BMW Engine Parts for BMW 4 Series F32 (2014+)

Clear BMW chassis

Please ensure your correct model is selected

Turner Motorsport has everything you need to upgrade your BMW through our stages of performance or to keep your car in peak condition with our range of the latest in proven OEM cooling parts. Upgrade your cooling system and engine performance with the selections below to give your BMW a performance and reliability advantage.

Sub-Categories

Sort By:

Genuine BMW - Corporate Logo
T#:180999
Part#: 11417618941
In Stock
7% off MSRP $ 101.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 94.99 USD
Free Shipping
7% off MSRP
$ 101.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 94.99 USD
Free Shipping


Genuine BMW Guide Rail -
This item fits the following BMW Chassis:
E71,E82,E90,E92,E93,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4,F30,F32,F33,F34,F36,F80 M3,F82 M4,F83

Fits BMW Engines including:
N55,S55

Show More Show Less
1/2" Drive 45-Tooth Digital Torque Wrench
10X Entries Into Our F80 M3 Sweepstakes
Schwaben - Corporate Logo
T#:396471
Part#: 023380SCH01A
In Stock
Sale - Save 10% $ 186.99

This product was last offered at the strikethrough price on
05-03-2026

$ 168.29 USD
Free Shipping
Sale - Save 10%
$ 186.99

This product was last offered at the strikethrough price on
05-03-2026

$ 168.29 USD
Free Shipping

Looking to update your old torque wrenches? The Schwaben 3/8" Drive Digital Torque Wrench is your answer. 

This digital torque wrench uses an easy-to-read display to show torque amounts and settings, features a push button release, reversible 3/8" drive, 45 tooth ratchet head, and a comfortable no-slip grip and adjustment wheel.

Specifications:

  • Setting Range: 45-220 ft lbs (60-300 Nm)
  • Display Units: ft-lbs, N-m, Inch-lbs, cm-kg2, and m-kg
  • Size: 22" (550mm) length for easy leverage
  • Accuracy: +- 3%
  • Include blow molded holding case
  • Requires one 3V CR2030 battery (included)
Show More Show Less
Genuine BMW - Corporate Logo
T#:39957
Part#: 12517592508
In Stock
5% off MSRP $ 174.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 166.99 USD
Free Shipping
5% off MSRP
$ 174.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 166.99 USD
Free Shipping


Genuine BMW Wiring Loom, Eng., Valvetronic Servomtr -
This item fits the following BMW Chassis:
E82,E90,E92,E93,F06,F10,F12,F13,F15,F16,F22,F25 X3,F30,F32,F33,F34,F36

Fits BMW Engines including:
N55

Show More Show Less

Vargas B58 Gen 1 One Way Crankcase Breather - F Chassis B58 3.0L ...
2X Entries Into Our F80 M3 Sweepstakes
For Gen1 B58 Engines
Vargas Turbo Technologies - Corporate Logo
T#:638800
Part#: VTT-B58-BREATHER
Ships in 7 Business Days
$ 127.99 USD
Free Shipping
$ 127.99 USD
Free Shipping
VTT is happy to introduce the first and only available plug and play ONE-WAY crankcase breather kit for BMW B58 applications. With this breather simply remove your oil cap, install the breather, and instantly free up horsepower, improve turbo draining, remove crankcase pressure, all while adding a cool look to your engine bay. FITS with the engine cover on. Engine cover can be removed, and installed without removing the breather. Can be used by itself with the stock PCV system to eliminate crankcase pressure, or with any number of PCV setups, including our VTT Engine catch can for the ultimate in crankcase pressure relief. Made from 6061-T6 Aircraft aluminum anodized black for a long-lasting finish, 4 stainless steel baffles for complete oil control, a PTFE one way check ball, a high-quality filter, and clamp all work together to keep crankcase pressure where it belongs, out of your crankcase. This breather will fit all B58 Vehicles that use the most common oil fill cap design. This does NOT mean it fits all BMW vehicles. The breather sits about 2.5″ tall from the valve cover oil cap area, and the filter is 2-3/4″ in diameter NOTE: NOT ALL THE B58 MODELS LISTED HAVE THE SAME HOOD CLEARANCE, WE CANNOT SAY WHICH MODELS WILL HAVE CLEARANCE ISSUES AND WHICH WILL NOT AS WE HAVE NOT TESTED FIT ON ALL MODELS. PLEASE TEST CLOSE YOUR HOOD CAREFULLY TO ENSURE CLEARANCE. IF IT DOES NOT FIT LET US KNOW, AND WE WILL GET YOU A REFUND ONCE THE BREATHER IS RETURNED.
Show More Show Less

Genuine BMW - Corporate Logo
T#:341303
Part#: 12120039664KT
In Stock
$ 97.99 USD
Free Shipping
$ 97.99 USD
Free Shipping
Periodic spark plug replacement prevents many common problems caused by worn, contaminated plugs, including misfire, reduced power and fuel economy, and an illuminated Check Engine Light. Fresh plugs promote good engine performance and fuel economy, while reducing engine misfire that stresses and damages expensive ignition coils and catalytic converters.
Show More Show Less
Genuine BMW - Corporate Logo
T#:35064
Part#: 11417590736
In Stock
$ 152.20 USD
Free Shipping
$ 152.20 USD
Free Shipping


Genuine BMW Suction Pipe -
This item fits the following BMW Chassis:
E82,E90,E92,E93,F22,F30,F32,F33,F36

Fits BMW Engines including:
N55


MMX Performance - Corporate Logo
T#:19891361
Part#: MMR20-1004
Ships in 2 Business Days
$ 1,064.99 USD
Free Shipping
$ 1,064.99 USD
Free Shipping
Both the N55 and S55 engines are plagued by the same issue when chasing high horsepower numbers... the dreaded crankhub failure. Fortunately MMR Performance has released an upgraded version of their already stout single-piece crankhub, but this time offering a 4-pin dowelled location that locks onto the front of the crankshaft. This configuration eliminates the multi-piece crankhub with friction discs in favor of a more robust single piece crankhub. Recommended for high-powered cars over 700 Horsepower
Show More Show Less
Iwis - Corporate Logo
T#:36981080
Part#: 90001301
In Stock
$ 314.36

This product was last offered at the strikethrough price on
05-04-2026

$ 304.83 USD
Free Shipping
$ 304.83 USD
Free Shipping
Prevent costly failure with this IWIS Engine Oil Pump Chain Kit! This kit contains all of the basic items needed to service your oil pump drive system and prevent failure long before it occurs. Chains can stretch and chain guides and tensioners can wear out, leading to the chain skipping teeth. This prevents the oil pump from being driven at the proper speeds. If not addressed, the chain could begin to "slip" over the gears, failing to drive the oil pump. When this occurs, oil pressure will drop suddenly, failing to properly lubricate sensitive internal engine components such as main bearings, rod bearings, and camshaft ledges and lobes, resulting in severe scoring and eventual engine failure.
Show More Show Less

MMX Performance - Corporate Logo
T#:4565831
Part#: MMR17-0501FK
Ships in 6 Business Days
$ 476.99 USD
Free Shipping
$ 476.99 USD
Free Shipping
Higher mileage engines and especially ones with direct-injection are prone to carbon build-up on the backs of the inlet valves. However, when deposits are removed by the catch can's filter and separation process, the intake air receives less oil and more oxygen, resulting in a cleaner, more reliable, and better performing engine. MMR's Performance catch can kit For N55 powered M235i's and M2's was designed to help owners ensure their engines are running at optimum performance This is done by removing unwanted oil from the PCV system before it can get back into the intake. The T-6061 billet filter housing, anodized in the trademark MMR finish, comes with a billet bracket for easy installation, including all hoses and fittings necessary for installation. The catch can kit has been designed to offer added performance, allow easy installation and enhanced aesthetics too. Checking the level for any oil removed from the intake system is easy thanks to the integral dipstick. A cap-head bolt mounted in the lower section of the catch can allows for easy draining, or if you prefer, the lower section itself can be easily unscrewed and removed. Features: Effectively prevents oil build-up in the intake system and intercooler walls Maintains optimum engine performance Easy installation with all supplied hardware included Race fittings and PTFE-lined hoses throughout Easy oil level checking and draining
Show More Show Less

Bosch - Corporate Logo
T#:384616
Part#: 11787589122
In Stock
$ 168.99

This product was last offered at the strikethrough price on
05-07-2026

$ 111.99 USD
Free Shipping
$ 111.99 USD
Free Shipping

A new oxygen sensor can improve driveability and lengthen engine life. Ultimately, you achieve a smoother running engine that is more fuel efficient. Feedback from the oxygen sensor provides closed-loop control of the injected quantity of fuel for optimum air-fuel mixture, enabling virtually complete combustion to take place. Contaminants in gas and certain atmospheric conditions can drastically shorten the life of any oxygen sensor, therefore they should be checked with every periodic maintenance and changed if necessary.

This is the OEM Bosch oxygen sensor for BMW's with the N20 and N26 motors. This sensor is mounted in the catalytic converter in the rear most position. OEM replacement for BMW # 11787589122.

Bosch is one of the largest OEM producers of Genuine BMW and aftermarket parts in the world, providing parts for almost every major automotive manufacturer. Bosch has likely supplied many of the original electrical (and mechanical) parts for your BMW. Thanks to their quality, high durability, and reliability, you should expect a long service life from Bosch products.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Fits the following BMWs:
All models with the N20 or N26 motor

Show More Show Less
Vargas Turbo Technologies - Corporate Logo
T#:18733531
Part#: VTT-CRANKHUB-5
Ships in 10 Business Days
$ 880.99 USD
Free Shipping
$ 880.99 USD
Free Shipping
Under certain conditions, the N55 crank hub likes to spin, without warning and even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and ECS are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution.
Show More Show Less
Genuine BMW - Corporate Logo
T#:527170
Part#: 12638638551
Ships in 1 day
2% off MSRP $ 166.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 162.99 USD
Free Shipping
2% off MSRP
$ 166.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 162.99 USD
Free Shipping


Genuine BMW - Corporate Logo
T#:42221
Part#: 13537576776
Ships in 1 day
4% off MSRP $ 116.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 111.99 USD
Free Shipping
4% off MSRP
$ 116.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 111.99 USD
Free Shipping


Genuine BMW High Pressure Pipe -
This item fits the following BMW Chassis:
E71,E82,E90,E92,E93,F06,F10,F12,F13,F25 X3,F26 X4,F30,F34

Fits BMW Engines including:
N55

Show More Show Less
Genuine BMW - Corporate Logo
T#:542583
Part#: 11368696446
Ships in 1 day
13% off MSRP $ 223.19

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 193.83 USD
Free Shipping
13% off MSRP
$ 223.19

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 193.83 USD
Free Shipping

Turner Motorsport Genuine BMW Vanos Central Valve (Long)

Introducing the Genuine BMW Vanos Central Valve (Long) by Turner Motorsport, the perfect replacement for the VANOS central valve located within the VANOS sprockets. This authentic BMW part guarantees precise fitment and dependable performance.

Benefits:

  • Genuine BMW quality assurance
  • Direct replacement for VANOS central valve
  • Ensures optimal VANOS system functionality

Upgrade your BMW's VANOS system with the Turner Motorsport Genuine BMW Vanos Central Valve (Long) for lasting performance.

Show More Show Less
Paradigm Engineering - Corporate Logo
T#:5269537
Part#: OILCAPNXXS55RED
Ships in 4 Business Days
$ 99.99 USD
Free Shipping
$ 99.99 USD
Free Shipping
Paradigm Engineering’s magnetic oil filter cap augments your vehicle's oil filtration system and serves as a diagnostic tool. Each oil filter cap is CNC milled from a solid block of billet aluminum and fitted with a Samarium-Cobalt rare earth magnet. This magnet is in direct contact with pre-filtered oil, as a result, the magnet will naturally capture Ferrous particles within your engine oil. Ferrous particles in engine oil cause premature wear, obstruct the paper oil filter, and could be an indication of a serious issue within your engine.
Show More Show Less

Genuine BMW - Corporate Logo
T#:177725
Part#: 61119307555
Ships in 1 day
5% off MSRP $ 371.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 354.99 USD
Free Shipping
5% off MSRP
$ 371.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 354.99 USD
Free Shipping


Genuine BMW Wiring Harness For Eps -
This item fits the following BMW Chassis:
F30,F32,F33,F34


Genuine BMW - Corporate Logo
T#:14966
Part#: 13627566786
In Stock
9% off MSRP $ 173.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 158.99 USD
Free Shipping
9% off MSRP
$ 173.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 158.99 USD
Free Shipping


Genuine BMW Ping Sensor
This item fits the following BMW Chassis:
E82 1M Coupe,E71 X6,E82,E89 Z4,E90,E92,E93,F01,F02,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4 X4,F30,F32,F33,F34,F36,F80 M3,F82 M4,F83

Fits BMW Engines including:
N54,N54T,N55,S55

Show More Show Less
Genuine BMW - Corporate Logo
T#:42256
Part#: 13537620946
Ships in 1 day
9% off MSRP $ 122.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 111.99 USD
Free Shipping
9% off MSRP
$ 122.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 111.99 USD
Free Shipping
Genuine BMW Sensor, High-Pressure

Hella - Corporate Logo
T#:592990
Part#: 12618638755
In Stock
$ 104.99

This product was last offered at the strikethrough price on
07-14-2026

$ 85.99 USD
Free Shipping
$ 85.99 USD
Free Shipping
Mounted on the bottom of the oil pan
Genuine BMW - Corporate Logo
T#:194083
Part#: 11137586555
Ships in 1 day
4% off MSRP $ 1,025.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 979.99 USD
Free Shipping
4% off MSRP
$ 1,025.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 979.99 USD
Free Shipping


Genuine BMW Oil Pan -
This item fits the following BMW Chassis:
F22,F30,F32,F33,F36

Fits BMW Engines including:
N55


Febi - Corporate Logo
T#:587397
Part#: 11288570439
Ships in 6 Business Days
$ 140.99

This product was last offered at the strikethrough price on
05-07-2026

$ 120.99 USD
Free Shipping
$ 120.99 USD
Free Shipping
Accessory belt tensioners provide tension to the belt drive system, ensuring the belt is able to properly turn engine accessories without slipping. If your tensioner has failed, replace it with a brand-new unit to ensure proper water pump and alternator functionality.
Show More Show Less

Genuine BMW - Corporate Logo
T#:46619
Part#: 17217628058
Back Ordered
$ 250.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 194.99 USD
Free Shipping
$ 194.99 USD
Free Shipping


Genuine BMW Heat Exchanger For Engine Oil -
This item fits the following BMW Chassis:
F22,F30,F32

Fits BMW Engines including:
N55

Burger Motorsports - Corporate Logo
T#:600275
Part#: BCC-B58
Ships in 1 Business Day
$ 199.00 USD
Free Shipping
$ 199.00 USD
Free Shipping
It's no secret that F Chassis B58 BMW turbo motors can suffer from oil control problems causing oil to blow through and coat the intercooler and charge piping, gunking up intake valves and the VANOS system, lowering the effective octane, and generally degrading engine performance. The higher your boost levels the more apparent these problems become. The solution to this problem has finally arrived. The BMS oil catch can. While there are other catch cans on the market they all fall short in various areas. Some are mounted on the hot/turbo side of the motor preventing proper vapor condensation. Others utilize hoses that are too small and runs that are too long to allow proper PCV ventilation causing internal motor/ring sealing issues. Some have insufficient or no internal baffle system while others have internal baffle systems that are too restrictive. Some even bypass the PCV system all together venting crankcase gas and odor to atmosphere. Most are simply repackaged oil catch cans from smaller / lower power motors shoehorned in to place in the turbo BMW engine bay. To solve these problems BMS designed their oil catch can kit from the ground up specifically for the the turbo BMW application. It features 100% CNC machining with zero welding for a precision fit and long life. The can itself is guaranteed for the life of the vehicle. The hoses exceed the OEM PCV piping in diameter and that flow rate is maintained throughout the entire oil catch can ensuring no excessive crankcase pressure buildup. The BMS OCC retains the factory fully closed loop PCV operation preventing any PCV vapor from leaking to atmosphere. The mounting locations are selected to minimize the line length, allow more efficient operation, and retain a stealth look. Install takes around 20 minutes, includes all required hardware, and is 100% reversible. Simply unscrew the base of the can or use the drain plug to safely dispose of captured oil with the rest of your used motor oil during oil changes. Made in USA. FEATURES AND BENEFITS Increases Air Intake Efficiency Promotes Engine Longevity Non-Clogging Air/Oil Separation Triple Baffle Free Flow Solid No Restriction Design Retains factory fully closed loop PCV operation Large Intake/Outlet No Tapering Down Stealth Mounting on Cool Side of the Motor Anodized Black Aluminum N54 Model Mounts Out of Sight Under the Cowl Made in USA & Guaranteed for Life Simply unscrew base every 3-6 months to empty or use the 1/8th NPT drain plug. Non-Clogging, No Service Needed Air/Oil Separation Triple Baffle High flow to eliminate crankcase pressure caused by more restrictive designs Large 16mm+ inlet and outlet exceeds OEM PCV sizing Precision CNC Machined from Solid Blocks of High Grade Aluminum DIMENSIONS Can dimensions with lid: 4.4" (111mm) Tall Can Diameter: 2.7" (68.5mm) Lid Length: Back to nozzle end: 4" (101mm) Nozzle Outer Diameter: .75" (19.2mm) Nozzle Inner Diameter: 0.669" (17mm) Can Capacity: 2.5 oz (74 ml)
Show More Show Less
Burger Motorsports - Corporate Logo
T#:5567060
Part#: OCCN55-F3X
Back Ordered
$ 199.00 USD
Free Shipping
$ 199.00 USD
Free Shipping
It's no secret that BMW turbo motors can suffer from oil control problems causing oil to blow through and coat the intercooler and charge piping, gunking up intake valves and the VANOS system, lowering the effective octane, and generally degrading engine performance. The higher your boost levels the more apparent these problems become. The solution to this problem has finally arrived. The BMS oil catch can. While there are other catch cans on the market they all fall short in various areas. Some are mounted on the hot/turbo side of the motor preventing proper vapor condensation. Others utilize hoses that are too small and runs that are too long to allow proper PCV ventilation causing internal motor/ring sealing issues. Some have insufficient or no internal baffle system while others have internal baffles systems that are too restrictive. Some even bypass the PCV system all together venting crankcase gas and odor to the atmosphere. Most are simply repackaged oil catch cans from smaller / lower power motors shoehorned into place in the turbo BMW engine bay. To solve these problems BMS designed their oil catch can kit from the ground up specifically for the turbo BMW application. It features 100% CNC machining with zero welding for a precision fit and long life. The can itself is guaranteed for the life of the vehicle. The hoses exceed the OEM PCV piping in diameter and that flow rate is maintained throughout the entire oil catch can ensuring no excessive crankcase pressure buildup. The BMS OCC retains the factory fully closed loop PCV operation preventing any PCV vapor from leaking to the atmosphere. The mounting locations are selected to minimize the line length, allow more efficient operation, and retain a stealth look. Install takes around 20 minutes, includes all required hardware, and is 100% reversible. Simply unscrew the base of the can or use the drain plug to safely dispose of captured oil with the rest of your used motor oil during oil changes. Made in USA. FEATURES AND BENEFITS Increases Air Intake Efficiency Promotes Engine Longevity Non-Clogging Air/Oil Separation Double Baffle Large 16mm+ inlet and outlet exceeds OEM PCV sizing Free Flow Solid No Restriction Design Retains factory fully closed loop PCV operation Large Intake/Outlet No Tapering Down Stealth Mounting on Cool Side of the Motor Anodized Black Aluminum N54 Model Mounts Out of Sight Under the Cowl Made in USA & Guaranteed for Life Non-Clogging, No Service Needed Air/Oil Separation Double Baffle High flow to eliminate crankcase pressure caused by more restrictive designs Precision CNC Machined from Solid Blocks of High Grade Aluminum DIMENSIONS Can dimensions with lid: 4.4" (111mm) Tall Can Diameter: 2.7" (68.5mm) Lid Length: Back to nozzle end: 4" (101mm) Nozzle Outer Diameter: .75" (19.2mm) Nozzle Inner Diameter: 0.669" (17mm) Can Capacity: 2.5 oz (74 ml)
Show More Show Less


Mishimoto - Corporate Logo
T#:372557
Part#: MMOCCCF
In Stock
$ 162.99 USD
Free Shipping
$ 162.99 USD
Free Shipping
Universal kit with a catch can and rubber hose; for retrofitting on a variety of vehicles. Carbon fiber catch can prevents a harmful buildup of oil inside of the turbocharger, intake manifold, intercooler and piping. Separates oil particles from PCV/CCV air Defends intercooler, intake system, and essential components from oil blow-by Made from lightweight carbon fiber Compact design makes for easy engine bay placement Checking fluid levels made easy with built in sight tube Comes complete with mounting bracket, hose, all necessary clamps, fittings, and mounting hardware Mishimoto Lifetime Warranty WARNING! Prop 65 may apply to this product. Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968) is a California law that applies to call companies selling products in California. Prop 65 requires any listed chemical present above very low levels that are known to cause cancer, birth defects, or other reproductive harm. For more information about California Prop 65 warning see: www.P65Warnings.ca.gov.
Show More Show Less
Genuine BMW - Corporate Logo
T#:376798
Part#: 13537577649KT
In Stock
$ 174.99 USD
Free Shipping
$ 174.99 USD
Free Shipping
Genuine BMW - Corporate Logo
T#:191331
Part#: 13527797905
In Stock
6% off MSRP $ 102.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 96.99 USD
Free Shipping
6% off MSRP
$ 102.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 96.99 USD
Free Shipping
The guide rails in your timing set keep everything tracking properly. Because it is made out of a plastic-like material, years of abrasion can wear parts of it away. This can cause the chain can to become slightly loose and cause a chain 'slap' or rattle noise. Replace your damaged timing chain tensioner and guide rails to keep timing chain noise to a minimum. Located on the outside of the timing chain guide that keeps tension on the chain.
Show More Show Less

Genuine BMW - Corporate Logo
T#:338000
Part#: 12120039664
In Stock
Starting at $ 97.99 USD
Free Shipping
Starting at $ 97.99 USD
Free Shipping
Standard replacement Genuine BMW NGK Spark plug for all N20 & N26 4 cylinder turbo engines. Sold as a set of four.

This item fits the following BMWs:
2012+ F10 BMW 528i 528i xDrive
2014+ F22 BMW 228i 228i xDrive
2014+ F23 BMW 228i 228i xDrive
2013+ F25 BMW X3 xDrive28i
2015+ F26 BMW X4 xDrive28i
2012+ F30 BMW 320i 320i xDrive 328i 328i xDrive - Sedan
2013+ F31 BMW 328i xDrive - Wagon
2013+ F32 BMW 428i 428i xDrive - Coupe
2013+ F33 BMW 428i Convertible 428i xDrive Convertible - Convertible
2014+ F34 BMW 328i xDrive GT - Gran Tourismo
2014+ F36 BMW 428i Gran Coupe 428i xDrive Gran Coupe
2013+ E84 BMW X1 sDrive28i X1 xDrive28i
2009+ E89 BMW Z4 sDrive28i
Show More Show Less

Genuine BMW - Corporate Logo
T#:31531
Part#: 11127594344
In Stock
4% off MSRP $ 190.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 182.99 USD
Free Shipping
4% off MSRP
$ 190.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 182.99 USD
Free Shipping


Genuine BMW Ignition Coil Covering -
This item fits the following BMW Chassis:
F10,F30,F31,F32,F33,F34

Fits BMW Engines including:
N20

Bosch - Corporate Logo
T#:372884
Part#: 15733
In Stock
$ 74.99 USD
Free Shipping
$ 74.99 USD
Free Shipping
Bosch Universal Oxygen Sensors are perfect for replacing faulty sensors throwing off a check engine lights and causing poor operation and low gas mileage. If you are looking for a cheaper option or are unable to get a hold of the sensor you need, you can reuse part of the original wiring harness to connect this high quality replacement.
Show More Show Less

Genuine BMW - Corporate Logo
T#:22444
Part#: 13627595860
Ships in 1 day
8% off MSRP $ 131.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 120.99 USD
Free Shipping
8% off MSRP
$ 131.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 120.99 USD
Free Shipping
This is the crankshaft position sensor. It provides information for the ECU. A faulty sensor can cause issues with timing adjustment and limit performance and vehicle operation. Replace your sensor with a high-quality Hitachi sensor to restore peak performance.
Show More Show Less
Mann - Corporate Logo
T#:369102
Part#: 11427566327
In Stock
$ 142.99

This product was last offered at the strikethrough price on
08-13-2026

$ 111.99 USD
Free Shipping
$ 111.99 USD
Free Shipping
Stock up on oil filters and save some cash! You are going to need them, why not get a discount? This is an OEM Mann oil filter kit made with the same materials and design as the original oil filter used in BMW dealers (but at a better price!). The kit includes the oil filter, housing cap o-ring, and washer.
Show More Show Less

Genuine BMW - Corporate Logo
T#:522775
Part#: 11127611278
In Stock
$ 449.98 USD
Free Shipping
$ 449.98 USD
Free Shipping
If your valve cover is leaking, warped, or cracked, we recommend replacing it with a brand new cover to prevent oil loss, vacuum issues, or check engine lights. This valve cover includes the mounting hardware and gasket necessary for installation, making the replacement process easy and simple.
Show More Show Less

Genuine BMW - Corporate Logo
T#:34026
Part#: 11317523884
In Stock
9% off MSRP $ 101.13

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 92.15 USD
Free Shipping
9% off MSRP
$ 101.13

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 92.15 USD
Free Shipping


Genuine BMW Guide Rail
This item fits the following BMW Chassis:
E82 1M Coupe,E70 X5,E71 X6,E82,E83 X3,E85 Z4,E86 Z4,E89 Z4,E90,E92,E93,F01,F02,F06,F10,F12,F13,F25 X3

Fits BMW Engines including:
N51,N51,N52,N52N,N54,N54T,N55

Show More Show Less
Genuine BMW - Corporate Logo
T#:207105
Part#: 13627633958
In Stock
7% off MSRP $ 134.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 124.99 USD
Free Shipping
7% off MSRP
$ 134.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 124.99 USD
Free Shipping
Camshaft position sensors are electrical sensors that monitor the rotational speed and position of a camshaft. This signal is used by the DME to control fuel delivery and spark timing. If your camshaft position sensor is faulty, it can result in check engine lights, rough idle or running conditions, limp mode, or no starts. Replace your cam position sensor with this high-quality replacement to restore smooth engine operation.
Show More Show Less
Genuine BMW - Corporate Logo
T#:35073
Part#: 11417622768
In Stock
2% off MSRP $ 213.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 208.99 USD
Free Shipping
2% off MSRP
$ 213.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 208.99 USD
Free Shipping


Genuine BMW Hydraulic Valve -
This item fits the following BMW Chassis:
E71,E82,E89 Z4,E90,E92,E93,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4,F30,F31,F32,F33,F34,F36

Fits BMW Engines including:
N20,N26,N55

Show More Show Less


ECS - Corporate Logo
T#:392750
Part#: 017306ECS01
In Stock
Sale - Save 15% $ 152.99

This product was last offered at the strikethrough price on
06-13-2026

$ 130.04 USD
Free Shipping
Sale - Save 15%
$ 152.99

This product was last offered at the strikethrough price on
06-13-2026

$ 130.04 USD
Free Shipping

BMW uses a lot of plastic in their engine components to save weight and money. Unfortunately, plastic is damaged easily and the factory oil filter cap needs a special tool to remove. This cap is designed to use the original o-ring seal so no special parts are required. You only have to remove the original 'filter cage' from the original cap and transfer it to the new aluminum cap. The satin black anodize blends in with the rest of your engine bay making this a smart and subtle upgrade.

 

Here is a link to the original Genuine BMW oil filter cap if you are looking for that instead.

Show More Show Less
Mitsubishi Turbocharger - Corporate Logo
T#:583736
Part#: 11657642469
In Stock
$ 1,329.99 USD
Free Shipping
$ 1,329.99 USD
Free Shipping

For vehicles with an electronic wastegate.

This is a replacement turbocharger for your BMW. Signs of a failing turbo include unusual oil consumption, smoking, increased turbo lag, failure to hold boost, or the vehicle going into "limp mode". To restore the performance of your BMW, be sure to replace any failing turbocharger.

Show More Show Less
Genuine BMW Deflection Pulley
For vehicles with a production date up to 03/2016
Genuine BMW - Corporate Logo
T#:391246
Part#: 11288673720
In Stock
8% off MSRP $ 82.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 75.99 USD
Free Shipping
8% off MSRP
$ 82.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 75.99 USD
Free Shipping

 


Genuine BMW Deflection Pulley -
This item fits the following BMW Chassis:
E71,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4,F30,F32,F33,F34,F36,F80 M3,F82 M4,F83

Fits BMW Engines including:
N55,S55

Show More Show Less

Bosch - Factory Spec Ignition Service Kit - N55
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:556734
Part#: N55TISKT
In Stock
$ 276.99 USD
Free Shipping
$ 276.99 USD
Free Shipping

Often an oversight in maintenance, ignition components are also susceptible to wear and tear. Spark Plugs can accumulate carbon, reducing the spark intensity and it's ability to properly ignite the air/fuel mixture, leading to misfires and generally declining performance. Other ignition components, such as coils, boots, wires, caps, and rotors, can also wear out over time due to factors like heat and contamination, preventing the current from reaching the spark plug.

To start over fresh with all new components, we now offer these Ignition Service Kits. Each kit comes with brand new OE quality components, replacing any potential fault points in your ignition system for peak performance!

See kit contents below for a complete list of included components.

Show More Show Less

Genuine BMW Fuel Tank Ventilation Valve
For vehicles with an Auto or Sport Auto transmission only
For vehicles with a production date from 04/2012
Genuine BMW - Corporate Logo
T#:43825
Part#: 13907636156
In Stock
2% off MSRP $ 143.27

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 140.99 USD
Free Shipping
2% off MSRP
$ 143.27

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 140.99 USD
Free Shipping
This part has been superseded to BMW Part 13902366609
DeatschWerks Performance Fuel Injector Set - 50lb/hr(550cc)
For Custom Applications - Will require additional tuning or modifications. NOT DIRECT DROP IN!
DeatschWerks - Corporate Logo
T#:6151339
Part#: 16U-00-0050-6
In Stock
$ 403.99

This product was last offered at the strikethrough price on
06-03-2026

$ 369.99 USD
Limited Qty Sale
Free Shipping
$ 403.99

This product was last offered at the strikethrough price on
06-03-2026

$ 369.99 USD
Limited Qty Sale
Free Shipping
DeatschWerks was founded in 2004 in Oklahoma and has dedicated themselves to providing high quality EFI applications to a wide variety of manufacturers. DW has developed a wide variety of innovative fuel system components including fuel pumps, modular surge tanks, conversion fuel rails, dual-stage fuel filters, and ethanol compatible fuel pressure regulators. All DeatschWerks high flow fuel injectors are built using only quality OEM cores. In addition, each set is balanced to within a 2% flow variation. This means better fitment, easier tuning, and increased reliability. Full set of 6 50lb/hr 550cc injectors. All relevant tuning data available on DeatschWerks website.
Show More Show Less

OEM Ignition Service Kit - N20 2.0L
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:556723
Part#: N20TISKT
In Stock
$ 218.60 USD
Free Shipping
$ 218.60 USD
Free Shipping

Often an oversight in maintenance, ignition components are also susceptible to wear and tear. Spark Plugs can accumulate carbon, reducing the spark intensity and it's ability to properly ignite the air/fuel mixture, leading to misfires and generally declining performance. Other ignition components, such as coils, boots, wires, caps, and rotors, can also wear out over time due to factors like heat and contamination, preventing the current from reaching the spark plug.

To start over fresh with all new components, we now offer these Ignition Service Kits. Each kit comes with brand new OE quality components, replacing any potential fault points in your ignition system for peak performance!

See kit contents below for a complete list of included components.

Show More Show Less
ECS N55 Baffled Oil Catch Can System - F30 335 N55
10X Entries Into Our F80 M3 Sweepstakes
ECS - Corporate Logo
T#:557074
Part#: 003779ECS05AKT
In Stock
Sale - Save 10% $ 387.99

This product was last offered at the strikethrough price on
06-14-2026

$ 349.19 USD
Free Shipping
Sale - Save 10%
$ 387.99

This product was last offered at the strikethrough price on
06-14-2026

$ 349.19 USD
Free Shipping

There are a few reason having a catch can is an upgrade for a vehicle, from a separator system that no longer works to one that was never there. Modern day emissions regulations require the use of a closed crankcase ventilation (PCV) system to recirculate combustion blow-by gases from the crankcase back in to the intake to be burned.  Unfortunately, these blow by gases contain water vapor (which is a byproduct of combustion) and pick up oil mist from and the windage cloud and cam lubrication system as they travel through the crank case.  Due to less than 100% effective air/oil separation in the stock PCV system, some oil mist and water vapor gets carried back to the intake tract and over time cause oil deposits and carbon buildup in the intake manifold, intake ports, and on the back of intake valves.  All will eventually lead to poor performance and reduced fuel economy, and the presence oil mist can in the intake charge even increase the risk of engine damaging detonation. 

 The catch can utilizes a strategically designed 4 chamber baffle plate system engineered to create multiple changes in the direction of airflow to cause oil droplets to fall out of suspension, maximizing the efficiency of the PCV air/oil separation.  A dipstick is integrated into the cap so you can monitor the oil level, and the can is easily serviced.  At each oil change simply unscrew the canister and empty the trapped oil with your regular used oil.  The ECS Tuning Oil Catch Can is CNC machined from billet 6061-T6 aluminum and with a stealthy black anodized finish for lasting durability and appearance, and includes everything needed for an OEM-like fully reversible installation. 

The black anodized aluminum mounting bracket places the catch can in a location that looks like it should be there from the factory as well as pre-formed silicone hoses for a clean installation.

**Click here if you would rather build your kit using the Turner catch can & drain system**

*Modification is required to maintain installation of the OE engine cover, this is outlined in the installation PDF.

* The baffle system is designed to direct the flow clock-wise or counter clock-wise depending on your setup (each can can be adjusted to flow in either direction). 

Features:

  • 6061-T6 billet machined body, anodized black for lasting protection and appearance
  • Strategically positioned 4 chamber baffle system maximizes oil / air separation 
  • Knurled and black anodized oil dipstick makes inspecting oil volume of reservoir clean and simple
  • Sealed with a pre-installed viton O-Ring
  • Includes 2.5mm allen key to remove baffle plates for cleaning
  • Engineered to create multiple changes in the direction of airflow within the separator to cause oil droplets to fall out of suspension before exiting the catch can
  • Closed / recirculated design reduces oil ingestion and promotes cleaner emissions and odor-less operation
Show More Show Less

NOCO - Corporate Logo
T#:641108
Part#: GB40
In Stock
20% off MSRP $ 124.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 99.99 USD
Free Shipping
20% off MSRP
$ 124.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 99.99 USD
Free Shipping

The GB40 is a compact lithium-ion battery jump starter pack capable of delivering 1,000 amps, allowing you to jump-start a dead battery within seconds. Equipped with patented safety technology, it ensures spark-proof connections and reverse polarity protection, making it user-friendly and safe for everyone. Not only does it serve as a powerful battery booster, but it also functions as a portable power source for charging USB devices such as smartphones and tablets. Designed to support vehicles like cars, boats, RVs, trucks, and more, it can handle gas engines up to 6 liters and diesel engines up to 3 liters.



Features:

  • Compact, yet powerful lithium jump starter rated at 1,000 Amps - up to 20 jump starts on a single charge.
  • An ultra-safe and mistake-proof design with spark-proof technology and reverse polarity protection, which allow it to safely connect to any battery.
  • An ultra-bright 100 lumen LED flashlight with 7 light modes, including SOS and emergency strobe.
  • Recharge your personal devices on the go, like smartphones, tablets, e-watches and more - up to 4 smartphone recharges.
  • Designed for gas engines up to 6 Liters and diesel engines up to 3 Liters for cars, boats, lawn mowers and more.


WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

Show More Show Less

NOCO - Corporate Logo
T#:2498430
Part#: GBX75
Ships in 8 Business Days
22% off MSRP $ 319.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 249.99 USD
Free Shipping
22% off MSRP
$ 319.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 249.99 USD
Free Shipping

The NOCO Boost X GBX75 is a portable lithium jump starter crafted for 12-volt batteries in vehicles with gasoline engines up to 8.5 liters and diesel engines up to 6.5 liters. This versatile tool is suitable for a wide array of vehicles, including cars, motorcycles, trucks, ATVs, boats, RVs, vans, SUVs, tractors, and more. Featuring an all-new design, the GBX75 offers extreme jump-starting power, ensuring robust engine starts with ease. With a rating of 2500 amps, this portable lithium car battery jump starter delivers maximum energy with each start. It's not just an upgrade; it's part of our new Extreme Series, delivering exceptional performance and reliability.


Features:

  • Equipped with USB-C technology that, combined with power delivery, gives you lightning-fast recharges. Completely recharges in just 1.8-hours, or go from 0% to jump starting in just 5-minutes of charge.
  • Charge everything with USB-C Power Delivery. Its internal power bank provides 60-watts of power - both in and out - to effortlessly power your favorite USB-C devices, like phones, tablets, laptops, wearables, and more.
  • We took our UltraSafe technology and made it better. It's still our simple, mistake-free design featuring spark-proof technology and reverse polarity protection, but with enhanced thermal efficiency and power management to provide better performance and longer battery life.
  • It's one of the most versatile lithium jump starters ever. Jump start all vehicle types, including cars, motorcycles, trucks, ATVs, boats, RVs, vans, SUVs, tractors, and more for up to 8.5-liter gasoline and 6.5-liter diesel engines.


WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

Show More Show Less
Evolution Racewerks - Corporate Logo
T#:587528
Part#: BM-ICP019-T3
Ships on Oct 19, 2026
$ 359.99 USD
Free Shipping
$ 359.99 USD
Free Shipping
The factory charge pipes are made of plastic, which is fine for stock boost levels but does not hold up well under higher boost levels. The solution is to replace that plastic piece with a hard aluminum one from Evolution Racewerks. 6061 high-grade aluminum not only stands up to whatever you can throw at it, but it looks great at the same time. Don't risk detonating that 400.00 plastic pipe from BMW. Swap yours out and avoid the headache of needing to call a tow-truck or drive home in limp. Features: Increase throttle response and decreases turbo lag. Lightweight High Grade 6061 Aluminum Piping. Replaces the factory soft plastic charge pipe that is prone to breaking under high boost. Retains factory-style o-ring c-clip lock flange. Precision CNC machined MAP sensor and IAT flanges ensure a leak-free connection. Charge Pipe features beaded ends and T-bolt clamps to prevent intercooler piping from coming off from boost. Silicone Hump Hose included. Type III Hard Black Anodizing (for stealth and OEM look). Hard anodizing helps improve the durability of intercooler piping. Resists bent or dented piping. Compatible with the factory electronic diverter valve. Includes all hardware for a complete installation. Limited Lifetime Warranty.
Show More Show Less
ARP - Corporate Logo
T#:1105898
Part#: 201-4701
In Stock at Vendor
20% off MSRP $ 459.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 367.99 USD
Free Shipping
20% off MSRP
$ 459.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 367.99 USD
Free Shipping
For engine builders crafting a high-performance powerhouse, the ARP Cylinder Head Stud Kit is the industry-standard choice for reliability and strength. Each kit features studs, nuts, and washers manufactured from ARP’s proprietary ARP2000 alloy, a material rated far superior to standard aircraft-quality steels.
Show More Show Less


Pure Turbos N20 Stage 2 Turbo Upgrade - BMW N20 2.0L w/ EWG
For vehicles with electronic waste gate (EWG)
Pure Turbos - Corporate Logo
T#:578233
Part#: PURE-N20-0002KT
Ships in 7 Business Days
$ 2,590.99

This product was last offered at the strikethrough price on
07-12-2026

$ 2,495.00 USD
Free Shipping
$ 2,495.00 USD
Free Shipping
As BMW enthusiasts, we admittedly did not know how to feel when BMW moved to forced induction. We loved the naturally aspirated power that the NA straight-six produced, but Pure Turbos have been able to prove time and time again what a forced induction BMW powerplant is capable of putting down. Here at Turner Motorsport, we trust Pure Turbos to meet all of your power desires - after all, there's a reason the majority of the fastest forced induction BMWs on the road are running Pure Turbos. With Pure Turbos' Stage 2 upgrade, the BMW N20 two-liter is capable of 400whp or more with just a few additional supporting modifications!
Show More Show Less
High Pressure Fuel Pump Replacement Kit
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:5389771
Part#: N55HPFKKT
In Stock
$ 1,783.99

This product was last offered at the strikethrough price on
07-06-2026

$ 1,743.99 USD
Free Shipping
$ 1,743.99 USD
Free Shipping
HPFP woes? Replacement high pressure exchange pump for the N55 engine. Kit includes: Remanufactured High-pressure fuel pump Intake manifold gasket sets Throttle body gasket High pressure fuel sensor No core charge required!
Show More Show Less