BMW Engine Parts for BMW 4 Series F32 (2014+)

OEM Bosch Universal 4-Wire Oxygen Sensor - Priced Each

T#:372884

Part#: 15733

In Stock

$ 74.99

This product was last offered at the strikethrough price on
10-23-2026

$ 68.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 74.99

This product was last offered at the strikethrough price on
10-23-2026

$ 68.99 USD

Limited Qty Sale

Add to Wish List

Bosch Universal Oxygen Sensors are perfect for replacing faulty sensors throwing off a check engine lights and causing poor operation and low gas mileage. If you are looking for a cheaper option or are unable to get a hold of the sensor you need, you can reuse part of the original wiring harness to connect this high quality replacement.

Show More Show Less

Genuine BMW Fuel Injector Installation Kit - N55 3.0L

T#:376798

Part#: 13537577649KT

In Stock

$ 174.99 USD

Add to Wish List

Qty

$ 174.99 USD

Add to Wish List

Walnut Blaster Vacuum Adapter - Plastic

T#:578638

Part#: B1100004

In Stock

$ 53.99 USD

Add to Wish List

Qty

$ 53.99 USD

Add to Wish List

AutoTecknic Dry Carbon Competition Oil Cap Cover - Type 1 - For Vario...

T#:39971047

Part#: BM-0007

In Stock

$ 64.99 USD

Add to Wish List

Qty

$ 64.99 USD

Add to Wish List

a precision-engineered, lightweight dry carbon fiber upgrade designed to enhance the engine bay of compatible BMW models with an aggressive motorsport look and easy OEM-style installation.

Accessory Belt Service Kit w/ Kevlar Reinforced Belt - F22/23 F3X B58...

10X Entries Into Our F80 M3 Sweepstakes

T#:22097533

Part#: 11288613707TKT

Ships in 10 Business Days

$ 105.35 USD

Add to Wish List

Qty

$ 105.35 USD

Add to Wish List

Eliminate your squeaking accessory belt pulley and cracked drive belt with this upgraded accessory belt service kit! This kit includes the ECS Kevlar Reinforced Drive Belt, tensioner assembly, and the hardware required to install the new tensioner. ECS Tuning's Red Kevlar Accessory Belts are both an aesthetic improvement and a performance alternative to a traditional belt. Kevlar-reinforced belts experience less elongation over time minimizing the amount of belt adjustment needed as well as offering a higher shock and impact resistance compared to OEM-style belts. Refreshing the rollers and/or tensioners simultaneously is a great way to ensure all vital components of your drive belt system are functioning optimally for years to come!

Show More Show Less

Turbocharger Installation Kit

10X Entries Into Our F80 M3 Sweepstakes

T#:598822

Part#: 11657625293KT3

Ships in 1-2 days

$ 204.39

This product was last offered at the strikethrough price on
06-10-2026

$ 194.44 USD

Add to Wish List

Qty

$ 194.44 USD

Add to Wish List

Reusing old hardware and gaskets can often lead to oil and exhaust leaks. To prevent this, we have assembled this kit which includes all of the basic components needed to install a turbo upgrade or a re-built turbo on your N20.

Show More Show Less

Victor Reinz Crankshaft Seal - Front

For vehicles with a production date up to 02/2011

T#:374340

Part#: 11117547842

In Stock

$ 34.00

This product was last offered at the strikethrough price on
09-26-2026

$ 25.99 USD

Add to Wish List

Qty

$ 25.99 USD

Add to Wish List

65x79x10 - Usually replaced when servicing the timing chains

Genuine BMW Engine Cover - F30 328i xDrive 320i xDrive 320i 328i ...

T#:31531

Part#: 11127594344

In Stock

9% off MSRP $ 182.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 166.99 USD

Limited Qty Sale

Add to Wish List

Qty

9% off MSRP

$ 182.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 166.99 USD

Limited Qty Sale

Add to Wish List

Genuine BMW Ignition Coil Covering -
This item fits the following BMW Chassis:
F10,F30,F31,F32,F33,F34

Fits BMW Engines including:
N20

CTA BMW Fuel Injector Removal Tool - N20 N55

T#:641694

Part#: CTA7658

Ships in 10 Business Days

$ 133.14 USD

Add to Wish List

Qty

$ 133.14 USD

Add to Wish List

Removes fuel injectors found on BMW N20 & N55 engines. Comparable to BMW Factory Tool #130 320

Spark Plug Swivel Socket 14mm X 12pt

T#:554236

Part#: CTA1061

In Stock

$ 21.42 USD

Add to Wish List

Qty

$ 21.42 USD

Add to Wish List

Ferrea High Performance Valve Spring Kit for BMW N55/S55

T#:23416526

Part#: FER-HPVSK-N55

Ships in 4 Business Days

$ 1,049.99 USD

Add to Wish List

Qty

$ 1,049.99 USD

Add to Wish List

Maximize your N55 or S55 engine's performance with Ferrea Valve Springs and Retainers, precision components crafted from chromoly alloy. These springs undergo special thermal treatment, ensuring exceptional durability even in extreme racing conditions. Addressing issues like valve binding, breakage, and float, Ferrea valve springs are meticulously heat-treated and stress-relieved, providing stability for high-lift and high-RPM racing engines while minimizing load loss. Precision CNC machined titanium retainers offer superior strength and stability. Ferrea's Spring Seat Locators, made from 4140 chromoly alloy, guarantee precise tolerances and a flat, parallel spring pad with a hard Nitride surface treatment for exceptional toughness and anti-wear characteristics. Please note that installation requires the expertise of an engine builder.

Show More Show Less

High Pressure Fuel Pump Replacement Kit

10X Entries Into Our F80 M3 Sweepstakes

T#:5389771

Part#: N55HPFKKT

In Stock

$ 1,783.99

This product was last offered at the strikethrough price on
07-06-2026

$ 1,742.99 USD

Add to Wish List

Qty

$ 1,742.99 USD

Add to Wish List

HPFP woes? Replacement high pressure exchange pump for the N55 engine. Kit includes: Remanufactured High-pressure fuel pump Intake manifold gasket sets Throttle body gasket High pressure fuel sensor No core charge required!

Show More Show Less

Braille Performance GreenLite Lithium-ION Battery - G30 - 5.5lbs ...

T#:558046

Part#: G30

Ships in 7 Business Days

$ 522.99 USD

Add to Wish List

Qty

$ 522.99 USD

Add to Wish List

The G30 lithium battery from Braille is designed for the Import Tuner market (4 and 6 cylinder) for track use and has enough power for small black V8 race cars and hot rods with light electrical demands/accessories and standard compression. The G30 comes in the popular ETX 30 Group size, just like the B3121 AGM, so it is small and light enough to mount in a variety of locations. Incorporated in this battery is the same technology used in their race winning batteries used by nearly every OEM developer in classes ranging from SCCA to Formula 1.

Show More Show Less

Elring Eccentric Shaft Sensor Seal - 11378662525

2X Entries Into Our F80 M3 Sweepstakes

T#:29300824

Part#: 11378662525

Ships in 2 Business Days

$ 42.99

This product was last offered at the strikethrough price on
08-26-2026

$ 38.99 USD

Add to Wish List

Qty

$ 38.99 USD

Add to Wish List

Ensure your BMW's engine runs flawlessly with the Elring Eccentric Shaft Sensor Seal. This essential component provides a tight seal for the eccentric shaft sensor, effectively preventing oil leaks and maintaining accurate sensor readings. Designed for BMW owners who prioritize engine health and efficiency, this seal is a vital part of keeping your vehicle in top condition.

Key Features:

Exact Match: Crafted to fit precisely with your BMW's eccentric shaft sensor, ensuring a perfect and secure fit every time. Robust Materials: Constructed from premium, resilient materials that withstand wear, extreme temperatures, and chemical exposure for extended durability. Leak-Proof Seal: Expertly designed to prevent oil leaks, safeguarding your engine and ensuring it performs at its peak. Sensor Accuracy: Maintains the integrity of the eccentric shaft sensor, ensuring accurate readings for precise engine timing and optimal performance. OEM Standard: Meets or exceeds OEM specifications, providing reliable and consistent performance. Simple Installation: Engineered for easy installation, allowing for quick replacement with minimal effort, whether by a professional or a DIY enthusiast. Engine Longevity: Protects your engine from oil contamination and potential damage, contributing to the smooth and long-lasting operation of your vehicle. Choose the Elring Eccentric Shaft Sensor Seal to uphold the quality and precision of your BMW's engine. Trust in Elring's expertise to replace your worn-out seal with a high-quality component designed to keep your engine running smoothly and efficiently.

Show More Show Less

Engine Mount - Left

10X Entries Into Our F80 M3 Sweepstakes

T#:56110324

Part#: 22116856403

Ships in 2 Business Days

Sale - Save 14% $ 119.23

This product was last offered at the strikethrough price on
10-19-2026

$ 102.44 USD

Add to Wish List

Qty

Sale - Save 14%

$ 119.23

This product was last offered at the strikethrough price on
10-19-2026

$ 102.44 USD

Add to Wish List

3/8" Dr. 5/8" Extended Spark Plug Socket

T#:2242226

Part#: W80533

Ships in 2 Business Days

$ 20.25 USD

Add to Wish List

Qty

$ 20.25 USD

Add to Wish List

Extended socket length reaches confined areas.

Solenoid Actuator For Vanos System

2X Entries Into Our F80 M3 Sweepstakes

T#:35863156

Part#: 11367593719

Ships in 2 Business Days

$ 37.99 USD

Add to Wish List

Qty

$ 37.99 USD

Add to Wish List

Adjusts valve timing through cam phasing.

N55/S55 Manley 37cc Platinum Series Dish Piston Set

T#:17073609

Part#: 647000C-6

In Stock at Vendor

7% off MSRP $ 1,208.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,121.99 USD

Add to Wish List

Qty

7% off MSRP

$ 1,208.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,121.99 USD

Add to Wish List

Upgrade the performance of your BMW N55/S55 3.0L engine with the Turner Motorsport Manley 37cc Platinum Series Dish Piston Set. Crafted from high-strength 2618 material, these pistons offer exceptional durability and reliability. The offset wrist pin design ensures quiet start-ups, while the inclusion of both Premium Chrome Moly and 9310 alloy .210” wall pins caters to varying needs. The pressure balance groove, compatibility with +1mm valve sizes, and premium steel top rings with Napier seconds and round wire locks make these pistons a top-notch choice. With a recommended piston clearance of .0035”, measured .850” from the bottom of the oil ring, these pistons guarantee optimal performance for your BMW engine.

Manley 37cc Platinum Series Dish Piston Set for BMW N55/S55 3.0L engine.
High-strength 2618 material for exceptional durability.
Offset wrist pin for quiet start-ups.
Includes both Premium Chrome Moly and 9310 alloy .210” wall pins.
Pressure balance groove for enhanced performance.
Accommodates +1mm valve sizes for customization.
Premium steel top rings with Napier seconds and round wire locks included.
Recommended piston clearance of .0035” ensures optimal engine function.

Enhance your BMW's engine with the Turner Motorsport Manley 37cc Platinum Series Dish Piston Set, delivering reliability and performance.

Show More Show Less

Valve Cover Gasket - Outer

2X Entries Into Our F80 M3 Sweepstakes

T#:5175709

Part#: 11128621951

Ships in 2 Business Days

$ 45.56

This product was last offered at the strikethrough price on
08-26-2026

$ 41.75 USD

Add to Wish List

Qty

$ 41.75 USD

Add to Wish List

If your leaking oil from the valve cover there is a good chance your valve cover has failed. Get a quality Elring replacement gasket and stop those oil leaks.

Rein N20 Turbocharger Oil Return Line - 11428626653 - F3x, F22, F23, ...

2X Entries Into Our F80 M3 Sweepstakes

T#:17771585

Part#: 11428626653

In Stock at Vendor

$ 53.99 USD

Add to Wish List

Qty

$ 53.99 USD

Add to Wish List

Rein OE quality return pipe is manufactured with premium rubber and is designed to be a direct-fit replacement.

Corteco Engine Mount - Right - F22, F30, F31, F32, F33, F34, F36 ...

T#:556322

Part#: 22116855456

In Stock at Vendor

$ 99.99 USD

Add to Wish List

Qty

$ 99.99 USD

Add to Wish List

Reduce driveline vibrations with a new motor mount

BMW N20 2.0L Front Oxygen Sensor

2X Entries Into Our F80 M3 Sweepstakes

T#:35863152

Part#: 11787589121

In Stock

$ 84.99 USD

Add to Wish List

Qty

$ 84.99 USD

Add to Wish List

BMW N20 2.0L Front Oxygen Sensor - 11787589121 is a high-quality direct-fit replacement designed to restore precise air-fuel ratio measurements for optimal engine efficiency. This oxygen sensor ensures accurate emissions control and fuel economy by delivering real-time data to the engine management system. Built with durable materials to withstand extreme exhaust temperatures, it guarantees long-lasting performance and reliability. Featuring an easy plug-and-play connection, this sensor simplifies installation while maintaining OE-level precision.

Guaranteed fitment for seamless installation and proper functionality
Direct-fit OE replacement design restores accurate air-fuel mixture regulation
Easy plug-and-play connection for hassle-free installation
High-quality materials withstand extreme exhaust system heat for durability
Alloy conductors minimize electrical resistance for precise sensor operation
Backed by a 24-month unlimited mileage warranty for added confidence

Ensure optimal fuel efficiency and emissions performance by replacing your worn-out oxygen sensor with this premium-quality BMW N20 2.0L Front Oxygen Sensor.

Show More Show Less

Victor Reinz Intake Gasket Set - E70, E71, F01, F02, F06, F07, F10, F...

T#:373815

Part#: 11617547242

Ships in 2 Business Days

$ 68.99

This product was last offered at the strikethrough price on
05-07-2026

$ 67.99 USD

Add to Wish List

Qty

$ 67.99 USD

Add to Wish List

1 for each intake runner 6 in total

Walker Oxygen Sensor - Downstream - F22 M235, F3X 335/435, F06/F12 64...

T#:31324163

Part#: 11787645875

Ships in 2 Business Days

$ 93.99

This product was last offered at the strikethrough price on
05-07-2026

$ 91.99 USD

Add to Wish List

Qty

$ 91.99 USD

Add to Wish List

The oxygen sensor is part of your BMW's emissions control system and feeds data to BMW engine management computer. The oxygen sensor is positioned in the exhaust pipe and can detect rich and lean mixtures. The goal of the oxygen sensor is to help the engine run as efficiently as possible and also to produce as few emissions as possible. When your BMW oxygen sensor fails, the computer can no longer sense the air/fuel ratio, so it ends up guessing -- resulting in poor performance, poor gas mileage, and increased pollution. Make sure your BMW engine performs as it should, and doesn't use more fuel than it needs to, by simply changing your oxygen sensor today.

Show More Show Less

VTT F Series B58 Engine Catch Can - W/ -6 Drain Valve

2X Entries Into Our F80 M3 Sweepstakes

T#:18236100

Part#: VTTB58CATCH1

Ships in 7 Business Days

$ 377.99 USD

Add to Wish List

Qty

$ 377.99 USD

Add to Wish List

VTT is proud to present our F Series B58 engine catch can setup. This kit includes our renowned modular catch can, a precision CNC-machined 6061 aluminum bracket, VTT CNC banjo fittings, robust 5-ply silicone hoses, and push-lock fittings. Installation is simple and takes approximately 30 minutes to 2 hours, depending on your experience, requiring the replacement of just one factory hose with the provided VTT hoses. The result is a clean, OEM-quality fit and finish. What distinguishes our kit from others is the use of high-quality AN fittings and VTT’s custom banjo adapters, delivering unmatched durability and performance.

Show More Show Less

Endurance Series AGM Battery - B48-H6-L3

T#:36947237

Part#: B48-H6-L3

Ships in 5 Business Days

$ 398.99 USD

Add to Wish List

Qty

$ 398.99 USD

Add to Wish List

ARP Cylinder Head Stud Kit - ARP2000 - BMW B58 3.0L

T#:1105898

Part#: 201-4701

Back Ordered

20% off MSRP $ 459.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 367.99 USD

Add to Wish List

Qty

20% off MSRP

$ 459.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 367.99 USD

Add to Wish List

For engine builders crafting a high-performance powerhouse, the ARP Cylinder Head Stud Kit is the industry-standard choice for reliability and strength. Each kit features studs, nuts, and washers manufactured from ARP’s proprietary ARP2000 alloy, a material rated far superior to standard aircraft-quality steels.

Show More Show Less

Rein B58 Turbo Charger Kit - TRK0025 - F3x, F22, F23, G32 6 Series, G...

2X Entries Into Our F80 M3 Sweepstakes

T#:53785545

Part#: TRK0025

In Stock

$ 475.99 USD

Add to Wish List

Qty

$ 475.99 USD

Add to Wish List

Rein TechSelect Turbo Kits feature replacements to the OE Turbocharger, including brackets, hardware and gaskets.

Valve Cover Gasket Kit - BMW N20

10X Entries Into Our F80 M3 Sweepstakes

T#:30164647

Part#: 11127507217KT2

Ships in 2 Business Days

$ 73.99 USD

Add to Wish List

Qty

$ 73.99 USD

Add to Wish List

Maintaining proper oil levels in your engine is crucial for peak performance. Undetected leaks can cause your oil to drop to dangerously low levels between oil changes, leading to severe engine damage.

One common culprit for oil leaks is the valve cover. Over time, exposure to extreme temperature fluctuations can wear down the gaskets, causing them to fail. Prevent oil leaks and protect your engine by replacing these vital components.

Comprehensive Kit Includes:

Valve Cover Perimeter Gasket Vacuum Pump Seal Valvetronic Actuator Seal HPFP Screws (2) Replace your old gaskets with our high-quality kit to keep your engine running smoothly and efficiently.

Show More Show Less

Radium Engineering Universal Catch Can Petcock Drain Kit

T#:27905095

Part#: 20-0024

In Stock at Vendor

$ 28.99 USD

Add to Wish List

Qty

$ 28.99 USD

Add to Wish List

Includes:

Anodized 4AN ORB Barbed Adapter Fitting, Black Ball Valve with 1/4" Barbs, 125psi @ 140F 4 feet of Radium 1/4" PCV Hose

OEM VDO Camshaft Position Sensor - BMW B48/46 B58 N20/26

We Price Match - Give Us A Call or Chat!

T#:19197278

Part#: 13627633958

Ships in 2 Business Days

$ 115.99 USD

Add to Wish List

Qty

$ 115.99 USD

Add to Wish List

Camshaft position sensors are electrical sensors that monitor the rotational speed and position of a camshaft. This signal is used by the DME to control fuel delivery and spark timing. If your camshaft position sensor is faulty, it can result in check engine lights, rough idle or running conditions, limp mode, or no starts. Replace your cam position sensor with this high-quality replacement to restore smooth engine operation.

Show More Show Less

Piston Ring Comp 3-1/2" to 7"

T#:2242223

Part#: W80573

Ships in 2 Business Days

$ 22.99 USD

Add to Wish List

Qty

$ 22.99 USD

Add to Wish List

Use to install pistons on most passenger cars and truck engines

BMW B58 Magnetic Billet Oil Filter Housing Cap - Clear Anodized ...

T#:5269540

Part#: OILCAPB58CLEAR

Ships in 6 Business Days

$ 99.99 USD

Add to Wish List

Qty

$ 99.99 USD

Add to Wish List

Paradigm Engineering’s B58 oil filter housing cap directly augments your vehicle's oil filtration system and serves as a diagnostic tool. Each B58 oil filter cap is CNC milled from a solid block of billet aluminum and fitted with a Nickel plated neodymium rare earth magnet. This magnet is in direct contact with pre-filtered oil, as a result, the magnet will naturally capture Ferrous particles within your engine oil. Ferrous particles in engine oil cause premature wear, obstruct the paper oil filter and could be an indication of a serious issue within your engine.

Show More Show Less

F3X/F2X - B58 Silent EKP PNP Cooler Kit - 40mm Noctua Fan

A Must For Cars With Upgraded LPFPs

T#:26471614

Part#: AT232F22BLA40MB5

Ships in 2 Business Days

$ 59.99 USD

Add to Wish List

Qty

$ 59.99 USD

Add to Wish List

A Must For Cars With Upgraded LPFPs The full plug-and-play EKPM3 cooler kit is designed specifically for F22/F30/F31/F34 BMWs using an EKPM3 fuel pump control module. This is recommended for anyone using a low-pressure fuel pump that is larger than the OEM fuel pump. We designed this kit with the help of Island Racewerks. The cooler housing is designed to fit over the EKP module just like the OEM housing and fits with plenty of room in the stock EKP location. The housing is 3D printed using durable PLA+. The full kit is printed and assembled in the U.S.A. by Arc Terminator LLC. Full Kit Contents: 1x EKPM3 Cooler Housing With a single 40mm Noctua Fan 1x 14x14x6mm Heatsink With Thermal Tape 1x 14x9x5mm Heatsink With Thermal Tape 1x 9x9x5mm Heatsink With Thermal Tape (EKPM3 Kit) 4x 4" Zip Ties 1x Alcohol Wipe 1x 2 Amp Mini Blade Fuse Why this kit exists: The EKPM3 and EKPM2 have been shown to overheat and cause vehicle shutdown issues when larger fuel pumps that draw more current than OEM are used. This shutdown comes from critical components on the EKPM3 and EKPM2 overheating when larger current draws are coming from the fuel pump. The PNP kit comes with heatsinks for the most heat-sensitive and heat-producing components in the EKPM3 / EKPM2 to further increase cooling effectiveness. When paired with a potent 5015 blower fan that directs a large amount of airflow through the cooler housing, the EKPM3 / EKPM2 stays significantly cooler, which prolongs the life of the module. We also recommend anyone using a larger fuel pump than OEM to properly code their EKP module with Pro-Tool's built-in "Voltage Fix" feature.

Show More Show Less

F3X/F2X - N20 Silent EKP PNP Cooler Kit - 40mm Noctua Fan

A Must For Cars With Upgraded LPFPs

T#:26471605

Part#: AT234F22BLA40MN2

Ships in 2 Business Days

$ 59.99 USD

Add to Wish List

Qty

$ 59.99 USD

Add to Wish List

The full plug-and-play EKPM3 cooler kit is designed specifically for F22/F30/F31/F34 BMWs using an EKPM3 fuel pump control module. This is recommended for anyone using a low-pressure fuel pump that is larger than the OEM fuel pump. We designed this kit with the help of Island Racewerks. The cooler housing is designed to fit over the EKP module just like the OEM housing and fits with plenty of room in the stock EKP location. The housing is 3D printed using durable PLA+. The full kit is printed and assembled in the U.S.A. by Arc Terminator LLC. Full Kit Contents: 1x EKPM3 Cooler Housing With a single 40mm Noctua Fan 1x 14x14x6mm Heatsink With Thermal Tape 1x 14x9x5mm Heatsink With Thermal Tape 1x 9x9x5mm Heatsink With Thermal Tape (EKPM3 Kit) 4x 4" Zip Ties 1x Alcohol Wipe 1x 2 Amp Mini Blade Fuse Why this kit exists: The EKPM3 and EKPM2 have been shown to overheat and cause vehicle shutdown issues when larger fuel pumps that draw more current than OEM are used. This shutdown comes from critical components on the EKPM3 and EKPM2 overheating when larger current draws are coming from the fuel pump. The PNP kit comes with heatsinks for the most heat-sensitive and heat-producing components in the EKPM3 / EKPM2 to further increase cooling effectiveness. When paired with a potent 5015 blower fan that directs a large amount of airflow through the cooler housing, the EKPM3 / EKPM2 stays significantly cooler, which prolongs the life of the module. We also recommend anyone using a larger fuel pump than OEM to properly code their EKP module with Pro-Tool's built-in "Voltage Fix" feature.

Show More Show Less

BM3 FlexFuel Kit - OEM Fuel Hat Location - BMW F-Series S55/N55 3.0L ...

T#:33746522

Part#: BM3FFKTF55

Ships in 3 Business Days

$ 599.00 USD

Add to Wish List

Qty

$ 599.00 USD

Add to Wish List

We are proud to bring out this truly awesome product that makes getting the required Flex Fuel hardware on your BMW and A9X Supra with incredible ease and minimal effort, in your own driveway.

Our kit is entirely plug-and-play with the factory vehicle harness. No cutting or splicing of OEM wiring/connectors. It installs in minutes and can be removed without a trace on the car!

Our team used SolidWorks to design a Flow Optimized Flex Fuel Sensor Adapter (FFSA) to ensure fuel flow is unobstructed and with no added pressure drop at full fuel pump flow from the fuel tank to your motor when our kit is installed. This is important when pushing the factory fuel system with all the power Ethanol can provide over petrol!

Flex fuel sensor housing is designed to neatly install into the factory BMW fuel hat location.

Flex Fuel Sensor Adapter also contains two 1/8 NPT ports that allow installation of an auxiliary Fuel Pressure sensor for vehicles that don’t come with an OEM one from the factory for future use. Depending on fitment, either port can be used.

Install the bootmod3 Flex Fuel Plug and Play Kit and flash your flex fuel enabled bootmod3 OTS MultiMap or Custom Map in minutes and you’re off to the races never worrying about alcohol/petrol blend % in your fuel tank. It does not get better or easier than this!

bootmod3 FlexFuel Plug and Play Kit:

Minutes to install at home as opposed to hours at a shop with car up on lift fabricating/cutting into factory fuel lines and splicing/cutting/pinning into OEM electrical
4+ hours in time/cost savings to get going on Flex Fuel as compared to most other kits that require making custom fuel lines, fittings and custom wiring!
Fully reversible/removable and back to stock without a trace in minutes
Custom 3-piece Aluminum-6061 Flex Fuel sensor adapter with built-in sensor bypass to allow for obstruction free fuel flow made to fit in the vehicle factory fuel hat area below the rear seat
All connecting points sealed with fuel safe Viton o-rings
Flex Fuel Sensor Adapter housing provides additional 1/8 NPT ports for optional Fuel Pressure sensor addition to vehicles without a factory one for bootmod3 CustomROM v2 support
CANBUS Enabled Ethanol Content Analyzer (ECA) that integrates with bootmod3 CustomROM for complete and seamless conversion of your BMW to FlexFuel for bootmod3 Flex Fuel enabled OTS MultiMaps and custom tunes with your bootmod3 tuner of choice
Power/CANBus 4-wire plug and play harness
- 100% Fully Plug and Play harness to the BMW Fuel Controller connectors (EKP3) on S55, N55 vehicles
- 100% Fully Plug and Play harness on the BMW Body Domain Controller (BDC/FEM) connector on Gen1 F-series B48/B58
Continental Flex Fuel sensor 3-wire harness
Custom Aluminum-6061 CANBus Enclosure for the bootmod3 ECA board
Custom, kink-free teflon braided line allowing plug and play installation with the OEM fuel hat and factory 5/16” or 3/8” fuel feed line. No cutting or new lines required.
-6 AN fitting by Racetronix

OEM FUEL HAT LOCATION KIT IS INTENDED FOR OEM FUEL PUMP AND ASSOCIATED WIRING. ANY VARIATIONS TO FUEL LINES OR FUEL PUMPS MAY NOT BE COMPATIBLE. USE THE ENGINE BAY INSTALLATION KIT WHERE AVAILABLE INSTEAD.

Show More Show Less

BMW E60 M5 Crank Case Test Cap

T#:6924319

Part#: AGA-6061-TC

Ships in 8 Business Days

$ 99.99 USD

Add to Wish List

Qty

$ 99.99 USD

Add to Wish List

BMW E60 M5 Crank Case Test Cap

The BMW E60 M5 Crank Case Test Cap is designed to facilitate accurate testing of crankcase pressure across a range of vehicle models. This versatile test cap is compatible with early and late model vehicles equipped with steel, aluminum, or plastic valve covers. Featuring a multi-diameter fitting, it connects directly to IMIBs, handheld manometers, and smoke machines, eliminating the need for adapters and ensuring precise readings without leaks.

Benefits:

Versatile Compatibility: Suitable for use with steel, aluminum, and plastic valve covers on early and late model vehicles.
Direct Connection: Multi-diameter fitting allows direct connection to IMIBs, handheld manometers, and smoke machines.
Leak Prevention: Eliminates the need for adapters, reducing the risk of leaks and inaccurate readings.
Enhanced Accuracy: Provides reliable crankcase pressure testing for better diagnostic results.

Show More Show Less

Pure Turbos N55 PURE600 Turbo Upgrade - BMW N55 3.0L w/ EWG

For vehicles with production date from 07/2013

T#:46444175

Part#: N55PURE600EWG

In Stock

$ 2,589.00 USD

Add to Wish List

Qty

$ 2,589.00 USD

Add to Wish List

Upgrade your N55's turbocharger to Pure Turbo's PURE600 upgrade to make increased power without sacrificing drivability or reliability.

Multi-Pump Fuel Surge Tank (MPFST)

T#:31059457

Part#: 20-1440

In Stock at Vendor

$ 549.99 USD

Add to Wish List

Qty

$ 549.99 USD

Add to Wish List

OEM Elring Cylinder Head Bolt Set - N20/26 2.0L

2X Entries Into Our F80 M3 Sweepstakes

T#:2602240

Part#: 11122212157

In Stock

$ 75.99

This product was last offered at the strikethrough price on
05-07-2026

$ 47.99 USD

Add to Wish List

Qty

$ 47.99 USD

Add to Wish List

If you remove your cylinder head replacement head bolts are a must. These bolts are designed to be torqued down and not reused.

OEM Febi Eccentric Shaft - BMW N55 S55 3.0L

We Price Match - Give Us A Call or Chat!

T#:31522948

Part#: 11377589883F

Ships in 2 Business Days

$ 1,014.96

This product was last offered at the strikethrough price on
05-30-2026

$ 923.38 USD

Add to Wish List

Qty

$ 923.38 USD

Add to Wish List

The eccentric shaft is an important component of BMW's Valvetronic system, a form of variable valve lift control. If the teeth on the gear or the lobes have worn out, this can result in improper valve lift, decreased or abnormal performance, and even damage to cylinder head components. Replace your eccentric shaft with this high-quality part from OEM Febi to restore performance and eliminate valve lift issues without the marked-up price of a Genuine BMW eccentric shaft.

Show More Show Less

Evolution Raceworks B48 Charegepipe - Black Anodized - BMW F22/23 F3X...

T#:587528

Part#: BM-ICP019-T3

Ships on Dec 1, 2026

$ 359.99 USD

Add to Wish List

Qty

$ 359.99 USD

Add to Wish List

The factory charge pipes are made of plastic, which is fine for stock boost levels but does not hold up well under higher boost levels. The solution is to replace that plastic piece with a hard aluminum one from Evolution Racewerks. 6061 high-grade aluminum not only stands up to whatever you can throw at it, but it looks great at the same time. Don't risk detonating that 400.00 plastic pipe from BMW. Swap yours out and avoid the headache of needing to call a tow-truck or drive home in limp. Features: Increase throttle response and decreases turbo lag. Lightweight High Grade 6061 Aluminum Piping. Replaces the factory soft plastic charge pipe that is prone to breaking under high boost. Retains factory-style o-ring c-clip lock flange. Precision CNC machined MAP sensor and IAT flanges ensure a leak-free connection. Charge Pipe features beaded ends and T-bolt clamps to prevent intercooler piping from coming off from boost. Silicone Hump Hose included. Type III Hard Black Anodizing (for stealth and OEM look). Hard anodizing helps improve the durability of intercooler piping. Resists bent or dented piping. Compatible with the factory electronic diverter valve. Includes all hardware for a complete installation. Limited Lifetime Warranty.

Show More Show Less

Pure Turbos N55 Turbo Installation Kit - N55 3.0L

T#:590383

Part#: PUREN55INSTKIT

Ships in 10 Business Days

$ 233.99 USD

Add to Wish List

Qty

$ 233.99 USD

Add to Wish List

Includes everything you need to install your upgraded turbo from Pure Turbos.

Genuine BMW Rear main seal cover - N20 2.0L

T#:32654

Part#: 11217588968

Ships in 1-2 days

5% off MSRP $ 59.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 56.99 USD

Add to Wish List

Qty

5% off MSRP

$ 59.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 56.99 USD

Add to Wish List

Genuine BMW Reluctor -
This item fits the following BMW Chassis:
E89 Z4,F10,F22,F25 X3,F26 X4,F30,F31,F32,F33,F34,F36

Fits BMW Engines including:
N20,N26

Show More Show Less

Genuine BMW Rubber Engine Mount - Right

T#:177179

Part#: 22116855460

Ships in 1-2 days

6% off MSRP $ 186.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 174.99 USD

Add to Wish List

Qty

6% off MSRP

$ 186.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 174.99 USD

Add to Wish List

Genuine BMW Rubber Mounting Right -
This item fits the following BMW Chassis:
F22,F30,F32,F33,F36

Genuine BMW Fuel Pump Control Unit - F3X F22/23/87 F10/12/13 N20 N55 ...

T#:536513

Part#: 16147411596

Ships in 1-2 days

4% off MSRP $ 471.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 450.99 USD

Add to Wish List

Qty

4% off MSRP

$ 471.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 450.99 USD

Add to Wish List

Located in the trunk, this control module regulates your BMW's fuel pump.

Genuine BMW Turbocharger Hardware Kit - E84 F10 F26 F25

T#:543544

Part#: 11652411444

Ships in 1-2 days

6% off MSRP $ 206.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 195.00 USD

Add to Wish List

Qty

6% off MSRP

$ 206.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 195.00 USD

Add to Wish List

This installation kit includes the components recommended by BMW for replacement whenever the N20 turbocharger is removed from the engine and reinstalled. Reusing existing seals, gaskets, and hardware can result in exhaust and/or oil leaks, so we recommend replacing them anytime you need to remove the factory turbo or install an upgraded turbo.

Show More Show Less

Genuine BMW Set Bolt Cylinder Head - N55

T#:22172

Part#: 11122165470

In Stock

6% off MSRP $ 125.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 118.00 USD

Add to Wish List

Qty

6% off MSRP

$ 125.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 118.00 USD

Add to Wish List

Genuine BMW Set Bolt Cylinder Head - Torx
This item fits the following BMW Chassis:
E71,E82,E90,E92,E93,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4,F30,F32,F33,F34,F36

Fits BMW Engines including:
N55

Show More Show Less