BMW Engine Parts for BMW 4 Series F32 (2014+)

Timing Chain - Lower

T#:535787

Part#: 13528648731

Ships in 1 day

13% off MSRP $ 104.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 90.99 USD

Add to Wish List

Qty

13% off MSRP

$ 104.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 90.99 USD

Add to Wish List

The timing chain in any vehicle can begin to stretch and rattle over time. If you need only the timing chain instead of a kit. This is a direct fit replacement for any broken or stretched chain. A great replacement to a damaged chain or one that may have been misplaced out of a timing chain kit.

Show More Show Less

CTA Tools BMW Flywheel Holder - N20/N26 2.0L

T#:584148

Part#: CTA2801

In Stock

$ 80.57 USD

Add to Wish List

Qty

$ 80.57 USD

Add to Wish List

Used for securing the crankshaft with the transmission installed(connected to engine)

Genuine BMW Engine Mount - Right

T#:49435

Part#: 22116855456

Ships in 1 day

6% off MSRP $ 186.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 174.99 USD

Add to Wish List

Qty

6% off MSRP

$ 186.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 174.99 USD

Add to Wish List

Genuine BMW Rubber Mounting Right -
This item fits the following BMW Chassis:
F22,F30,F31,F32,F33,F34,F36

Oil Pressure Sending Unit

T#:190771

Part#: 12618613333

In Stock

9% off MSRP $ 88.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 80.99 USD

Add to Wish List

Qty

9% off MSRP

$ 88.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 80.99 USD

Add to Wish List

Genuine BMW Engine Oil Pressure And Temp. Sensor -
This item fits the following BMW Chassis:
E89 Z4,F10,F22,F25 X3,F26 X4,F30,F31,F32,F33,F34,F36

Fits BMW Engines including:
N20,N26

Show More Show Less

ECCENTRIC SHAFT

T#:545293

Part#: 11378630463

Ships in 2 Business Days

3% off MSRP $ 1,198.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,168.99 USD

Add to Wish List

Qty

3% off MSRP

$ 1,198.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,168.99 USD

Add to Wish List

P3Cars N20/N55 BMW Boost Tap

T#:394449

Part#: P3BTAP1

In Stock

$ 71.99 USD

Add to Wish List

Qty

$ 71.99 USD

Add to Wish List

Includes 5' of 5/32" boost tubing.

OEM Corteco Engine Mount - Right - F22/23 230i, F30 330i, F32/33/36 4...

T#:593108

Part#: 22116859414

Ships in 1 day

$ 136.99

This product was last offered at the strikethrough price on
05-03-2026

$ 123.99 USD

Add to Wish List

Qty

$ 123.99 USD

Add to Wish List

Don't neglect your motor mounts! Most stock BMW motor mounts are fluid-filled and the stiffness of the mount depends on this fluid. But over time the fluid leaks out and the strength of the mount is greatly reduced. This can allow excessive movement of the engine, which results in unusual vibrations, loud clunks, and unintended contact between engine components. As a leading source of high-performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Show More Show Less

Mishimoto Universal 10 Row Oil Cooler

For custom applications only. Not a direct bolt on.

T#:378421

Part#: MMOCU

In Stock

$ 410.99 USD

Add to Wish List

Qty

$ 410.99 USD

Add to Wish List

This universal oil cooler from Mishimoto is far superior to the factory unit with its 11" x 2.76" x 1.97" core. Even under optimum driving conditions increased oil temperatures will cause a drop in pressure and will decrease the ability for your engine to be properly lubricated. With this new oil cooler, you can keep your oil temperatures down for optimum driving conditions. The kit includes 4 feet of stainless braided line, adapter fittings, and oil filter sandwich adapter. Mishimoto Automotive is a leading manufacturer of aftermarket performance cooling products. The company was established back in 2003 with one goal. That goal was to provide customers with quality cooling system upgrades that work on the track and on the road. At Mishimoto, you never have to worry about the quality of the product you are installing. This kit is universal and is not a direct bolt on. *For custom applications only. Not a direct bolt on. WARNING! Prop 65 may apply to this product. Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968) is a California law that applies to call companies selling products in California. Prop 65 requires any listed chemical present above very low levels that are known to cause cancer, birth defects, or other reproductive harm. For more information about California Prop 65 warning see: www.P65Warnings.ca.gov.

Show More Show Less

P3Cars BMW B48/B58 Boost Tap

T#:594383

Part#: P3BTAP2

In Stock

$ 60.00 USD

Add to Wish List

Qty

$ 60.00 USD

Add to Wish List

Includes 5' of 5/32" boost tubing.

OEM Hengst Engine Oil Filter Kit - Pack of 10 - N20 N52 N54 N55 ...

5X Entries Into Our F80 M3 Sweepstakes
5X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat! Hengst is our preferred OEM filtration supplier!

T#:567542

Part#: 11427566327

In Stock

$ 105.99 USD

Add to Wish List

Qty

$ 105.99 USD

Add to Wish List

Stock up on oil filters and save some cash! You are going to need them, why not get a discount? This is an OEM Hengst oil filter kit made with the same materials and design as the original oil filter used in BMW dealers (but at a better price!). The kit includes the oil filter, housing cap o-ring, and washer.

Show More Show Less

OEM Corteco Engine Mount - Left - F22/23 230i, F30 330i, F32/33/36 43...

T#:593107

Part#: 22116859413

Ships in 1 day

$ 136.99

This product was last offered at the strikethrough price on
05-03-2026

$ 132.99 USD

Add to Wish List

Qty

$ 132.99 USD

Add to Wish List

Don't neglect your motor mounts! Most stock BMW motor mounts are fluid-filled and the stiffness of the mount depends on this fluid. But over time the fluid leaks out and the strength of the mount is greatly reduced. This can allow excessive movement of the engine, which results in unusual vibrations, loud clunks, and unintended contact between engine components. As a leading source of high-performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Show More Show Less

B58 Valve Cover

10X Entries Into Our F80 M3 Sweepstakes

T#:5309562

Part#: 11127645173

In Stock

Sale - Save 50% $ 395.99

This product was last offered at the strikethrough price on
05-03-2026

$ 197.99 USD

Add to Wish List

Qty

Sale - Save 50%

$ 395.99

This product was last offered at the strikethrough price on
05-03-2026

$ 197.99 USD

Add to Wish List

URO VVT Adjustment Unit - Exhaust Camshaft - BMW N52 N55 S55 3.0L ...

2X Entries Into Our F80 M3 Sweepstakes

T#:7530051

Part#: 11367583208

In Stock

$ 201.99 USD

Add to Wish List

Qty

$ 201.99 USD

Add to Wish List

This timing chain camshaft gear controls the camshaft position and timing and is located toward the front of the engine. Located on the exhaust side of the engine at the front end of the exhaust camshaft. Sometimes changed when replacing the timing chain. T#34658 may also be required when servicing this part.

Show More Show Less

Genuine BMW Oil Pump Chain

T#:35054

Part#: 11417584079

In Stock

13% off MSRP $ 119.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 103.99 USD

Add to Wish List

Qty

13% off MSRP

$ 119.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 103.99 USD

Add to Wish List

Genuine BMW timing chain. If you're servicing any timing components, its a good time to replace the chain as well.

Timing Chain Kit - B38/B48/B58 Kit 1

10X Entries Into Our F80 M3 Sweepstakes

T#:5553291

Part#: 11317617489KT

In Stock

Sale - Save 8% $ 435.99

This product was last offered at the strikethrough price on
05-03-2026

$ 402.16 USD

Add to Wish List

Qty

Sale - Save 8%

$ 435.99

This product was last offered at the strikethrough price on
05-03-2026

$ 402.16 USD

Add to Wish List

Timing Chain Kit for the BMW B38/48/58 engines composed of both quality parts by Bremmen Parts and Genuine BMW! Kit Contents: Upper Timing Chain Guide Chain Tensioner Timing Chain - Upper Timing Chain - Oil Pump Lower Timing Chain Tensioner Chain Tensioner Guide Rail Guide Rail Upper Timing Chain Tensioner Guide Slide Rail - Top Sprocket - Double Gear

Show More Show Less

Genuine BMW Vibration Damper

T#:32905

Part#: 11237573655

Ships in 1 day

8% off MSRP $ 789.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 723.99 USD

Add to Wish List

Qty

8% off MSRP

$ 789.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 723.99 USD

Add to Wish List

Genuine BMW Vibration Damper -
This item fits the following BMW Chassis:
E71,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4,F30,F32,F33,F34,F36

Fits BMW Engines including:
N55

Show More Show Less

Genuine BMW Valve Cover Gasket Kit - BMW F22/23 F3X G01/02 G11/12 G30...

T#:8123175

Part#: 11128621951KT

Ships Today

$ 203.99 USD

Add to Wish List

Qty

$ 203.99 USD

Add to Wish List

Everywhere there is a seam on your engine, there is the potential for an oil leak. This is prevented through the use of gaskets and seals. If you have oil in your spark plug wells or oil on the side of the cylinder head, chances are you have a failed gasket. One such gasket that prevents oil leaks is the valve cover gasket. This gasket is used to seal the gap between the valve cover and the cylinder head, however, since this gasket is made of rubber, it has a tendency to become brittle, crack and start to leak due to its constant exposure to heat and engine oil. This Genuine BMW gasket kit includes all three necessary gaskets to eliminate oil leaks from the valve cover.

Show More Show Less

Pierburg Pneumatic Wastegate Pressure Converter

T#:585314

Part#: 11747626351

In Stock

$ 187.99 USD

Add to Wish List

Qty

$ 187.99 USD

Add to Wish List

Located above the exhaust manifold below the lip of the engine cover

Turbocharger Installation Kit

10X Entries Into Our F80 M3 Sweepstakes

T#:598822

Part#: 11657625293KT3

Ships in 5 Business Days

Sale - Save 2% $ 204.39

This product was last offered at the strikethrough price on
06-10-2026

$ 201.21 USD

Add to Wish List

Qty

Sale - Save 2%

$ 204.39

This product was last offered at the strikethrough price on
06-10-2026

$ 201.21 USD

Add to Wish List

Reusing old hardware and gaskets can often lead to oil and exhaust leaks. To prevent this, we have assembled this kit which includes all of the basic components needed to install a turbo upgrade or a re-built turbo on your N20.

Show More Show Less

Genuine BMW- 5W-30 Oil Change & Oil Filter Housing Gasket Replacement...

T#:577420

Part#: 11427537293KT3

In Stock

$ 236.99

This product was last offered at the strikethrough price on
04-22-2026

$ 227.99 USD

Add to Wish List

Qty

$ 227.99 USD

Add to Wish List

Engine Mount - Right

T#:534295

Part#: 22116861406

In Stock

3% off MSRP $ 186.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 180.99 USD

Add to Wish List

Qty

3% off MSRP

$ 186.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 180.99 USD

Add to Wish List

Excessive drive line vibration is cause by one of a few things, but more than likely, it is the mounts in your vehicle. They keep your engine and transmission secure for more positive shifting and drive line triangulation as well as absorbing vibration. If any of these are occurring in your vehicle, it's time to examine your mounts. This motor mount is one step towards repair. This mount will function and fit just like stock and will absorb those nasty vibrations, quieting your cabin and reducing vehicle shake.

Show More Show Less

GENIUS 6 Volt / 12 Volt 10A Battery Charger - NOCO

T#:641137

Part#: GENIUS10

In Stock

20% off MSRP $ 124.95

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 99.94 USD

Add to Wish List

Qty

20% off MSRP

$ 124.95

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 99.94 USD

Add to Wish List

The GENIUS10 is a powerhouse among our chargers known for its exceptional performance, energy efficiency, and compact design. The GENIUS10 is a versatile 6-volt and 12-volt charger, maintainer, and desulfator with a robust 10-amp rating. It's engineered to handle lead-acid batteries used in automotive, marine, and deep-cycle applications, covering flooded, gel, AGM, maintenance-free types, as well as lithium-ion batteries.

Features:

Do more with Genius - Designed for 6-volt and 12-volt lead-acid automotive, marine, and deep-cycle batteries, including flooded, gel, AGM, and maintenance-free, plus lithium-ion batteries.
Enjoy precision charging - An integrated thermal sensor detects the ambient temperature and alters the charge to eliminate over-charging in hot climates and under-charging in cold climates.
Charge dead batteries - Charges dead batteries as low as 1-volt. Or use the all-new Force Mode that allows you to take control and manually begin charging dead batteries down to zero volts.
Simple to set up and use - Plug-in, connect to the battery, select a charge mode, and start charging your battery. A fully-automatic, worry-free battery charger for year-round use.
Restore your battery - Detects sulfation and acid stratification and restores lost performance for stronger engine starts and extended battery life.
Compatible with all types of vehicles - Charge and maintain cars, motorcycles, lawnmowers, ATVs, tractors, trucks, SUVs, boats, classic cars, hot rods, and more - you name it.

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

Show More Show Less

Genuine BMW Ignition Service Kit - N20 2.0L

T#:378400

Part#: 12138616153KT

In Stock

$ 453.99

This product was last offered at the strikethrough price on
08-04-2026

$ 451.99 USD

Add to Wish List

Qty

$ 451.99 USD

Add to Wish List

Oil Cooler Housing Gasket Kit

10X Entries Into Our F80 M3 Sweepstakes

T#:637847

Part#: 11428637820KT1

In Stock

$ 179.99

This product was last offered at the strikethrough price on
09-01-2026

$ 174.99 USD

Add to Wish List

Qty

$ 174.99 USD

Add to Wish List

VTT N54, N55, N20, B58 Billet Motor Mount Inserts

2X Entries Into Our F80 M3 Sweepstakes

T#:597676

Part#: VTT-INSERT-1

In Stock

$ 178.99

This product was last offered at the strikethrough price on
09-17-2026

$ 166.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 178.99

This product was last offered at the strikethrough price on
09-17-2026

$ 166.99 USD

Limited Qty Sale

Add to Wish List

Instead of completely replacing the mount, simply make a billet aluminum insert for them. This leaves the feel of the factory mount in place but stiffens them up quite a bit removing unwanted engine movement without rattling your teeth out or emptying your wallet.

Show More Show Less

THINKDIAG (include 1 Free Software)

T#:2302718

Part#: 301180767

Ships in 1 Business Day

$ 101.99

This product was last offered at the strikethrough price on
08-23-2026

$ 86.99 USD

Add to Wish List

Qty

$ 86.99 USD

Add to Wish List

ThinkDiag is prefect to use with the unique THINKCAR app. Easy and convenient, anytime and anywhere.

ARP Head Stud Kit - BMW N55/S55

N55 Engines must be drilled & tapped for proper installation

T#:23416542

Part#: ARP-HSK-S56-CA

Ships Today

$ 999.99 USD

Add to Wish List

Qty

$ 999.99 USD

Add to Wish List

MMX Performance - 4-Pin One-Piece Crank Hub Upgrade Kit - With MMR Ca...

T#:45039725

Part#: MMR20-1004FK

Special Order: No Guaranteed ETA

$ 1,227.99 USD

Add to Wish List

Qty

$ 1,227.99 USD

Add to Wish List

The centerpiece of this MMX kit is the UK-made CNC-machined one-piece crank hub, created from billet EN36 steel that's heat-treated with a 0.75mm case hardening, making it incredibly strong and durable. Included are four aerospace precision-machined dowels that mechanically lock the hub to the end of the crank itself, plus a brand new OE bolt. Installation of these dowels is certainly not a DIY job. But, to make the job easier for the professionals, ensuring that the required crank modifications are made safely and accurately, the MMX kit also includes a full installation jig that includes a bolt-on drilling guide, a location bolt for this guide, plus an HSS rolled high-speed drill bit. Together, the single-piece design combined with the four-pin location ensures that there is simply no way that the friction plates can ever slip. With the new OE crank bolt tightened appropriately, this delivers a transformational improvement in reliability and peace of mind versus the OE version. Also included is the MMR Crank Bolt Capture Plate. This adds one additional layer of defense, preventing the crank bolt from being able to back out and loosen over time, ensuring everything is tightly held together as intended.

Show More Show Less

Oil Filter Housing And Heat Exchanger - B46, B48

2X Entries Into Our F80 M3 Sweepstakes

T#:2438649

Part#: 11428596283

In Stock

$ 219.99 USD

Add to Wish List

Qty

$ 219.99 USD

Add to Wish List

OE Cross References: 11428585624 11428596283

CTS Turbo F-Series N55 BOSS Turbo Upgrade Kit

For vehicles with a production date of 07/2013 and an electronic wastegate only (EWG)

T#:8138615

Part#: CTS-TR-1550-82

Ships in 7 Business Days

Sale - Save 10% $ 2,599.99

This product was last offered at the strikethrough price on
09-29-2026

$ 2,339.99 USD

Add to Wish List

Qty

Sale - Save 10%

$ 2,599.99

This product was last offered at the strikethrough price on
09-29-2026

$ 2,339.99 USD

Add to Wish List

CTS is proud to announce the release of a premium ball-bearing turbo kit with stainless steel exhaust housing for the F2x and F3x BMW platforms equipped with N55 EWG engine. CTS utilized transient flow analysis backed by flow bench testing to optimize turbine housing for a GTX3582R while maintaining stock fitment, stock location, and using the stock waste gate (this is not a stock turbo with a bigger compressor wheel). This allows one to run any stock fitment exhaust downpipe, intake and charge pipe. The result is a factory-location big turbo that is capable of producing over 800hp with supporting mods. You can simply transfer your factory wastegate, your high performance downpipe, intake and charge pipe during the install. No custom parts are needed! Product Details: Complete brand new turbocharger; no need for core to be sent it or purchased GTX3582R-style Gen2 ceramic ball-bearing CHRA (dual ball-bearing) Billet 11 blade compressor wheel Proprietary stainless steel turbine housing, flow matched to the turbocharger VSR Balanced to exceed OE tolerances Oil and water fittings included Compatible with factory installation hardware (not included) Compatible with factory wastegate actuator (not included, use your original wastegate actuator) **BIG TURBO SOFTWARE TUNING IS REQUIRED, FUELING UPGRADES ARE RECOMMENDED.

Show More Show Less

VTT F Series B58 Engine Catch Can - F Chassis B58

2X Entries Into Our F80 M3 Sweepstakes

T#:640192

Part#: VTTB58CATCH2

Ships in 10 Business Days

$ 356.99 USD

Add to Wish List

Qty

$ 356.99 USD

Add to Wish List

This kit uses VTTs popular modular catch can and couples it with a custom CNC 6061 bracket, VTT CNC banjo fittings, VTT 5 ply silicone hose, and Push lock fittings. Install is simple, takes about 30 minutes to 2 hours depending on your skill level, and requires removing one factory hose to install the VTT hoses. Retains OEM fit and finished when installed. This kit stands out from others on the market by using high-quality AN fittings and VTT Banjo adapters. Kit contents: One Catch Can One CNC 6061 bracket Two -10 Low Profile CNC Banjo Fittings Two -10 VTT 5-Ply silicone Vacuum hoses Two -10 Push Lock Fittings Two spring clamps Fits all 2019+ G Series 3/4 BMW vehicles with the B58TU engine. Fits all 2015+ F series BMW vehicles with the B58 engine

Show More Show Less

CTA Fuel Injector Tool Kit - N20, N54, N55

T#:584132

Part#: CTA7644

Ships in 5 Business Days

$ 294.23 USD

Add to Wish List

Qty

$ 294.23 USD

Add to Wish List

The CTA Fuel Injector Tool kit is designed to remove and install your fuel injectors. 130 180, 130 270, 130 320, 2249 115

Designed to service the following BMW platforms:

N20, N47, N54, N55, N57 and N63

Show More Show Less

VTT B58 GC Turbocharger Upgrade W/ 4" Connector and Install Kit ...

2X Entries Into Our F80 M3 Sweepstakes

T#:3872390

Part#: VTTB58GC/GC+TURB

Ships in 10 Business Days

$ 2,094.99 USD

Add to Wish List

Qty

$ 2,094.99 USD

Add to Wish List

Elevate your BMW B58 engine to new heights with the VTT B58 "GC" Turbocharger Upgrade. Say goodbye to core charges, long lead times, and restrictive factory housings. VTT's 100% new casting B58 GC and GC+ turbocharger upgrades retain the factory B58 turbo's great design elements while addressing shortcomings like the small inlet area and bearing housing. The result is a turbocharger upgrade supporting over 600WHP, maintaining factory spool, and utilizing all factory connections. Experience serious B58 power effortlessly with the VTT GC Turbo Upgrade.

100% new casting for OE quality
Supports over 600WHP
Retains factory spool and connections
Improved design elements for enhanced performance
Easy drop-in B58 turbocharger upgrade
Includes 4' Aluminum Connector & Install Kit

Show More Show Less

Rubber Engine Mount - Right

T#:594919

Part#: 22116855460

Ships in 1 Business Day

$ 151.99

This product was last offered at the strikethrough price on
07-08-2026

$ 150.69 USD

Add to Wish List

Qty

$ 150.69 USD

Add to Wish List

Excessive driveline vibration is cause by one of a few things, but more than likely, it is the mounts in your vehicle. They keep your engine and transmission secure for more positive shifting and driveline triangulation as well as absorbing vibration. If any of these are occuring in your BMW, it's time to examine your mounts. This motor mount is one step towards repair, it will absorb those nasty vibrations, quieting your cabin and reducing vehicle shake.

Show More Show Less

CTS Turbo Front Mount Race Intercooler Kit - F2X/F3X N20/N55 ...

T#:5802147

Part#: CTS-F20-F30-RACE

Ships in 7 Business Days

Sale - Save 25% $ 599.99

This product was last offered at the strikethrough price on
09-29-2026

$ 449.99 USD

Add to Wish List

Qty

Sale - Save 25%

$ 599.99

This product was last offered at the strikethrough price on
09-29-2026

$ 449.99 USD

Add to Wish List

CTS Turbo is proud to announce their performance intercooler for N20 and N55 powered BMWs. This unique stepped-core design allows for maximum surface area, which optimizes cooling efficiency. Featuring a high-density core and cast aluminum end tanks, this intercooler is just what you need to keep your engine happy and add more power. If you’re interested in maintaining the sleeper look, rest assured this kit is a snap to install and no bumper trimming is required at all. Core size: 21.5' long x 3'/6' thick x 11'/6' tall, HP rating up to 800hp+

Show More Show Less

Bosch Alternator - 210 amp - Remanufactured - $125 refundable core ch...

T#:580223

Part#: AL9449X

Ships in 1 Business Day

$ 575.99 USD

Add to Wish List

Qty

$ 575.99 USD

Add to Wish List

Corteco Rubber Engine Mount - Left - F22, F23, F30, F32, F33, F36 ...

T#:556274

Part#: 22116787659

Ships in 1 Business Day

$ 180.18

This product was last offered at the strikethrough price on
08-08-2026

$ 110.99 USD

Add to Wish List

Qty

$ 110.99 USD

Add to Wish List

Replace your worn engine mounts

Elring Head gasket

2X Entries Into Our F80 M3 Sweepstakes

T#:596421

Part#: 11128676519

Ships in 1 Business Day

$ 141.99

This product was last offered at the strikethrough price on
05-04-2026

$ 123.99 USD

Add to Wish List

Qty

$ 123.99 USD

Add to Wish List

.70mm

IP High Performance Ignition Coil Set - N20

T#:1637692

Part#: IP-A122409

Ships in 5 Business Days

$ 695.00 USD

Add to Wish List

Qty

$ 695.00 USD

Add to Wish List

Ignition Projects is a Southern California based company that specializes in innovative ignitions products. Their mission is to develop stronger ignition systems in order to optimize engine performance and improve emmissions/consumption. All of their products are developed and manufactured here in Tustin, CA, right here in the US!

Show More Show Less

BMW Fuel Injector Seal Pliers And Seal Installers

T#:641886

Part#: B130190KIT

Ships in 5 Business Days

$ 219.99 USD

Add to Wish List

Qty

$ 219.99 USD

Add to Wish List

Includes 130190, 130191 and 130280

VTT N5X/S55/N2X Billet BMW Oil Filter Housing Cap - Black - BMW N52 N...

2X Entries Into Our F80 M3 Sweepstakes

T#:5122264

Part#: VTTFILTERCAPBLK

Ships in 10 Business Days

$ 89.99 USD

Add to Wish List

Qty

$ 89.99 USD

Add to Wish List

VTT is proud to offer a billet replacement for the factory plastic Oil filter housing cap. This cap does away with the weak plastic cap and the need for a special tool for removal, while adding some pop and color to your engine bay. These oil filter housing caps retain ALL of the factory provisions for the filter basket, including the lower pins which are important for the proper function of pressure bypass, etc. They also have cooling fins to help with oil temps. Vargas Turbo designed these caps to complement their N5X Billet Oil caps and N5X Billet Power Steering caps so that all 3 will have the same design. The caps are offered in 4 colors – Red, Black, Blue, and Clear anodized

Show More Show Less

N20/N26 Mishimoto Baffled Oil Catch Can

T#:389788

Part#: MMBCCN20N2612CB

In Stock at Vendor

$ 278.95 USD

Add to Wish List

Qty

$ 278.95 USD

Add to Wish List

il venting and circulation continues to be a problem on BMW engines and the N20 engine is not immune from this. The existing stock system does a poor job of separating fluid and vapor and this leads to an oily film or even small pools of oil throughout the turbos and intake. Performance issues are caused by oil sneaking by the ring seals and is coating the intake piping, intercooler, intake valves, and other critical areas. The problem is worsened with higher boost levels. Oil is excellent for lubricating moving parts but terrible when it gets into the combustion chamber, effectively lowering the octane rating and reducing performance. Our own shop has gone the extra step and offers media and chemical blasting of the intake valves to strip away the oily buildup we have seen. Our shop also strongly recommends an oil catch can be installed in the line for the crankcase vent. The oil catch can traps oil as it leaves the valve cover and holds it in a canister. This catch can is located on the cooler side of the engine where the oil will condense easier and stay in the can. Whatever minimal vapors are left over in the oil is then vented back through the canister and into the intake where it is safe to be burned up in the engine or recirculated back through the system again. This is the way the system was designed! At each oil change simply unscrew the canister and empty the trapped oil with your regular used oil. Installing one of these will avoid costly repairs in the future and help maintain your boost and performance. It's one of the smartest modifications you can make because it demonstrates a well-thought out tuning strategy and care for the condition of your engine. The Mishimoto Oil Catch Can is made from aluminum and with a stealthy black anodized finish. It installs on the cooler side of the engine with a dedicated bracket and new oversized vent lines. The location is key as heat will evaporate the oil and send too much vapor back into the engine (where cooler air will turn it back into fluid). Note: Since the crankcase vent system is considered part of the overall emissions system, installing this may be a violation of local, state, and federal laws. While exemptions are made for track/race and off-road use, check with your local state inspection facility on using this in street-driven vehicles. This item fits the following BMWs with the N20 or N26 turbo engine: 2014-2016 F2X 228i 228i xDrive 2012-2016 F3X 320i 320i xDrive 328i 328i xDrive 428i 428i xDrive WARNING! Prop 65 may apply to this product. Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968) is a California law that applies to call companies selling products in California. Prop 65 requires any listed chemical present above very low levels that are known to cause cancer, birth defects, or other reproductive harm. For more information about California Prop 65 warning see: www.P65Warnings.ca.gov.

Show More Show Less

VTT N5X/S55/N2X Triple Billet Cap Kit - Clear - BMW N20/52/54/55 ...

2X Entries Into Our F80 M3 Sweepstakes

T#:5122281

Part#: TRIPLECAPCLR1

Ships in 10 Business Days

$ 249.99 USD

Add to Wish List

Qty

$ 249.99 USD

Add to Wish List

Save 10% by buying all 3 VTT Billet Caps together! VTT is proud to offer their billet replacement for the factory plastic Power Steering Cap, Oil Filter Housing Cap, and Oil Fill Cap. These caps do away with the weak plastic construction while adding some pop and color to your engine bay. These caps retain ALL of the factory provisions to ensure proper fitment and operation. Vargas Turbo designed these caps to complement each other, so all 3 will have the same design and color shades. These caps come in 4 colors – Red, Black, Blue, and Clear anodized.

Show More Show Less

Multi-Pump Fuel Surge Tank (MPFST)

T#:31059457

Part#: 20-1440

In Stock

$ 549.99 USD

Add to Wish List

Qty

$ 549.99 USD

Add to Wish List

VTT N5X/S55/N2X Billet BMW Oil Filter Housing Cap - Red - BMW N52 N54...

2X Entries Into Our F80 M3 Sweepstakes

T#:5122265

Part#: VTTFILTERCAPRED

In Stock

$ 89.99 USD

Add to Wish List

Qty

$ 89.99 USD

Add to Wish List

VTT is proud to offer a billet replacement for the factory plastic Oil filter housing cap. This cap does away with the weak plastic cap and the need for a special tool for removal, while adding some pop and color to your engine bay. These oil filter housing caps retain ALL of the factory provisions for the filter basket, including the lower pins which are important for the proper function of pressure bypass, etc. They also have cooling fins to help with oil temps. Vargas Turbo designed these caps to complement their N5X Billet Oil caps and N5X Billet Power Steering caps so that all 3 will have the same design. The caps are offered in 4 colors – Red, Black, Blue, and Clear anodized

Show More Show Less

BOSCH High-Pressure Fuel Pump - N20 N26 2.0L

T#:639092

Part#: 13517584461

In Stock

$ 459.99

This product was last offered at the strikethrough price on
05-07-2026

$ 406.99 USD

Add to Wish List

Qty

$ 406.99 USD

Add to Wish List

This is the high-pressure fuel pump for BMW's with the N20 turbo engine. Bosch High-Pressure Pump - This item fits the following BMW Chassis: E89 Z4,F10,F22,F25 X3,F26 X4,F30,F31,F32,F33,F34,F36 Fits BMW Engines including: N20,N26

Show More Show Less

VTT N5X/S55/N2X Triple Billet Cap Kit - Black - BMW N20/52/54/55 ...

2X Entries Into Our F80 M3 Sweepstakes

T#:5122279

Part#: TRIPLECAPBLK1

Ships in 10 Business Days

$ 220.99 USD

Add to Wish List

Qty

$ 220.99 USD

Add to Wish List

Save 10% by buying all 3 VTT Billet Caps together! VTT is proud to offer their billet replacement for the factory plastic Power Steering Cap, Oil Filter Housing Cap, and Oil Fill Cap. These caps do away with the weak plastic construction while adding some pop and color to your engine bay. These caps retain ALL of the factory provisions to ensure proper fitment and operation. Vargas Turbo designed these caps to complement each other, so all 3 will have the same design and color shades. These caps come in 4 colors – Red, Black, Blue, and Clear anodized.

Show More Show Less

OEM Rein Valve Cover - F22/23 F3X N20 2.0L

For vehicles with the N26 SULEV engine only

2X Entries Into Our F80 M3 Sweepstakes

T#:639079

Part#: 11127633630

In Stock

$ 285.99 USD

Add to Wish List

Qty

$ 285.99 USD

Add to Wish List

Is your valve cover cracked, warped, or otherwise faulty? This valve cover from OEM Rein is a perfect replacement option to guarantee a factory-like fit and reliability!

Pure Turbos N55 Stage 2 Turbo Upgrade - BMW N55 3.0L w/ EWG

For vehicles with electronic waste gate (EWG)

T#:578281

Part#: PURE-N55-0004KT

Ships on Nov 18, 2026

$ 3,114.99

This product was last offered at the strikethrough price on
07-13-2026

$ 3,000.00 USD

Add to Wish List

Qty

$ 3,000.00 USD

Add to Wish List

As BMW enthusiasts, we admittedly did not know how to feel when BMW moved to forced induction. We loved the naturally aspirated power that the NA straight six produced, but Pure Turbos has been able to prove time and time again what a forced induction BMW powerplant is capable of putting down. Here at Turner Motorsport, we trust Pure Turbos to meet all of your power desires - after all, there's a reason the majority of the fastest forced induction BMWs on the road are running Pure Turbos. Looking for massive gains out of your N55 powered BMW? This Stage 2 turbo upgrade kit from Pure Turbos can allow you to achieve over 500whp reliably with supporting modifications! This price includes a $500 core charge that is refunded once we receive your rebuildable core. This upgrade kit features: Upgraded high flow turbine wheel Upgraded point-milled billet compressor wheel Dual oil seals on both compressor and turbine Large diameter 360 thrust upgrade Extensive turbofold modifications and machining Direct fit, as OEM, as these utilize OEM housings Featuring a limited 1 year warranty. For vehicles with electronic waste gate (EWG)

Show More Show Less

Fuel Pump Lock Ring Tool

T#:641918

Part#: 161190

Ships in 5 Business Days

$ 127.68 USD

Add to Wish List

Qty

$ 127.68 USD

Add to Wish List

Don't damage your lock ring, do it correctly with this tool

Project Cars

SELECT YOUR BMW

BMW Engine Parts for BMW 4 Series F32 (2014+)

Sub-Categories

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results