BMW uses a lot of plastic in their engine components to save weight and money. Unfortunately, plastic is damaged easily and the factory oil filter cap needs a special tool to remove. This cap is designed to use the original o-ring seal so no special parts are required. You only have to remove the original 'filter cage' from the original cap and transfer it to the new aluminum cap. The satin black anodize blends in with the rest of your engine bay making this a smart and subtle upgrade.

Here is a link to the original Genuine BMW oil filter cap if you are looking for that instead.

Unsure of what size spacer will work best for you? This professional kit includes 1mm, 2.5mm, 5mm, 10mm, and 15mm spacers with wheel studs and nuts for you play with. These are not the same spacers that we sell and they cannot be used to drive on. But with the studs installed the car can be lowered to the ground and rolled to check for clearances. These test fit spacers are drilled to fit the standard BMW 5x120 bolt pattern as well as 4-lug 4x100 (and VW/Audi bolt patterns too). You can stack spacers to achieve the perfect clearance. When you're ready call us to order the spacers you need (Turner spacers come in 3mm, 5mm, 7.5mm, 10mm, 12.5mm, 15mm, 17.5mm, 20mm, 25mm, and 30mm spacer thicknesses).

These spacers are not for driving on. They lack the hubcentric lip that BMW wheels are designed to work with. Driving on studs alone will lead to a failure.

Two ways to buy -

• Own. Just as it says, you buy this kit to own. Perfect for shops or race teams that change wheels or brake components often. For shops you can measure wheel clearance and order the correct spacers the first time around (no wasting inventory or paying return shipping). Note: Kits purchased to Own are not returnable for refunds.
• Rent. Pay the full price but get $110 as a store credit when you return the kit. We keep a modest $19.95 fee for the service. Perfect for DIY and enthusiasts who only need the Test Kit once. Use your store credit to purchase your spacers (or anything else from our catalog).

Wheel Spacer FAQ:
How to measure for wheel spacers
Wheel spacer encyclopedia

These 2-piece floating rotors help dissipate heat better than a standard cast iron rotor and are also lighter for less unsprung weight. Managing heat in the brake system is vital to braking performance, especially on the track or when driven hard. It's why your brake rotors have internal vanes that vent heat as the rotor spins. These 2-piece ECS rotors feature an outer cast iron friction surface ring that is separate from the aluminum center hat. This allows better airflow through the vanes and for the friction ring can expand as it gets hot. The rotors are also cross-drilled for better ventilation and slotted to improve brake pad performance.

ECS 2-Piece Rotors feature:

• Aluminum hats for light weight
• Heat-treated cast iron friction rings
• 2-piece assembly improves brake cooling
• Anti-corrosion coating on non-friction surfaces and hard anodizing on rotor hat

These are the same size as the stock rotors so your stock caliper and mounting bracket will fit and there will be no clearance issues with your wheels or to other components. Stainless steel rotor retaining screws are included. You can use these with any brake pad.

Price is for the pair of 370mm brake rotors.

This item fits the following BMWs with 370mm M Sport/M Performance brakes:
2012+ F30 BMW 320i 320iX 328i 328iX 330i 330iX 335i 335iX 340i 340iX - Sedan
2012+ F31 BMW 328iX 330iX - Touring Wagon
2012+ F32 BMW 428i 428iX 430i 430iX 435i 435iX 440i 440iX - Coupe
2013+ F33 BMW 428i 428iX 430i 430iX 435i 435iX 440i 440iX - Convertible
2012+ F34 BMW 328i 328iX 330i 330iX 335i 335iX 340i 340iX - Gran Turismo
2012+ F36 BMW 428i 428iX 430i 430iX 435i 435iX 440i 440iX - GranCoupe

Elevate your BMW's performance and reduce rotational mass with ECS Titanium Wheel Bolts, ideal for weight-conscious enthusiasts or those seeking high-quality, rust-resistant wheel bolts.

Key Benefits:

• 50% lighter than steel bolts, reducing rotational mass for improved performance.
• CNC'd from annealed titanium alloy, ensuring high quality and durability.
• Tested to class 10.9 fastener proof load requirements without signs of fatigue.
• 14mm diameter, 1.25mm thread pitch, 27mm length, conical seat, and 17mm head.
• Thoroughly clean hub threads before installation to prevent fatigue or cracking.
• Note: Adjust bolt length when using wheel spacers for proper fitment.

Upgrade to ECS Titanium Wheel Bolts for your BMW, optimizing performance while maintaining high quality and durability.

Meet modern emission regulations while preserving engine performance with the ECS Baffled Oil Catch Can. Designed for BMW and MINI vehicles, this system efficiently captures blow-by gases, preventing excessive oil vapor ingestion into the intake tract. The innovative 4-chamber baffle system maximizes oil/air separation, reducing carbon build-up and pollutants. Featuring a 1/4" drain fitting for easy maintenance, this catch can minimizes oil deposits, ensuring cleaner emissions and enhanced engine performance.

Key Benefits:

• Efficient 4-chamber baffle system for maximum oil/air separation
• Recirculated design reduces oil ingestion, promoting cleaner emissions
• Durable 6061-T6 billet machined body with anodized black finish for longevity
• Integrated dipstick and sealed reservoir for easy oil inspection and maintenance
• Serviceable design with removable baffle plates for cleaning
• Easy installation with customizable mounting options and leak-free fittings
• Engineered and manufactured in the USA for superior performance and durability

Note: Not for sale or use in the state of California on any pollution-controlled vehicle as per the California Air Resources Board.

The ECS BMW Coilover line was designed with daily drivers in mind! The ECS engineer's focus was to improve the performance and look of the suspension, without forgoing ride comfort. Like many top-tier coilovers, these coilovers feel as smooth and comfortable as a stock setup, while also providing an aggressive look and vastly improved handling.

The ECS Performance Coilover System provides a sport-tuned, height, damping, and body adjustable suspension with substantial performance benefits using high-quality materials and coatings to replace your worn suspension, all while giving your vehicle that perfect ride height!

Spring Rates: 8kg/mm (front), 10kg/mm (rear)

PERFORMANCE FEATURES

32 levels of rebound damping adjustment Adjustable damping, monotube shocks/struts paired with optimized progressive rate coil springs give your vehicle road-sticking grip with reduced body roll for exceptional confidence in your vehicle's handling. With your vehicle's new, lower ride height the center of gravity is now moved lower, further improving handling performance Adjustable front bodies allow you to set the ride height while maintaining correct spring pre-load Adjustable front and rear bodies allow the shock to operate in the correct valving range, regardless of ride height PRODUCT DESIGN

Strut and shock bodies finished with a durable gloss black powder coat for good looks and great longevity Threaded portions are clear zinc-coated for optimum corrosion protection against rain and salt Coil springs are powder-coated Reflex Silver Metallic finish for durability Red anodized, billet aluminum lower spring seats with locking collars allow for quick, on-the-car, adjustability with the included spanner wrenches Integrated bump stops KIT CONTENTS

ECS Performance Adjustable Coilover System - F2X/F3X (3-Bolt) Front Suspension Installation Hardware Strut Mount Gasket - 31306869890 (2) Spindle Pinch Bolt - 31306798530 (2) Spindle Pinch Nut - 07119905032 (2) Tension Strut Bolt - 31106885777 (2) Control Arm Bolt - 31106797237 (2) Control Arm Nut - 33326760668 (2) Ball Joint Locking Nut - 33306787062 (4) Rear Suspension Installation Hardware Shock to Control Arm Bolt - 07119907372 (2) Shock to Control Arm Nut - 33326760668 (2) Shock Mount Bolt - 07119907137 (6) Shock Mount Gasket - 33506866038 (2) Control Arm to Wheel Carrier Bolt - 33326762875 (2) Control Arm to Wheel Carrier Nut - 33306760349 (2)

Precision manufactured for consistent stopping power during high-performance driving. Featuring a matte black zinc coating for corrosion protection.

ECS has done it again, this time with the most advanced brake rotor yet - the 5th generation of high-performance brake rotors specifically designed for German cars. With each new generation, iterative improvements have been made to enhance the overall braking performance, durability, and reliability of these rotors.

The V5 cross-drilled and slotted rotor design offers even greater heat dissipation and improved wet-weather performance as compared with a slotted rotor, making it an ideal choice for high-performance driving enthusiasts. The 5th generation slotted brake rotor also features a sleek black zinc coating for a clean, contemporary look as well as superior corrosion protection versus an uncoated or black oxide-coated rotor.

Crafted from high-quality materials, ECS brake rotors are engineered to withstand the rigors of high-performance driving. The precise machining and finishing ensure optimal rotor balance and minimize vibration, resulting in a smooth and consistent braking experience.

Whether you're a weekend warrior or a daily driver, ECS 5th-generation brake rotors are sure to provide you with the stopping power, durability, and reliability you need to confidently tackle any driving situation. Upgrade your braking performance today!

Ditch the boring and overstated factory chrome front grilles and get a darker and more aggressive look on your car. These replacement grilles are made from 100% ABS plastic. We inspect each grille for finish imperfections and quality issues so you're getting only the ones we approve. Our grilles are sold in pairs - one for the left and one for the right. Installation is easy as they snap out and then snap back in.

These black grilles fit the following BMWs:
2014+ F34 328i xDrive 335i xDrive 340i xDrive

Amplify your driving experience with heightened turbo/induction sound, along with increased air flow, throttle response, and overall performance.

Discover a whole new driving experience, complete with captivating induction sounds, heightened throttle response, and noises you have not yet heard from your turbo. Unleash the full potential of your turbo and engine by ditching the restrictive enclosed intake box. The factory intake is no match for your N55 paired with the Luft-Technik Intak Intake.

It is important to highlight the distinctive dual-cone filter design, featuring a standard conical shape with a smaller inverted cone in the center. This configuration produces an exhilarating sound when lifting off the throttle. The airflow pattern as air exits the filter creates a unique turbo flutter sound, adding to the excitement of the driving experience.

The stock intake box, often labeled as a muffler/silencer, is engineered to dampen induction noise for a more refined ride. However, as enthusiasts, we crave the exhilarating sound of our induction as we accelerate. Our ECS intake is tailored for enthusiasts who seek a heightened driving experience. Crafted with function in mind, it features a silicone coupler, rotomolded inlet tube, heat shield, and filter, seamlessly integrating with the OE fresh air scoop and utilizing stock mounting locations. Experience enhanced performance and a renewed passion for driving with the ECS Luft-Technik Intake for your N55.

Key benefits:

Increased induction noise
Enhanced throttle response
+7 WHP / +14 FT-LBS TQ(peak gains) and +12 WHP / +15 FT-LBS (max gains)
Free-flowing for decreased strain on the turbo
Unique sounds from the dual-cone filter
Factory MAF scaling
Mounts to factory locations
Online installation instructions
Design:

Durable, lightweight 5052 heat-shield, finished in wrinkle black powder coat
4 Ply silicone coupler
Billet aluminum MAF flange
Rotomolded intake tube with smooth internal tubing for uninterrupted flow
Installs in front of the factory cold air duct
Kit Contents:

Silicone turbo coupler
Rotomolded inlet tube
Powder coated heatshield
Dual cone filter
Seals, clamps and hardware for installation

The ECS tow hook is a perfect starting point for our ECS tow mounted accessories or as a clean looking tow hook. In-house engineering designated this tow hook as the core that started it all when deciding the "must have" features when utilizing the factory tow hook location. The 4140 normalized steel gives our tow hook the strength needed to safely tow your car around and a black melonite coating to keep it aesthetically appealing.

Tow hook

• 1144 heat treated steel threaded adapter & bolt
• 4140 normalized tow hook
• All black melonite coating for extreme durability and corrosion resistance
• 54mm extension
• Includes the allen keys needed to make proper adjustments
• In-house designed & ECS engineered
• Made in America