BMW Engine Parts for BMW 4 Series F32 (2014+)

MMX High Performance Oil Filter - BMW B58 & B58TU

T#:29035359

Part#: MMR17-1502

Special Order: No Guaranteed ETA

$ 81.99 USD

Add to Wish List

Qty

$ 81.99 USD

Add to Wish List

Get rid of the notorious B58 oil filter disintegration problem forevermore with the MMR Performance Oil Filter. By replacing the factory paper filter element with MMR’s advanced high-flow, high-filtration stainless steel filter unit, you will protect your engine from the big bills (and potentially worse) caused by the OE filter’s collapse failure. The oil filters on BMW’s B58 & B57 3.0 6-cylinder engines (both petrol and diesel) suffer from a well-documented quality problem with the factory paper-element oil filter. At service time, when removal of the filter is attempted, the bottom section frequently breaks away from the disintegrated filtration material. This leaves the broken base stuck in the oil filter housing and an expensive removal/replacement job to extract the remains and fit a new housing. Such is the problem that there’s even an official BMW technical bulletin to warn their dealers of this. The MMR replacement Oil Filter is a pretty special replacement filter. It fixes this annoying problem once and for all. The MMR Oil Filter element is made from a pleated high-flow stainless steel micronic filter cloth – a medical-grade material guaranteed to filter out oil contamination right down to 20 Microns, ensuring far better protection than paper-based filters can achieve. As well as this exceptional filtration, the filter material allows for five times the flow of comparable paper oil filters. Its design provides consistent filtering across entire filter surface. The failure of the factory oil filter generally just leads to a large bill to extract the damaged remnants. However, more worryingly, it has occasionally been known to lead to broken pieces of filter media running through the small oilways and orifices of the engine’s lubrication system, risking blocking the oil running round the bearings and VANOS system and causing much greater mechanical damage before it is caught. The MMR Oil Filter is a reusable unit which can be used over and over again. As long as it is thoroughly cleaned at each oil change, it will last the lifetime of the vehicle and keep on protecting the engine just as it did when new. However, proper cleaning is not necessarily a DIY job, as it requires the use of a suitable solvent to break down the old oil, and cleaning from the inside out with compressed air to remove any risk of debris remaining. If you have any doubts about this, we recommend as best-practice to change filter with every oil-change. The MMR Oil Filter is a lifetime reusable filter. But to resuse and avoid any future loss of filtration or oil flow, it is essential that it is thoroughly cleaned at each oil change as follows: Remove MMR Oil Filter from filter housing Remove 3x O-Rings from MMR Oil Filter prior to Step 3, as fuel will degrade and cause damage to these rubber/Viton components. Soak the filter one of the following fluids for 5-10 minutes – Petrol/Gasoline or Carb Cleaner or Soap and Water Agitate/stir every few minutes until the outer surface is free of any engine debris Dry the filter using compressed air, blow air through the filter, (do not press the compressed air gun against the filter, keep at least a 10mm gap from nozzle to filter) starting from the inside out, then at an angle on the outside of the screen to further remove any remaining particles or cleaning solution. Once dry, reinstall O-Rings (MMR advices replacement of these O-Rings every oil service - See ES4810064) and refit into oil filter housing and engine. If you have any doubt about your ability to perform this sequence, we recommend replacing the filter element with each oil change.

Show More Show Less

Crankshaft

T#:38924612

Part#: 11217580483

Special Order: No Guaranteed ETA

Sale - Save 3% $ 1,608.99

This product was last offered at the strikethrough price on
05-03-2026

$ 1,560.27 USD

Add to Wish List

Qty

Sale - Save 3%

$ 1,608.99

This product was last offered at the strikethrough price on
05-03-2026

$ 1,560.27 USD

Add to Wish List

Direct replacement N55 crankshaft for a fraction of the cost of Genuine

OEM Kolbenschmidt Adjustment Unit - Exhaust Camshaft - BMW N52 N55 S5...

T#:31092510

Part#: 11367583208

Special Order: No Guaranteed ETA

$ 103.99

This product was last offered at the strikethrough price on
03-31-2026

$ 94.99 USD

Add to Wish List

Qty

$ 94.99 USD

Add to Wish List

This timing chain camshaft gear is the thicker gear located toward the front of the engine on the end of the exhaust camshaft. This is sometimes changed when replacing the timing chain. BMW # 11367578877 may also be required when servicing this part.

Show More Show Less

OEM Kolbenschmidt Adjustment Unit - Inlet Camshaft - BMW N52 N55 S55 ...

T#:31092509

Part#: 11367583207

Special Order: No Guaranteed ETA

$ 103.99

This product was last offered at the strikethrough price on
03-31-2026

$ 94.99 USD

Add to Wish List

Qty

$ 94.99 USD

Add to Wish List

This timing chain camshaft gear is the thicker gear located toward the front of the engine on the end of the intake camshaft. This is sometimes changed when replacing the timing chain. BMW # 11367578877 may also be required when servicing this part.

Show More Show Less

Fuel Tank Breather Valve and Breather Line - F2X F3X

For vehicles with production date up to 11/14, also use: (Qty.) (1) 12 51 8 645 886 ada...

T#:8677198

Part#: 13907636145

Special Order: No Guaranteed ETA

Sale - Save 15% $ 98.99

This product was last offered at the strikethrough price on
05-03-2026

$ 84.09 USD

Add to Wish List

Qty

Sale - Save 15%

$ 98.99

This product was last offered at the strikethrough price on
05-03-2026

$ 84.09 USD

Add to Wish List

Direct replacement for faulty or damaged fuel tank breather valve/lines.

Schwaben Digital Circuit Tester With Test Probes

T#:2631900

Part#: 029054SCH01A

Special Order: No Guaranteed ETA

Sale - Save 5% $ 37.99

This product was last offered at the strikethrough price on
05-03-2026

$ 36.09 USD

Add to Wish List

Qty

Sale - Save 5%

$ 37.99

This product was last offered at the strikethrough price on
05-03-2026

$ 36.09 USD

Add to Wish List

Embark on a new level of circuit testing with the Schwaben Digital Circuit Tester With Test Probes. Whether you're a seasoned professional or a dedicated enthusiast, this tool equips you with the confidence and precision needed for intricate diagnostics. And with our LIFETIME REPLACEMENT program, you can rest assured that you've found the ultimate circuit tester. Features: Versatile Voltage Compatibility: Seamlessly navigate 6, 12, and 24V systems, offering comprehensive diagnostics for various setups. Trusted CE Approval: Prioritize safety and accuracy with CE Approval, allowing you to confidently undertake complex circuit assessments. Extended Reach: Effortlessly maneuver through testing scenarios, even in challenging areas, with the coil cord's 12-foot extension. Pinpoint Accuracy: Eliminate guesswork with the real-time, precise voltage readings displayed on the digital screen, facilitating well-informed decisions. Intuitive Power and Ground Indication: Streamline your testing process using vibrant red (power) and green (ground) LCD indicators for swift and accurate connections. Universal Compatibility: Seamlessly integrate with a wide range of circuit testing equipment thanks to the standard 4mm banana jacks on the probes, offering hassle-free use alongside your existing tools. Includes: Digital circuit tester Piercing probe Long probe Small probe WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

Show More Show Less

N20 Vacuum Hose - 11657607726

T#:36981055

Part#: 11657607726

Special Order: No Guaranteed ETA

Sale - Save 20% $ 42.99

This product was last offered at the strikethrough price on
05-03-2026

$ 34.26 USD

Add to Wish List

Qty

Sale - Save 20%

$ 42.99

This product was last offered at the strikethrough price on
05-03-2026

$ 34.26 USD

Add to Wish List

Due to weak rubber construction and exposure to heat, this vacuum hose may be brittle and/or broken.

Replace it with this high-quality piece from Bremmen Parts to ensure proper turbocharger functionality.

Show More Show Less

URO Rubber Engine Mount - Left

2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:2423589

Part#: 22116787659

Back Ordered

$ 60.99 USD

Add to Wish List

Qty

$ 60.99 USD

Add to Wish List

URO Rubber Mounting Left -
This item fits the following BMW Chassis:
F22,F30,F32,F33,F36

Fuel Pump Assembly

2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:639286

Part#: 16117243975

Ships in 1 Business Day

$ 129.99 USD

Add to Wish List

Qty

$ 129.99 USD

Add to Wish List

This fuel pump is located inside the fuel tank on the right side. When the pump fails, your engine could suffer fuel starvation. URO Parts is one of the leading manufacturers of high quality direct replacement aftermarket components, covering a wide range of makes and models. All of their replacement parts are manufactured to ISO 9000 certification standards, so you can expect long lasting performance from URO Parts. As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Show More Show Less

Valve Cover Gasket Set

T#:15478721

Part#: 11127587804

Back Ordered

$ 28.99 USD

Add to Wish List

Qty

$ 28.99 USD

Add to Wish List

A leaky valve cover gasket makes a mess of your engine, your garage, and allows the life-blood of your engine to escape. Replace leaky valve cover gaskets and always start with a fresh gasket after valve cover removal. Trouble trying to track down your leak? The easiest way to do so is by cleaning your engine, then examining for leaks.

Show More Show Less

CTS TURBO Front Mount Intercooler Kit - F2X/F3X N20/N55

T#:587601

Part#: CTS-F20-F30-DF

Ships in 7 Business Days

$ 449.99 USD

Add to Wish List

Qty

$ 449.99 USD

Add to Wish List

Step up to a more efficient intercooler that will provide better flow and less weight.

OEM INA Engine Timing Chain - N47, N20

T#:42301983

Part#: ZC0219

In Stock

$ 80.99

This product was last offered at the strikethrough price on
06-29-2026

$ 62.99 USD

Add to Wish List

Qty

$ 62.99 USD

Add to Wish List

Ensure your BMW runs like new with the precision and durability of this OEM INA timing chain - engineered for performance, built for reliability.

Vargas Titanium Valve Cover Hardware Upgrade - Black - BMW B58, N55, ...

For vehicles with VTT Valve Cover

T#:52129732

Part#: VTT-TI-BOLTS-2-B

Back Ordered

$ 59.99 USD

Add to Wish List

Qty

$ 59.99 USD

Add to Wish List

The VTT Titanium Valve Cover Hardware Kit is the ultimate finishing touch for your BMW N55, S55, or B58 engine.

Pure Turbos NEW B58 Gen1 PURE800 Turbo Upgrade - F22/23 M240, F3X 340...

T#:8076767

Part#: PUR-TUR-B58-012

Ships in 1 Business Day

$ 3,107.99

This product was last offered at the strikethrough price on
07-07-2026

$ 3,107.00 USD

Add to Wish List

Qty

$ 3,107.00 USD

Add to Wish List

Looking to upgrade your turbo? Pure Turbos now offers their PURE800 B58 Turbo Upgrade kit! Pure Turbo's PURE800 turbo kit is designed to support 700+ wheel horsepower with supporting modifications. This is more than enough power to thoroughly enjoy driving your BMW both on the street and on the track, without having to spend the high prices needed to break the quadruple-digit power threshold.

Show More Show Less

OEM INA Timing Chain Sprocket - Inlet Camshaft - BMW N20 2.0L ...

We Price Match - Give Us A Call or Chat!

T#:35998448

Part#: 11367583818KIT

Back Ordered

$ 267.99 USD

Add to Wish List

Qty

$ 267.99 USD

Add to Wish List

Replace this so your timing chain meshes perfectly with the gear teeth for optimal performance.

Carrillo Pro-H Connecting Rods w/ WMC Bolts - Set Of 4 - BMw N20 2.0L...

T#:25042509

Part#: SCR9101-4

Back Ordered

$ 1,230.99 USD

Add to Wish List

Qty

$ 1,230.99 USD

Add to Wish List

Carrillo rods are your number one option for performance connecting rods! If you are looking to upgrade your N20 engine to handle greater power, we highly recommend these Pro-H connecting rods. Upgrading connecting rods in your engine can bring several benefits, particularly if you're looking to enhance performance, reliability, and overall durability. Here are some reasons why you might consider investing in upgraded connecting rods: Increased Strength: Upgraded connecting rods are often made from stronger materials, such as forged steel or titanium, compared to stock rods. This increased strength helps withstand higher levels of stress and load, making them suitable for high-performance applications. Improved Durability: Enhanced materials and manufacturing processes contribute to improved durability, reducing the risk of connecting rod failure, especially in high-stress situations. This is crucial for engines that undergo frequent high-speed or high-stress conditions, such as in racing or heavy-duty applications. Higher RPM Capability: Upgraded connecting rods are designed to handle higher engine RPM (revolutions per minute) without succumbing to fatigue or deformation. This is beneficial for those seeking increased horsepower and torque at higher engine speeds. Reduced Weight: Some upgraded connecting rods are engineered to be lighter while maintaining strength, contributing to a lower overall rotating mass in the engine. This can result in quicker revving, improved throttle response, and better overall performance. Enhanced Precision: Upgraded rods often undergo more precise machining processes, ensuring tight tolerances and improved balance. This precision can lead to better engine stability and reduced vibration, ultimately extending the life of engine components. Compatibility with High-Performance Builds: If you're planning on modifying your engine for increased horsepower through methods like turbocharging or supercharging, upgraded connecting rods become essential. They provide the necessary strength and reliability to handle the increased stresses associated with forced induction. Prevention of Catastrophic Failures: Upgrading connecting rods can act as a preventive measure against catastrophic engine failures. The improved strength and durability reduce the risk of a connecting rod breaking, which could lead to severe engine damage. Specifications: CC(in): 5.683 CC(mm): 144.35 Style: PRO-H Bolt Size: 3/8 Bolt Type: WMC Pin Width(in): 0.822 Pin Width(mm): 20.88 Big Width(in): 0.822 Bid Width(mm): 20.88 Big Bore(in): 2.1112 Big Bore(mm): 53.62 Pin Size: 22mm QTY: Set of 4 Founded by Fred Carrillo in 1963, Carrillo Connecting Rods was established with an unwavering commitment to uncompromising standards in manufacturing. Fred recognized that the relentless pursuit of speed demanded an equally fervent dedication to the quality of components. This foundational philosophy remains as strong today as it was at the inception of Carrillo in 1963. At CP-Carrillo, quality and pride are inseparable. The process of crafting a CP-Carrillo rod transcends mere forging, production targets, and shipping deadlines. The evolution of connecting rod design has become a collaborative effort involving skilled specialists. Each connecting rod is a precision symphony, with material specialists, forging experts, production craftsmen, design engineers, and engine specialists contributing their expertise and artistry. Customer feedback plays a pivotal role in our continuous product improvement. The close interaction between customers, engineering, and manufacturing fosters the most effective rod designs, enhancing accuracy and service—a value that becomes apparent during your engine build. CP-Carrillo's dimensional integrity stands unparalleled, setting a standard of excellence in the industry.

Show More Show Less

Genuine BMW Oil Pump

T#:528044

Part#: 11417643046

Ships in 1-2 days

8% off MSRP $ 1,103.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,010.99 USD

Add to Wish List

Qty

8% off MSRP

$ 1,103.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,010.99 USD

Add to Wish List

The oil pump is responsible for making sure your engine is getting the proper oil flow.

Pneumatic Boost Solenoid - N20 N55 N63 S63 Engines

2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:6166479

Part#: 11747626351

Ships in 1 Business Day

$ 99.99

This product was last offered at the strikethrough price on
06-30-2026

$ 89.99 USD

Add to Wish List

Qty

$ 89.99 USD

Add to Wish List

Optimize the performance of your BMW's N20, N55, N63, or S63 engine with the Pneumatic Boost Solenoid. This essential actuator plays a crucial role in regulating vacuum, influencing the overall performance of your vehicle. Ensure your BMW operates at its best by addressing faulty boost solenoids promptly.

Engine Performance Optimization: The boost solenoid enhances the overall performance of N20, N55, N63, and S63 engines.
Vacuum Regulation: Precisely regulates vacuum levels, contributing to efficient engine operation.
Compatibility: Designed for BMW vehicles with N20, N55, N63, and S63 engines for a perfect fit.
Fault Resolution: Promptly addressing faulty boost solenoids ensures consistent and reliable vehicle performance.

Upgrade your BMW's engine performance with the Pneumatic Boost Solenoid, designed to deliver optimal functionality for N20, N55, N63, and S63 engines.

Show More Show Less

N55 Big Turbo Upgrade - F2X / F3X / F87 M2

Call In Or Chat For Best Price!
CARB certified for sale in all 50 states

T#:15544960

Part#: D310-0110A

EO#: D-176-52

Back Ordered

Sale - Save 14% $ 1,980.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,709.96 USD

Add to Wish List

Qty

Sale - Save 14%

$ 1,980.99

This product was last offered at the strikethrough price on
06-24-2026

$ 1,709.96 USD

Add to Wish List

Elevate Turbocharger Performance with Upgraded Kit

Upgrade your turbocharger's performance with this kit, presenting an impressive 30% increase in the compressor wheel size within the stock turbocharger housing. Experience a significant power boost by elevating pressure at high RPMs while maintaining efficient operation. The enhanced thrust system ensures prolonged turbocharger life, and for optimized performance, consider pairing it with Stage 4 Dinan software to manage the additional boost.

Key Features:

Increases compressor size by 30%
Boosts power through increased boost pressure
Upgraded thrust system for turbocharger longevity
DINANTRONICS Stage 4 software recommended for optimal engine performance
Earns 2 points towards your Dinan badge

With over 35 years of expertise, Dinan leads BMW tuning advancements, prioritizing balanced enhancements that preserve the original driving feel. Backed by a four-year, 50,000-mile warranty, Dinan parts undergo rigorous testing, ensuring reliability. Upon significant part installation, enthusiasts receive an exclusive trunk badge, signifying the transition to Dinan performance.

Show More Show Less

OEM Rein Turbocharger Oil Supply Line - BMW B46/B48 2.0L

2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:32748261

Part#: 11428487371

In Stock at Vendor

$ 57.99 USD

Add to Wish List

Qty

$ 57.99 USD

Add to Wish List

This metal supply line supplies oil to the turbocharger, keeping it lubricated and regulating temperatures. If yours has developed a leak, replace it as soon as possible to prevent oil loss and damage to the turbocharger.

Show More Show Less

Hitachi Fuel Pump Camshaft Follower - BMW N20 N55 S55 N63 S63 B48/46 ...

T#:589968

Part#: 11327601233

Back Ordered

$ 55.00 USD

Add to Wish List

Qty

$ 55.00 USD

Add to Wish List

A faulty camshaft follower can damage the engine and cause incorrect valve timing.

Nissens Oil Cooler - Multiple BMWs

T#:380463

Part#: 11427525333

Ships in 6 Business Days

$ 118.99 USD

Add to Wish List

Qty

$ 118.99 USD

Add to Wish List

Heat Exchanger - This item fits the following BMW Chassis: E70 X5,E71,E82,E83 X3,E85,E86,E89 Z4,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4,F30,F31,F32,F33,F34,F36 Fits BMW Engines including: N20,N26,N51,N51,N52,N52N,N54,N55

Show More Show Less

Corteco Engine Mount - Left - F30, F32, F33, F36

T#:556323

Part#: 22116862549

Back Ordered

$ 94.99 USD

Add to Wish List

Qty

$ 94.99 USD

Add to Wish List

Reduce driveline vibrations with a new motor mount

Timing Chain Kit - N55

T#:640375

Part#: 113175840841KT1

In Stock at Vendor

$ 693.79 USD

Add to Wish List

Qty

$ 693.79 USD

Add to Wish List

The N55 in your BMW is an interference engine, meaning that if the timing chain were to fail your engine would suffer catastrophic damage due to valvetrain components colliding with each other. Over time the timing chain will start to wear and stretch, potentially causing it to skip timing or just completely fail. Also, the timing tensioners themselves could fail! Early symptoms of timing chain wear include front end noise not associated with VANOS, or slapping noises coming from the timing cover. Turner Motorsport has assembled a complete kit that includes everything necessary, as well as small hardware, to completely service the timing on your N55. Tools needed to do the job can be found on our site as well.

Show More Show Less

Spark Plugs - Set Of Six

T#:14982199

Part#: 121200405516KT

Back Ordered

$ 95.99 USD

Add to Wish List

Qty

$ 95.99 USD

Add to Wish List

N55 Cometic Head Gasket - 0.052"

T#:31522946

Part#: C15476-052

Back Ordered

$ 194.99 USD

Add to Wish List

Qty

$ 194.99 USD

Add to Wish List

Cometic is the industry standard when upgrading the head gasket on your high performance BMW. These MLS (Metal Layered Steel) head gaskets are many enthusiasts’ choice when adding more boost or simply bulletproofing your current setup! Designed for high-performance applications, Cometic Head Gaskets are sure to stand up to the task!

Show More Show Less

Dinan N55 Big Turbo Upgrade - F22 F3X N55 (Electronic Wastegate) ...

Call In Or Chat For Best Price!

T#:403061

Part#: D-310-0110A

Back Ordered

Sale - Save 10% $ 1,899.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,709.96 USD

Add to Wish List

Qty

Sale - Save 10%

$ 1,899.99

This product was last offered at the strikethrough price on
07-31-2026

$ 1,709.96 USD

Add to Wish List

For the racing enthusiast or those just looking for the best, this is the ultimate upgrade to fully maximize the power output of your EWG N55 engine. The compressor wheel inside the turbocharger is increased in size allowing ~30% greater flow thus enabling additional boost pressures at higher engine speeds while retaining efficiency.These are fully cast turbos that are manufactured to Dinan specifications along with an upgraded thrust system over the stock turbo to ensure reliable and prolonged life. In order to attain maximum advertised power gains these big turbos will need to be paired with DINANTRONICS Stage 4, as well as Dinan’s intercooler to fully regulate the boost increase and deliver a polished product although the exhaust and intake are also recommended.

Benefits of the Dinan Big Turbo for the EWG N55 Engine:

Fully cast turbo that is manufactured to Dinan specifications with an upgraded thrust system thereby avoiding lengthy turnaround times caused by a core exchange program.
Larger billet compressor/impeller wheel that allows ~30% greater flow over stock which then enables additional boost to be realized while retaining efficiency.
Turbo assembly is compatible with electric wastegate vehicles only.
Peak power: 445 HP @ 6000 RPM and 455 ft-lbs @ 3000 RPM and a max gain of 128 HP @ 6000 RPM and 113 ft-lbs @ 6000 RPM when coupled with other Dinan Performance upgrades. (Data from F22 M235i.) 448 HP @ 6500 RPM and 417 ft-lbs @ 3000 RPM and a max gain of 152 HP @ 6500 RPM and 123 ft-lbs @ 6500 RPM when coupled with other Dinan Performance upgrades. (Data from F32 435i. Other variants may differ.)
Dinan Installation instructions detail a procedure which is quicker than BMW's turbo replacement procedure saving the end-user money and time at the shop (Applicable to RWD vehicles only).
Includes o-rings and gaskets needed for complete installation on a RWD vehicle only. If installing on an xDrive vehicle Dinan P/N D313-0117 is required for additional installation hardware.
Factory matching new car warranty (4yr/50k) when run in Dinan specification.
50 State Emissions legal; CARB EO # D-176-49.

Show More Show Less

Genuine BMW Valve Cover - BMW Gen1 B58

T#:222835

Part#: 11127645173

Back Ordered

3% off MSRP $ 693.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 671.99 USD

Add to Wish List

Qty

3% off MSRP

$ 693.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 671.99 USD

Add to Wish List

Genuine BMW replacement cylinder head valve cover with built in PCV valve. Replacement restores smooth idle when the PCV valve has failed. Includes inner and outer gaskets between the valve cover and the engine.

Show More Show Less

GB500+ Max UltraSafe Lithium 6250A Jump Starter - NOCO

T#:641114

Part#: GB500

Back Ordered

20% off MSRP $ 2,499.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,999.99 USD

Add to Wish List

Qty

20% off MSRP

$ 2,499.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,999.99 USD

Add to Wish List

The GB500+ is a powerful portable lithium jump starter delivering 6250 amps, designed to jump-start gasoline and diesel engines up to 45 liters. Its versatility extends to a wide range of vehicles and equipment, including semi-trucks up to class 8, motorhomes, coaches, buses, as well as mining, agricultural, construction, and vocational equipment with 6, 8, 12, and 16 cylinders, and beyond.

Features:

Introducing one of the most powerful lithium jump starters yet. Designed for the largest, most challenging engine starts ever. With over 6250-amps of starting power, it can jump start gasoline and diesel engines up to 45-liters.
Safe and easy to use battery jump starter pack without the worry of incorrect connections or sparks. Safely connect to any 12-volt and 24-volt battery with our mistake-proof design featuring spark-proof technology and reverse polarity protection.
It's commercial in every way. It jump starts almost every type of vehicle and equipment, including semi-trucks (up to class 8), motorhomes, coaches, buses, mining, agricultural, construction, and vocational equipment - 6, 8, 12, and 16 cylinder - and more. Plus, an integrated digital battery voltmeter for enhanced diagnostics.
Jump starters this powerful typically are enormous and weigh hundreds of pounds, but our high discharge lithium technology makes it the most compact and lightweight design in the world - weighing a mere 24-pounds. And its portable carrying case makes jump starting more convenient than ever.
It's not just a lithium jump starter but also a portable power bank for recharging smartphones, tablets, and other USB devices, with an ultra-bright 2,200-lumen LED flashlight with seven light modes, including emergency strobe and SOS.

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

Show More Show Less

Denso Alternator

T#:384619

Part#: 12317616119

Back Ordered

$ 442.99 USD

Add to Wish List

Qty

$ 442.99 USD

Add to Wish List

Denso Brand

When power starts to fade in your BMW, chances are your alternator is losing power. The warning light should illuminate, warning you of such a failure. Replace with a new unit today. Do not get stuck on the side of the road.

Show More Show Less

Fuel-It! Low Pressure Fuel Pump Upgrade Stage 2 - N55 F-Series ...

T#:403295

Part#: FILPFPK5

Back Ordered

Sale - Save 2% $ 649.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 634.84 USD

Add to Wish List

Sale - Save 2%

$ 649.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 634.84 USD

Add to Wish List

This is a complete Low Pressure Fuel Pump (LPFP) upgrade that replaces your weak stock LPFP assembly with a high-flow E85-certified one. Standard Kit Includes: A brand new OEM LPFP bucket that is upgraded with a new Walbro 450 or 525 pump and filter. A new E85 compatible Walbro 450 pump (F90000274) that flows 50% more fuel than stock Optional A new E85 compatible Walbro 525 pump (F90000285) that flows 65% more fuel than stock NOTE: Owners with I-Drive may get a Fuel pump warning on the screen that says "Continued driving is possible. Have the system checked by your BMW center as soon as possible." As long as the car is running fine and does not exhibit any other symptoms, there is not an issue with the pump and this can be ignored. If you have any questions about this please feel free to contact us. Upgraded pumps pull more current, so if your EKP (LPFP control module) is weak, it may overheat causing it to shut down and need to be replaced. If this is a concern for you check out our Stage 3 fuel pump upgrade kits that retain the stock LPFP and add a secondary pump.

Show More Show Less

Nostrum Stage 3 DI Injectors - N55 S55 F-Chassis

T#:26771703

Part#: H750-1605

Back Ordered

$ 2,199.00 USD

Add to Wish List

Qty

$ 2,199.00 USD

Add to Wish List

WHP potential on Gasoline: 1000 WHP* (Calculated assuming 24 MPa fuel pressure and 328 g/(kW/hr) WHP potential on E85: 730 WHP* (Calculated assuming 24 MPa fuel pressure and 328 g/(kW/hr) Flow Rate: 20.2 g/s @ 100 bar Flow rate increase over Stock:85% Max Operating Pressure: 250bar / 25MPa / 3625psi Tune required?: Yes Recommended Tuning Suite: Ecutek & Bootmod3

Show More Show Less

CP Carrillo Pro-Xtreme Connecting Rod Set - BMW B58

T#:40478118

Part#: CAR-CRS-B58-XT

Back Ordered

$ 2,299.99 USD

Add to Wish List

Qty

$ 2,299.99 USD

Add to Wish List

Ensure your engine can handle the power and all the boost thrown at it with these 5150 AutoSport Pro-Xtreme connecting rods manufactured by CP Carrillo. These rods are precision-engineered for high horsepower and high RPM applications, ensuring superior durability for turbocharged builds, drag racing, or street/strip use.

Show More Show Less

Magnetic Billet Oil Filter Housing Cap For B58 - Red Anodized ...

T#:5269542

Part#: OILCAPB58RED

Back Ordered

$ 99.99 USD

Add to Wish List

Qty

$ 99.99 USD

Add to Wish List

Paradigm Engineering’s B58 oil filter housing cap directly augments your vehicle's oil filtration system and serves as a diagnostic tool. Each B58 oil filter cap is CNC milled from a solid block of billet aluminum and fitted with a Nickel plated neodymium rare earth magnet. This magnet is in direct contact with pre-filtered oil, as a result, the magnet will naturally capture Ferrous particles within your engine oil. Ferrous particles in engine oil cause premature wear, obstruct the paper oil filter and could be an indication of a serious issue within your engine.

Show More Show Less

B58 Cometic Head Gasket - 0.036"

T#:26738367

Part#: C14121-036

In Stock at Vendor

$ 180.99 USD

Add to Wish List

Qty

$ 180.99 USD

Add to Wish List

Multi-Layer Steel gaskets are comprised of multiple embossed layers of both proprietary high-temperature coated and uncoated stainless steel, requiring less clamp load, creating less bore distortion, and conforms load distribution across the sealing area. The embossed outer layers of our head gaskets meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The MLS Gasket (Multi-Layer Steel) features an active combustion seal on multiple layers. The stainless steel outer layers utilize FKM (Viton®) rubber coating, a high-temperature and chemical-resistant polymer. A topcoat of PTFE aids in resistance to fret and increased cold sealing. Cometic's MLX Gasket (Multi-Layer-Xtreme) features an extra 'stopper' fold-over layer providing a torque limiting surface that prevents yielding of the combustion seal. Proprietary high-temperature coatings along with embossments provide a micro seal for fluids against the head and block surface.

Show More Show Less

Genuine BMW Screw - 11127593207

T#:31528

Part#: 11127593207

In Stock

$ 6.99 USD

Add to Wish List

Qty

$ 6.99 USD

Add to Wish List

Genuine BMW Ball Pin -
This item fits the following BMW Chassis:
E71,E82,E89 Z4,E90,E92,E93,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4,F30,F31,F32,F33,F34,F36,F80 M3,F82 M4,F83

Fits BMW Engines including:
N20,N26,N55,S55

Show More Show Less

Genuine BMW Hex Bolt With Washer - 31306863134

T#:181155

Part#: 31306863134

Ships in 1-3 days

$ 7.40 USD

Add to Wish List

Qty

$ 7.40 USD

Add to Wish List

Genuine BMW Hex Bolt With Washer - M10X30-10.9
This item fits the following BMW Chassis:
F22,F30,F31,F32,F33,F34,F36

ReFlex+ Install Kit

T#:29267513

Part#: 400.1001

Ships in 5 Business Days

$ 15.00 USD

Add to Wish List

Qty

$ 15.00 USD

Add to Wish List

Hose Clamp - 32mm-50mm

T#:5228

Part#: 032-50T

In Stock

Sale - Save 40% $ 3.99

This product was last offered at the strikethrough price on
05-02-2026

$ 2.39 USD

Add to Wish List

Qty

Sale - Save 40%

$ 3.99

This product was last offered at the strikethrough price on
05-02-2026

$ 2.39 USD

Add to Wish List

Hose clamps for radiator hoses, coolant hoses, vacuum hoses, or intake hoses. These hose clamps are the same style as your OEM hoses with a smooth inside band to prevent cutting into the hose material.

Features:

9mm band width

6mm hex & slotted head

Smooth inside of band = optimal hose protection

OEM

430 Stainless steel band and housing with zinc plated steel screw

Asymmetric housing = even distribution of forces and prevents tilting of the clamp when tightening

Screw support = ease of assembly due to the safe guidance of the emerging band

Short housing saddle = even contact pressure = improved efficiency

Show More Show Less

Genuine BMW Intake Manifold Gasket

T#:36571

Part#: 11617588624

In Stock

13% off MSRP $ 22.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 19.99 USD

Add to Wish List

Qty

13% off MSRP

$ 22.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 19.99 USD

Add to Wish List

Don't let a leaking gasket rob your performance. Replace it with a Genuine BMW gasket and enjoy smooth reliable performance.

Victor Reinz Oil Drain Plug Crush Washer - Multiple BMWs & MINIs ...

T#:340629

Part#: 07119963151

In Stock

$ 2.99 USD

Add to Wish List

Qty

$ 2.99 USD

Add to Wish List

Replace your oil drain plug sealing washer ever oil change to prevent the chance of oil leaks and a stained driveway.

Genuine BMW Exhaust Manifold Stud Bolt - M7x39mm - BMW N52 N20 N54 N5...

T#:19275

Part#: 11127593376

In Stock

$ 2.99 USD

Add to Wish List

Qty

$ 2.99 USD

Add to Wish List

Nuts, bolts, washers, and clips are used to keep your car together, but when you decide to do work on your vehicle, these small components can easily go missing. These ASA Stud Bolts are used in your cylinder head, so needless to say, they are vital to your motor's health. Fits BMW Engines including: N20,N26,N51,N52,N52N,N54,N54T,N55,S55

Show More Show Less

Elring Dirko Gray Silicone Sealant - 70mL

2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:361160

Part#: UN1253000

In Stock

$ 10.79 USD

Add to Wish List

Qty

$ 10.79 USD

Add to Wish List

Useful for the creation of many gaskets. Max temperature: 300C

URO Crankcase Vent Valve Repair Kit - B58

T#:55713528

Part#: 11121025447

Ships Today

$ 222.99

This product was last offered at the strikethrough price on
07-08-2026

$ 219.99 USD

Add to Wish List

Qty

$ 219.99 USD

Add to Wish List

The URO Parts Crankcase Vent Valve Repair Kit is the smart technician's fix for the notorious BMW crankcase ventilation failures.

Febi Oil Filter - Priced Each - B58 3.0L

We Price Match - Give Us A Call or Chat!

T#:17605194

Part#: 11427826799

In Stock

$ 13.99

This product was last offered at the strikethrough price on
02-25-2026

$ 10.50 USD

Add to Wish List

Qty

$ 10.50 USD

Add to Wish List

Febi has a comprehensive range of oil filters that are OE-matching quality. The best possible filtration performance always guarantees optimal engine operation. If you are changing your filter, check ECS Tuning's website for high-quality replacement lubricants. Pick up ECS Tuning's own magnetic drain plug trap and capture shavings before they make it through your engine and to the filter.

Show More Show Less

Knock Sensor

T#:54388475

Part#: 13627636937

In Stock

$ 29.99 USD

Add to Wish List

Qty

$ 29.99 USD

Add to Wish List

Keep your ignition timing razor-sharp and your engine safe from destructive detonation. This replacement Knock Sensor acts as your engine's first line of defense, constantly listening for pre-ignition "pinging" or knocking.

Show More Show Less

URO Oil Filler Cap - E90 E92 E60 F10 F01 E83 F25 F70

T#:50031925

Part#: 11128655331

In Stock

$ 14.99 USD

Add to Wish List

Qty

$ 14.99 USD

Add to Wish List

Replaces broken or damaged oil filler cap.

Genuine BMW Throttle Housing Gasket - F30 F22 F23 F32 F33 G30 G01 ...

T#:528957

Part#: 13548632344

In Stock

$ 11.99 USD

Add to Wish List

Qty

$ 11.99 USD

Add to Wish List

Genuine BMW Oil Level Sensor Gasket Ring - Multiple BMWs

T#:7169

Part#: 12611744292

In Stock

$ 9.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 7.99 USD

Add to Wish List

Qty

$ 7.99 USD

Add to Wish List

If you are replacing your oil level sensor for any reason, it is highly recommended that you replace this seal as well to prevent any future leaks. When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.

Show More Show Less

Genuine BMW Exhaust Valve

T#:535747

Part#: 11348621264

In Stock

6% off MSRP $ 69.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 65.99 USD

Add to Wish List

Qty

6% off MSRP

$ 69.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 65.99 USD

Add to Wish List

Project Cars

SELECT YOUR BMW

BMW Engine Parts for BMW 4 Series F32 (2014+)

Sub-Categories

Elevate Turbocharger Performance with Upgraded Kit

Key Features:

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results