMENT program guarantees that we will take care of any issues you may encounter with the set, so you can focus on the task at hand!

Includes:

• Camshaft Locking Tool
• Camshaft Fixating Base
• T.D.C. Alignment Pin (83300495070)
• Chain Tensioner
• M6 x P1.0 L: 130mm
• M6 x P1.0 L: 60mm
• M6 x P1.0 L: 45mm (Quantity: 2)

Other Tools Needed:

• BMW Flex Plate Lock Tool (We Suggest: T584148 - CTA N20/N26 Flywheel Holder)
• Oil Pump Lock Kit (If removing oil pump) (We Suggest: T586212 - CTA Oil Seal Repair Kit)
• 8mm Socket/Wrench (We Suggest: T363185 - Combo Wrench Set)
• 10mm Socket/Wrench (We Suggest: T363185 - Combo Wrench Set)
• 13mm Socket/Wrench (We Suggest: T363185 - Combo Wrench Set)
• 14mm Socket/Wrench (We Suggest: T363185 - Combo Wrench Set)
• 16mm Socket/Wrench (We Suggest: T363185 - Combo Wrench Set)
• 17mm Socket/Wrench (We Suggest: T363185 - Combo Wrench Set)
• 22mm Socket/Wrench (We Suggest: T21209842 - 1/2" Dr. Socket Set)
• 24mm Socket/Wrench (We Suggest: T21209842 - 1/2" Dr. Socket Set)
• 27mm Socket/Wrench (We Suggest: T361018 - 1/2" Dr. 27mm Socket)
• E6 Socket (We Suggest: T363279 - E Torx Socket Set)
• E7 Socket (We Suggest: T363279 - E Torx Socket Set)
• E8 Socket (We Suggest: T363279 - E Torx Socket Set)
• E10 Socket (We Suggest: T363279 - E Torx Socket Set)
• E20 Socket (We Suggest: T363279 - E Torx Socket Set)
• T30 Socket (We Suggest: T386445 - Torx Socket Set)
• T40 Socket (We Suggest: T386445 - Torx Socket Set)
• T45 Socket (We Suggest: T386445 - Torx Socket Set)
• 5mm Hex Socket (We Suggest: T21209844 - 1/4" Dr. Socket Set)
• 8mm Hex Socket (We Suggest: T21209844 - 1/4" Dr. Socket Set)

Replaces BMW OEM Tools:

• 83302212831
• 83302212830
• 83302219548
• 83300495070
• 1197340

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

Includes connector housing with terminals and seals. Commonly used for the pencil-style ignition coil connector.

ECS Tuning replacement harness connectors include all necessary pins and wire seals for a complete harness repair. Whether you have a broken harness connector or need a complete wiring repair, we have the components you need.

Each connector includes an additional terminal in case one becomes lost or damaged during installation.

*OEM cross reference PN# 12527519996 - Commonly used for the pencil-style ignition coil connector.

Please reference the original part number from the existing connector to confirm fitment, before ordering.

Suggested tools:

Suggested crimping pliers: T#387193
Wire De-pin tools:
12pc De-Pin Tool Set - T#386379
23pc De-Pin Tool Set - T#641943

Discover ECS Tuning's stainless steel hose clamps, designed to simplify your Mini's maintenance tasks. No more waiting for dealership orders or overpaying!

These clamps offer versatility with various band widths and German-style T-bolts for size adjustment, ensuring they meet your required diameter. Say goodbye to dealer pricing while securing top-notch quality synonymous with ECS Tuning.

• Stainless steel construction for durability
• Versatile band widths for various applications
• German-style T-bolts for size adjustment
• High-quality alternative to dealership hose clamps

Battery Terminal brush uses the external brush to clean the cable clamps and the internal brush to clean the battery posts. Made from high Impact plastic body to eliminate tool corrosion.

Keeping the connection clean is an important part of making sure your battery is transferring the proper voltage during startup.

Ensure secure hose connections with the 1/2"/12mm Band Hose Clamp. This versatile clamp provides a tight and reliable seal for various hose sizes, making it ideal for automotive, plumbing, and industrial applications. With its durable construction and easy installation, the 1/2"/12mm Band Hose Clamp is a practical solution for preventing leaks and maintaining efficiency.

• Provides a tight and reliable seal
• Versatile clamp for various hose sizes
• Suitable for automotive, plumbing, and industrial applications
• Durable construction ensures long-lasting use

Schwaben Performance Work Gloves provide exceptional hand protection with a perfect balance of durability and comfort.

These gloves are designed for precision and offer high dexterity, making it easy to handle even the smallest automotive components. The tailored elastic cuff with a hook-and-loop closure ensures a secure and comfortable fit.

The textured latex coating on the palm and fingertips delivers superior grip and tactile feedback, while the breathable spandex backing and knit top allow for all-day comfort.

The durable synthetic leather palm enhances longevity, and the unique graphic design reflects the drifting culture of Euro car enthusiasts.

Key Features:

High Dexterity: Perfect for picking up small parts with ease. Secure Fit: Tailored elastic cuff with a hook-and-loop closure. Enhanced Grip: Textured latex coating on palm and fingertips. All-Day Comfort: Breathable spandex backing and knit top. Durable Design: Synthetic leather palm for extended wear. Unique Style: Graphic design inspired by the drifting culture of Euro owners.

Check which size you need here!

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.