BMW Intake Parts for BMW 3 Series F34 (2014+)

Turbosmart GenV Raceport BOV (Fits competitors 50mm / female style flange. No weld flange included)

The Race Port is renowned for its exceptional compactness and lightweight design tailored for turbocharged competition-level engines. With its innovative collar design and internal flow structures, this BOV stands out as 50% lighter and 25% smaller than competing models, yet it boasts an impressive flow rate of 330 CFM, making it the market's top-performing BOV in its category.

Fits Chargepipes With Tial/Turbosmart Flange

In BMW's with the B58 engine, the intake system is partially limited. The bottom portion is lightweight and great for feeding cold air to the intake, but the top portion is excessively restrictive. Working with some of the original equipment, this intake continues to utilize the bottom portion of OE ducting and heat shielding, but replaces the top with a new high flow inverted performance cone filter. Extensive testing showed up to a 10+ HP gain to the wheels and allows for quicker turbo spool speed. Plus, this design gives you a great sound improvement, letting you hear both the intake and the turbo spooling!

**B58 Engine - BMW 140 240 340 440 - (B58 Intake)**

When modifying the car and increasing boost, installing an upgraded intercooler is essential to keep the engine computer from restraining boost as temperatures climb. The stock air-air intercooler is quickly overcome with heat and can't keep the intake air cool enough. If it's too hot the engine computer will reduce power to safer levels. This Dinan intercooler is a dual-core air-air design with an astounding 240% more surface area than the factory intercooler. The temperature at boost is 60% cooler at 6,250 RPM with the Dinan Dual Core compared to stock. Even heat soak at low speeds is reduced, making this a worthwhile addition even for stock or mildly tuned engines. Professional installation is strongly recommended as bumper removal is required and several pieces in the front end need to be cut and trimmed. The factory charge piping in and out of the intercooler is re-used.

For over 35 years, Dinan has been America's premier tuning company, pioneering advancements in BMW modification while retaining a focus on balanced performance that preserves the original character and driving feel that a BMW offers. When you install a Dinan part on your car, know that it's not only carefully developed and tested, but that Dinan stands behind it with a four year, 50,000-mile warranty. Dinan believes so fully in their “total package” approach that once your car has been fitted with enough of their parts, they celebrate your conversion from stock to Dinan with an exclusive trunk badge, displayed proudly by BMW enthusiasts everywhere. The intercooler is worth 2 points towards your Dinan badge.

Click here for full installation instructions, including fitment details. We strongly recommend reviewing these instructions prior to purchasing so you will be familiar with the small differences among models and front bumper designs.

This item fits the following BMWs:
2014+ F22 F23 BMW 228i 228iX M235i M235iX
2012-2015 F30 BMW 320i 328i 328i X-Drive 335i 335i X-Drive - Sedan
2012-2015 F31 BMW 328i X-Drive - Touring Wagon
2012-2016 F32 BMW 428i 428i X-Drive 435i 435i X-Drive - Coupe
2012-2015 F34 BMW 328i 328i X-Drive 335i 335i X-Drive - Gran Turismo
2012-2016 F36 BMW 428i 428i X-Drive 435i 435i X-Drive - GranCoupe

Perfect Fit:
Includes stainless steel clamps for a leak-free seal and heavy-duty 5-Ply reinforced silicone coupling for strength.

Mandrel-bent Tubing:
Constructed of 2-1/2" to 2-3/4" mandrel-bent aluminum tubing and powder-coated textured-red for heat and corrosion resistance. The smooth transition mandrel bends decrease turbulence which increases horsepower and torque. The high-temp wrinkle-black powder-coating insulates the tube from engine heat and protects the tube from corrosion.

aFe Badging:
Unique aluminum laser-cut aFe Power logo plate is welded-on for an aggressive style.

Also Fits:
2014-2016 BMW 128i/ix (F20/21) L4-2.0L (t) N20
2014-2016 BMW 228i/ix/220i (F22/23) 14-16 L4-2.0L (t) N20
2013-2016 BMW 320i/ix (F30/31/34) L4-2.0L (turbo) N20
2012-2016 BMW 328ix (F30) L4-2.0L (turbo) N20
2013-2016 BMW 328i/ix (F31/34) L4-2.0L (turbo) N20
2014-2016 BMW 420i/ix (F32/33) L4-2.0L (turbo) N20
2014-2016 BMW 428i/ix (F32/33/36) L4-2.0L (turbo) N20

Note: This intercooler tube is not CARB exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicle.

It is recommended for any vehicle where the boost pressure has been increased by an ECU software upgrade and for unmodified vehicles operating in warmer climates, as a solution to the many failures that have occurred, where the original rubber diaphragm splits, which causes a loss of boost pressure. Unfortunately the failure doesn’t always result in a check engine light as the valve can still be blown open by the boost pressure, so you may not be aware that you are losing power due to this.

Our alternative is a fully engineered solution offering significantly improved reliability. Our valve is piston based with no diaphragm to fail, and of all aluminium construction. It replaces the original unit with a pressure/vacuum operated piston valve that still also retains the desirable OEM ECU control over valve actuation.

7" Tall "Oil Free" Air Filter:
This intake system utilizes an oil free, 7" tall conical 360 degree radial flow performance air filter with 3-layers of synthetic media providing maximum airflow and performance.

High Quality Tube:
This system uses a high quality, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit.

Lightweight Vacuum Form Plastic Cover w/ Auxiliary Air Inlet:
Creates a stealthy under-hood look while reducing air intake noise without sacrificing power. A urethane plug is also included if you wish to block off the auxiliary air inlet.

Hassle-Free Installation: 
All clamps, coupling and hardware are included for hassle-free installation. This is a direct bolt-on kit that requires no cutting or drilling on factory parts.

DETAILS:

• 400 CFM Rating
• +9 HP / +10 lbs. x ft. Torque max gains
• Outflows factory intake
• CAD-Designed Roto-Molded Intake Tube
• Vacuum Form Cover for Stealthy Under-Hood Look w/ Auxiliary air Inlet
• Pro DRY S oil-free 3-Layer Synthetic Media for Maximum Convenience With Excellent Filtration Efficiency
• No Cutting or Drilling on Factory Parts for Faster Installation

Note 1:
Does NOT fit Convertible models.

Note 2:
This product is not currently CARB exempt and is not available for sale in California or for use on any vehicle registered with the California Department of Motor Vehicle.

This Stage 2 cold air intake system produces 11 max horsepower, 15 lbs. x ft. torque and out-flowed the factory intake by 38%. This system includes a durable powder-coated heat shield and features a washable/reusable conical Pro 5R air filter for maximum flow. This air filter is constructed with 100% polyurethane, for long life and multiple cleaning cycles. A huge one-piece mandrel bent wrinkle-black powder-coated intake tube, maximizes air velocity providing maximum performance and throttle response. This is a direct bolt-on kit and requires no cutting or drilling.