AFE for BMW 4 Series F32 (2014+)

Bring your aFe filter back to life with a Restore kit from aFe. Included is filter cleaner & replacement oil. These air filter oils is designed to not harm MAF sensors, while allowing the filter to catch as much debris as possible.

Used for Pro 5 R filters

7" Tall Air Filter:
This intake system utilizes an oil-free, 7" tall conical 360-degree radial flow performance air filter with 5-layers of progressive finer mesh cotton media providing maximum airflow and performance.

High-Quality Tube:
This system uses a high quality, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit.

Lightweight Vacuum Form Plastic Cover w/ Auxiliary Air Inlet:
Creates a stealthy under-hood look while reducing air intake noise without sacrificing power. A urethane plug is also included if you wish to block off the auxiliary air inlet.

Hassle-Free Installation:
All clamps, coupling, and hardware are included for hassle-free installation. This is a direct bolt-on kit that requires no cutting or drilling on factory parts.

Note 1:
Does NOT fit Convertible models.

Note 2:
This product is not currently CARB exempt and is not available for sale in California or for use on any vehicle registered with the California Department of Motor Vehicle.

This part fits the following BMWs:
F3X B58 
 

7" Tall "Oil Free" Air Filter:
This intake system utilizes an oil free, 7" tall conical 360 degree radial flow performance air filter with 3-layers of synthetic media providing maximum airflow and performance.

High Quality Tube:
This system uses a high quality, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit.

Carbon Fiber Look Cover w/ Auxiliary Air Inlet:
This carbon fiber look cover is constructed with lightweight vacuumed formed ABS plastic for underhood appearance. A urethane plug is also included if you wish to block off the auxiliary air inlet.

Hassle-Free Installation:
All clamps, coupling and hardware are included for hassle-free installation. This is a direct bolt-on kit that requires no cutting or drilling on factory parts.

Note 1:
Does NOT fit Convertible models.

Note 2:
This product is not currently CARB exempt and is not available for sale in California or for use on any vehicle registered with the California Department of Motor Vehicle.

The aFe MACH Force-Xp cat-back exhaust system for the BMW N55 exceeds your quality and performance expectations.  3"- 2-1/2" mandrel bent 304 stainless steel tubing and high flow transverse muffler offers maximum exhaust flow and incorporates a factory style exhaust valve to control the exhaust note. The valve utilizes the factory valve motor and factory performance modes. When closed, it directs the exhaust through the high flow muffler for a smooth, tuned exhaust note. When opened, the exhaust is allowed to bypass the muffler and unleash the sound and performance of your N55. Large 4" diameter gloss black stainless steel exhaust tips come with a laser-etched aFe POWER logo for a stylish finish.

DETAILS:

• +12 HP and +10 lbs. x ft. Torque max gains
• 3" - 2-1/2" mandrel bent, 304 stainless steel for maximum flow
• High flow, transverse muffler with a high-temp powder-coated black finish
• Dual 4" diameter gloss black stainless steel exhaust tips
• Includes factory style exhaust valve (using factory motor, not included)
• Optional resonator delete pipe is available PN 49-36622
• 100% hand TIG-welded for strength and durability

Performance Gains:
Data coming soon!

304 Stainless Steel Construction:
3" into 2-1/2" mandrel bent 304 stainless steel tubing for maximum performance, corrosion resistance, durability and overall breath-taking appearance.

High-Flow Performance Muffler:
Featuring a corrosion resistant high temp. metallic black powder-coat this high flow, transverse stainless steel muffler improves sound and performance gains across the power band.

Dual 4" Gloss Black Tips:
Finishing off this system are dual 4" diameter, gloss black, stainless steel exhaust tips. The tips come with a laser-etched aFe power logo for a custom, stylish finish.

Exhaust Valve:
Incorporated is a factory style exhaust valve which uses the factory exhaust valve motor (not included). The valve helps regulate, direct and control the flow of exhaust gases by opening, closing, or partially obstructing passageways depending on throttle position and factory performance mode for maximum performance.

Resonator Delete Pipe:
An optional resonator delete pipe is compatible with this exhaust system (not included, sold separately) aFe part number: 49-36622 (No cutting or fabrication required).

TIG-Welded:
100% TIG-Welded by certified craftsmen for race proven strength and durability.

Hassle-Free Installation:
This exhaust system is designed to be a true bolt on system with no cutting or modifications required. Quality hardware is included for a hassle-free installation.

Note:
Will NOT fit xDrive (AWD) Models

Emissions Disclaimer:
This product does not require a CARB EO# (CARB Aftermarket Parts Verification Guidelines).

All aFe exhaust systems are engineered and manufactured in our Corona, California manufacturing facility.

On turbocharged motors, the intake piping is put under constant pressure while the engine is running, and has to hold that pressure without leaking. Unfortunately the smallest amount of damage or defect on the intake hoses and the pressure can cause a leak, leaving you without proper boost pressure.  Replace your leaking pressure pipe and stop loosing boost.

Product Features and Specifications:

• +13 HP / +13 lbs. x ft. Torque max gains
• Outflows factory intercooler tube by 18%
• Retains the factory style throttle body and intercooler quick connections made from 6061-T6 Billet Aluminum
• 2-1/2" to 3" Cold-Side mandrel-bent aluminum tubing
• Powder-coated wrinkle-black for heat resistance
• 1/8" NPT ports, are provided for connecting pressure sensors or water methanol injection
• 5-Ply Polyester Reinforced Silicone coupling for strength
• Includes premium stainless steel clamps for a secure fit
• For use with the factory or aFe intercooler (46-20231)
• Includes hardware for a hassle-free installation
• For use with manual transmission vehicles ONLY

Exhaust Valve:
This axle-back exhaust system incorporates a factory style exhaust valve which uses the factory exhaust valve motor (not included). The valve helps regulate, direct and control the flow of exhaust gases by opening, closing, or partially obstructing passageways depending on throttle position for maximum performance.

Simple Installation:
This MACH Force-Xp axle-back exhaust system uses factory mounting locations providing stability and a hassle-free installation.

Dual 4" Polished Tips
Finishing off this system are dual 4" diameter, polished, 304 stainless steel tips. The tips come with a laser-etched aFe power logo for an aggressive style.

Leak-Free Seal:
High quality band clamps are used for a complete 360 degree sealing surface. Brushed 304 SS Construction:
The performance axle-back exhaust system is constructed of 3" to 2-1/2" mandrel-bent, brushed 304 stainless steel tubing for maximum performance, corrosion resistance and strength eliminating cracking.

DETAILS:

• Constructed from 100% hand TIG-welded
• 3" to 2-1/2" mandrel bent, brushed finished 304 stainless steel tubing
• Includes a factory style exhaust valve
• Utilizes a unique high flow, transverse muffler with a high-temp powder-coated black finish
• Includes dual 4" diameter, gloss black, 304 stainless steel tips
• Uses all factory hanger locations for a hassle-free installation

Emissions Disclaimer:
This product does not require a CARB EO# (CARB Aftermarket Parts Verification Guidelines).

All aFe exhaust systems are engineered and manufactured in our Corona, California facility.