Engines make more power when you're able to move as much air and fuel as possible through them. However, air density is just as important as air volume. Cooler air is denser air, so in addition to keeping your engine cool, it's important to make sure that your intake charge is as cool as possible. Turner Motorsport's upgraded intercooler works to reduce air temperatures with a bare minimum of pressure drop. Less pressure drop means less restriction, and a turbocharger that doesn't have to work as hard. This results not only in a longer service life for your turbocharger, but a substantial increase in performance as well.

The stepped design increases volume and surface are in a limited space by adding an additional smaller core at the top of the intercooler. Both cross sectional area and frontal surface area are increased by a whopping 56%, with a design that still weighs under 20 pounds. On the stock intercooler, the temperature differential between the inlet and outlet sides of the intercooler represented a 95 degree drop. With the Turner Motorsport intercooler, that drop was increased to a chilling 140 degrees. The dyno results don't lie: as a bolt-in upgrade, expect gains of 18 wheel horsepower and 10 lb/ft of torque. With a tune and supporting modifications, further gains are possible, up to 36 horsepower and 28 lb/ft of torque.

This cast aluminum intercooler features an attractive, easy to clean matte black finish, with etched Turner logos on the front and bottom. If you're looking for the ultimate cooling system upgrade for your turbo BMW, look no further.

• Cast aluminum construction
• Bar and plate design
• 56% increase in frontal surface area & cross sectional area
• Decrease in temperature of 45 degrees from inlet side to outlet side (95 degree drop stock on outlet side vs. 140 degree drop on Turner outlet side)
• Significantly less restriction (pressure drop of consistently 0.75 psi vs. 1.5-2.5 psi stock)
• +18HP/10TQ (+36HP/28TQ with tune and supporting mods)
• Weighs under 20 lbs.
• Overall size: 520mm wide, 210mm tall
• Mounting hardware inlcuded

Upgrade to the following OE Intercoolers: 17517600531, 17517600530, 17517618809

Fits the Following BMWs:

F22 F23 228i 228i M235i M235ix

F30 F31 F32 F33 F34 F36 328i 328ix 335i 335ix 428i 428ix 435i 435ix

BMW N54 Port Injection Intake Manifold With 750cc Injectors And Fuel Line Kit - Phoenix Racing is a high-performance upgrade engineered to replace the stock plastic intake manifold on BMW N54 engines. Constructed from durable, lightweight aluminum, this manifold increases airflow and strength, delivering reliable performance for both street and track applications. Integrated with top-mount port injection bungs, this manifold ensures optimal fuel delivery and spray patterns for maximum efficiency. The Phoenix Racing kit includes calibrated 750cc injectors and a plug-and-play fuel line, making it ideal for drivers aiming for high horsepower and seamless installation. Available through Turner Motorsport.

• Replaces the factory plastic manifold with high-strength aluminum for increased durability and performance
• Supports increased airflow to enhance engine power and efficiency
• Integrated top-mount port injection bungs optimize fuel injector spray and delivery
• Includes calibrated 750cc injectors and plug-and-play fuel line for a complete port injection solution
• Multiple expansion vacuum ports support blow-off valves, boost gauges, Hobb’s switches, and more
• High-quality, high-temperature o-rings provide lasting durability and reliability
• Exclusively available through Turner Motorsport, ensuring trusted quality and service

K&N Aerosol Air Filter Cleaning Kit provides a simple and effective solution to preserve and maintain your K&N air filter, ensuring it delivers optimal performance for a lifetime. This cleaning kit is specifically designed to clean and restore the airflow efficiency of your reusable air filter, saving you money by eliminating the need to purchase replacement filters.

The K&N Aerosol Air Filter Cleaning Kit includes a powerful degreaser that effectively removes dirt, grime, and contaminants from your air filter. Once cleaned, the kit’s specialized oil is used to recoat the filter, ensuring it continues to trap harmful particles while allowing maximum airflow.

Regular maintenance with this kit not only extends the life of your air filter but also enhances your engine’s performance by maintaining high air flow and exceptional filtration. Easy to use, the K&N Aerosol Air Filter Cleaning Kit is an essential tool for keeping your air filter in top condition.

• Lifetime filter maintenance: Extends the lifespan of your K&N air filter, eliminating the need for replacements.
• Improved engine performance: Restores airflow efficiency for optimal engine operation.
• Cost-effective solution: Saves money by allowing you to maintain your existing air filter.
• Easy application: Simple-to-use aerosol spray for cleaning and re-oiling.

BMW N20 N26 Replacement Air Filter | Dinan High Flow Drop-in from Turner Motorsport is designed to reduce maintenance costs and enhance engine performance. This high-flow, washable air filter uses advanced materials to improve airflow and increase power while reducing engine strain.

• Enhanced Performance: High-flow design improves airflow, leading to a noticeable increase in engine power.
• Washable and Reusable: Easily cleanable, offering a cost-effective alternative to disposable filters.
• Improved Engine Efficiency: Reduces engine strain by allowing it to breathe more freely, resulting in better performance.
• Easy Installation: Drop-in design ensures a hassle-free fitment for BMW N20 and N26 engines.
• Cost-Effective Maintenance: A durable option that lowers long-term maintenance expenses.

Silicone Coupler - Straight 3" ID (76.20mm) x 3" L

No matter the project, ECS Tuning silicone couplers and elbows offer a high-quality, precision-engineered solution to your needs. Whether you're installing an intercooler, fabricating a custom intake system, or whatever else you can dream up, ECS Tuning has you covered.

• High-quality silicone construction for durability
• Precision-engineered design ensures a perfect fit
• Versatile solution for various automotive projects
• Enhances performance and reliability
• Compatible with BMW and other vehicles

Airflow efficiency and maximizing the potential of the stock intake design were the keys to development for the Dinan N55 intake. Dinan improves on the factory air box system by delivering more cool, dense air. The increased amount of air feeds into dual larger volume airbox complete with a larger cone filter that elicit a slightly more audible and sporty tone over its stock counterpart. Dinan claims 10hp and 15ft-lb torque gain with this kit.

For over 35 years, Dinan has been America's premier tuning company, pioneering advancements in BMW modification while retaining a focus on balanced performance that preserves the original character and driving feel that a BMW offers. When you install a Dinan part on your car, know that it's not only carefully developed and tested, but that Dinan stands behind it with a four year, 50,000-mile warranty. Dinan believes so fully in their “total package” approach that once your car has been fitted with enough of their parts, they celebrate your conversion from stock to Dinan with an exclusive trunk badge, displayed proudly by BMW enthusiasts everywhere. This intake is worth 3 points toward your Dinan badge.

Fitment note: Convertible models require modification to a factory chassis brace. Detailed instructions are included.

This item fits the following BMWs:
2014+ F22 F23 BMW M235i M235iX
2012-2015 F30 BMW 335i 335i X-Drive - Sedan
2012-2016 F32 BMW 435i 435i X-Drive - Coupe
2013-2016 F33 BMW 435i 435i X-Drive - Convertible
2012-2015 F34 BMW 335i 335i X-Drive - Gran Turismo
2012-2016 F36 BMW 435i 435i X-Drive - GranCoupe

Following in the footsteps of the immensely popular and heralded intake for the BMW N55 engine, the next generation of 6 cylinder intake takes the same path to success. Improve upon the factory design by increasing flow via a larger air box and filter element thereby improving throttle response and lessening the strain on the turbocharger for maximum efficiency. While box and filter enlargement and redesign is a major factor in ultimately producing a more  potent intake they are not the only variables in creating a more efficient design either. The devil is in the details which is where Dinan thrives. Coupled with maintaining Dinan's standard practice of utilizing a sealed system to ensure as much cold, outside air as possible is employed Dinan engineers focused their attention on the intake pipe itself where numerous improvements could be made. In factory configuration the intake tube comes complete with baffling and a small helmholtz chamber to reduce unwanted sound. As a byproduct these features also cause a more turbulent air flow path which robs the factory system of potential power. These 2 specific details are diametrically opposed to our intended markets desires so the removal of these features was paramount. Through numerous iterations a carbon fiber intake tube was developed that eliminated flow disruptions and allowed the natural sound of an unimpeded intake tract to sing. All told this thorough methodology of design allows the Dinan carbon fiber cold air intake for the B58 engine to elicit gains of 15 HP and 13 TRQ @ 6000 RPM on a completely stock vehicle. An impressive feat on today's turbocharged engines.   

Not to be outdone by the performance side of the equation the B58 intake also is completely made up of carbon fiber unlike 6 cylinder intakes of the past where a mix of materials was used. Not only is the intake completely carbon construction but the quality of the material has been improved over previous generations as well. While looks are surely important, and this piece has that department covered in spades, the improved construction and coating also guarantees that the appearance of the engine bay with the Dinan intake will not be marred over time. Built to present well, perform well, and last the duration, the Dinan B58 carbon fiber cold air intake is a modification that is a must for any high high performance build.  

Benefits of the Dinan Carbon Fiber High Flow Air Intake for the F22/F23 M240i, F30/F34 340i and F32/F33/F36 440i:

• More Power: +15 HP & +13 lb-ft of torque @ 6000 RPM without additional modifications (13 WHP / 11 WTQ)
• Sportier Sound
• Improved throttle response
• Larger volume air box (30% larger than stock) that completely seals
• 34% increase in filter area (stock: 76.3in², Dinan: 102.1in²) 
• Optimized carbon fiber intake tube 
• Free flowing injection molded Air Mass Meter housing (8% larger then stock)
• Quick and easy installation

The Dynamic Air Scoop (D.A.S.) from aFe Power is a very simple, bolt-on product that increases air flow and velocity through the factory kidney bean grille. This lightweight rotomold intake scoop is black for a stealth appearance. You will notice the improved throttle response as the speed of your intake air flow is increased.

This scoop is a perfect addition to an aFe Stage 2 Sealed intake system part number 54-82202 and 51-82202. All necessary hardware is included.

The turbocharger coolant line plays a critical role in your vehicle's cooling system, helping to regulate heat and ensure the turbocharger operates efficiently. These lines, which include both inlet and return components, are typically constructed from durable materials such as metal, rubber, or plastic composites.

Over time, repeated heat cycles and aging can cause these lines to degrade, leading to cracks, leaks, and compromised cooling performance. If left unresolved, a failing coolant line can result in engine overheating and potential turbocharger damage. For vehicles with composite plastic lines, replacing them during any removal or maintenance is highly recommended to maintain a secure seal and reliable operation.

K&N's drop-in air intake filter is constructed from cotton gauze material between aluminum mesh - this makes for a long lasting, high performance drop-in intake filter. These are very easy to remove and maintain. Turner Motorsport recommends this as one of the first maintenance/modifications you make to your vehicle after you purchase! 

K&N's drop in air filters allow increased airflow - dirt and particles stick to the oil on these filters, making them more effective than traditional paper filters in terms of protection. Additionally, K&N believes their filters are more efficient than paper filers - this means more oxygen getting into the engine, allowing vaporized fuel to burn more efficiently and increasing horsepower and fuel economy. The best of both worlds!

• Covered by the K&N Million Mile Limited Warranty
• Washable and reusable
• Emissions legal in all 50 states
• Will not void vehicle warranty