BMW Suspension Parts for BMW 4 Series F32 (2014+)

The ECS Coilover Line was designed with the "daily drivers" in mind! Focused on improving the performance and aesthetics of your vehicle without forgetting comfort. With 32 levels of available damping and height adjustments tailored to each car, ECS coilovers are right in that sweet spot of firm and compliant while giving you an aggressive look and vastly improved handling.

The ECS Tuning Performance Coilover System provides a sport-tuned, height, damping, and body adjustable suspension with substantial performance benefits using high-quality materials and coatings to replace your worn suspension, all while giving your vehicle that perfect ride height!

PERFORMANCE FEATURES:

32 levels of rebound damping adjustment
Includes adjustable front sway bar end links
Integrated camber plates for +/-1.5 degrees of adjustment to dial in your fitment and alignment
Lowering Adjustment of: 1.5" - 4"
Heat treated, progressive rate coil springs. 8k Front 10K Rear
Adjustable damping, monotube shocks/struts paired with optimized progressive rate coil springs gives your vehicle road-sticking grip with reduced body roll for exceptional confidence in your vehicle's handling. With your vehicle's new, lower ride height the center of gravity is now moved lower, further improving handling performance
Adjustable front bodies allow you to set the ride height while maintaining correct spring pre-load
Adjustable front and rear bodies allow the shock to operate in the correct valving range, regardless of ride height

PRODUCT DESIGN:

Strut and shock bodies finished with a durable gloss black powder coat for good looks and great longevity
Threaded portions are are zinc-coated for optimum corrosion protection against rain and salt (finish will vary between clear or black zinc coatings depending on availability)
Coil springs are powder-coated Reflex Silver Metallic finish for durability
Red anodized, billet aluminum spring seats with locking collars allow for quick, on the car, adjustability with the included spanner wrenches
Self-locking, zinc-coated flanged nuts used for shock & strut shaft pins
Anodized adjustable sway bar end links with heavy duty bushings
Zinc coated strut mount securing nuts included
Rear shock adjuster housings are black E-coated for durability
Zinc-coated lower spring perches
Integrated bump stops and dust boots

PRODUCT DEVELOPMENT

ECS Tuning Adjustable Damping Coilover Systems are developed in-house, tested and inspected by the Research & Development team in our Wadsworth, Ohio facility. The highest level of precision and quality through leading-edge product development technology and methods, ensuring the necessary long term product testing was performed on multiple test vehicles in the harshest conditions available.
Fitment:
For vehicles with 5 bolt upper strut mounts

F22, F23, F30, F32, F33, F34, F36

The ECS BMW Coilover line was designed with daily drivers in mind! The ECS engineer's focus was to improve the performance and look of the suspension, without forgoing ride comfort. Like many top-tier coilovers, these coilovers feel as smooth and comfortable as a stock setup, while also providing an aggressive look and vastly improved handling.

The ECS Performance Coilover System provides a sport-tuned, height, damping, and body adjustable suspension with substantial performance benefits using high-quality materials and coatings to replace your worn suspension, all while giving your vehicle that perfect ride height!

Spring Rates: 8kg/mm (front), 12kg/mm (rear)

PERFORMANCE FEATURES

32 levels of rebound damping adjustment Adjustable damping, monotube shocks/struts paired with optimized progressive rate coil springs give your vehicle road-sticking grip with reduced body roll for exceptional confidence in your vehicle's handling. With your vehicle's new, lower ride height the center of gravity is now moved lower, further improving handling performance Adjustable front bodies allow you to set the ride height while maintaining correct spring pre-load Adjustable front and rear bodies allow the shock to operate in the correct valving range, regardless of ride height PRODUCT DESIGN

Strut and shock bodies finished with a durable gloss black powder coat for good looks and great longevity Threaded portions are clear zinc-coated for optimum corrosion protection against rain and salt Coil springs are powder-coated Reflex Silver Metallic finish for durability Red anodized, billet aluminum lower spring seats with locking collars allow for quick, on-the-car, adjustability with the included spanner wrenches Integrated bump stops KIT CONTENTS

ECS Performance Adjustable Coilover System - F2X/F3X (3-Bolt) Front Suspension Installation Hardware Strut Mount Gasket - 31306868240 (2) Spindle Pinch Bolt - 31306798530 (2) Spindle Pinch Nut - 07119905032 (2) Tension Strut Bolt - 31106885777 (2) Control Arm Bolt - 31106797237 (2) Control Arm Nut - 33326760668 (2) Ball Joint Locking Nut - 33306787062 (4) Rear Suspension Installation Hardware Shock to Control Arm Bolt - 07119907372 (2) Shock to Control Arm Nut - 33326760668 (2) Shock Mount Bolt - 07119907137 (6) Shock Mount Gasket - 33506866038 (2) Control Arm to Wheel Carrier Bolt - 33326762875 (2) Control Arm to Wheel Carrier Nut - 33306760349 (2)

This kit is contains all new strut and shock mounts and hardware needed when installing a new shocks and struts or aftermarket suspension on your vehicle. 

Fits the following BMW's

F22/23 228i 228i xDrive M235i M235i xDrive without EDC and production date up 03/2015 

F30 320i 320i xDrive 328d 328d xDrive 328i 328i xDrive 335i 335i xDrive without EDC and production date up 03/2015 

F32/33/36 428i 428i xDrive 435i 435i xDrive 

All the hardware you need to remove and replace your front and rear suspension with new coilovers.

This Kit includes the following items:

FRONT​​

Front strut pinch bolts - QTY 2
Front strut pinch bolt nuts - QTY 2
Control arm ball-joint nuts - QTY 4
REAR​

Lower shock mounting bolts - QTY 2
Lower shock locking nuts - QTY 2
Upper shock mounting bolts - QTY 6
Shock mounts - QTY 2
Shock pads - QTY 2

Elevate your driving experience with enhanced performance and aesthetics. ECS lowering springs are crafted to optimize both handling and comfort, striking the perfect balance between performance and drivability. With an average lowering range of 1.6", enjoy the benefits of a lower center of gravity, resulting in superior cornering and enhanced steering feedback. Not only do these lowering springs improve handling, but they also deliver a remarkable aesthetic transformation by reducing the wheel gap, giving your car a more planted and fitted appearance.

Features and Design:

Average FRONT lowering of 1.6" - 1.8"
Average REAR lowering of 1.4" - 1.6"
Lowered center of gravity
Compatible with cars equipped with EDC
Linear style springs
Black powder coating with red ECS logo
MADE IN THE USA
Designed specifically for your chassis these ECS lowering springs feature a linear style spring similar to a coilover. The issue with coilovers is the rough ride due to a drastic drop and much higher spring rates. When you have a higher spring rate like coilovers, it takes much more force to compress the spring, leading to a much more rigid ride. ECS lowering springs provide a happy medium between the factory suspension and coilover suspension. Our springs are stiffer than factory but softer than a coilover spring to achieve the balance of increased performance and aesthetics while retaining a comfortable ride.

The SPL BMW F2X/F3X Front Lower Control Arms (FLCA) provide roll center, camber, and track width adjustment for the rear wheel drive (RWD) F2X/F3X BMWs while eliminating bushing deflection resulting in sharpened steering response and driving precision.

Negative Camber Benefits

The ability to run more negative camber greatly improves the peak lateral grip available. Adding negative camber results in the tire having an optimal contact patch as the body rolls due to cornering forces. This is especially important with better tires and a must-have for anyone looking to prevent excessive outer shoulder wear (and heating) on their tires due to a lack of camber.

Wider Front Track Width Benefits

Further handling improvements can be had by increasing the front track width from the factory 60.5" (F3X) or 59.9" (F2X) to be closer to the M3's 62.2". If you applied the M3's width to the M340i it would reduce the outer front tire loading by roughly 20 lbs and apply it to the inner front tire. The result would be greater peak grip (~0.04G), improved stability, and faster lap times.

Roll Center Correction Benefits

Lowering the F2X/F3X results in a greater distance between the front roll center and the center of gravity. This acts like a longer lever, creating more body roll, bumpsteer, and requiring additional static camber angle to maintain the same handling. The SPL front lower control arms allow the roll center to be corrected for a wide range of ride heights to improve handling and stability.

The lower control arms come with a ride height sensor bracket to maintain the factory ride height sensor location, regardless of length of the arm to keep those finicky BMW chassis electronics happy.

Benefits

Adjustable Camber, Roll Center, and Track Width

Eliminates Bushing Deflection

Improved Tire Life with Ideal Camber Settings

Lightweight, High-Strength Construction

Stackable 304SS Roll Center Spacers in 1/8" and 1/4" Sizes

US Made, PTFE Lined FK Rod Ends 

Materials

6061-T6 aluminum black anodized arm, clamps, and spacers

4130 CrMo electroless nickel-plated double adjuster

Ti6Al4V titanium socket head cap screws

304 stainless steel roll center and knuckle spacers

5/8" 4140 CrMo stud

FK PTFE-lined spherical bearings (F1 spec, self-cleaning)

Suitable for all uses, from daily driver to race car.

The SPL BMW F2X/F3X Front Lower Control Arms (FLCA) provide roll center, camber, and track width adjustment for the xDrive-equipped F2X/F3X BMWs while eliminating bushing deflection resulting in sharpened steering response and driving precision.

The ability to run more negative camber greatly improves the peak lateral grip available. Adding negative camber results in the tire having an optimal contact patch as the body rolls due to cornering forces. This is especially important with better tires and a must-have for anyone looking to prevent excessive outer shoulder wear (and heating) on their tires due to a lack of camber.

The lower control arms come with a ride height sensor bracket to maintain the factory ride height sensor location, regardless of length of the arm to keep those finicky BMW chassis electronics happy.

Benefits

Adjustable Camber, Roll Center, and Track Width

Eliminates Bushing Deflection

Improved Tire Life with Ideal Camber Settings

Lightweight, High-Strength Construction

Stackable 304SS Roll Center Spacers in 1/8" and 1/4" Sizes

US Made, PTFE Lined FK Rod Ends 

Materials

6061-T6 aluminum black anodized arm, clamps, and spacers

4130 CrMo electroless nickel-plated double adjuster

Ti6Al4V titanium socket head cap screws

304 stainless steel roll center and knuckle spacers

5/8" 4140 CrMo stud

FK PTFE-lined spherical bearings (F1 spec, self-cleaning)

Suitable for all uses, from daily driver to race car.

Enhance the handling of your BMW with Turner Motorsport's Performance Springs. These springs feature increased spring rates to minimize body roll, improve grip, and provide a controlled driving experience. The slight lowering reduces the center of gravity without sacrificing street usability or daily driving comfort. Dive under braking and squat under acceleration are reduced, ensuring a more responsive and controlled feel.

Key Benefits:

• Reduced body roll for improved stability.
• Minimized dive under braking.
• Enhanced grip for better handling.
• 3/4" lowering for a sportier stance.
• Preset to prevent spring sag.
• Shot-peened for stress relief.
• Earns 2 points toward your Dinan badge.

For over 35 years, Dinan has been a leader in BMW tuning, focusing on balanced performance to maintain the original driving feel. With a four-year, 50,000-mile warranty, Dinan ensures the quality and reliability of their parts. Transform your BMW into a Dinan-equipped powerhouse, celebrated with an exclusive trunk badge.

Dinan Performance Springs are matched to your BMW's chassis and suspension components to deliver better handling and looks without sacrificing ride quality. Dinan BMW springs are carefully engineered to work within your car's suspension travel and to improve suspension geometry. Spring rates are slightly stiffer than stock and dialed in to reduce bodyroll. A stiffer suspension makes the car more fun to drive and the lower ride height improves the looks by reducing wheel-fender gap.

Dinan spring specs -

• F: -3/4" (19mm)
  
• R: -1.0" (25mm)

Fitment note: When used with stock shocks the Dinan Ride Quality Kit is strongly recommended. The Kit consists of shorter and stiffer bump stops and spring perches that work better with the lowered ride height of these springs. While not explicitly required, less than favorable ride quality and handling may result without them.

For over 35 years, Dinan has been America's premier tuning company, pioneering advancements in BMW modification while retaining a focus on balanced performance that preserves the original character and driving feel that a BMW offers. When you install a Dinan part on your car, know that it's not only carefully developed and tested, but that Dinan stands behind it with a four year, 50,000-mile warranty. Dinan believes so fully in their “total package” approach that once your car has been fitted with enough of their parts, they celebrate your conversion from stock to Dinan with an exclusive trunk badge, displayed proudly by BMW enthusiasts everywhere. The springs are worth 2 points towards your Dinan badge (Ride Quality Kit is worth 1 point).

This item fits the following BMWs:
2012+ F32 BMW 435i X-Drive 440i X-Drive - Coupe

Replacing your struts and shocks? Don't forget the bushings! The rubber mounts for the shocks will go bad over time, especially if you drive hard or the roads are particularly rough. The shock mounts locate the front struts and rear shocks to the car - providing a quiet and vibration-free buffer between the road and the cabin. Shock mounts and bushings can wear out just like any other rubber part on the car. This leads to more noise and harshness reaching the chassis and may complicate your new suspension install. When installing new shocks, that is the perfect time to also replace the mounts. There is no additional time to install them, no special tools required, and doesn't take any extra time! If you re-use the original mounts you have the risk of them failing before your next shock replacement, doubling your labor costs.

Fits the following BMWs:
2014-03/2015 F22 BMW 228i 228iX M235i M235iX - vehicles without EDC
2012-03/2015 F30 BMW 320i 320iX 328i 328iX 335i 335iX - Sedan - vehicles without EDC
2014-03/2015 F34 BMW 328i 328iX 335iX - Gran Turismo - vehicles without EDC
2014-03/2015 F32 BMW 428i 428iX 435i 435iX - Coupe - vehicles without EDC
2014-03/2015 F33 BMW 428i 428iX 435i 435iX - Convertible - vehicles without EDC
2014-03/2015 F36 BMW 428iX 435iX - Gran Coupe - vehicles without EDC