AFE BMW Performance Intake Kits for BMW 4 Series F32 (2014+)

This all new Momentum sealed intake system produced up to 11hp and 15lbs. x ft. torque and outflows the factory intake by 37%. The air filter is housed in a one-piece, patent pending black roto-molded housing that keeps warm engine air out for maximum performance. This unique, one piece, housing with a built in clear sight window allows you to inspect the filter without disassembly. A C.A.D. designed intake tube was engineered to unleash all available horsepower and to fit perfectly. The kit comes complete will all necessary hardware.

Sealed Housing w/ Sight Window: A unique, one piece, sealed housing with a built in clear sight window allows you to inspect the filter with no disassembly.

Housing/Air Filter Interface: This intake system features a unique patent pending filter to housing interface which allows for an easy installation and maximizes filter size.

Horizontal Louvers: The louvers were added to the roto-molded housing to increase the cold air to the air filter.

This part fits the following BMWs:
2012-2015 F30 335ix N55
2013-2015 F31/34 335i/ix N55
2014-2016 F32/36 435i/ix N55
2012-2016 F20/21 M135i/ix N55
2014-2016 F22 M235i N55

BMW Cold Air Intake System delivers more cool air to your BMW's engine, enhancing performance and producing an aggressive yet refined turbo whistle. Designed for significant performance improvements and ease of use, this intake system offers a range of benefits.

• Dyno-Proven Gains: Increases power by up to +7 HP and torque by +14 Lbs. x Ft.
• Improved Airflow: Outflows the factory intake by 34% for better engine breathing.
• High-Performance Flow: Measures 605 CFM @ 7" H2O for efficient air delivery.
• Open-Element Design: Allows visibility of the large air filter while sealing when the hood is closed to prevent hot air ingress.
• Convenient Filter: Features a washable and reusable Pro DRY S air filter for easy maintenance.
• Easy Installation: Innovative filter-to-housing interface and minimal hardware ensure a quick and straightforward setup.

7" Tall "Oil Free" Air Filter:
This intake system utilizes an oil free, 7" tall conical 360 degree radial flow performance air filter with 3-layers of synthetic media providing maximum airflow and performance.

High Quality Tube:
This system uses a high quality, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit.

Lightweight Vacuum Form Plastic Cover w/ Auxiliary Air Inlet:
Creates a stealthy under-hood look while reducing air intake noise without sacrificing power. A urethane plug is also included if you wish to block off the auxiliary air inlet.

Hassle-Free Installation:
All clamps, coupling and hardware are included for hassle-free installation. This is a direct bolt-on kit that requires no cutting or drilling on factory parts.

DETAILS:

• 350 CFM Rating
• +12 HP / +12 lbs. x ft. Torque max gains
• Outflows factory intake
• CAD-Designed Roto-Molded Intake Tube
• Vacuum Form Cover for Stealthy Under-Hood Look
• Pro DRY S oil-free 3-Layer Synthetic Media for Maximum Convenience With Excellent Filtration Efficiency
• No Cutting or Drilling on Factory Parts for Faster Installation

Note 1:
Does NOT fit Convertible models.

Note 2:
This product is not currently CARB exempt and is not available for sale in California or for use on any vehicle registered with the California Department of Motor Vehicle.

7" Tall Air Filter:
This intake system utilizes an oil-free, 7" tall conical 360-degree radial flow performance air filter with 5-layers of progressive finer mesh cotton media providing maximum airflow and performance.

High-Quality Tube:
This system uses a high quality, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit.

Black Cover w/ Auxiliary Air Inlet:
This carbon fiber look cover is constructed with lightweight vacuumed formed ABS plastic for underhood appearance. A urethane plug is also included if you wish to block off the auxiliary air inlet.

Hassle-Free Installation:
All clamps, coupling and hardware are included for hassle-free installation. This is a direct bolt-on kit that requires no cutting or drilling on factory parts.

Note 1:
Does NOT fit Convertible models.

Note 2:
This product is not currently CARB exempt and is not available for sale in California or for use on any vehicle registered with the California Department of Motor Vehicle.

HP Gain: +13hp
Trq Gain: +13ft-lbs
Airflow: +28% over stock

aFe has engineered the Momentum GT intake to outperform the stock air box and deliver substantial power and torque gains over the factory system. The B58 3.0L Turbo benefits from aFe's oversized cotton filter element in a Rotomold plastic housing that blocks heat saturated air while flowing more volume of cooler dense air. The system has been CAD designed to achieve the maximum volumetric flow rate into the turbo. The intake tube is a smooth, unobstructed single piece from the air inlet to the airbox and incorporates a port for the air flow sensor. aFe's advanced engineering and design have made this a direct bolt-in intake upgrade.

The aFe filter has been designed specifically for this application and uses aFe's high flow/low maintenance design. The ProDry S filter has an oil-free filter media for less maintenance. For the best flowing filter, with the best performance gain, we always recommend the standard aFe Pro5R filter (which has a blue pre-oiled filter media), but this oil-free filter flows only slightly less than the blue Pro5R style aFe filter, and requires no re-oiling after cleaning the filter.

Features:

• +13 HP and +13 lbs. x ft. Torque max gains
• Outflows factory intake by up to 28%
• High Quality One-Piece Roto-Molded Sealed Housing with Auxiliary Air Scoop
• CAD-Designed Roto-Molded Intake Tube
• Lightweight high gloss, clear-coated 2 x 2 twill-weave carbon fiber trim on housing for styling
• Built-In Sight Window Provides Easy Inspection of Filter Without Disassembly
• Pro 5R oiled 5-Layer Progressively Finer Mesh Cotton Gauze Oiled Media for Maximum Performance
• Unique (Patent Pending) Filter-to-Housing Interface for Easy Installation
• No Cutting or Drilling on factory Parts for Faster Installation

7" Tall "Oil Free" Air Filter:
This intake system utilizes an oil free, 7" tall conical 360 degree radial flow performance air filter with 3-layers of synthetic media providing maximum airflow and performance.

High Quality Tube:
This system uses a high quality, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit.

Carbon Fiber Look Cover w/ Auxiliary Air Inlet:
This carbon fiber look cover is constructed with lightweight vacuumed formed ABS plastic for underhood appearance. A urethane plug is also included if you wish to block off the auxiliary air inlet.

Hassle-Free Installation:
All clamps, coupling and hardware are included for hassle-free installation. This is a direct bolt-on kit that requires no cutting or drilling on factory parts.

Note 1:
Does NOT fit Convertible models.

Note 2:
This product is not currently CARB exempt and is not available for sale in California or for use on any vehicle registered with the California Department of Motor Vehicle.