BMW 4 Series F32 (2014+)

Clear BMW chassis

Please ensure your correct model is selected

Sub-Categories

Sort By:

Liqui Moly MolyGen 5W-40 Oil Change Kit / Inspection I w/ UV Flashlig...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:5376276
Part#: 11427953129TKT
In Stock
Sale - Save 15% $ 115.99

This product was last offered at the strikethrough price on
05-15-2026

$ 98.57 USD
Free Shipping
Sale - Save 15%
$ 115.99

This product was last offered at the strikethrough price on
05-15-2026

$ 98.57 USD
Free Shipping
This new generation oil is made with a quality synthetic base and includes a molecular friction modifier for reduced friction and wear. It also glows under UV light so leaks can be easily traced! This unique oil contains a fluorescent green chemical friction modifier to smooth out hard metal surfaces, reducing overall engine wear and heat due to friction. Tests have shown a reduction in friction coefficient of as much as 15%! MolyGen oil is also a great choice for modern turbocharged engines which produce much more heat. This kit from Turner Motorsport contains all that you will need to do your regular service on your vehicle. The kit contains: Seven Quarts of Liqui Moly MolyGen Engine Oil Oil Filter Kit New Drain Plug with Crush Washer UV Flashlight Make your next service a quality one with this new kit from Turner Motorsport
Show More Show Less
Automatic Transmission Service Kit
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
For GA8HP70Z or GA8HP45Z automatic transmissions
Packaged by Turner - Corporate Logo
T#:5389733
Part#: 24118612901TMSKT
In Stock
Sale - Save 23% $ 215.99

This product was last offered at the strikethrough price on
05-03-2026

$ 165.93 USD
Free Shipping
Sale - Save 23%
$ 215.99

This product was last offered at the strikethrough price on
05-03-2026

$ 165.93 USD
Free Shipping
Over the life of a vehicle, the transmission can often be overlooked when performing routine maintenance. If left unserviced, the automatic transmission fluid will break down, causing the valve body and filter to become contaminated with deposits and sludge. This will lead to poor shifting, slipping, and ultimately, transmission failure. Kit Includes: Automatic transmission filter with associated hardware Oil pan gasket Drain plug with sealing washer Fill plug with sealing washer 7 Liters of Liqui Moly Top Tec ATF 1800 Turner Motorsport recommends performing a full service on your automatic transmission every 60,000 miles
Show More Show Less
Valvetronic Actuator Replacement Kit - BMW N55 S55 3.0L
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:599759
Part#: 11377603979KT2
In Stock
Sale - Save 10% $ 268.99

This product was last offered at the strikethrough price on
05-03-2026

$ 241.95 USD
Free Shipping
Sale - Save 10%
$ 268.99

This product was last offered at the strikethrough price on
05-03-2026

$ 241.95 USD
Free Shipping
Includes actuator, actuator gasket and valve cover gaskets

Liqui Moly Special Tec B 5W-30 Oil Change Kit - B58 3.0L
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:23847536
Part#: LMSPC5W30KT
In Stock
$ 106.53 USD
Free Shipping on orders $49 and up

Maintain your driving machine's optimal performance with regular maintenance. BMW's recommended oil change intervals vary depending on driving habits. For enhanced performance, an oil change every 5,000 miles is advised for aggressive or city driving, while a maximum of 10,000 miles is recommended otherwise.

This comprehensive kit includes:

  • 7L Special Tec B 5W-30 Motor Oil
  • Engine Oil Filter with o-ring
  • Oil Drain Plug with o-ring

Ensure your BMW operates flawlessly with this premium service kit from Turner Motorsport.

Show More Show Less

B58 Liqui Moly Top Tec 6600 0W-20 Oil Change Kit
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:22130458
Part#: LMTPTCHOILCHNGKT
In Stock
$ 102.26 USD
Free Shipping on orders $49 and up
Ensuring your vehicle's peak performance relies on consistent maintenance. BMW's recommended oil change interval varies according to your driving habits. For optimal results, we advise changing the oil every 10,000 miles. However, for more aggressive or city driving, a 5,000-mile oil service interval is the preferred choice. This comprehensive kit includes: 7L of Top Tec 6600 0W-20 Motor Oil Engine Oil Filter with an o-ring Oil Drain Plug with an o-ring Maintain the flawless operation of your BMW with this high-quality service kit from Turner Motorsport.
Show More Show Less
VTT S55 Crank Bolt Capture - F8X S55 F3x N55
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Vargas Turbo Technologies - Corporate Logo
T#:557934
Part#: VTT-S55-CBC
In Stock
Sale - Save 15% $ 129.99

This product was last offered at the strikethrough price on
07-02-2026

$ 110.49 USD
Free Shipping
Sale - Save 15%
$ 129.99

This product was last offered at the strikethrough price on
07-02-2026

$ 110.49 USD
Free Shipping
The S55 suffers from a weak point in its crankshaft. It has been reported that when increasing the power to the engine, the crank hub can move or spin slightly under an extreme load.

Liqui Moly Molygen 5w-40 Oil Change Kit - BMW N52 N54 N55 3.0L ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:555453
Part#: LMOCK28KT
In Stock
Sale - Save 14% $ 123.99

This product was last offered at the strikethrough price on
05-15-2026

$ 106.38 USD
Free Shipping
Sale - Save 14%
$ 123.99

This product was last offered at the strikethrough price on
05-15-2026

$ 106.38 USD
Free Shipping
Liqui Moly is an official sponsor of Turner Motorsport. We work closely with Liqui Moly to ensure your BMW is receiving optimal lubrication! Select your vehicle to make sure you are viewing the best Liqui Moly options for your application. Includes: 7 Liters of Liqui Moly MolyGen 5w-40 Engine Oil Liqui Moly UV Flashlight Hengst Oil Filter Kit Febi Oil Drain Plug & Washer Liqui Moly Molygen New Generation fully synthetic engine oil is carefully engineered, starting with a high quality synthetic base. What separates Molygen from other engine oils is the molecular friction modifier for reduced friction and wear. Because of this, Molygen glows fluorescent green under UV light, allowing you to easily find any leaks! The fluorescent green chemical friction modifier smooths out hard metal surfaces, reducing overall engine wear and heat due to friction. Tests have shown to reduce the friction coefficient by 15%! MolyGen oil is also a great choice for modern forced induction engines which produce much more heat. BMWs are notorious for leaking oil. Make chasing your leak easier with Liqui Moly Molygen New Generation engine oil. (Once you find it, give us a call - we can help you stop that leak, too!) Smooth engine running characteristics Long engine service life due to exceptional protection against wear Rapid oil delivery at low temperatures Optimum oil pressure at all engine speeds Premium lubrication reliability at high and low temperatures High shear and ageing stability Reduces fuel consumption and pollutant emissions Outstanding engine cleanliness Tested with catalytic converters and performance proven with turbochargers Miscible and compatible with commercially-available engine oils Approved for the following specifications: ACEA C3 API SN / CF VAG 502.00 / 505.00 BMW Longlife-01 Liqui-Moly is a German chemical company that offers top of the line engine oils, additives, and car care products that are designed to extend the life of your engine and ensure the best lubrication and cleanliness off engine and transmission components possible. With more than 50 years of experience and reviews across the world from magazines and race teams, Liqui-Moly proves time and time again why they are one of the most innovative lead forces of performance automotive chemicals in the world.
Show More Show Less
VTT “OBD-LOCK” ODB Port Locking Tool
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
For Vehicles Produced After 1995
Vargas Turbo Technologies - Corporate Logo
T#:26938503
Part#: VTT-OBD-LOCK
In Stock
Sale - Save 15% $ 97.99

This product was last offered at the strikethrough price on
07-02-2026

$ 83.29 USD
Free Shipping
Sale - Save 15%
$ 97.99

This product was last offered at the strikethrough price on
07-02-2026

$ 83.29 USD
Free Shipping
VTT is proud to offer our “OBD-LOCK” OBD port locking tool. This is tool is made from billet 6061-T6 aluminum and is designed to completely lock out your OBD port from being accessed. This is useful for people who do not want dealers, techs, etc from accessing their OBD port, and possibly changing a tune, etc. This is also perfect for anti-theft prevention as it will not allow a would-be thief to hook up to the car’s OBD port, duplicate a key, etc. The OBD-LOCK cannot be removed without physically destroying the OBD port if you do not have the proper tools. VTT uses 5 types of screw head designs for every 200 OBD-LOCKS made. This means that worldwide only 40 OBD-LOCKS are using the same head design. For each batch of 200, we redesign the screw heads meaning every batch of 200 OBD-LOCKS will use different screw heads and tools. Each OBD-LOCK sent has its head design chosen at random. After Extensive testing, we have found that our OBD lock fits EVERY SINGLE OBD port we have tried, this means it will fit every single OBD port currently on the market from a high-end BMW to a Ford F150 diesel.
Show More Show Less

Liqui Moly Top Tec 6600 0W-20 Oil Change Kit - BMW F22/23 F3X G01/02 ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:24145950
Part#: B48LMTTOSKT
In Stock
$ 93.76 USD
Free Shipping on orders $49 and up
To keep your ultimate driving machine in top shape, regular maintenance is imperative. BMW's service interval for an oil change varies based on driving habits. We recommend changing your oil after no more than 10,000 miles. A 5,000 oil service interval is preferred for aggressive or city driving. This kit contains: 6L Top Tec 6600 0W-20 Motor Oil Engine Oil Filter with o-ring Oil Drain Plug with o-ring
Show More Show Less

BMW Oil Cap Crankcase Breather - All BMW w/2 prong oil fill cap ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Vargas Turbo Technologies - Corporate Logo
T#:558084
Part#: VTT-CRANK-BREATH
Ships in 8 Business Days
Sale - Save 15% $ 129.99

This product was last offered at the strikethrough price on
07-02-2026

$ 110.49 USD
Free Shipping
Sale - Save 15%
$ 129.99

This product was last offered at the strikethrough price on
07-02-2026

$ 110.49 USD
Free Shipping

VTT is happy to introduce the first and only available plug and play crankcase breather kits for ALL BMW applications that use the two-prong oil tab style oil fill caps. With this breather simply remove your oil cap, install the breather, and instantly free up horsepower, improve turbo draining, remove crankcase pressure, all while adding a cool look to your engine bay.

Can be used by itself with the stock PCV system to eliminate crankcase pressure, or with any number of PCV setups for the ultimate in crankcase pressure relieve 

Made from 6061-T6 Aircraft aluminum anodized black for a long-lasting finish, 4 stainless steel baffles for complete oil control, a PTFE one way check ball, a high-quality filter, and clamp all work together to keep crankcase pressure where it belongs, out of your crankcase.

This breather will fit:
 ALL BMW's with the two-prong style oil fill cap including but not limited to N54, N55, S55, S54

NOTE: NOT ALL THE MODELS LISTED HAVE THE SAME HOOD CLEARANCE, WE CANNOT SAY WHICH MODELS WILL HAVE CLEARANCE ISSUES, AND WHICH WILL NOT AS WE HAVE NOT TEST IT ON ALL MODELS. IF YOU ARE ORDERING THE BREATHER FOR ANYTHING OTHER THAN AN N54 TEST CLOSE YOUR HOOD CAREFULLY TO ENSURE CLEARANCE IF IT DOES NOT FIT LET US KNOW, AND WE WILL GET YOU A REFUND ONCE THE BREATHER IS RETURNED.

MODEL LIST OF REPORTED CLEARANCE ISSUES: N55 E/F 3 SERIES

Show More Show Less
Aluminum Valve Cover kit - F22/23 F3X F87 N55 3.0L
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:23913951
Part#: F3XN55MVCKT
In Stock
Sale - Save 23% $ 406.99

This product was last offered at the strikethrough price on
05-03-2026

$ 313.82 USD
Free Shipping on orders $49 and up
Sale - Save 23%
$ 406.99

This product was last offered at the strikethrough price on
05-03-2026

$ 313.82 USD
Free Shipping on orders $49 and up
If your valve cover has become cracked or warped, replace it with this quality Aluminum Valve Cover from Bremmen Parts to prevent leaks and further valvetrain damage. The upgraded aluminum valve cover included in this kit is the perfect solution to replace standard plastic valve covers that crack and split over time, leading to oil leaks! This kit includes everything needed to install a new valve cover, including a new CCV hose, gaskets, and hardware.
Show More Show Less
BMW N54 N55 S55 Mosselman Thermostat Installation Kit
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:4799665
Part#: THERMINSTALLKT
In Stock
Sale - Save 6% $ 22.99

This product was last offered at the strikethrough price on
06-15-2026

$ 21.64 USD
Free Shipping on orders $49 and up
Sale - Save 6%
$ 22.99

This product was last offered at the strikethrough price on
06-15-2026

$ 21.64 USD
Free Shipping on orders $49 and up

BMW N54 N55 S55 Mosselman Thermostat Installation Kit is designed to ensure a seamless installation of the Mosselman thermostat on BMW engines. This comprehensive kit from Turner Motorsport includes all necessary gaskets and components, guaranteeing a reliable and precise installation for optimal engine performance.

  • Complete Kit: Includes all essential gaskets and components required for a hassle-free thermostat installation.
  • Optimal Performance: Ensures proper installation of the Mosselman thermostat, leading to improved engine cooling efficiency and performance.
  • High-Quality Components: Gaskets and parts are manufactured to meet high standards of durability and reliability.
  • Precision Fit: Engineered to match OEM specifications, providing a perfect fit and reliable performance.
  • Ease of Installation: All necessary parts are included, simplifying the installation process and reducing the need for additional purchases.

Upgrade your BMW's cooling system with the Mosselman Thermostat Installation Kit from Turner Motorsport, ensuring a top-quality, reliable setup for your engine.

Show More Show Less


OE Rear Upper Shock Mount Kit w/ Hardware - F3X F2X
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:639047
Part#: 33506862725KT2
In Stock
Sale - Save 3% $ 168.99

This product was last offered at the strikethrough price on
05-03-2026

$ 163.15 USD
Free Shipping
Sale - Save 3%
$ 168.99

This product was last offered at the strikethrough price on
05-03-2026

$ 163.15 USD
Free Shipping
Strut mounts can begin to wear and fail over time, causing a knock in the suspension to occur. Replace yours with a OE Lemforder replacement to ensure a tight, noise-free ride. As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform! Genuine BMW Guide Support - This item fits the following BMW Chassis: F22,F30,F31,F32,F33,F36
Show More Show Less
Genuine BMW Oil Change Kit / Inspection I - N20, N52, N54, N55 ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:5376273
Part#: N55OCIKT
In Stock
$ 115.47 USD
Free Shipping
$ 115.47 USD
Free Shipping
To keep your driving machine in top shape, regular maintenance is imperative. BMW's service interval for an oil change varies based on driving habits. We recommend changing your oil after no more than 10,000 miles. A 5,000 oil service interval is preferred for aggressive or city driving. Includes seven quarts of BMW synthetic engine oil, Hengst oil filter This kit contains Seven Liters of BMW Synthetic Engine Oil Engine Oil Filter Oil Drain Plug Gasket (Included with filter kit)
Show More Show Less
Liqui Moly Special Tec LL 5W-30 Oil Change Kit / Inspection I - N20, ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:22130463
Part#: LMTECLLCHNGIN1KT
In Stock
$ 95.67 USD
Free Shipping on orders $49 and up
Ensuring your driving machine remains in optimal condition necessitates consistent maintenance. BMW's recommended oil change interval depends on your driving habits. We recommend changing your oil after a maximum of 10,000 miles. For those engaging in aggressive or city driving, a 5,000-mile oil service interval is preferable. This kit comprises: Seven Liters of Liqui Moly Special Tec LL Engine Oil 5w-30 Engine Oil Filter Oil Drain Plug Gasket (included with filter kit) Sustain the flawless performance of your BMW with this high-quality service kit from Turner Motorsport.
Show More Show Less

Water Pump And Thermostat Kit - N20
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:554053
Part#: 11517604027KT1
In Stock
Sale - Save 25% $ 461.99

This product was last offered at the strikethrough price on
05-03-2026

$ 344.49 USD
Free Shipping
Sale - Save 25%
$ 461.99

This product was last offered at the strikethrough price on
05-03-2026

$ 344.49 USD
Free Shipping

The N20/n26 engined cars already suffer from reduced cooling area because of the factory intercooler, tight space under the hood, and of course heat from the turbo(s). BMW addressed these challenges a number of ways, including a dynamic, 'smart' electric water pump with increased output compared to normally aspirated models. The cooling demands mean additional stress on the major cooling components, especially the water pump and thermostat. 
 

Kit includes:

  • Mahle-Behr thermostat
  • Pierburg water pump
  • Genuine BMW coolant
  • Mounting hardware required for both the thermostat and water pump

 

This item fits the following BMWs: 
2014+ F22 BMW 228i 228i xDrive 
2014+ F23 BMW 228i 228i xDrive 
2012+ F30 BMW 328i 328i xDrive - Sedan 
2013+ F31 BMW 328i xDrive - Wagon 
2013+ F32 BMW 428i 428i xDrive - Coupe 
2013+ F33 BMW 428i Convertible 428i xDrive Convertible - Convertible 
2014+ F34 BMW 328i xDrive GT - Gran Tourismo 
2014+ F36 BMW 428i Gran Coupe 428i xDrive Gran Coupe 
2012+ F10 BMW 528i 528i xDrive 
2011+ F25 BMW X3 xDrive28i 
2015+ F26 BMW X4 xDrive28i 
2009+ E89 BMW Z4 sDrive28i

Show More Show Less

Genuine BMW Oil Change Kit / Inspection I - N52, N54, N55
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:22789662
Part#: OILCHGN5XKT
In Stock
$ 108.23 USD
Free Shipping on orders $49 and up

Ensure your driving machine's peak performance with regular maintenance. Turner Motorsport offers a comprehensive service kit to keep your BMW in top shape. With varying oil change intervals based on driving habits, this kit includes:

  • Seven Liters of BMW Synthetic Engine Oil
  • Engine Oil Filter
  • Oil Drain Plug Gasket (Included with filter kit)

For optimal results, we recommend an oil change every 10,000 miles, or every 5,000 miles for aggressive or city driving. Trust Turner Motorsport to provide the quality and precision your BMW deserves.

Show More Show Less
N54/N55 Low Temp Oil Thermostat Kit - 70c
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:52621839
Part#: 008731KT1
In Stock
New Item
Sale - Save 23% $ 74.98

This product was last offered at the strikethrough price on
05-03-2026

$ 57.74 USD
Free Shipping on orders $49 and up
Sale - Save 23%
$ 74.98

This product was last offered at the strikethrough price on
05-03-2026

$ 57.74 USD
Free Shipping on orders $49 and up

Upgrade your stock oil cooler thermostat for improved performance. Swap your factory 110-degree Celsius thermostat for a new 70-degree Celsius version for faster oil flow and extended temperature control. With oil temperatures reaching 230 degrees Fahrenheit by the time your factory thermostat opens, initiating oil flow at lower temperatures proves more effective than attempting to cool down already elevated temperatures.

Utilizing a factory-style thermostat, this upgrade can be used in all weather conditions and allows your engine to warm up properly, unlike thermostat bypass kits.

Kit contents:​

Lower temperature thermostat - 70c (158F) vs Factory 110c (230F)
Low temp thermostat spring

Show More Show Less

Vargas "Spline Lock" Crank Hub Solution - Includes Crank Bolt Capture...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Vargas Turbo Technologies - Corporate Logo
T#:558795
Part#: VTT-CRANKHUB-1
Ships in 7 Business Days
Sale - Save 15% $ 889.99

This product was last offered at the strikethrough price on
07-02-2026

$ 756.49 USD
Free Shipping
Sale - Save 15%
$ 889.99

This product was last offered at the strikethrough price on
07-02-2026

$ 756.49 USD
Free Shipping
Under certain conditions, the N55 crank hub likes to spin, without warning and even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and ECS are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution.
Show More Show Less
Performance Brake Fluid Flush Kit - Level 3
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:15677547
Part#: 007237SCH01A-KT
In Stock
Sale - Save 9% $ 157.33

This product was last offered at the strikethrough price on
05-03-2026

$ 142.76 USD
Free Shipping on orders $49 and up
Sale - Save 9%
$ 157.33

This product was last offered at the strikethrough price on
05-03-2026

$ 142.76 USD
Free Shipping on orders $49 and up
Braking systems aren't indestructible, they require proper maintenance and care to keep contaminants and moisture free from the system. A full brake fluid flush is recommended to be performed at every 2 years or 30,000 miles, whichever occurs first (Intervals may vary for vehicles used on the track, check fluid specifications for more details). A proper flush removes debris left in the system from failed seals or deposits and ensures that the system is moisture free, to help prevent future rust or clogging issues. This kit includes everything you need to perform a proper brake fluid flush and refill using a fluid that features a greater boiling point for performance based applications. Includes: Schwaben European Pressure Bleeder Schwaben Catch Bottle Set Ate TYP 200 DOT 4 Brake Fluid - 1 Liter Schwaben Brake Bleeder Wrench **A typical flush only requires 1 liter of fluid to replace all of your old brake fluid.
Show More Show Less

Front Control Arm Refresh Kit - F22, F23, F30, F31, F32, F33, F36 ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:42099866
Part#: 31126854727TKT
In Stock
Sale - Save 3% $ 481.99

This product was last offered at the strikethrough price on
05-03-2026

$ 467.50 USD
Free Shipping on orders $49 and up
Sale - Save 3%
$ 481.99

This product was last offered at the strikethrough price on
05-03-2026

$ 467.50 USD
Free Shipping on orders $49 and up
Give your BMW the sharp handling it was engineered for with the Front Control Arm Refresh Kit, the perfect solution for a complete front suspension overhaul.

Front Suspension Refresh Kit - F2X, F3X
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:711928
Part#: 31126852991KT2
Ships on Aug 7, 2026
Sale - Save 7% $ 553.99

This product was last offered at the strikethrough price on
04-06-2026

$ 513.26 USD
Free Shipping
Sale - Save 7%
$ 553.99

This product was last offered at the strikethrough price on
04-06-2026

$ 513.26 USD
Free Shipping
Eliminate the most common sources of suspension slop with our all new Turner Suspension Refresh Kits that feature only OEM parts! We do not include any "cheap parts" in our refresh kits to ensure long-lasting reliability and noise-free suspension.
Show More Show Less
Accessory Belt Service Kit w/ Kevlar Reinforced Belt - BMW N55 F-Chas...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:22097553
Part#: 11287628661TKT
In Stock
Sale - Save 23% $ 131.99

This product was last offered at the strikethrough price on
06-16-2026

$ 101.98 USD
Free Shipping on orders $49 and up
Sale - Save 23%
$ 131.99

This product was last offered at the strikethrough price on
06-16-2026

$ 101.98 USD
Free Shipping on orders $49 and up
Eliminate your squeaking accessory belt pulley and cracked drive belt with this upgraded accessory belt service kit! This kit includes the ECS Kevlar Reinforced Drive Belt, tensioner assembly, and idler pulley. ECS Tuning's Red Kevlar Accessory Belts are both an aesthetic improvement and a performance alternative to a traditional belt. Kevlar-reinforced belts experience less elongation over time minimizing the amount of belt adjustment needed as well as offering a higher shock and impact resistance compared to OEM-style belts. Refreshing the rollers and/or tensioners simultaneously is a great way to ensure all vital components of your drive belt system are functioning optimally for years to come!
Show More Show Less
70c Low Temp Oil Thermostat Kit - N54/N55
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:30031507
Part#: N54N55LTKT1
Back Ordered
Sale - Save 18% $ 152.97

This product was last offered at the strikethrough price on
05-03-2026

$ 125.58 USD
Free Shipping on orders $49 and up
Sale - Save 18%
$ 152.97

This product was last offered at the strikethrough price on
05-03-2026

$ 125.58 USD
Free Shipping on orders $49 and up

Upgrade your stock oil cooler thermostat for improved performance. Swap out your existing cover with ease, replacing it with a durable billet cover. Upgrade from your 110-degree Celsius thermostat to a new 70-degree Celsius version for faster oil flow and extended temperature control. With oil temperatures reaching 230 degrees Fahrenheit by the time your factory thermostat opens, initiating oil flow at lower temperatures proves more effective than attempting to cool down already elevated temperatures.

Utilizing a factory-style thermostat, this upgrade can be used in all weather conditions and allows your engine to warm up properly unlike thermostat bypass kits.

Kit contents:

Billet thermostat housing cover
Replacement gasket
Hardware
Lower temperature thermostat - 70c (158F) vs Factory 110c (230F)
Low temp thermostat spring

Show More Show Less


Liqui Moly Longtime High Tech 5w-30 Oil Change Kit - N20 N52 N54 N55 ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:555429
Part#: LMOCK4KT
In Stock
Sale - Save 2% $ 105.99

This product was last offered at the strikethrough price on
03-09-2026

$ 103.49 USD
Free Shipping
Sale - Save 2%
$ 105.99

This product was last offered at the strikethrough price on
03-09-2026

$ 103.49 USD
Free Shipping

Liqui Moly is an official sponsor of Turner Motorsport. We work closely with Liqui Moly to ensure your BMW is receiving optimal lubrication!   Select your vehicle to make sure you are viewing the best Liqui Moly options for your application. 

Includes:

  • 7 Liters of Longtime High Tech Engine Oil 5w-30
  • Hengst Engine Oil Filter
  • Oil Drain Plug & Gasket

Longtime High Tech engine oil is designed to provide the highest amount of engine protection as well as fuel savings and reduced oil consumption possible. Using proprietary blends of base oils and the latest additive technology, this oil will ensure smooth running gasoline and diesel engines in both high and low temperatures. Other amazing benefits include: optimum oil pressure at all speeds, rapid oil delivery at low oil temperatures, high shear and aging stability, turbo and multi-valve compatibility, and long service life.

Properties:

  • Smooth engine running characteristics
  • Long engine service life due to exceptional protection against wear
  • Rapid oil delivery at low temperatures
  • Optimum oil pressure at all engine speeds
  • Premium lubrication reliability at high and low temperatures
  • High shear and ageing stability
  • Reduces fuel consumption and pollutant emissions
  • Outstanding engine cleanliness
  • Tested with catalytic converters and performance proven with turbochargers
  • Miscible and compatible with commercially-available engine oils

Approved for the following specifications:

  • ACEA C3
  • API SN / CF
  • BMW Longlife-04
  • MB-Approval 229.51
  • VAG 502.00 / 505.00

Recommended for the following specifications:

  • ACEA A3 / B4
  • MB 229.31
  • VAG 505.01

Liqui-Moly is a German chemical company that offers top of the line engine oils, additives, and car care products that are designed to extend the life of your engine and ensure the best lubrication and cleanliness off engine and transmission components possible. With more than 50 years of experience and reviews across the world from magazines and race teams, Liqui-Moly proves time and time again why they are one of the most innovative lead forces of performance automotive chemicals in the world.

Show More Show Less
OEM Accessory Belt Service Kit - F3X F10 N20 2.0L
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:587390
Part#: 11287594969ABKT
Ships in 7 Business Days
Sale - Save 29% $ 89.15

This product was last offered at the strikethrough price on
06-29-2026

$ 62.94 USD
Free Shipping
Sale - Save 29%
$ 89.15

This product was last offered at the strikethrough price on
06-29-2026

$ 62.94 USD
Free Shipping
This kit includes the basic components recommended to replace when it comes time to swap out your accessory belt.
Valvetronic Actuator Replacement Kit - N20 2.0L
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:24212289
Part#: 11377603979N20KT
In Stock
Sale - Save 10% $ 282.99

This product was last offered at the strikethrough price on
05-03-2026

$ 255.63 USD
Free Shipping on orders $49 and up
Sale - Save 10%
$ 282.99

This product was last offered at the strikethrough price on
05-03-2026

$ 255.63 USD
Free Shipping on orders $49 and up
If your Valvetronic Actuator has failed, this kit includes a new actuator and all of the basic gaskets necessary to replace the actuator. OEM VDO Valvetronic Actuator Actuator Gasket Valve Cover Gasket
Show More Show Less

Vargas N54/55 Billet Crank Seal Guard - BMW N54 N55 3.0L
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Vargas Turbo Technologies - Corporate Logo
T#:638889
Part#: VTT-CRANKGUARD
Ships in 4 Business Days
Sale - Save 15% $ 89.99

This product was last offered at the strikethrough price on
07-02-2026

Starting at $ 76.49 USD
Free Shipping
Sale - Save 15%
$ 89.99

This product was last offered at the strikethrough price on
07-02-2026

Starting at $ 76.49 USD
Free Shipping
It is a well-known issue on the BMW N54/55 platforms that your serpentine belt can fail for various reasons. When this happens, there is a high chance of the belt getting sucked behind the front damper pulley and then being pushed past the crank seal into your oil pan. From there it can get sucked into the oil pick up causing total engine failure. Even if you do not lose the engine, it is a COSTLY repair to remove the sub-frame and drop the oil pan to remove the belt. The best way to combat this is to watch for oil leaks and keep up on your maintenance. BUT, even with those preventative measures, pre-mature belt failure can occur. This crank seal guard installs over your front crank seal and will keep the belt from being sucked in if a belt failure does occur. This is a cheap way to ensure you do not end up having to replace your motor from oil starvation due to an ingested belt. Vargas' seal is different from those already on market in two major ways. Firstly, it is not offensively priced. Secondly, it is 100% billet with no welds on the tabs to break, no cheap bent thin steel pieces. 100% Billet 6061-T6 aluminum, anodized black for long-term corrosion resistance. Crank Seal Guard includes: One VTT Billet N54/55 Crank Seal Guard Two extended 12.9 Grade bolts, and two stainless washers We highly recommend you install WITH a crank bolt capture at the same time, as you have to remove the damper anyway. Then you will get the benefit of helping eliminate the dreaded spun crank hub and the crank seal issue
Show More Show Less

N20/N26 Complete Timing Chain Kit - BMW N20 RWD
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:21012589
Part#: N20N26TIMINGCHAI
Ships on Aug 14, 2026
Sale - Save 5% $ 780.99

This product was last offered at the strikethrough price on
06-12-2026

$ 743.49 USD
Free Shipping on orders $49 and up
Sale - Save 5%
$ 780.99

This product was last offered at the strikethrough price on
06-12-2026

$ 743.49 USD
Free Shipping on orders $49 and up
Eliminate N20/N26 Timing Chain Woes with Our Comprehensive Kit – Get Your BMW Back on Track!
B46/B48 Race-Inspired Cat-Back Exhaust - F30/F31/F32/F33/F36 ...
For Vehicles Equipped with an Automatic Transmission (S205A)
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:26238517
Part#: 048013LA06TKT
In Stock
Sale - Save 23% $ 892.99

This product was last offered at the strikethrough price on
05-03-2026

$ 684.68 USD
Sale - Save 23%
$ 892.99

This product was last offered at the strikethrough price on
05-03-2026

$ 684.68 USD

If you're seeking enhanced performance for your B46/B48 equipped F Chassis, explore our expertly crafted straight-pipe exhaust kit. By integrating our Turner Mid-Pipe Upgrade with the ECS Muffler Delete, you'll unlock the true potential and exhilarating, race-inspired sound of your exceptional 4-cylinder turbo engine!

Shedding an average of 27 lbs, this kit replaces your cumbersome and restrictive factory exhaust with lightweight, high-flow T304 stainless steel 3.0" exhaust piping. It's a seamless, direct bolt-on replacement for your entire factory exhaust, allowing you to swiftly elevate the performance of your daily driver or weekend warrior!

The B46/B48 engines represent a formidable new generation of 4 cylinders, boasting enhanced capabilities and a significantly improved exhaust note compared to their predecessors. Unlock the full driving potential of your underappreciated 330 or 430 with this brilliant curated kit designed specifically for you.

Features and benefits:

Complete sound and performance transformation
Simple, direct bolt-on installation (with instructions!)
27lb weight savings! (Muffler delete - 21 lbs, midpipe upgrade - 6 lbs!)
Tip adjustment capability ​
Slide farther on for left and right adjustment
Rotate for verticle adjustment
Good looking and durable 304 stainless steel construction
Heavy-duty fabricated sheet metal exhaust hangers
Dual staggered tip exhaust tips (integrated)
Installation and Support:

Installation is as easy as unbolting your factory exhaust and installing your full lightweight replacement
Tools you might want for the job:
Exhaust hanger removal pliers - T379176

Show More Show Less

VTT Gen-1 PCV CAP - B58
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Vargas Turbo Technologies - Corporate Logo
T#:4813265
Part#: VTT-B58-PCV-CAP
Ships in 9 Business Days
Sale - Save 15% $ 149.99

This product was last offered at the strikethrough price on
07-02-2026

$ 127.49 USD
Free Shipping
Sale - Save 15%
$ 149.99

This product was last offered at the strikethrough price on
07-02-2026

$ 127.49 USD
Free Shipping
Vargas has developed a solution to problematic PCV systems! Stock diaphragms on the gen-1 B58 Valve cover are fragile and can crack or tear over time. This can cause loss of crankcase vacuum and smoking. The VTT PCV cap replaces the factory plastic cap with a billet aluminum piece which uses a Billet Banjo fitting, and VTT's Vaccum/Boost adapter to move vacuum directly from the head ports to the manifold. This cap will also allow you to run a catch can on the low side if desired. VTT Recommends using this cap alongside their High Side Catch Can and crankcase breather for maximum efficiency. Installation is as simple as popping the stock cap off, removing the diaphragm, and placing the VTT components in place. Kit Includes: One Billet PCV Cap One Billet Banjo Fitting One Vaccum/Boost adapter One line with built-in check valve
Show More Show Less
VTT Billet Coolant Reservoir Cap - Anodized Blue - Most BMWs 2006+ (E...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Vargas Turbo Technologies - Corporate Logo
T#:7530036
Part#: COOLANTCAPBLUE
In Stock
Sale - Save 15% $ 79.99

This product was last offered at the strikethrough price on
07-02-2026

$ 67.99 USD
Free Shipping
Sale - Save 15%
$ 79.99

This product was last offered at the strikethrough price on
07-02-2026

$ 67.99 USD
Free Shipping
VTT is proud to offer their billet replacement for the factory plastic Coolant Reservoir cap. This cap does away with the weak plastic cap while adding some pop, and color to your engine bay. This coolant cap retains ALL of the factory provisions by simply allowing you to snap the factory pressure-relief into the new Billet Cap. VTT also designed these caps to complement their N5X Billet Oil caps, N5XBillet Oil filter housing caps, and Billet Power Steering cap, so all 4 will have the same design. These caps are offered in 4 colors – Red, Black, Blue, and Clear anodized Replaces Genuine BMW Reservoir Cap # 17117639020 Note: Fitment includes 99% of all BMW with a coolant Reservoir tank from the E series forward, meaning then fit even the brand New G8X M3/4 with the S58, all B58, etc. If your BMW is an E90 or newer this cap most likely will fit
Show More Show Less

Valve Cover kit - F22/23 F3X F87 N55 3.0L
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:23913948
Part#: F3XN55VCKT
In Stock
Sale - Save 24% $ 292.99

This product was last offered at the strikethrough price on
05-03-2026

$ 222.22 USD
Sale - Save 24%
$ 292.99

This product was last offered at the strikethrough price on
05-03-2026

$ 222.22 USD
If your valve cover has become cracked or warped, replace it with this quality Bavarian Autosport cover to prevent leaks and further valvetrain damage. This kit includes everything needed to install a new valve cover, including a new CCV hose, gaskets, and hardware!
Show More Show Less

B58 3.0L High-Performance Ignition Service Kit - Gen 1 B58 3.0L ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:22130470
Part#: B58IGNSERVKT
Ships on Sep 4, 2026
Sale - Save 19% $ 342.99

This product was last offered at the strikethrough price on
05-03-2026

$ 277.10 USD
Free Shipping on orders $49 and up
Sale - Save 19%
$ 342.99

This product was last offered at the strikethrough price on
05-03-2026

$ 277.10 USD
Free Shipping on orders $49 and up
Malfunctioning ignition coils or spark plugs can lead to issues like sputtering, rough idling, acceleration hesitation, misfires, and the illumination of the check engine light. If one of your ignition coils is faulty, it's a wise move to replace the spark plugs as well, preventing potential future problems, especially in cases of corroded or rusted connections. This kit showcases the innovative Bav Auto Performance Ignition Coils, equipped with core windings modified to enhance firepower and facilitate a faster, more efficient combustion process. It's an excellent choice for tuned or modified vehicles! The kit includes: 6 NGK 94201 Spark Plugs 6 Bav Auto Performance Ignition Coils AGS dielectric grease Spark Plug Service Indicator Label In need of a 12-Point spark plug socket? We recommend the Schwaben Magnetic Spark Plug Socket, part number ES2561145. Elevate your vehicle's performance with Turner Motorsport.
Show More Show Less
F3x Front & Rear Brake Service Kit
For vehicles without M sport brakes and a production date from 07/2014+. 312x24mm Front...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:5403273
Part#: F3XRPSKT
Ships on Jul 30, 2026
Sale - Save 29% $ 657.99

This product was last offered at the strikethrough price on
05-03-2026

$ 468.20 USD
Free Shipping
Sale - Save 29%
$ 657.99

This product was last offered at the strikethrough price on
05-03-2026

$ 468.20 USD
Free Shipping
Featuring Zimmermann rotors and ECS DD23 ceramic pads. Everything you need to service your front and rear brakes in an afternoon in one simple kit from Turner Motorsport. By providing it all for you in a single click, Turner has made it easier than ever to get the quality replacement matching components you need when beginning a brake service. Our brake service kit includes rotors, pads, sensors, assembly grease, and even a full compliment of set screws to make your brake replacement easy. A complete matched kit assembled by our team of experts, will keep all of your brake components working in perfect harmony. Includes the following parts: Front and rear Zimmermann rotors Front and rear Textar pads URO pad wear sensors Stainless steel rotor set screws 4 AGS Syl-Glide Silicone Brake lubricant packets Turner Motorsport stocks a large inventory of premium brake components, including hoses, hard lines, fluids, hardware, and hi-temp lubricants. Everything you need to perform a professional quality brake service, you can find at Turner Motorsport
Show More Show Less
N55 Performance Flywheel And Clutch Kit - 6 Bolt - E82/E88/E90/E92/E9...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:37655994
Part#: N55PCTKT
Ships on Sep 21, 2026
Sale - Save 8% $ 1,299.99

This product was last offered at the strikethrough price on
05-03-2026

$ 1,193.39 USD
Sale - Save 8%
$ 1,299.99

This product was last offered at the strikethrough price on
05-03-2026

$ 1,193.39 USD

Turner Motorsport Lightweight N55 Flywheel & Upgraded Clutch Kit

Unlock the full potential of your N55-powered BMW with our performance-driven clutch and flywheel kit. Designed to enhance daily drivability while delivering increased power handling and improved throttle response, this kit is the ultimate upgrade for enthusiasts seeking more from their vehicle.

Why Choose This Kit?
This setup features the Turner Lightweight N55 Flywheel, precision-engineered for quicker acceleration, faster rev-matching, and a more responsive driving experience. Paired with an upgraded OE clutch from the high-performance 335is and F10 550i(V8 Bi-Turbo), this combo is capable of handling over 500 ft-lbs of torque while maintaining smooth, factory-like engagement and durability.

The factory dual-mass flywheel may prioritize smoothness and efficiency, but it comes at the cost of responsiveness and is prone to failure in high-performance applications. The Turner Lightweight Flywheel solves these issues with a single-mass design that strikes the perfect balance between comfort, performance, and reliability making it ideal for both daily driving and spirited track use.

Kit Contents:

Turner Lightweight N55 Single-Mass Flywheel (18.6 lbs, 10 lbs lighter than stock)
Upgraded OE Clutch – Supports 500 ft-lbs+
OE Clutch Fork - P# 21517564027
OE Throwout Bearing
Brass Clutch Fork Pivot Pin - P# 21511223328
OE Flywheel Bolts - P# 11227520706
OE Pressure Plate Screws - P# 21207548052
Pivot Pin Retaining Spring - P# 21517570284
Transmission Mating Dowels - P# 11117524470
Flywheel Features:

Precision-machined 4140 HT heat-treated chromoly steel for durability
Black oxide coating to resist corrosion
Precision balanced to exceed OEM standards
Optimized step height for longer clutch life and consistent performance
Clutch:

Upgrade for 135i/335i/535i models from the 335is! Featuring a heavy-duty clutch with more holding power and a stock-like pedal feel. Excellent solution for If your clutch is slipping, or the engagement isn't what it used to be, it's time for a replacement. Slipping clutches won't allow your BMW to accelerate properly and can pose problems under a load such as going up large inclines. Also, a worn clutch can cause less precise and engaging shifts. By replacing your clutch you will restore performance and driving pleasure.

This clutch is an excellent upgrade for non 335is/550i/650i models. It features a more heavy-duty clutch disc and more holding power with stock-like pedal effort.

Transform your driving experience with this Turner Motorsport clutch and flywheel kit - engineered for power, performance, and everyday reliability.

Show More Show Less


Spline Lock Crank Hub Solution W/ Complete Package - N55 S55 ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Vargas Turbo Technologies - Corporate Logo
T#:18733532
Part#: VTT-CRANKHUB-6
In Stock
Sale - Save 15% $ 986.99

This product was last offered at the strikethrough price on
06-28-2026

$ 838.94 USD
Free Shipping
Sale - Save 15%
$ 986.99

This product was last offered at the strikethrough price on
06-28-2026

$ 838.94 USD
Free Shipping
Under certain conditions, the N55 crank hub likes to spin, without warning and even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and ECS are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution.
Show More Show Less
N20 Timing Chain Rebuild Kit - F22/23 F3X N20 2.0L
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:23913961
Part#: N20TMGKT
In Stock
Sale - Save 8% $ 387.41

This product was last offered at the strikethrough price on
05-03-2026

$ 354.84 USD
Free Shipping on orders $49 and up
Sale - Save 8%
$ 387.41

This product was last offered at the strikethrough price on
05-03-2026

$ 354.84 USD
Free Shipping on orders $49 and up
Contains all the required components for the replacement of your N20 engine's timing chain. Kit includes: All required Gaskets and seals Camshaft timing chain tensioners with retaining clips Timing chain tensioner for crankshaft to camshaft with sealing washer Timing chain guide rails Timing chain 2 Gallons BMW coolant Replacement oil filter with associated o-ring. 6 quarts BMW High Performance 5w30 Synthetic oil
Show More Show Less
Automatic Transmission Service Kit - BMW 8HP F & G-Chassis- Liqui Mol...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:31191945
Part#: TMS8HPATSKT1
In Stock
Sale - Save 1% $ 201.99

This product was last offered at the strikethrough price on
04-14-2026

$ 200.32 USD
Free Shipping on orders $49 and up
Sale - Save 1%
$ 201.99

This product was last offered at the strikethrough price on
04-14-2026

$ 200.32 USD
Free Shipping on orders $49 and up
Over the life of a vehicle, the transmission can often be overlooked when performing routine maintenance. If left unserviced, the automatic transmission fluid will break down, causing the valve body and filter to become contaminated with deposits and sludge. This will lead to poor shifting, slipping, and ultimately, transmission failure. Kit Includes: OEM Hengst Automatic transmission filter OEM Hengst Oil Pan Gasket & Installation Hardware OEM Hengst Drain plug with sealing washer OEM Hengst Fill plug with sealing washer 7 Liters of Liqui-Moly Top Tec 1800 ATF NOTE: Depending on the model, an additional liter of fluid may be necessary if you are draining your oil cooler or removing the valve body. As per ZF's recommendations, Turner Motorsport suggests performing a full service on your 8HP automatic transmission every 50,000 miles. If your vehicle is modified and makes more power than stock or if your vehicle is regularly track-driven, we recommend shorter 30,000-mile service intervals. This will ensure your transmission's fluid is free from contamination which will help extend the life of internal transmission components like clutch packs and solenoids.
Show More Show Less

VTT Billet Coolant Reservoir Cap - Anodized Red - Most BMWs 2006+ (E/...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Vargas Turbo Technologies - Corporate Logo
T#:7530034
Part#: COOLANTCAPRED
In Stock
Sale - Save 15% $ 79.99

This product was last offered at the strikethrough price on
07-02-2026

$ 67.99 USD
Free Shipping
Sale - Save 15%
$ 79.99

This product was last offered at the strikethrough price on
07-02-2026

$ 67.99 USD
Free Shipping
VTT is proud to offer their billet replacement for the factory plastic Coolant Reservoir cap. This cap does away with the weak plastic cap while adding some pop, and color to your engine bay. This coolant cap retains ALL of the factory provisions by simply allowing you to snap the factory pressure-relief into the new Billet Cap. VTT also designed these caps to complement their N5X Billet Oil caps, N5XBillet Oil filter housing caps, and Billet Power Steering cap, so all 4 will have the same design. These caps are offered in 4 colors – Red, Black, Blue, and Clear anodized Replaces Genuine BMW Reservoir Cap # 17117639020 Note: Fitment includes 99% of all BMW with a coolant Reservoir tank from the E series forward, meaning then fit even the brand New G8X M3/4 with the S58, all B58, etc. If your BMW is an E90 or newer this cap most likely will fit
Show More Show Less

Zimmermann Front And Rear Brake Service Kit - F22 / F30 / F32 ...
For vehicles with standard brakes and a production date up to 07/2015
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:23847537
Part#: F&RSRVBRKKITKT
Ships on Jul 30, 2026
Sale - Save 24% $ 601.99

This product was last offered at the strikethrough price on
04-08-2026

$ 455.06 USD
Sale - Save 24%
$ 601.99

This product was last offered at the strikethrough price on
04-08-2026

$ 455.06 USD

Ensure a seamless front and rear brake service with Turner Motorsport's all-in-one kit. This comprehensive brake service package simplifies the process by offering rotors, pads, sensors, assembly grease, and a complete set of set screws for easy brake replacement. Crafted by experts, this matched kit ensures optimal performance and harmony among all brake components.

Included components:

  • Front and rear Zimmermann rotors
  • Front and rear Textar pads
  • Front and rear pad wear sensors
  • Rotor set screws
  • 4 AGS Syl-Glide Silicone Brake lubricant packets

Turner Motorsport houses an extensive collection of premium brake components, encompassing hoses, hard lines, fluids, hardware, and high-temperature lubricants. Find everything essential for a professional-grade brake service at Turner Motorsport.

Show More Show Less
Liqui Moly Molygen 5w-40 Oil Change Kit w/ Magnetic Drain Plug - N20 ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:555449
Part#: LMOCK23KT
In Stock
Sale - Save 10% $ 142.99

This product was last offered at the strikethrough price on
05-15-2026

$ 129.16 USD
Free Shipping
Sale - Save 10%
$ 142.99

This product was last offered at the strikethrough price on
05-15-2026

$ 129.16 USD
Free Shipping

Liqui Moly is an official sponsor of Turner Motorsport. We work closely with Liqui Moly to ensure your BMW is receiving optimal lubrication!   Select your vehicle to make sure you are viewing the best Liqui Moly options for your application. 

Includes:

7 Liters of Liqui Moly MolyGen 5w-40 Engine Oil
Liqui Moly UV Flashlight
Hengst Oil Filter Kit
ECS Tuning Magnetic Drain Plug & Washer

Liqui Moly Molygen New Generation fully synthetic engine oil is carefully engineered, starting with a high quality synthetic base. What separates Molygen from other engine oils is the molecular friction modifier for reduced friction and wear. Because of this, Molygen glows fluorescent green under UV light, allowing you to easily find any leaks!

The fluorescent green chemical friction modifier smooths out hard metal surfaces, reducing overall engine wear and heat due to friction. Tests have shown to reduce the friction coefficient by 15%!  MolyGen oil is also a great choice for modern forced induction engines which produce much more heat. BMWs are notorious for leaking oil. Make chasing your leak easier with Liqui Moly Molygen New Generation engine oil. (Once you find it, give us a call - we can help you stop that leak, too!)

Properties:

  • Smooth engine running characteristics
  • Long engine service life due to exceptional protection against wear
  • Rapid oil delivery at low temperatures
  • Optimum oil pressure at all engine speeds
  • Premium lubrication reliability at high and low temperatures
  • High shear and ageing stability
  • Reduces fuel consumption and pollutant emissions
  • Outstanding engine cleanliness
  • Tested with catalytic converters and performance proven with turbochargers
  • Miscible and compatible with commercially-available engine oils

Approved for the following specifications:

  • ACEA C3
  • API SN / CF
  • VAG 502.00 / 505.00
  • BMW Longlife-01

Liqui-Moly is a German chemical company that offers top of the line engine oils, additives, and car care products that are designed to extend the life of your engine and ensure the best lubrication and cleanliness off engine and transmission components possible. With more than 50 years of experience and reviews across the world from magazines and race teams, Liqui-Moly proves time and time again why they are one of the most innovative lead forces of performance automotive chemicals in the world.

Show More Show Less

Vargas Ignition Coil Kit (Blue) - N5x
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Vargas Turbo Technologies - Corporate Logo
T#:5309605
Part#: VTT-COIL-N5X-BLU
In Stock
Sale - Save 15% $ 169.99

This product was last offered at the strikethrough price on
07-02-2026

$ 144.49 USD
Free Shipping
Sale - Save 15%
$ 169.99

This product was last offered at the strikethrough price on
07-02-2026

$ 144.49 USD
Free Shipping
Vargas has contacted multiple coil manufacturing companies, paying for individual coils to be made then putting them through rigorous testing in the USA to ensure they matched or exceeded factory output. Once satisfied with the testing, the best performing coils were made to various colors and specs. Vargas is proud to offer a new line of ignition coil replacements for N5x Engines. VTT N5X coils are tested against Delphi 10571 coils which are an upgrade over stock N5X factory coils. The VTT performance matches or exceeds a Delphi 10571 Coil. The coils are offered in a choice of black, red, and blue.
Show More Show Less
Thermostat Replacement Kit - E82 E9X E84 E70 E71 With N55 Engines ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:554075
Part#: 11537601158KT2
In Stock
Sale - Save 24% $ 106.99

This product was last offered at the strikethrough price on
05-03-2026

$ 81.36 USD
Free Shipping
Sale - Save 24%
$ 106.99

This product was last offered at the strikethrough price on
05-03-2026

$ 81.36 USD
Free Shipping

If your vehicle is experiencing cooling issues, chances are the thermostat is the cause. Common symptoms include prolonged warm-up at highway speeds from the thermostat being stuck open, or consistent overheating issues from the thermostat being stuck in the closed position. Either condition can result in poor performance, and potential damage to vital components in your vehicle.

Kit includes

  • Wahler Thermostat
  • 1 liter of Coolant

This item fits the following BMWs: 
2008-2013  E82 BMW  135i 135is 1M Coupe 
2013+  E84 BMW  X1 xDrive35i 
2011  E90 BMW  335i 335xi 335i xDrive - Sedan 
2011-2013  E92 BMW  335i 335xi 335i xDrive - Coupe 
2011-2013  E93 BMW  335i Convertible 
2011-2013  E70 BMW  X5 xDrive35i 
2011-2013  E71 BMW  X6 xDrive35i

Show More Show Less

High-Performance Ignition Service Kit - Gen 1 B58 3.0L
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:21965985
Part#: B58IGNKT
Ships on Sep 4, 2026
Sale - Save 19% $ 342.99

This product was last offered at the strikethrough price on
05-03-2026

$ 277.10 USD
Free Shipping on orders $49 and up
Sale - Save 19%
$ 342.99

This product was last offered at the strikethrough price on
05-03-2026

$ 277.10 USD
Free Shipping on orders $49 and up
Every 60-80,000 miles, we recommend replacing your spark plugs to ensure your ignition system is running optimally. Over time carbon can build up around the head of the spark plug and decrease spark strength and effectiveness, leading to weaker fuel mixture detonation, misfires, and potential check engine lights. To prevent this, have put together our High-Performance Ignition Service Kits. These kits include new Bav Auto High-Performance Ignition Coils, new spark plugs, dielectric grease, and a BMW spark plug service label to keep track of when your spark plugs were replaced. Bav Auto's Ignition coils feature core windings that have been modified to increase firepower and promote a faster, more efficient burn. This gives your BMW/MINI increased torque in the lower range of RPM and more horsepower in the upper range. Exact improvements depend on the current condition of your engine, but you'll definitely feel the difference. They'll also improve your fuel economy. From 1974 to 2019, Bavarian Autosport was one of the premier vendors for BMW and MINI auto parts. We are happy to preserve the Bav Auto legacy by continuing to carry their high-quality products into the future. All Bav Auto parts will remain unchanged in design and sourced from the same OEM suppliers to ensure long-lasting reliability. We trust these parts, accessories, and upgrades so confidently that we back every Bavarian Autosport branded component with a 2-year warranty. As a leading source of high-performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform! This kit contains: 6 NGK 94201 Spark Plugs 6 Bavarian Autosport Ignition Coils 1 Dielectric Spark Plug Boot Protector - 4 Gram Packet
Show More Show Less

Vargas B58 Gen 1 One Way Crankcase Breather - F Chassis B58 3.0L ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
For Gen1 B58 Engines
Vargas Turbo Technologies - Corporate Logo
T#:638800
Part#: VTT-B58-BREATHER
Ships in 6 Business Days
Sale - Save 15% $ 127.99

This product was last offered at the strikethrough price on
07-02-2026

$ 108.79 USD
Free Shipping
Sale - Save 15%
$ 127.99

This product was last offered at the strikethrough price on
07-02-2026

$ 108.79 USD
Free Shipping
VTT is happy to introduce the first and only available plug and play ONE-WAY crankcase breather kit for BMW B58 applications. With this breather simply remove your oil cap, install the breather, and instantly free up horsepower, improve turbo draining, remove crankcase pressure, all while adding a cool look to your engine bay. FITS with the engine cover on. Engine cover can be removed, and installed without removing the breather. Can be used by itself with the stock PCV system to eliminate crankcase pressure, or with any number of PCV setups, including our VTT Engine catch can for the ultimate in crankcase pressure relief. Made from 6061-T6 Aircraft aluminum anodized black for a long-lasting finish, 4 stainless steel baffles for complete oil control, a PTFE one way check ball, a high-quality filter, and clamp all work together to keep crankcase pressure where it belongs, out of your crankcase. This breather will fit all B58 Vehicles that use the most common oil fill cap design. This does NOT mean it fits all BMW vehicles. The breather sits about 2.5″ tall from the valve cover oil cap area, and the filter is 2-3/4″ in diameter NOTE: NOT ALL THE B58 MODELS LISTED HAVE THE SAME HOOD CLEARANCE, WE CANNOT SAY WHICH MODELS WILL HAVE CLEARANCE ISSUES AND WHICH WILL NOT AS WE HAVE NOT TESTED FIT ON ALL MODELS. PLEASE TEST CLOSE YOUR HOOD CAREFULLY TO ENSURE CLEARANCE. IF IT DOES NOT FIT LET US KNOW, AND WE WILL GET YOU A REFUND ONCE THE BREATHER IS RETURNED.
Show More Show Less
VTT B58/S58 Cylinder Head Port Block-Off Kit - BMW B58 Gen1/2/3 (B58/...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Vargas Turbo Technologies - Corporate Logo
T#:49822557
Part#: VTTBS58BLOCK
In Stock
New Item
Sale - Save 15% $ 29.99

This product was last offered at the strikethrough price on
07-02-2026

$ 25.49 USD
Free Shipping
Sale - Save 15%
$ 29.99

This product was last offered at the strikethrough price on
07-02-2026

$ 25.49 USD
Free Shipping
The VTT B58/S58 Head Port Block-Off kit is designed to either seal off the factory head ports used by the OEM low-side PCV system. These ports in the cylinder head utilize engine vacuum to evacuate crankcase gases, but in the process, can allow oil to enter the intake manifold, leading to valve carbon buildup and other performance issues over time. The Block-Off kit offered by VTT completely seals the factory head ports to prevent oil intrusion and unwanted vacuum leaks. This kit does NOT require any tapping, meaning no metal to get into the engine, etc. You simply tap the plugs into place. Key Features Eliminates oil draw-through into the intake manifold Prevents carbon buildup on intake valves Utilizes precision-machined plugs for boost sealing Fully reversible — Block-offs can be removed if needed No tapping is required. Easy install, by tapping the blocks into place.
Show More Show Less
N20 2.0L Genuine BMW Oil Change Kit / Inspection I
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:22130468
Part#: GENUOILCHGIN1KT
In Stock
$ 104.68 USD
Free Shipping on orders $49 and up
To maintain your driving machine's peak performance, regular maintenance is crucial. BMW's recommended oil change interval varies depending on your driving habits. We suggest changing your oil no later than every 10,000 miles. For those with a more aggressive or city driving style, a 5,000-mile oil service interval is preferable. This kit includes: Six Quarts of BMW Synthetic Engine Oil - 0W-20 Engine Oil Filter Oil Drain Plug Gasket (included with the filter kit) Ensure your BMW operates flawlessly with this high-quality service kit from Turner Motorsport.
Show More Show Less


Liqui Moly Voll-Synthese Energy 0w-40 Oil Change Kit - N20 N52 N54 N5...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:555448
Part#: LMOCK22
In Stock
$ 112.10 USD
Free Shipping
$ 112.10 USD
Free Shipping

Liqui Moly is an official sponsor of Turner Motorsport. We work closely with Liqui Moly to ensure your BMW is receiving optimal lubrication!   Select your vehicle to make sure you are viewing the best Liqui Moly options for your application.

Includes:

7 Liters of Liqui Moly 0w-40 Voll-Synthese Energy Oil
Hengst Oil Filter Kit
Febi Oil Drain Plug & Washer

Liqui-Moly's Voll-Synthese Energy engine oil is specifically formulated for optimum oil penetration speed, deposit prevention, and resistance to aging. These factors allow for exceptional gasoline or diesel engine cleanliness, keeping the surfaces of the engine and engine components free from carbon and sludge deposits. This allows the oil to form a stronger film that in turn helps prevent wear much more efficiently than many standard oils. This also allows for easy, smooth engine operation that results in better responsiveness and less total fuel consumption.

Meets the following requirements;

  • ACEA A3-98/B3-98
  • API SJ-CF
  • BMW [Longlife] LL-98
  • Daimler (MB 229.1)
  • VW 502.00 - 505.00

Liqui-Moly is a German chemical company that offers top of the line engine oils, additives, and car care products that are designed to extend the life of your engine and ensure the best lubrication and cleanliness off engine and transmission components possible. With more than 50 years of experience and reviews across the world from magazines and race teams, Liqui-Moly proves time and time again why they are one of the most innovative lead forces of performance automotive chemicals in the world.

Show More Show Less
N55 Rod Bearing Replacement Kit
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:23913954
Part#: N55RODBRGKT
Ships in 7 Business Days
Sale - Save 1% $ 503.95

This product was last offered at the strikethrough price on
05-03-2026

$ 499.54 USD
Free Shipping on orders $49 and up
Sale - Save 1%
$ 503.95

This product was last offered at the strikethrough price on
05-03-2026

$ 499.54 USD
Free Shipping on orders $49 and up
This kit includes everything needed to replace the rod bearings in your N55 engine. Kit includes Upper and lower rod bearings Hardware Oil filter BMW TwinPower Turbo Oil Oil pan gasket RedLine assembly lube
Show More Show Less