BMW Engine Parts for BMW 3 Series F34 (2014+)

N20/N26 Mishimoto Baffled Oil Catch Can

T#:389788

Part#: MMBCCN20N2612CB

In Stock at Vendor

$ 278.95 USD

Add to Wish List

Qty

$ 278.95 USD

Add to Wish List

il venting and circulation continues to be a problem on BMW engines and the N20 engine is not immune from this. The existing stock system does a poor job of separating fluid and vapor and this leads to an oily film or even small pools of oil throughout the turbos and intake. Performance issues are caused by oil sneaking by the ring seals and is coating the intake piping, intercooler, intake valves, and other critical areas. The problem is worsened with higher boost levels. Oil is excellent for lubricating moving parts but terrible when it gets into the combustion chamber, effectively lowering the octane rating and reducing performance. Our own shop has gone the extra step and offers media and chemical blasting of the intake valves to strip away the oily buildup we have seen. Our shop also strongly recommends an oil catch can be installed in the line for the crankcase vent. The oil catch can traps oil as it leaves the valve cover and holds it in a canister. This catch can is located on the cooler side of the engine where the oil will condense easier and stay in the can. Whatever minimal vapors are left over in the oil is then vented back through the canister and into the intake where it is safe to be burned up in the engine or recirculated back through the system again. This is the way the system was designed! At each oil change simply unscrew the canister and empty the trapped oil with your regular used oil. Installing one of these will avoid costly repairs in the future and help maintain your boost and performance. It's one of the smartest modifications you can make because it demonstrates a well-thought out tuning strategy and care for the condition of your engine. The Mishimoto Oil Catch Can is made from aluminum and with a stealthy black anodized finish. It installs on the cooler side of the engine with a dedicated bracket and new oversized vent lines. The location is key as heat will evaporate the oil and send too much vapor back into the engine (where cooler air will turn it back into fluid). Note: Since the crankcase vent system is considered part of the overall emissions system, installing this may be a violation of local, state, and federal laws. While exemptions are made for track/race and off-road use, check with your local state inspection facility on using this in street-driven vehicles. This item fits the following BMWs with the N20 or N26 turbo engine: 2014-2016 F2X 228i 228i xDrive 2012-2016 F3X 320i 320i xDrive 328i 328i xDrive 428i 428i xDrive WARNING! Prop 65 may apply to this product. Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968) is a California law that applies to call companies selling products in California. Prop 65 requires any listed chemical present above very low levels that are known to cause cancer, birth defects, or other reproductive harm. For more information about California Prop 65 warning see: www.P65Warnings.ca.gov.

Show More Show Less

OEM Elring Cylinder Head Bolt Set - N20/26 2.0L

2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:2602240

Part#: 11122212157

In Stock

$ 75.99

This product was last offered at the strikethrough price on
05-07-2026

$ 47.99 USD

Add to Wish List

Qty

$ 47.99 USD

Add to Wish List

If you remove your cylinder head replacement head bolts are a must. These bolts are designed to be torqued down and not reused.

Engine Main Bearing Kit - 0.50mm Oversized

+0.50mm

T#:26504931

Part#: MB5784SI0.5

In Stock at Vendor

$ 145.99 USD

Add to Wish List

Qty

$ 145.99 USD

Add to Wish List

Introducing King Main Bearings for BMW Engines: the ultimate solution for enhancing your engine's performance. Crafted with precision and expertise, King's bearings offer unmatched durability and reliability. Designed to meet the demands of high-performance driving, they provide the stability and support your engine needs. Elevate your BMW driving experience with King Bearings. Complete Set: King Main Bearings for BMW Engines come as a full set. Silicon-aluminum Bi-Metal Construction: Crafted from King's premium Silicon-aluminum bi-metal material offering exceptional strength, durability, and heat resistance. Precision Engineering: Engineered with meticulous attention to detail, our bearings are designed to exacting standards to ensure optimal fitment and compatibility with BMW engines. Enhanced Performance: Experience improved engine stability and smoother operation with King Bearings.

Show More Show Less

Billet Oil Thermostat Lid

T#:21045480

Part#: BMS-TLID

Ships in 1 Business Day

Starting at $ 39.00 USD

Add to Wish List

Starting at $ 39.00 USD

Add to Wish List

These billet CNC replacement aluminum oil thermostat lids and caps are an excellent way to add some color and style to your N54 N55 S55 engine bay. Anodized black, red or blue. Easy to install and made in the USA. Can be used with or without the BMS Sport Oil Cooler Valve.

Show More Show Less

BOSCH High-Pressure Fuel Pump - N20 N26 2.0L

2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:639092

Part#: 13517584461

In Stock at Vendor

$ 459.99

This product was last offered at the strikethrough price on
05-07-2026

$ 446.99 USD

Add to Wish List

Qty

$ 446.99 USD

Add to Wish List

This is the high-pressure fuel pump for BMW's with the N20 turbo engine. Bosch High-Pressure Pump - This item fits the following BMW Chassis: E89 Z4,F10,F22,F25 X3,F26 X4,F30,F31,F32,F33,F34,F36 Fits BMW Engines including: N20,N26

Show More Show Less

Piston Ring Comp 2-1/8" to 5"

T#:2242222

Part#: W80572

Ships in 1 Business Day

$ 21.99 USD

Add to Wish List

Qty

$ 21.99 USD

Add to Wish List

Use to install pistons on most passenger cars and truck engines

BMW N55 S55 Ferrea High Performance Valve Kit

T#:23416508

Part#: FER-HPVK-S55-T-3

Ships in 3 Business Days

$ 929.99 USD

Add to Wish List

Qty

$ 929.99 USD

Add to Wish List

Increase the power output of your N55/S55 engine with the high-performance Ferrea valve kit. Renowned as the industry's most reliable extreme-duty valves, they're meticulously crafted from aerospace-grade alloys, employing an exclusive two-step slow forging process for optimal grain flow and material structure integrity. A 48-hour heat treatment and stress-relieving process enhance molecular integrity. The valves feature avionics-quality hard chrome and a specially applied hard tip. Standard size: 32mm intake / 28mm exhaust, with a triple groove valve design. Compatible with factory valve locks ("Valve Keepers"), the kit includes 12x Intake Valves and 12x Exhaust Valves for a comprehensive engine upgrade!

Show More Show Less

Fuel-It! B58 BMW High Pressure Fuel Pump (HPFP) Upgrade - Stage 1 ...

T#:17106920

Part#: BMW-B58HPFP-A01

Ships on Aug 18, 2026

$ 1,499.00 USD

Add to Wish List

Qty

$ 1,499.00 USD

Add to Wish List

Introducing the new B58 BMW HPFP upgrade kit from Fuel-It! Replaces your factory high-pressure fuel pump with a higher capacity pump capable of supporting 30% more flow with Stage1 or 60% more flow with Stage2! Includes all required installation hardware for a clean plug and play install. Includes: Upgraded High-Pressure Fuel Pump (HPFP) Billet Adapter Plate Billet Center Alignment Tool Low-pressure Line (Triple lined crimped fittings PTFE/SS/Nylon Braided) Custom Harness and Hardware

Show More Show Less

BMW Rod Bolt Stretch Gauge with Billet Body & Thumb Hold

T#:4309

Part#: 100-9942

In Stock at Vendor

$ 216.99

This product was last offered at the strikethrough price on
03-05-2026

$ 202.99 USD

Add to Wish List

Qty

$ 202.99 USD

Add to Wish List

We highly recommend using a stretch gauge when installing rod bolts and other fasteners, where it is possible to measure the length of the fastener.

POR15 Absolute Coatings Fuel Tank Sealer

T#:1575841

Part#: POR49216

Ships in 6 Business Days

$ 40.99 USD

Add to Wish List

Qty

$ 40.99 USD

Add to Wish List

POR-15 Fuel Tank Sealer was formulated and developed in our own laboratories due to the demand for a high-tech sealer impervious to all fuels, including the new Stage II fuels which have a high alcohol content.

Show More Show Less

BMW Fuel Injector Seal Pliers And Seal Installers

T#:641886

Part#: B130190KIT

Ships in 5 Business Days

$ 219.99 USD

Add to Wish List

Qty

$ 219.99 USD

Add to Wish List

Includes 130190, 130191 and 130280

Pure Turbos N55 Stage 2 Turbo Upgrade - BMW N55 3.0L w/ EWG

For vehicles with production date from 07/2013

For vehicles with electronic waste gate (EWG)

T#:578281

Part#: PURE-N55-0004KT

Ships on Sep 21, 2026

$ 3,114.99

This product was last offered at the strikethrough price on
07-13-2026

$ 3,000.00 USD

Add to Wish List

Qty

$ 3,000.00 USD

Add to Wish List

As BMW enthusiasts, we admittedly did not know how to feel when BMW moved to forced induction. We loved the naturally aspirated power that the NA straight six produced, but Pure Turbos has been able to prove time and time again what a forced induction BMW powerplant is capable of putting down. Here at Turner Motorsport, we trust Pure Turbos to meet all of your power desires - after all, there's a reason the majority of the fastest forced induction BMWs on the road are running Pure Turbos. Looking for massive gains out of your N55 powered BMW? This Stage 2 turbo upgrade kit from Pure Turbos can allow you to achieve over 500whp reliably with supporting modifications! This price includes a $500 core charge that is refunded once we receive your rebuildable core. This upgrade kit features: Upgraded high flow turbine wheel Upgraded point-milled billet compressor wheel Dual oil seals on both compressor and turbine Large diameter 360 thrust upgrade Extensive turbofold modifications and machining Direct fit, as OEM, as these utilize OEM housings Featuring a limited 1 year warranty. For vehicles with electronic waste gate (EWG)

Show More Show Less

Victor Reinz Valve Seal Repair Kit - Intake

T#:377087

Part#: 11340034068

Ships in 1 Business Day

$ 54.99

This product was last offered at the strikethrough price on
05-07-2026

$ 53.99 USD

Add to Wish List

Qty

$ 53.99 USD

Add to Wish List

Seal fitted to the end of the valve

BMW N20 2.0L Front Oxygen Sensor

2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:35863152

Part#: 11787589121

In Stock

$ 84.99 USD

Add to Wish List

Qty

$ 84.99 USD

Add to Wish List

BMW N20 2.0L Front Oxygen Sensor - 11787589121 is a high-quality direct-fit replacement designed to restore precise air-fuel ratio measurements for optimal engine efficiency. This oxygen sensor ensures accurate emissions control and fuel economy by delivering real-time data to the engine management system. Built with durable materials to withstand extreme exhaust temperatures, it guarantees long-lasting performance and reliability. Featuring an easy plug-and-play connection, this sensor simplifies installation while maintaining OE-level precision.

Guaranteed fitment for seamless installation and proper functionality
Direct-fit OE replacement design restores accurate air-fuel mixture regulation
Easy plug-and-play connection for hassle-free installation
High-quality materials withstand extreme exhaust system heat for durability
Alloy conductors minimize electrical resistance for precise sensor operation
Backed by a 24-month unlimited mileage warranty for added confidence

Ensure optimal fuel efficiency and emissions performance by replacing your worn-out oxygen sensor with this premium-quality BMW N20 2.0L Front Oxygen Sensor.

Show More Show Less

Evolution Raceworks B48 Charegepipe - Black Anodized - BMW F22/23 F3X...

T#:587528

Part#: BM-ICP019-T3

Ships on Aug 20, 2026

$ 359.99 USD

Add to Wish List

Qty

$ 359.99 USD

Add to Wish List

The factory charge pipes are made of plastic, which is fine for stock boost levels but does not hold up well under higher boost levels. The solution is to replace that plastic piece with a hard aluminum one from Evolution Racewerks. 6061 high-grade aluminum not only stands up to whatever you can throw at it, but it looks great at the same time. Don't risk detonating that 400.00 plastic pipe from BMW. Swap yours out and avoid the headache of needing to call a tow-truck or drive home in limp. Features: Increase throttle response and decreases turbo lag. Lightweight High Grade 6061 Aluminum Piping. Replaces the factory soft plastic charge pipe that is prone to breaking under high boost. Retains factory-style o-ring c-clip lock flange. Precision CNC machined MAP sensor and IAT flanges ensure a leak-free connection. Charge Pipe features beaded ends and T-bolt clamps to prevent intercooler piping from coming off from boost. Silicone Hump Hose included. Type III Hard Black Anodizing (for stealth and OEM look). Hard anodizing helps improve the durability of intercooler piping. Resists bent or dented piping. Compatible with the factory electronic diverter valve. Includes all hardware for a complete installation. Limited Lifetime Warranty.

Show More Show Less

Eventuri Black Carbon Fiber Engine Cover - F22 M235i F3x 335i 435i ...

T#:399995

Part#: EVE-N55-ENG

Ships in 5 Business Days

$ 950.00 USD

Add to Wish List

Qty

$ 950.00 USD

Add to Wish List

Bespoke. A word that perfectly encapsulates the mindset of Eventuri. Performance parts with an obsessive attention to detail and an unyielding dedication to quality. Perfectly designed to maximize the potential of each individual vehicle and meticulously refined through rigorous testing. Eventuri offers a product that stands in a class of its own and delivers outstanding power increases without making false claims or exaggerating dyno numbers. With patented designs such as a custom velocity stack filter housing and improved ducting that guides the flow of air into the engine, to the breathtaking uniformity of the weave pattern. These are performance products for the truly discerning customer.

When it comes to styling a vehicle the proper look is one that compliments, not cheapens the inherent design. Race inspired carbon fiber completes the look and style of every BMW M-powered model and Eventuri delivers on an entirely new level. Instead of simply offering black carbon and yellow kevlar that has become the norm, Eventuri has stepped things up by offering their carbon/kevlar accessories in multiple colors. Now you can choose between Blue, Red, Orange and Yellow weave to further set your ride apart from the pack.

This Lightweight Kevlar engine cover will replace the cheap looking factory black plastic one that came on the vehicle. Dress up the engine bay and give it the look to match the power within. Easy installation does not require any drilling and factory hardware can be reused.

Features:

Factory fit and finish
Lightweight and strong Kevlar construction
Easy no-drill installation
Now available in orange weave color

This product fits the following BMWs:
2016+ F87 M2

Show More Show Less

Shaft Seal - Priced Each

2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:638353

Part#: 11118604931

In Stock at Vendor

$ 28.99 USD

Add to Wish List

Qty

$ 28.99 USD

Add to Wish List

Corteco Engine Mount - Right - 22116787668

T#:25507160

Part#: 22116787668

In Stock

$ 163.99

This product was last offered at the strikethrough price on
04-20-2026

$ 145.99 USD

Add to Wish List

Qty

$ 145.99 USD

Add to Wish List

Helps absorb engine vibration and reduce cabin noise while maintaining correct engine positioning under all driving conditions.

IP High Performance Ignition Coil Set - B58

T#:1637697

Part#: IP-A122613

Ships in 5 Business Days

$ 1,055.00 USD

Add to Wish List

Qty

$ 1,055.00 USD

Add to Wish List

Ignition Projects is a Southern California based company that specializes in innovative ignitions products. Their mission is to develop stronger ignition systems in order to optimize engine performance and improve emmissions/consumption. All of their products are developed and manufactured here in Tustin, CA, right here in the US!

Show More Show Less

OEM Elring Cylinder Head Gasket (+0.3mm) - N20/26 2.0L

2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:2691314

Part#: 11128676514

In Stock at Vendor

$ 149.99

This product was last offered at the strikethrough price on
05-07-2026

$ 145.99 USD

Add to Wish List

Qty

$ 145.99 USD

Add to Wish List

Symptoms of a necessary head gasket replacement may include: oil and coolant mixture found in your engine (also referred to as "milkshake"), misfires from a cylinder losing compression, or just if the cylinder head is removed from the vehicle. This multi-layer steel head gasket has raised printed seals, for improved sealing of fluid passages. Purchase head bolts and related attachment hardware and gaskets separately.

Show More Show Less

URO Engine Oil Pan Gasket - BMW E84 F3X F10 E89 N20 N26 2.0L ...

2X Entries For Our G87 M2 Sweepstakes!

T#:32781447

Part#: 11137618512PRMK

In Stock

$ 28.99 USD

Add to Wish List

Qty

$ 28.99 USD

Add to Wish List

When removing your oil pan, it is always a good idea to replace the gasket to ensure you don't experience leaks when the pan is re-installed. This gasket is designed specifically for the URO Premium Aluminum Oil Pan Improved profile and upgraded AEM material to eliminate leaks. Only works on URO Premium Oil Pan Limited Lifetime / Unlimited Mileage Warranty Guaranteed fitment Replaces hardened or cracking engine oil pan gaskets that allow vacuum leakage and degrade engine performance OE-style seal profile and durometer ensures proper compression seal between the engine block and oil pan High-quality seal material resists engine heat and oil degradation 24-Month Unlimited Mileage Warranty

Show More Show Less

Forge B58 Charge Pipe Set - All B58

T#:586966

Part#: FMBP3

Ships in 3 Business Days

$ 626.99 USD

Add to Wish List

Qty

$ 626.99 USD

Add to Wish List

BMWs, OEM charge pipe can become brittle and will generally fail under increased boost pressure. To combat this, Forge has developed a replacement with an increased diameter which helps to reduce turbulence and maximize airflow into the engine.

Show More Show Less

Snow Performance Boost Tap - N20, N55

T#:589559

Part#: SNO-40200

Ships in 3 Business Days

$ 74.99 USD

Add to Wish List

Qty

$ 74.99 USD

Add to Wish List

Installs easily for an accurate boost reading every time.

OEM Elring Valve Stem Seal Kit - Intake - N20/26 B48/46 2.0L ...

2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:2691342

Part#: 11340038719

In Stock at Vendor

$ 34.99

This product was last offered at the strikethrough price on
05-07-2026

$ 33.99 USD

Add to Wish List

Qty

$ 33.99 USD

Add to Wish List

Includes enough valve seals to do all the intake valves

FrankenTurbo F650 Twin-scroll Hybrid Turbocharger - BMW F3X 335i/xi, ...

For vehicles with Pneumatic Wastegate (PWG)

T#:51391273

Part#: F650PWG-F3X

Ships in 2 Business Days

$ 1,799.00 USD

Add to Wish List

Qty

$ 1,799.00 USD

Add to Wish List

The F650 "Super-Hybrid" provides F3X owners with a bolt-on path to 600+ horsepower while maintaining the twin-scroll responsiveness the N55 is known for.

Conti Tech Rubber High-Pressure Hose

We Price Match - Give Us A Call or Chat!

T#:378830

Part#: N0202811

Ships in 3 Business Days

$ 24.93

This product was last offered at the strikethrough price on
05-11-2026

$ 22.80 USD

Add to Wish List

Qty

$ 22.80 USD

Add to Wish List

7mm O.D X 2.5mm I.D.

Spline Lock Crank Hub Solution

T#:8061334

Part#: VTT-N55-CRANKHUB

Ships in 10 Business Days

$ 818.99 USD

Add to Wish List

Qty

$ 818.99 USD

Add to Wish List

Under certain conditions, the N55 crank hub likes to spin, without warning and even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and ECS are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and ECS are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution. The product comes with a 1-year unlimited mileage warranty from manufacturer defects.

Show More Show Less

5150 AutoSport Pro-Series Turbo Build Kit - BMW N55 Stage 2

T#:31755188

Part#: 5150-TBK-N55-100

Ships in 3 Business Days

$ 6,099.99 USD

Add to Wish List

Qty

$ 6,099.99 USD

Add to Wish List

The 5150 AutoSport Pro-Series Turbo Build Kit is made for high horsepower and turbocharged performace.

Valve Cover Gasket - Outer

2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:5175709

Part#: 11128621951

In Stock at Vendor

$ 41.99

This product was last offered at the strikethrough price on
05-07-2026

$ 39.99 USD

Add to Wish List

Qty

$ 39.99 USD

Add to Wish List

If your leaking oil from the valve cover there is a good chance your valve cover has failed. Get a quality Elring replacement gasket and stop those oil leaks.

aFe Pro GUARD D2 Oil Filter 4 Pack - N54/55 BMW Engine

T#:557623

Part#: 44-LF029-MB

Ships in 3 Business Days

$ 54.00 USD

Add to Wish List

Qty

$ 54.00 USD

Add to Wish List

Made from a synthetic media that allows maximum filtration with minimal flow restriction to satisfy modern oil-hungry engines such as the N54 and N55.

Pro-GUARD D2 Oil Filters are the next generation in oil filter technology. Pro-GUARD D2 Oil Filters deliver increased flow and efficiency that are demanded from performance gas applications. This cartridge style filter comes with a built-in seal for a hassle free installation.

Show More Show Less

Fuel-It! F-Chassis B58 Stage 3 LPFP Upgrade

T#:17837993

Part#: B58STG3LPFP

Back Ordered

$ 829.99 USD

Add to Wish List

Qty

$ 829.99 USD

Add to Wish List

This is a complete Low Pressure Fuel Pump (LPFP) upgrade for those customers that need the additional capacity to meet their power goals on pump gas, race gas, or E85. It utilizes a stock pump for the primary pump so that your EKP operates as intended by the factory eliminating potential errors for current draw and the secondary pump then runs under high boost only. For power levels up to 700whp we'd recommend using the standard 450 pump and beyond 700whp we'd recommend upgrading to the 525 pump. F-Series B58 (Gen 1) Stage 3 assemblies include: New stock LPFP Secondary pump assembly Secondary wiring harness Walbro filter Walbro 450 pump (F90000274) Compatible with the following vehicle production dates: 1' F20 LCI (05/2014 — 06/2019) 1' F21 LCI (05/2014 — 06/2019) 2' F22 (06/2014 — 06/2017) 2' F22 LCI (09/2016 — 12/2019) 2' F23 (06/2014 — 06/2017) 2' F23 LCI (09/2016 — 12/2019) 3' F30 LCI (09/2014 — 10/2018) 3' F31 LCI (09/2014 — 06/2019) 3' F34 GT LCI (09/2015 — 12/2019) 4' F32 (04/2015 — 02/2017) 4' F32 LCI (05/2016 — 12/2019) 4' F33 (03/2015 — 02/2017) 4' F33 LCI (05/2016 — 12/2019) 4' F36 Gran Coupé (05/2014 — 03/2017) 4' F36 Gran Coupé LCI (05/2016 — 12/2019) *Note: Secondary pump can NOT run full time. We recommend using a Hobb's switch to trigger the secondary under high boost. See the installation process here: https://www.youtube.com/watch?v=YoPf0F7PBt8

Show More Show Less

Rein Automotive Turbocharger Coolant Pipes CHT0903

2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:34147743

Part#: 11537643094

Ships in 1 Business Day

$ 61.99 USD

Add to Wish List

Qty

$ 61.99 USD

Add to Wish List

Turbocharger Coolant Pipes CHT0903 are high-performance components designed to efficiently manage coolant flow in turbocharged engines. Available from Turner Motorsport, these coolant pipes are specifically engineered for BMW vehicles, ensuring optimal cooling of the turbocharger system. By maintaining the right temperature, these pipes help extend the lifespan of your turbocharger while improving engine performance and efficiency.

These Turbocharger Coolant Pipes offer a perfect OEM fit for easy installation, making them ideal for both professionals and BMW enthusiasts. Crafted from durable, heat-resistant materials, they ensure long-lasting reliability and resistance to wear and tear, providing a robust solution for maintaining the performance of your vehicle’s turbocharged engine.

Key Features:

Specifically designed for turbocharged BMW engines
Perfect OEM fit for seamless installation
Efficiently manages coolant flow to the turbocharger
Enhances turbocharger performance and engine efficiency
Made from durable, heat-resistant materials
Available from Turner Motorsport, a trusted provider of high-quality BMW parts

For anyone looking to maintain or upgrade their BMW’s turbocharged engine, these Turbocharger Coolant Pipes are a crucial component that ensures optimal cooling and long-term reliability.

Show More Show Less

Rein Oil Pan Kit

2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:17738376

Part#: 11137618512

Ships in 3 Business Days

$ 181.99 USD

Add to Wish List

Qty

$ 181.99 USD

Add to Wish List

This OE quality kit includes the engine oil pan and gasket.

Multi-Pump Fuel Surge Tank (MPFST)

T#:31059457

Part#: 20-1440

In Stock

$ 549.99 USD

Add to Wish List

Qty

$ 549.99 USD

Add to Wish List

Victor Reinz Valve Seal Repair Kit - Exhaust

T#:377137

Part#: 11340035853

Ships in 3 Business Days

$ 58.99 USD

Add to Wish List

Qty

$ 58.99 USD

Add to Wish List

Stop burning oil at start-up

Walker Oxygen Sensor - Downstream - F22 M235, F3X 335/435, F06/F12 64...

T#:31324163

Part#: 11787645875

In Stock at Vendor

$ 101.99

This product was last offered at the strikethrough price on
04-14-2026

$ 91.99 USD

Add to Wish List

Qty

$ 91.99 USD

Add to Wish List

The oxygen sensor is part of your BMW's emissions control system and feeds data to BMW engine management computer. The oxygen sensor is positioned in the exhaust pipe and can detect rich and lean mixtures. The goal of the oxygen sensor is to help the engine run as efficiently as possible and also to produce as few emissions as possible. When your BMW oxygen sensor fails, the computer can no longer sense the air/fuel ratio, so it ends up guessing -- resulting in poor performance, poor gas mileage, and increased pollution. Make sure your BMW engine performs as it should, and doesn't use more fuel than it needs to, by simply changing your oxygen sensor today.

Show More Show Less

Pure Turbos N20 Stage 2 Turbo Upgrade - BMW N20 2.0L w/ EWG

For vehicles with electronic waste gate (EWG)

T#:578233

Part#: PURE-N20-0002KT

Ships in 4 Business Days

$ 2,590.99

This product was last offered at the strikethrough price on
07-12-2026

$ 2,495.00 USD

Add to Wish List

Qty

$ 2,495.00 USD

Add to Wish List

As BMW enthusiasts, we admittedly did not know how to feel when BMW moved to forced induction. We loved the naturally aspirated power that the NA straight-six produced, but Pure Turbos have been able to prove time and time again what a forced induction BMW powerplant is capable of putting down. Here at Turner Motorsport, we trust Pure Turbos to meet all of your power desires - after all, there's a reason the majority of the fastest forced induction BMWs on the road are running Pure Turbos. With Pure Turbos' Stage 2 upgrade, the BMW N20 two-liter is capable of 400whp or more with just a few additional supporting modifications!

Show More Show Less

Pure Turbos N55 Turbo Installion Kit - N55 3.0L

T#:590383

Part#: PUREN55INSTKIT

Ships in 2 Business Days

$ 233.99 USD

Add to Wish List

Qty

$ 233.99 USD

Add to Wish List

Includes everything you need to install your upgraded turbo from Pure Turbos.

Valvetronic Spring R&R

T#:641924

Part#: B117110

Ships in 5 Business Days

$ 414.64 USD

Add to Wish List

Qty

$ 414.64 USD

Add to Wish List

To remove select main springs on the cam system

Timing Chain Tensioner

T#:45210294

Part#: 11318685091

In Stock at Vendor

$ 96.99 USD

Add to Wish List

Qty

$ 96.99 USD

Add to Wish List

Nostrum Stage 2 DI Injectors - S55/N55

T#:9609825

Part#: H703-1257

Special Order: No Guaranteed ETA

$ 1,799.00 USD

Add to Wish List

Qty

$ 1,799.00 USD

Add to Wish List

The Stage 2 Injectors from Nostrum performance are an absolute must-have for those building big power N55 or S55 vehicles. While there are other injection methods out there - this is the OE upgrade we've all been looking for. These upgraded injectors are a seamless integration and provide the ability to deliver 55% more fuel than stock injectors.

Show More Show Less

CTS Turbo Stage 2+ Hybrid Turbo - BMW B58 Gen1

T#:46031873

Part#: TR-1057

Ships in 7 Business Days

$ 2,099.99 USD

Add to Wish List

Qty

$ 2,099.99 USD

Add to Wish List

BMW B58 Gen1 hybrid turbo designed to deliver maximum performance while maintaining OEM fitment and reliability. Built for enthusiasts looking to extract more power from their B58, this hybrid turbo provides increased airflow and efficiency for higher horsepower and torque gains, supporting 700whp+ with the proper supporting modifications.

Show More Show Less

Bosch Remanufactured Starter Motor - BMW N55 S55 3.0L

For vehicles with an Automatic Transmission

2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:40004862

Part#: SR9521XKT

In Stock at Vendor

$ 465.99

This product was last offered at the strikethrough price on
05-07-2026

$ 454.99 USD

Add to Wish List

Qty

$ 454.99 USD

Add to Wish List

The advertised price includes a refundable $78 core charge If your car won't turn over, there is a good chance your starter is shot. Bosch's OEM starter is a high quality replacement that will give you peace of mind thanks to its long life-span. Bosch is one of the largest OEM producers of Genuine BMW and aftermarket parts in the world, providing parts for almost every major automotive manufacturer. Bosch has likely supplied many of the original electrical (and mechanical) parts for your BMW. Thanks to their quality, high durability, and reliability, you should expect a long service life from Bosch products. As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Show More Show Less

Ferrea High Performance Valve Kit - Standard Size

T#:28770000

Part#: FER-HPVK-N20-T

Ships in 3 Business Days

$ 619.99 USD

Add to Wish List

Qty

$ 619.99 USD

Add to Wish List

High Performance Valve Spring Kit - B58

T#:25938619

Part#: KEL-HPVSK-B58

Ships in 3 Business Days

$ 699.99 USD

Add to Wish List

Qty

$ 699.99 USD

Add to Wish List

Kelford's performance valve spring and titanium retainer kit is designed to work with the B58B30 straight-6 engine. Made using high-performance PACALOY™, this kit is sure to offer outstanding performance. This kit is specifically engineered to work well with their Stage 1, Stage 2, and Stage 3 camshafts to provide exceptional quality, reliability, and performance. 90lb seat pressure at 36.5 mm installed height; 193lb at 11.0 mm valve lift Spring coil bind height at 23.6 mm

Show More Show Less

VTT Turbocharger Inlet Flange - Garrett G40/42/45 V-Band - 86mm ID ...

T#:52270240

Part#: GARROUTT4G4045

Ships in 10 Business Days

$ 37.99 USD

Add to Wish List

Qty

$ 37.99 USD

Add to Wish List

Upgrade your turbocharger exhaust connection with the VTT-FAB 86mm V-Band Outlet Flange, designed for the Garrett G40-G45 frame sizes.

Complete Valve Cover Gasket Replacement Kit - B58 Gen1

T#:30164662

Part#: 11128633750KT2

In Stock at Vendor

Sale - Save 7% $ 128.99

This product was last offered at the strikethrough price on
05-09-2026

$ 119.72 USD

Add to Wish List

Qty

Sale - Save 7%

$ 128.99

This product was last offered at the strikethrough price on
05-09-2026

$ 119.72 USD

Add to Wish List

Maintaining proper oil levels in your engine is crucial for peak performance. Undetected leaks can cause your oil to drop to dangerously low levels between oil changes, leading to severe engine damage.

One common culprit for oil leaks is the valve cover. Over time, exposure to extreme temperature fluctuations can wear down the gaskets, causing them to fail. Prevent oil leaks and protect your engine by replacing these vital components.

Comprehensive Kit Includes:

Valve Cover Perimeter Gasket Valve Cover Inner Gasket Valvetronic Motor Gasket Replace your old gaskets with our high-quality kit to keep your engine running smoothly and efficiently.

Show More Show Less

Magnetic Pickup Tool

T#:640838

Part#: 1976

In Stock at Vendor

$ 102.99

This product was last offered at the strikethrough price on
05-07-2026

$ 99.99 USD

Add to Wish List

Qty

$ 99.99 USD

Add to Wish List

Facet MAP Sensor - BMW N20 N26 S55 S63

T#:39059259

Part#: 13627843531

In Stock at Vendor

$ 118.99

This product was last offered at the strikethrough price on
05-07-2026

$ 114.99 USD

Add to Wish List

Qty

$ 114.99 USD

Add to Wish List

This is a replacement Manifold Absolute Pressure sensor Located on the charge air cooler. The MAP controls the amount of fuel that goes through the injectors based on the pressure of air at the intake manifold. If your vehicle is giving you a MAP code, replace it immediately to ensure you get the best gas mileage and performance. It is common for this part to fail slowly and cause poor fuel mileage and hampered performance. When it fails, the vehicle will stutter and stall as it falls into a limp mode. One way to check if your MAP is bad is to unplug the connector before starting your car. If it idles well (compared to a previous poor idle), your MAP sensor likely needs to be replaced. If you let this maintenance part go, your fuel economy will suffer as too much fuel is going into the engine and not being burned. A great way to give your vehicle an efficiency boost.

Show More Show Less