Turner Motorsport has everything you need to upgrade your BMW through our stages of performance or to keep your car in peak condition with our range of the latest in proven OEM cooling parts. Upgrade your cooling system and engine performance with the selections below to give your BMW a performance and reliability advantage.
Our BMW ignition coils are designed with performance and efficiency in mind. An engine needs 3 main components to run (Air, Fuel, Spark.) Turner ignition coils are modified to increase energy output; more energy output results in a faster, more efficient and consistent burn to make sure your fuel is being utilized to its maximum potential. Our signature Turner ignition coils feature a blue housing that give your engine the performance and aesthetic your looking for. Ignition coils should be changed every 40,000 - 60,000 miles and are an important maintenance item due to the essential role they play in your engines health, performance and efficiency. Choose Turner Ignition Coils to keep your engine running strong and healthy. Features and Benefits: Increased performance Direct fitment Signature Turner Blue finish
Show More Show Less
Introducing our Turner Motorsport Crank Seal Guard – the essential shield for your BMW's engine integrity. Safeguarding the heart of your vehicle, this meticulously designed guard offers robust protection for the crank seal concealed behind the harmonic balancer.
Considered an indispensable maintenance component for your BMW, the Crank Seal Guard acts as a crucial defense against a potential and preventable catastrophe involving your accessory belt. Facing the reality of potential oil or coolant leaks in your engine, this guard becomes a reliable barrier, preventing these fluids from reaching the accessory belt. The consequence of a compromised belt includes walking, slipping, fraying, and rubber particles finding their way behind the harmonic balancer and into the crank seal – a scenario that can lead to severe engine failure.
Let's be honest, engine leaks are a common occurrence, and whether your engine is currently leaking or not, the Crank Seal Guard is a proactive measure against future threats. The wear and tear on the accessory belt due to oil and coolant exposure can result in slipping, tearing, or, worst-case scenario, belt snapping – posing a significant risk to your engine's well-being.
Prepare your car for the long haul and protect the vital components, It's not a matter of "if" but "when" your belt will become a problem, and our Crank Seal Guard is your proactive solution. Rigorously tested on N52/N54/N55 and S55 for 100% confirmed fitment, it stands as a reliable guardian for your engine's health. Invest in the protection your BMW deserves with the Turner Motorsport Crank Seal Guard.
Key benefits:
Protect crank seal from rogue accessory belts and their shredded debris Optimized to fit N52, N54, N55, and S55 engines Rigid design that fits within the space constraints between the engine block and harmonic balancer Zinc-coated fasteners for corrosion and oxidation resistance Design:
Modeled and designed from FARO laser scanning and Solidworks CAD Manufactured from 6061 billet aluminum Turner blue anodizing Installation:
It is a good idea to note how your belt is routed before starting the installation.
2 securing bolts for crank seal guard - Torque value of 20Nm
You will find either 6 or 8 E10 bolts are holding the harmonic balancer depending on the engine.
E10 (P#11237564511) N52: 6 bolts - Torque value of 25nm N54: 6 bolts - Torque value of 35nm N55: 8 bolts - Torque value of 35nm
E10 (P#11237575488) S55: 8 Bolts - Torque value of 35nm
This is a must-have for ALL BMWs, and simply installs in place of your existing drain plug. With every oil change you perform on your BMW, you'll be able to inspect for metal shavings and debris. Many times, if something is going wrong on your BMW's engine, the magnetic drain plug can give you an early warning. Our championship race team uses this info all the time (Ever find a piece of a valve spring in your oil? We have!) Be sure to get one now, and make the swap next oil change!
Show More Show Less
Our BMW ignition coils are designed with performance and efficiency in mind. An engine needs 3 main components to run (Air, Fuel, Spark.) Turner ignition coils are modified to increase energy output; more energy output results in a faster, more efficient and consistent burn to make sure your fuel is being utilized to its maximum potential. Our signature Turner ignition coils feature a blue housing that give your engine the performance and aesthetic your looking for. Ignition coils should be changed every 40,000 - 60,000 miles and are an important maintenance item due to the essential role they play in your engines health, performance and efficiency. Choose Turner Ignition Coils to keep your engine running strong and healthy. Features and Benefits: Increased performance Direct fitment Signature Turner Blue finish
Show More Show Less
Whether your S55-equipped BMW serves as a daily driver or track car, keeping temperatures cool is critical. While most enthusiasts focus on upgrading the radiator and water-to-air intercooler systems, the engine oil cooler is an overlooked yet critical component.
New for the F8X-generation M2, M3, and M4 is a low-slung, horizontally mounted oil cooler designed to harness underbody aerodynamics. By placing the cooler in a low-pressure zone, this design enhances airflow efficiency and achieves sustainable oil temperatures for stock and street-driven cars. However, the compact core is quickly overwhelmed on modified or track-driven vehicles. Its exposed mounting position also leaves it highly susceptible to impact damage, so a minor scrape or piece of road debris can mean a costly full replacement. If you’re already replacing your oil cooler, it’s the perfect time to upgrade!
Our engineering team set out to solve the shortcomings of the factory design by developing a larger, higher-capacity core that delivers measurable gains in thermal stability. With a 7% increase in core thickness over OEM, this upgraded unit enhances airflow through the cooler and helps maintain lower, more consistent oil temperatures under sustained load. Thanks to its robust bar-and-plate core, precision-formed sheet metal end tanks, and durable 5052 aluminum construction, it’s built to withstand the harsh realities of real-world performance driving.
Replaces OEM part numbers 17212284540 and 17214802333.
Features:
High-efficiency bar-and-plate core for superior heat dissipation Fully TIG-welded 5052 aluminum end tanks Retains OEM rubber mounting for vibration-isolated, factory-style fitment Black painted finish with laser-etched Turner logo Designed as a direct-fit replacement and upgrade for S55-equipped F8X vehicles Design:
7% thicker core (30mm vs 28mm) for increased thermal capacity 6.5% increase in finned area (104,000 mm² vs 97,650 mm²) for better cooling Compatible with the Turner Motorsport skid plate kit (ES#3448772, ES#3247792) for complete protection Product Development:
Our High Performance Aluminum Heat Exchanger was designed, engineered, tested, and quality inspected by our Research and Development team in our Wadsworth, Ohio, facility. We strive for the highest level of precision and quality through leading-edge product development technology, including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer, and rigorous long-term product testing.
High-performance ignition kit for your S55 featuring spark plugs, Turner high-performance ignition coils, and dielectric grease to make sure you have no issues at your next maintenance interval! Our BMW ignition coils are designed with performance and efficiency in mind. An engine needs 3 main components to run (Air, Fuel, and Spark). Turner ignition coils are modified to increase energy output; more energy output results in a faster, more efficient, and consistent burn to make sure your fuel is being utilized to its maximum potential. Our signature Turner ignition coils feature a blue housing that gives your engine the performance and aesthetic you're looking for. Ignition coils should be changed every 40,000 - 60,000 miles and are an important maintenance item due to the essential role they play in your engine's health, performance, and efficiency. Choose Turner Ignition Coils to keep your engine running strong and healthy. Features and Benefits: Increased performance New spark plugs and grease Direct fitment Signature Turner Blue ignition coils
Show More Show Less
When we designed this catch we wanted to have the most function options available, the best separation method, and the easiest to service. The Turner engineered catch cans offer a pre-setup design based ion desired flow direction, however, this does not limit you to this flow. The inner baffle orientation can be easily adjusted to flow in both directions in case you decide to move this catch can to a different vehicle. A 4 chamber system baffle system inside the catch can was engineered to create multiple changes in the direction of airflow within the separator to cause oil droplets to fall out of suspension before exiting the catch can. Having a closed/recirculated design reduces oil ingestion and promotes cleaner emissions and odor-less operation.
Show More Show Less
Upgrade your engine build with Turner's WPC-treated Race Series Bearings, engineered for serious performance enthusiasts. Starting with ACL’s high-performance bearing shells, these Race Series bearings are built to withstand extreme RPMs and stress. Utilizing a "Duraglide" tri-metal construction and a high-strength overlay plate, these bearings offer superior oiling and heat resistance for high-RPM operation.
Our WPC-treated bearings take ACL’s already impressive design and enhance it even further. The WPC treatment process strengthens and smooths the bearing surface by firing high-speed, ultra-fine particles at the bearing shells, reducing friction and improving durability. This advanced surface treatment ensures smoother operation and improved heat dissipation, which are critical for any high-performance engine.
Key Features:
Duraglide Tri-Metal Construction: ACL's Race Series bearings feature a high-strength overlay for enhanced performance. Optimized Oiling: Designed to promote better oil flow during high-RPM conditions. Precise Fitment: Manufactured with OEM-level precision using micron tolerance machining. WPC-Treated for Strength: Surface treatment adds strength and reduces friction for improved engine performance. No Flash Plating: Allows for better heat transfer and bearing retention. Thermal Discharge Process: Smoother, stronger components through WPC’s unique thermal discharge technology. Enhanced Heat and Friction Resistance: Built to combat the biggest enemies of high-performance engines. Don’t settle for standard bearings—choose Turner Motorsport WPC-treated Race Series Bearings for the ultimate engine performance upgrade. Perfect for your next engine rebuild or rod bearing service!
When we designed this catch we wanted to have the most function options available, the best separation method, and the easiest to service. The Turner engineered catch cans offer a pre-setup design based ion desired flow direction, however this does not limit you to this flow.
Show More Show Less
Increase drivetrain rigidity and put that power to the ground! This industry-leading encapsulated design reduces NVH and prevents heat transfer.
From the factory, all BMW models are equipped with soft rubber or fluid-filled engine mounts. While these mounts perform well at isolating drivetrain vibrations, they are prone to degradation and allow for significant drivetrain movement. This often results in a loose-feeling driveline, missed shifts, and a generally disconnected driving feel.
To address these issues, We have developed a performance alternative. Constructed from 6061 Billet Aluminum, these mounts are built to last. While most performance drivetrain mounts feature solid or polyurethane-bonded aluminum construction, the engineers at Turner designed a unique four-piece design that disburses NVH (noise, vibration, and harshness). This multi-piece design offers the added benefit of serviceability. Additionally, encapsulating the polyurethane and adding a TecaPeek isolator prevents heat transfer to the insert, increasing the lifespan and durability of the mount.
Features & Benefits:
High-strength 6061 billet aluminum construction 80A Polyurethane provides a considerable increase over stock rubber durometer, eliminating excess deflection and ensuring drivetrain stiffness. Instead of the typical polyurethane-bonded aluminum construction, this mount is encapsulated to reduce NVH (noise, vibration, and harshness). Finished in black hard-coat anodized for a clean, durable, and corrosion-resistant finish. TecaPeek isolator reduces heat transfer from the engine to the mount insert, increasing the lifespan of the mount. A simple bolt-on design makes for an easy install Replace your worn-out factory engine mounts and experience increased drivetrain rigidity, reduced deflection, and more precise shifting. Our Turner Performance Polyurethane Engine Mount Set is designed for maximum durability and strength while maintaining the perfect balance between stiffness and comfort—the perfect choice for your high-horsepower BMW!
When we designed this catch we wanted to have the most function options available, the best separation method, and the easiest to service. The Turner engineered catch cans offer a pre-setup design based ion desired flow direction, however this does not limit you to this flow. The inner baffle orientation can be easily adjusted to flow in both directions in case you decide to move this catch can to a different vehicle. A 4 chamber system baffle system inside the catch can was engineered to create multiple changes in the direction of airflow within the separator to cause oil droplets to fall out of suspension before exiting the catch can. Having a closed / recirculated design reduces oil ingestion and promotes cleaner emissions and odor-less operation.
Our catch can was also designed with the idea that the cans fill level can easily be checked with a top mounted dipstick and an optional use bottom drain hole. The drain system comes complete with a valve and hose to be mounted at a lower area of the vehicle so when you're doing an oil change you can drain the catch can.
Features:
6061-T6 billet machined body, anodized black for lasting protection and appearance
Strategically positioned 4 chamber baffle system maximizes oil / air separation
Knurled and black anodized oil dipstick makes inspecting oil volume of reservoir clean and simple
Sealed with a pre-installed viton O-Ring
Includes 2.5mm allen key to remove baffle plates for cleaning
Engineered to create multiple changes in the direction of airflow within the separator to cause oil droplets to fall out of suspension before exiting the catch can
Closed / recirculated design reduces oil ingestion and promotes cleaner emissions and odor-less operation
When we designed this catch we wanted to have the most function options available, the best separation method, and the easiest to service. The Turner engineered catch cans offer a pre-setup design based ion desired flow direction, however, this does not limit you to this flow. The inner baffle orientation can be easily adjusted to flow in both directions in case you decide to move this catch can to a different vehicle. A 4 chamber system baffle system inside the catch can was engineered to create multiple changes in the direction of airflow within the separator to cause oil droplets to fall out of suspension before exiting the catch can. Having a closed/recirculated design reduces oil ingestion and promotes cleaner emissions and odor-less operation.
Show More Show Less
The Turner F8x M3/M4 S55 oil catch can was designed with a strategically positioned 4 chamber baffle system with an added easy drain feature. The intent behind this design was to offer the most effective oil/air separation while being incredibly easy to maintain. The included drain kit allows you to route the drain hose to a mounted location near the belly pan of the vehicle making it convenient to empty at oil change intervals.
Show More Show Less
When we designed this catch we wanted to have the most function options available, the best separation method, and the easiest to service. The Turner engineered catch cans offer a pre-setup design based ion desired flow direction, however this does not limit you to this flow.
Show More Show Less
When we designed this catch we wanted to have the most function options available, the best separation method, and the easiest to service. The Turner engineered catch cans offer a pre-setup design based ion desired flow direction, however this does not limit you to this flow. The inner baffle orientation can be easily adjusted to flow in both directions in case you decide to move this catch can to a different vehicle. A 4 chamber system baffle system inside the catch can was engineered to create multiple changes in the direction of airflow within the separator to cause oil droplets to fall out of suspension before exiting the catch can. Having a closed / recirculated design reduces oil ingestion and promotes cleaner emissions and odor-less operation.
Our catch can was also designed with the idea that the cans fill level can easily be checked with a top mounted dipstick and an optional use bottom drain hole. The drain hole can be used with a valve and hose to be mounted at a lower area of the vehicle so when you're doing an oil change you can drain the catch can.
Features:
6061-T6 billet machined body, anodized black for lasting protection and appearance
Strategically positioned 4 chamber baffle system maximizes oil / air separation
Knurled and black anodized oil dipstick makes inspecting oil volume of reservoir clean and simple
Sealed with a pre-installed viton O-Ring
Includes 2.5mm allen key to remove baffle plates for cleaning
Engineered to create multiple changes in the direction of airflow within the separator to cause oil droplets to fall out of suspension before exiting the catch can
Closed / recirculated design reduces oil ingestion and promotes cleaner emissions and odor-less operation
Optional use drain hole (valve and hose sold separately, watch for our model specific drain kits!)
Upgrade your engine build with Turner's WPC-treated Race Series Bearings, engineered for serious performance enthusiasts. Starting with ACL’s high-performance bearing shells, these Race Series bearings are built to withstand extreme RPMs and stress. Utilizing a "Duraglide" tri-metal construction and a high-strength overlay plate, these bearings offer superior oiling and heat resistance for high-RPM operation.
Our WPC-treated bearings take ACL’s already impressive design and enhance it even further. The WPC treatment process strengthens and smooths the bearing surface by firing high-speed, ultra-fine particles at the bearing shells, reducing friction and improving durability. This advanced surface treatment ensures smoother operation and improved heat dissipation, which are critical for any high-performance engine.
Key Features:
Duraglide Tri-Metal Construction: ACL's Race Series bearings feature a high-strength overlay for enhanced performance. Optimized Oiling: Designed to promote better oil flow during high-RPM conditions. Precise Fitment: Manufactured with OEM-level precision using micron tolerance machining. WPC-Treated for Strength: Surface treatment adds strength and reduces friction for improved engine performance. No Flash Plating: Allows for better heat transfer and bearing retention. Thermal Discharge Process: Smoother, stronger components through WPC’s unique thermal discharge technology. Enhanced Heat and Friction Resistance: Built to combat the biggest enemies of high-performance engines. Don’t settle for standard bearings—choose Turner Motorsport WPC-treated Race Series Bearings for the ultimate engine performance upgrade. Perfect for your next engine rebuild or main bearing service!
Turn your oil drain plug into an effective metal particle filter! This drain plug fits virtually all BMWs, and has a SUPER strong magnet built into it's tip, trapping iron and steel contaminants and safely removing them from the circulation.
Show More Show Less
Upgrade your BMW's engine performance with the Dinan Performance Ignition Coil Service Kit. These high-quality ignition coils are crafted to enhance ignition power, ensuring optimal engine performance and efficiency. Engineered for durability and reliability, these coils provide improved throttle response, smoother idle, and enhanced fuel efficiency. Benefit from the Dinan Performance Ignition Coil Service Kit, designed to unleash the true potential of your BMW's engine.
Show More Show Less
The S55 suffers from a weak point in its crankshaft. It has been reported that when increasing the power to the engine, the crank hub can move or spin slightly under an extreme load.
Maintaining proper oil levels in your engine is crucial for peak performance. Undetected leaks can cause your oil to drop to dangerously low levels between oil changes, leading to severe engine damage.
One common culprit for oil leaks is the valve cover. Over time, exposure to extreme temperature fluctuations can wear down the gaskets, causing them to fail. Prevent oil leaks and protect your engine by replacing these vital components.
Comprehensive Kit Includes:
Valve Cover Assembly Valve Cover Gaskets Gasket Flange CCV Hose Hardware Replace your old gaskets with our high-quality kit to keep your engine running smoothly and efficiently.
VTT is happy to introduce the first and only available plug and play crankcase breather kits for ALL BMW applications that use the two-prong oil tab style oil fill caps. With this breather simply remove your oil cap, install the breather, and instantly free up horsepower, improve turbo draining, remove crankcase pressure, all while adding a cool look to your engine bay.
Can be used by itself with the stock PCV system to eliminate crankcase pressure, or with any number of PCV setups for the ultimate in crankcase pressure relieve
Made from 6061-T6 Aircraft aluminum anodized black for a long-lasting finish, 4 stainless steel baffles for complete oil control, a PTFE one way check ball, a high-quality filter, and clamp all work together to keep crankcase pressure where it belongs, out of your crankcase.
This breather will fit: ALL BMW's with the two-prong style oil fill cap including but not limited to N54, N55, S55, S54
NOTE: NOT ALL THE MODELS LISTED HAVE THE SAME HOOD CLEARANCE, WE CANNOT SAY WHICH MODELS WILL HAVE CLEARANCE ISSUES, AND WHICH WILL NOT AS WE HAVE NOT TEST IT ON ALL MODELS. IF YOU ARE ORDERING THE BREATHER FOR ANYTHING OTHER THAN AN N54 TEST CLOSE YOUR HOOD CAREFULLY TO ENSURE CLEARANCE IF IT DOES NOT FIT LET US KNOW, AND WE WILL GET YOU A REFUND ONCE THE BREATHER IS RETURNED.
MODEL LIST OF REPORTED CLEARANCE ISSUES: N55 E/F 3 SERIES
Upgrade your stock oil cooler thermostat for improved performance. Swap your factory 110-degree Celsius thermostat for a new 70-degree Celsius version for faster oil flow and extended temperature control. With oil temperatures reaching 230 degrees Fahrenheit by the time your factory thermostat opens, initiating oil flow at lower temperatures proves more effective than attempting to cool down already elevated temperatures.
Utilizing a factory-style thermostat, this upgrade can be used in all weather conditions and allows your engine to warm up properly, unlike thermostat bypass kits.
Kit contents:
Lower temperature thermostat - 70c (158F) vs Factory 110c (230F) Low temp thermostat spring
Elevate your custom installation with the ECS -10AN O-Ring Boss fitting, a crucial component that connects your ECS Tuning Catch Can to a 3/4" ID hose. This fitting simplifies your plumbing setup, ensuring a seamless solution.
Featuring a pre-installed Viton O-ring, this fitting is engineered for excellence, providing a leak-proof seal that resists the effects of oil and fuel exposure, guaranteeing long-term durability.
The 3/4" nipple is thoughtfully designed with barbs to secure hose position effectively, minimizing the risk of hose disconnection. Keep in mind that clamps and hoses are available for separate purchase. These fittings are sold individually, with most installations requiring a pair of them.
BMW uses a lot of plastic in their engine components to save weight and money. Unfortunately, plastic is damaged easily and the factory oil filter cap needs a special tool to remove.
Under certain conditions, the N55 crank hub likes to spin, without warning and even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and ECS are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution.
Show More Show Less
Replaces BMW # 11287848606 ECS Tuning Performance Kevlar reinforced belts give you that extra piece of mind! Kevlar reinforced belts experience less elongation over time minimizing the amount of belt adjustment needed as well as offering a higher shock and impact resistance compared to OEM style belts. ECS Tuning Performance Kevlar reinforced belts have been put through a series of multiple tests such. Tensile strength Elongation Hardness Temperature and oil resistance per standard JASO E 109-94 Flex testing per SAE J2432.
Show More Show Less
Engineered to deliver accurate pressure for identifying emissions system leakage, the URO Fuel Vapor Detection Pump is a direct-fit OE replacement for BMW F2X, F3X, and F8X models. Its precise design ensures easy installation, while alloy conductors minimize electrical resistance, enabling efficient and reliable pump operation. This high-quality component helps maintain optimal emissions system performance, ensuring your vehicle meets environmental standards and operates at peak efficiency. A trusted solution for BMW owners, this pump is built for durability and performance.
Key Benefits:
Provides accurate pressure to detect emissions system leakage.
Direct-fit OE replacement design for easy and hassle-free installation.
Alloy conductors minimize electrical resistance for efficient operation.
Ensures optimal emissions system performance and compliance.
Compatible with BMW F2X, F3X, and F8X models.
Engineered for durability and long-lasting reliability.
It is a well-known issue on the BMW N54/55 platforms that your serpentine belt can fail for various reasons. When this happens, there is a high chance of the belt getting sucked behind the front damper pulley and then being pushed past the crank seal into your oil pan. From there it can get sucked into the oil pick up causing total engine failure. Even if you do not lose the engine, it is a COSTLY repair to remove the sub-frame and drop the oil pan to remove the belt. The best way to combat this is to watch for oil leaks and keep up on your maintenance. BUT, even with those preventative measures, pre-mature belt failure can occur. This crank seal guard installs over your front crank seal and will keep the belt from being sucked in if a belt failure does occur. This is a cheap way to ensure you do not end up having to replace your motor from oil starvation due to an ingested belt. Vargas' seal is different from those already on market in two major ways. Firstly, it is not offensively priced. Secondly, it is 100% billet with no welds on the tabs to break, no cheap bent thin steel pieces. 100% Billet 6061-T6 aluminum, anodized black for long-term corrosion resistance. Crank Seal Guard includes: One VTT Billet N54/55 Crank Seal Guard Two extended 12.9 Grade bolts, and two stainless washers We highly recommend you install WITH a crank bolt capture at the same time, as you have to remove the damper anyway. Then you will get the benefit of helping eliminate the dreaded spun crank hub and the crank seal issue
Show More Show Less
Ensure proper sealing when installing the turbos on your S55. This kit includes all standard replacement and necessary installation components, including: 2x Exhaust manifold gaskets 20x Exhaust manifold nuts 2x Oil Drain Gaskets 2x Oil drain O-rings 4x Oil Feed O-rings 6x Coolant connection O-rings 2x Turbo to downpipe gaskets 2x Downpipe to Exhaust gaskets
Show More Show Less
Every 60-80,000 miles, we recommend replacing your spark plugs to ensure your ignition system is running optimally. Over time carbon can build up around the head of the spark plug and decrease spark strength and effectiveness, leading to weaker fuel mixture detonation, misfires, and potential check engine lights. To prevent this, have put together our High-Performance Ignition Service Kits. These kits include new Bav Auto High-Performance Ignition Coils, new spark plugs, dielectric grease, and a BMW spark plug service label to keep track of when your spark plugs were replaced. Bav Auto's Ignition coils feature core windings that have been modified to increase firepower and promote a faster, more efficient burn. This gives your BMW/MINI increased torque in the lower range of RPM and more horsepower in the upper range. Exact improvements depend on the current condition of your engine, but you'll definitely feel the difference. They'll also improve your fuel economy. From 1974 to 2019, Bavarian Autosport was one of the premier vendors for BMW and MINI auto parts. We are happy to preserve the Bav Auto legacy by continuing to carry their high-quality products into the future. All Bav Auto parts will remain unchanged in design and sourced from the same OEM suppliers to ensure long-lasting reliability. We trust these parts, accessories, and upgrades so confidently that we back every Bavarian Autosport branded component with a 2-year warranty. As a leading source of high-performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!
Show More Show Less
Replaces BMW # 11287848605 ECS Tuning Performance Kevlar-reinforced belts give you that extra peace of mind! Kevlar reinforced belts experience less elongation over time minimizing the amount of belt adjustment needed as well as offering a higher shock and impact resistance compared to OEM style belts. ECS Tuning Performance Kevlar-reinforced belts have been put through a series of multiple tests: Tensile strength Elongation Hardness Temperature and oil resistance per standard JASO E 109-94 Flex testing per SAE J2432.
Show More Show Less
If you don't wish to fabricate intricate brackets to mount your ECS Baffled Oil Catch Can we have the solution. ECS's three-piece bracket kit includes two options for securing the catch can. Choose from either a flat parallel mounting plate or a bent 90° mounting plate to give you 360° rotation for an infinitely adjustable mounting location.
Show More Show Less
Upgrade your stock oil cooler thermostat for improved performance. Swap out your existing cover with ease, replacing it with a durable billet cover. Upgrade from your 110-degree Celsius thermostat to a new 70-degree Celsius version for faster oil flow and extended temperature control. With oil temperatures reaching 230 degrees Fahrenheit by the time your factory thermostat opens, initiating oil flow at lower temperatures proves more effective than attempting to cool down already elevated temperatures.
Utilizing a factory-style thermostat, this upgrade can be used in all weather conditions and allows your engine to warm up properly unlike thermostat bypass kits.
Kit contents:
Billet thermostat housing cover Replacement gasket Hardware Lower temperature thermostat - 70c (158F) vs Factory 110c (230F) Low temp thermostat spring
ECS Tuning now offers their magnetic drain plugs for your F8X BMW. Featuring a permanently mounted magnet, these plugs traps tiny metallic particles that are unable to be caught by your oil filter. Over time, these plugs save your bearings and oil pump from unneeded wear. Manufactured of 7075-T6 aluminum, the ECS Tuning magnetic drain plug is 80% stronger than the weaker (and much more common) 6061 aluminum. ECS magnetic drain plugs also capture many metal particles from wearing or recently rebuilt engines. The constant flaking effect of normal wear of reciprocating parts. Material missed after boring or machining. Small component breakdown caused by high RPM break-in. For vehicles with a production date up to 09/2014
Show More Show Less
Is your N54/N55 oil temp running too high? The most likely cause is a faulty OE oil thermostat. With this ECS Low Temp Oil Thermostat Kit, you can keep your engine happy with oil temps holding between 194F (90c) to 230F (110c). This is the perfect solution for both higher milage models and models that have been tuned or further upgraded with performance turbochargers, Kit includes: Oil Thermostat Bung Oil Thermostat Spring Oil Thermostat Shaft Assembly
Show More Show Less
Under certain conditions, the N55 crank hub likes to spin, without warning and even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and ECS are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution.
Show More Show Less
Replacement oil filter kit with a new drain plug for 2015+ F80 M3/F82 M4. This filter is for the S55 engine, used in the M3/M4 and includes the new drain bolt recommended by BMW during an oil change.
The URO Valvetronic Actuator is a high-quality replacement part for BMW engines, designed to restore precise control over valve timing and lift, enhancing engine performance, fuel efficiency, and responsiveness. Built to meet strict OEM standards, this actuator helps optimize the power and efficiency of BMW engines, making it an ideal solution for maintenance or repair. Available from Turner Motorsport, the URO Valvetronic Actuator ensures a reliable fit and excellent performance for BMW owners.
Restores optimal control over valve timing for enhanced engine efficiency
Improves throttle response and provides smoother acceleration
Contributes to lower emissions and better fuel economy
High-quality construction built for long-lasting durability
Direct-fit replacement compatible with select BMW models
Available from Turner Motorsport, a trusted source for BMW parts
The URO Valvetronic Actuator is a cost-effective replacement that delivers the reliable, high-performance operation BMW owners expect.
Often an oversight in maintenance, ignition components are also susceptible to wear and tear. Spark Plugs can accumulate carbon, reducing the spark intensity and it's ability to properly ignite the air/fuel mixture, leading to misfires and generally declining performance.
Show More Show Less
Enthusiast Bundle: Turner Motorsport Crank Seal Guard with ECS Kevlar-Reinforced Belt
Protect your N5X/S55 from catastrophic failure with this must-have upgrade!
The Turner Motorsport Crank Seal Guard is meticulously designed to safeguard your engine’s crank seal from potential damage caused by a shredded serpentine belt. Oil or coolant leaks can lead to accessory belt slippage, fraying, and tearing, which can send belt debris behind the harmonic balancer and into the crank seal, risking serious engine damage.
Key Benefits:
Shields crank seal from accessory belt debris, preventing engine failure Custom-fit for N54/N55/S55 engines Zinc-coated fasteners for superior corrosion resistance Durable 6061 billet aluminum construction, with Turner blue anodized finish for added strength and style Cutting-Edge Design:
Designed using FARO laser scanning and Solidworks CAD for precision fitment Rigorous testing ensures reliable protection in all conditions Easily installs with 2 securing bolts torqued to 20Nm ECS Performance Kevlar-Reinforced Accessory Belt:
Reduced elongation for consistent performance over time Enhanced shock and impact resistance Superior oil and temperature resistance tested to JASO E 109-94 and SAE J2432 standards Ensure long-term engine health and peace of mind with the Turner Motorsport Crank Seal Guard and ECS Kevlar-Reinforced Accessory Belt combo. Prevent the "when, not if" risk of belt-related engine failure today!
The MAP sensor, or manifold absolute pressure sensor, works with the engine computer to set the fuel curve and give readings to the engine computer. If yours is faulty, it may cause improper running, rich or lean fuel curves, or other general performance issues. Replace yours with this unit to keep your engine running at full potential. For N54 applications, you will need adapter harness T#583821- This TMAP sensor is typically used in high-boost applications for the N54
Show More Show Less
A cracked valve cover is often the culprit behind engine oil leaks, as prolonged exposure to extreme temperature fluctuations deteriorates the gaskets, leading to failure. Ensure your engine oil stays where it belongs by replacing your valve cover.
This comprehensive valve cover kit includes all necessary gaskets and hardware for a seamless, hassle-free installation.
Key Benefits:
Perfect Fit: Designed to match OE specifications for a straightforward installation and optimal valvetrain protection. Prevent Leaks: Cracked valve covers can cause problematic vacuum leaks and allow oil to damage engine components. Premium Quality: Made from high-grade metal or plastic materials, this valve cover is corrosion-resistant and can withstand intense engine heat and oil vapor. URO Parts Excellence: With a catalog of over 8,000 premium spare parts, URO Parts specializes in high-precision, durable replacements for factory BMW components. Each part is meticulously evaluated to ensure the perfect balance of durability, functionality, and cost. For top-quality replacement parts that won't break the bank, trust URO Parts.
Ensures a perfect fit for your vehicle Instantly restores proper sealing and fuel delivery by replacing the failed fuel pump o-ring Features a direct-fit OE-style design for easy installation and extended durability Crafted from high-quality elastomer material capable of withstanding exposure to corrosive hydrocarbon fuel and intense vehicle heat
