Cylinder Head

Genuine BMW Intake Bearing Ledge - N54 3.0L

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:31411

Part#: 11127550913

In Stock

5% off MSRP $ 706.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 674.99 USD

Add to Wish List

Qty

5% off MSRP

$ 706.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 674.99 USD

Add to Wish List

When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.
Genuine BMW Bearing Ledge Intake
This item fits the following BMW Chassis:
E82 1M Coupe,E71 X6,E82,E89 Z4,E90,E92,E93,F01,F02

Fits BMW Engines including:
N54,N54T

Show More Show Less

BMW N54 ARP Head Stud Kit

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:17538610

Part#: ARP-HSK-N54-14

In Stock

$ 599.99 USD

Add to Wish List

Qty

$ 599.99 USD

Add to Wish List

The VAC Motorsports ARP Head Stud Kit was put together by VAC and ARP’s finest engineers. This is a completely custom kit designed specifically for the almighty N54. *High Boost (25+ psi application) option features: (14) 11mm ARP Head Studs (14) ARP Washers for 11mm Studs (14) ARP Nuts for 11mm Studs Install Tips: MUST drill and tap the (4) 9mm holes in the engine block to make them 11mm holes. This way all the engine block holes are 11mm, and fit ALL (14) 11mm Studs. Torque Specs: All studs torque down through 3-equal steps to 95 ft lbs ***This is NOT the Chrysler and Volvo stud kits! VAC Motorsports and ARP engineers designed and assembled this kit with high grade material, specifically so standard street-use or high-boost N54 owners have a PROPER kit that does not fail over time, such as the retro-fit Chrysler and Volvo head stud kits. ARP is the world leader in fastener technology. Makers of the finest fasteners in the market, especially for BMW engines, ARP is the brand you can count on when you want the highest reliability possible. If you are looking for high performance from your BMW engine, then ARP Head Stud Kits are a must. All kits come complete with hardened parallel-ground washers and aerospace-quality nuts.

Show More Show Less

HEAD STUD KIT - BMW S85

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:20089537

Part#: ARP-HSK-S85

Ships in 5 Business Days

$ 579.99 USD

Add to Wish List

Qty

$ 579.99 USD

Add to Wish List

ARP Performance Head Stud Kit - N54

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:1061441

Part#: ARP-HSK-N54

Ships in 9 Business Days

$ 554.99 USD

Add to Wish List

Qty

$ 554.99 USD

Add to Wish List

Despite the fact that BMW engineers some of the worlds most revered engines, during number crunching something always has to be a compromise. One item that is always found to be a weak point- the OEM hardware. It is definitely sub-par for real performance use under high stress such as modded engines and track use. We use these fasteners on all of VAC's in-house head builds. Whenever the head is coming off, your switching to forced induction, or if you are simply prepping to drive your car hard; we highly recommend switching to far superior race-grade hardware. These Head Stud Kits greatly improve reliability; helping to eliminate movement of the of the cylinder head and intern, gasket failure caused by inferior OEM head-bolt stretch. This is the #1 cause of premature head gasket failure, especially on boosted or high output engines. Though more expensive than OEM, converting to one of VAC's head studs kits will not only give added strength and reliability when its needed most, but provides the most accurate torque readings because studs don’t “twist” into the block; all clamping forces are on one axis, and there is less force exerted on the normally stressed threads of the block. This increases block and hardware life and typically makes the head easier to properly install to the block, a blessing if your head may have to be removed more than once. Especially in the time crunch of racing, when engines are dissembled frequently, studs make removing and installing the cylinder head on to the block a much easier task. By allowing the studs to act as a guide on to the head, your head slides on and off and also ensures proper alignment of the head and gasket for the same reason. It is similar to converting your wheel-bolts to wheel-studs.

Show More Show Less

ARP Head Stud Kit B48 Undercut CA625+, 12pt

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:48367044

Part#: 401-4704

In Stock

$ 588.99

This product was last offered at the strikethrough price on
06-08-2026

$ 529.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 588.99

This product was last offered at the strikethrough price on
06-08-2026

$ 529.99 USD

Limited Qty Sale

Add to Wish List

ARP2000 12PT HSK - S63

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:54104152

Part#: 201-4702

Ships on Jul 28, 2026

20% off MSRP $ 639.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 511.99 USD

Add to Wish List

Qty

20% off MSRP

$ 639.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 511.99 USD

Add to Wish List

Developed specifically for high-boost, high-horsepower motorsport applications, the ARP Head Stud Kit provides the ultimate clamping force required to maintain a perfect head-to-block seal under the most grueling race conditions.

Show More Show Less

ARP Head Stud Kit - N54

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:24112781

Part#: ARP-HSK-N54-S

Back Ordered

$ 499.99 USD

Add to Wish List

Qty

$ 499.99 USD

Add to Wish List

Wagner Tuning M54 Upgrade Head Stud Set - Burnished

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:38330030

Part#: P102031410

Ships in 1 Business Day

$ 499.00 USD

Add to Wish List

Qty

$ 499.00 USD

Add to Wish List

A necessary upgrade for the M54 engine if you plan on adding more power!

Supertech Valve Spring Kit - BMW S65 Engine

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:4908057

Part#: ST-VSK-S65

Ships in 7 Business Days

$ 469.99 USD

Add to Wish List

Qty

$ 469.99 USD

Add to Wish List

Revitalize your BMW S65 engine's performance with Supertech Beehive Valve Springs – a reliable solution to the common issue of valve spring breakage. Designed as an economical yet high-quality alternative, these valve springs are the perfect complement to Stage 1 and Stage 2 cylinder heads.

Enhanced Durability: Crafted from premium Superclean Chrome Silicon Vanadium Steel alloy.
High-Performance Design: Withstands high rpms for improved engine performance.
Better Memory: Ensures consistent performance under extreme conditions.
Precision Engineering: Computer-designed to manage wire stress levels and harmonics.
Complementary Upgrade: Ideal for use with Stage 1 and Stage 2 cylinder heads.

Upgrade your BMW S65 engine with Supertech Beehive Valve Springs for reliable and durable performance.

Show More Show Less

Wagner Tuning - Head Stud Set Brushed For BMW N55 Engine

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:42571264

Part#: P102061410.BR

Ships in 9 Business Days

$ 449.00 USD

Add to Wish List

Qty

$ 449.00 USD

Add to Wish List

Ensure your BMW N55 engine stays sealed and performs at its peak with the Wagner Tuning - Head Stud Set Brushed For BMW N55 Engine—your essential upgrade for power and reliability.

Genuine BMW Camshaft Bearing Bridge - Intake

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:21667

Part#: 11121740428

Ships in 2 Business Days

6% off MSRP $ 456.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 430.99 USD

Add to Wish List

Qty

6% off MSRP

$ 456.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 430.99 USD

Add to Wish List

Genuine BMW Bearing Ledge Intake
This item fits the following BMW Chassis:
E36 M3,E34,E36,E39,E46,E53 X5 X5,E83 X3,E85 Z4

Fits BMW Engines including:
M50,M52,M54,M56,S50,S52

Show More Show Less

S54 Valve Adjustment Kit - E46 M3, Z3M, Z4M

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:401675

Part#: S54VADJKT1

In Stock

Sale - Save 3% $ 405.61

This product was last offered at the strikethrough price on
05-03-2026

$ 393.63 USD

Add to Wish List

Qty

Sale - Save 3%

$ 405.61

This product was last offered at the strikethrough price on
05-03-2026

$ 393.63 USD

Add to Wish List

BMW recommends valve adjustment every 30,000 miles on the S54 engine.This valve adjustment kit includes every thing needed to to a proper valve adjustment on the S54 engine.

Kit includes

Wiseco valve shims
Elring valve cover gasket set
BMW Valve shim Installation tool
Valve shim feeler gauge set
Castrol TWS Edge Professional Engine Oil - 6 Quarts
Mann Oil Filter Kit
Oil pan drain plug

Please note the the included feeler gauge set allows you to stack feeler blades to get a more precise adjustment

*Click here for valve adjustment instructions*

This item fits the following BMWs:
2001-2006 E46 BMW M3, M3 Convertible
2001-2002 Z3 BMW M Roadster M Coupe
2006-2008 Z4 BMW Z4 M Roadster M Coupe

Show More Show Less

ARP Cylinder Head Stud Kit - ARP2000 - BMW S58 3.0L

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:51110148

Part#: 201-4705

In Stock at Vendor

20% off MSRP $ 467.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 373.99 USD

Add to Wish List

Qty

20% off MSRP

$ 467.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 373.99 USD

Add to Wish List

For engine builders crafting a high-performance powerhouse, the ARP Cylinder Head Stud Kit is the industry-standard choice for reliability and strength. Each kit features studs, nuts, and washers manufactured from ARP’s proprietary ARP2000 alloy, a material rated far superior to standard aircraft-quality steels.

Show More Show Less

Genuine MINI Piston W/ Rings - ( 0 Size ) Priced Each

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:33527

Part#: 11257566019

Special Order: No Guaranteed ETA

10% off MSRP $ 414.20

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 370.99 USD

Add to Wish List

Qty

10% off MSRP

$ 414.20

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 370.99 USD

Add to Wish List

Genuine MINI MAHLE PISTON
Fits BMW Engines including:
N14

ARP Cylinder Head Stud Kit - ARP2000 - BMW B58 3.0L

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:1105898

Part#: 201-4701

In Stock at Vendor

20% off MSRP $ 459.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 367.99 USD

Add to Wish List

Qty

20% off MSRP

$ 459.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 367.99 USD

Add to Wish List

For engine builders crafting a high-performance powerhouse, the ARP Cylinder Head Stud Kit is the industry-standard choice for reliability and strength. Each kit features studs, nuts, and washers manufactured from ARP’s proprietary ARP2000 alloy, a material rated far superior to standard aircraft-quality steels.

Show More Show Less

ARP Cylinder Head Stud Kit - E9X M3 S65

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:554124

Part#: 201-4307

Ships in 8 Business Days

$ 363.99 USD

Add to Wish List

Qty

$ 363.99 USD

Add to Wish List

ARP uses a premium grade 8740 alloy that is rated far superior to "aircraft" quality. Each stud is heat-treated, ensuring complete heat penetration, to increase the clamping load up to 200,000 psi. ARP studs are threaded after heat-treat, which gives them 1000% (that's ten times!) better fatigue strength than studs threaded prior to heat-treat. Threading the studs after heat-treating is more difficult and costly (as it's harder on tooling) but the results are well worth the effort. These simply are the best head studs we've found and we highly recommend them in both racing and forced induction applications. Due to the additional clamping force between the head and block, these are IDEAL for turbocharged engines.

Show More Show Less

Athena Cut Ring Head Gasket - 84.5mm - BMW M50 M52 (84mm Bore) ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:26171655

Part#: ATH-HG-CR-M50-84

In Stock

$ 324.99 USD

Add to Wish List

Qty

$ 324.99 USD

Add to Wish List

Upgrade your BMW engine's performance with the Athena Cut Ring Head Gasket. This gasket replaces BMW part # 11121726619 and 11121726617 and is specifically designed for M50 & M52 iron block inline 6-cylinder engines found in E34/E36 chassis. Standard OEM & MLS gaskets can only handle a certain amount of cylinder pressure before they start to leak, making the Athena Cut Ring Head Gasket the recommended choice for applications making 16+ psi. A compression leak passing the head gasket can cause a range of issues, including engine overheating, loss of power, misfires, and in severe cases, catastrophic engine failure. Athena's gasket is crafted with premium quality reinforced M0115, an asbestos-free material that's original equipment approved and renowned for its superior quality. The AISI 304 stainless steel Cooper Rings bite into the aluminum head, providing maximum sealing capabilities around the cylinder bore and optimizing engine performance, even on engines with nitrous and/or turbo applications that exceed 2-bar boost. Before installation, it is crucial to have the mating surfaces of the cylinder head and block professionally cleaned and resurfaced to ensure they are completely flat. Please be aware that the gasket should have a size that is 0.5mm to 1mm larger than the piston. For example, if the piston measures 84mm, then the gasket should be the next size up, either 84.5mm or 85mm. Installation instructions: Make sure that the engine block and cylinder head surfaces are clean, flat, and free from any debris, oil, or coolant. Install the Cut Ring gasket on the engine block and ensure that it is properly aligned. Avoid twisting or bending the gasket during installation. Place the cylinder head on top of the gasket and install the head bolts or studs in their correct positions. Follow the manufacturer's recommended torque specifications and tighten the bolts or studs in the proper sequence to ensure even clamping force across the gasket. After the initial tightening, re-torque the head bolts or studs after the engine has been started and then allowed to cool to room temperature. This will ensure that the gasket is properly seated and compressed. It is recommended to not use any additional sealant on the MLS gasket, as it is already coated with a Viton rubber sealant. Using additional sealant can hinder the performance of the gasket.

Show More Show Less

ARP Rod Bolt Set - M20 - 53mm

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:1061435

Part#: ARP-RBS-M20

Ships on Jul 28, 2026

$ 314.99 USD

Add to Wish List

Qty

$ 314.99 USD

Add to Wish List

ARP, the world’s leader in fastener technology. There is no substitute for the best! Planning to boost your M20? Building a high HP stroker engine? This rod bolt kit is for you! This kit provides higher strength, more clamping power, and the option to re-use the hardware unlike your OEM bolts. We run these in many of our own builds as well and are 110% satisfied with the fit and finish of these ARP bolts. We offer a 53mm UHL version for those running OEM M20 rods or a 44mm UHL version for those who have upgraded to S50/S52 OEM rods.

Show More Show Less

Athena Cut Ring Head Gasket S14

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:28537477

Part#: ATH-HG-CR-S14-95

Ships in 3 Business Days

$ 284.99 USD

Add to Wish List

Qty

$ 284.99 USD

Add to Wish List

This Athena Cut Ring Head Gasket is specifically engineered to replace BMW part 11121316714 for the S14B20, S14B23, S14B25, S14B27 engines found in the E30 M3. Factory OEM & MLS head gaskets are only engineered to handle a limited amount of cylinder pressures before they start to leak, causing a range of issues, including engine overheating, loss of power, misfires, and in severe cases, catastrophic engine failure. Athena-SCE Cut Ring Head Gaskets are uniquely designed to handle increased cylinder pressure caused by power modifications, making them the recommended choice for applications making 16+ psi. Design: Athena-SCE's gasket body is composed of Motorgasket, a reinforced material developed by Athena's R&D department. This consists of a steel core covered with two layers of asbestos-free aramid fibre and offers excellent thermal and mechanical resistance without compromising its ability to adapt to mating surfaces. To ensure maximum sealing under all conditions, a silicone bead is also applied to critical sealing areas, such as oil and coolant passages. The AISI 304 stainless steel cooper rings bite into the aluminum head, providing maximum sealing around the cylinder bore and optimizing engine performance, even on engines with nitrous and/or turbo applications that exceed 2 bar boost.

Show More Show Less

BMW M20 Engine ARP Head Stud Kit - E30 325i, E34 525i

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:189783

Part#: 201-4305

In Stock

$ 271.99

This product was last offered at the strikethrough price on
07-10-2026

$ 271.18 USD

Add to Wish List

Qty

$ 271.18 USD

Add to Wish List

Virtually every top professional BMW engine builder relies on ARP Pro Series head studs. ARP uses a premium grade 8740 alloy that is rated far superior to "aircraft" quality. Each stud is heat-treated to 200,000 psi, ensuring complete heat penetration. ARP studs are threaded after heat-treat, which gives them 1000% (that's ten times!) better fatigue strength than studs threaded prior to heat-treat. Threading the studs after heat-treating is more difficult and costly (as it's harder on tooling) but the results are well worth the effort. These simply are the best head studs we've found and we highly recommend them in both racing and forced induction applications. Due to the additional clamping force between the head and block, these are IDEAL for turbocharged engines.

Converting from the factory BMW head bolts to head studs makes it much easier to assemble an engine, especially a racing powerplant which must be serviced frequently (and quickly!), and also ensures proper alignment of the head and gasket. Head studs also provide more accurate and consistent torque loading. Here's why: When you use bolts to secure the head, the fastener is actually being "twisted" while it's being torqued to the proper reading. Accordingly, the bolt is reacting to two different forces simultaneously. A head stud should be installed in a "relaxed" mode -- never crank it in tightly using a jammed nut. If everything is right, the stud should be installed finger tight. Then, when applying torque to the nut, the stud will stretch only on the vertical axis. An information sheet is provided with each set.

ARP is a company that prides itself on performance and durability, no matter the application. Offering the finest engine hardware money can buy is the driving initiative at ARP and this is evidenced by the staggering amount of satisfied customers and race teams the world over.

This item fits the following BMWs:
1985-1991 E30 BMW 325e 325es 325i 325ic 325is 325ix
1989-1990 E34 BMW 525i

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:593035

Part#: 456.560

Ships on Jul 29, 2026

$ 245.99 USD

Add to Wish List

Qty

$ 245.99 USD

Add to Wish List

Ensure optimal engine performance for your Mini with this comprehensive Cylinder Head Gasket Set. Perfect for repairing all gaskets and seals during cylinder head replacement or repair, this set includes intake and exhaust gaskets, valve stem seals, valve cover gasket, exhaust gasket, and throttle body gasket. Benefits include:

Comprehensive set for repairing gaskets and seals.
Ensures proper sealing and prevents leaks.
Compatible with Mini models.
Facilitates cylinder head replacement or repair.

Show More Show Less

S54 Valve Adjustment Kit - With gaskets

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:582218

Part#: 83300493743

In Stock

Sale - Save 1% $ 246.16

This product was last offered at the strikethrough price on
05-03-2026

$ 242.77 USD

Add to Wish List

Qty

Sale - Save 1%

$ 246.16

This product was last offered at the strikethrough price on
05-03-2026

$ 242.77 USD

Add to Wish List

BMW recommends valve adjustments every 30k miles on your S54-equipped BMW. We have all the parts you will need to do the job in one discounted package for your BMW E46 M3, Z3, or Z4! Kit includes: 11127832034 x 1 - Valve Cover Gasket 11127831271 x 6 - Spark Plug Hole Gasket 11121437395 x 2 - Valve Cover Seal Washer Grommet 11127830972 x 13 - Valve Cover Nut Grommet VSK4 Wiseco x 1 - Valve Shim Set 83300493743 x 1 - Valve Shim Tool *Click here for valve adjustment instructions* This item fits the following BMWs: 2001-2006 E46 BMW M3, M3 Convertible2001-2002 Z3 BMW M Roadster M Coupe2006-2008 Z4 BMW Z4 M Roadster M Coupe

Show More Show Less

ARP Steel Block Head Stud Kit for M50/M52 & S50/S52 (US Spec) ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:3606

Part#: 201-4302

In Stock

19% off MSRP $ 295.92

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 240.99 USD

Add to Wish List

Qty

19% off MSRP

$ 295.92

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 240.99 USD

Add to Wish List

Virtually every top professional BMW engine builder relies on ARP Pro Series head studs. ARP uses a premium grade 8740 alloy that is rated far superior to "aircraft" quality. Each stud is heat-treated to 200,000 psi, ensuring complete heat penetration. ARP studs are threaded after heat-treat, which gives them 1000% (that's ten times!) better fatigue strength than studs threaded prior to heat-treat. Threading the studs after heat-treating is more difficult and costly (as it's harder on tooling) but the results are well worth the effort. These simply are the best head studs we've found for the E36 6 cylinder engines, and we highly recommend them in both the racing and forced induction arena. (Due to the additional clamping force between the head and block, these are IDEAL for turbo charging and supercharging!)

Converting from the factory BMW head bolts to head studs makes it much easier to assemble an engine, especially a racing powerplant which must be serviced frequently (and quickly!), and also ensures proper alignment of the head and gasket. Head studs also provide more accurate and consistent torque loading. Here's why: When you use bolts to secure the head, the fastener is actually being "twisted" while it's being torqued to the proper reading. Accordingly, the bolt is reacting to two different forces simultaneously. A head stud should be installed in a "relaxed" mode -- never crank it in tightly using a jammed nut. If everything is right, the stud should be installed finger tight. Then, when applying torque to the nut, the stud will stretch only on the vertical axis. An information sheet is provided with each set. Kit includes everything pictured -- 14 head bolts, washers, bolts and assembly lubricant.

ARP is a company that prides itself on performance and durability, no matter the application. Offering the finest engine hardware money can buy is the driving initiative at ARP and this is evidenced by the staggering amount of satisfied customers and race teams the world over.

These head studs fit the following BMWs/engines (steel block only)
1992-1995 M50 6 cylinder including 325i, 325is and 525i
1996-1999 M52 6 cylinder including 328i, 328is, 323is, 528i
1995-1995 S50US 3.0 liter including 1995 M3 (US only)
1996-1999 S52US 3.2 liter including 1996-1999 M3 (US) and MZ3

Show More Show Less

MINI 1.6 N12/N14/N16/N18 Engine ARP Head Stud Kit

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:189781

Part#: 201-4304

In Stock

$ 227.99 USD

Add to Wish List

Qty

$ 227.99 USD

Add to Wish List

Virtually every top professional BMW engine builder relies on ARP Pro Series head studs. ARP uses a premium grade 8740 alloy that is rated far superior to "aircraft" quality. Each stud is heat-treated to 200,000 psi, ensuring complete heat penetration. ARP studs are threaded after heat-treat, which gives them 1000% (that's ten times!) better fatigue strength than studs threaded prior to heat-treat. Threading the studs after heat-treating is more difficult and costly (as it's harder on tooling) but the results are well worth the effort. These simply are the best head studs we've found and we highly recommend them in both racing and forced induction applications. Due to the additional clamping force between the head and block, these are IDEAL for turbocharged engines.

Converting from the factory BMW/MINI head bolts to head studs makes it much easier to assemble an engine, especially a racing powerplant which must be serviced frequently (and quickly!), and also ensures proper alignment of the head and gasket. Head studs also provide more accurate and consistent torque loading. Here's why: When you use bolts to secure the head, the fastener is actually being "twisted" while it's being torqued to the proper reading. Accordingly, the bolt is reacting to two different forces simultaneously. A head stud should be installed in a "relaxed" mode -- never crank it in tightly using a jammed nut. If everything is right, the stud should be installed finger tight. Then, when applying torque to the nut, the stud will stretch only on the vertical axis. An information sheet is provided with each set.

ARP is a company that prides itself on performance and durability, no matter the application. Offering the finest engine hardware money can buy is the driving initiative at ARP and this is evidenced by the staggering amount of satisfied customers and race teams the world over.

Show More Show Less

S54 Valve Adjustment Kit w/ Wiseco Shims - E46 M3, Z3M, Z4M

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:582210

Part#: S54WVALVESHIMKT

Ships in 6 Business Days

Sale - Save 2% $ 222.04

This product was last offered at the strikethrough price on
05-03-2026

$ 216.70 USD

Add to Wish List

Qty

Sale - Save 2%

$ 222.04

This product was last offered at the strikethrough price on
05-03-2026

$ 216.70 USD

Add to Wish List

Elring Cylinder Head Installation Kit - S52 3.2L

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:367024

Part#: 11129069861

In Stock

$ 379.99

This product was last offered at the strikethrough price on
04-06-2026

$ 214.99 USD

Add to Wish List

Qty

$ 214.99 USD

Add to Wish List

If there is a large amount of oil on the sides of the engine or if you can smell burning oil, chances are it's a bad valve cover gasket. The gasket fails and allows oil to seep down onto the side of the engine and other parts causing a mess and reducing the amount of oil in your engine. This replacement gasket from Elring is perfect to prevent any further oil leaks.

Includes everything needed to re-seal your engine's head.

Elring is one of the biggest OEM names in the manufacturing of high quality gaskets that are available for very affordable prices. Elring has supplied many automotive names for years with the gaskets that seal your car's components from day 1 so you can rest assured that these components will last for a long time to come!

Fits the following engines:
S52 3.2L

Show More Show Less

Genuine BMW Cylinder Head Gasket - N54 3.0L

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:22177

Part#: 11127557265

Ships in 2 Business Days

13% off MSRP $ 233.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 202.99 USD

Add to Wish List

Qty

13% off MSRP

$ 233.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 202.99 USD

Add to Wish List

Genuine BMW Cylinder Head Gasket Asbestos-Free - 1,215Mm
This item fits the following BMW Chassis:
E82 1M Coupe,E71 X6,E82,E89 Z4,E90,E92,E93,F01,F02

Fits BMW Engines including:
N54,N54T

Show More Show Less

CENTRAL VALVE VANOS

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:528041

Part#: 11368617694

Ships in 2 Business Days

6% off MSRP $ 212.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 199.99 USD

Add to Wish List

Qty

6% off MSRP

$ 212.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 199.99 USD

Add to Wish List

Head Stud Kit - R56

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:42099869

Part#: 56HSK

Ships in 2 Business Days

$ 199.99 USD

Add to Wish List

Qty

$ 199.99 USD

Add to Wish List

BMW M10 Engine ARP Head Stud Kit - 2002, E21 320i, E30 318i

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:189784

Part#: 201-4601

Ships in 8 Business Days

$ 196.99 USD

Add to Wish List

Qty

$ 196.99 USD

Add to Wish List

Virtually every top professional BMW engine builder relies on ARP Pro Series head studs. ARP uses a premium grade 8740 alloy that is rated far superior to "aircraft" quality. Each stud is heat-treated to 200,000 psi, ensuring complete heat penetration. ARP studs are threaded after heat-treat, which gives them 1000% (that's ten times!) better fatigue strength than studs threaded prior to heat-treat. Threading the studs after heat-treating is more difficult and costly (as it's harder on tooling) but the results are well worth the effort. These simply are the best head studs we've found and we highly recommend them in both racing and forced induction applications. Due to the additional clamping force between the head and block, these are IDEAL for turbocharged engines.

Converting from the factory BMW head bolts to head studs makes it much easier to assemble an engine, especially a racing powerplant which must be serviced frequently (and quickly!), and also ensures proper alignment of the head and gasket. Head studs also provide more accurate and consistent torque loading. Here's why: When you use bolts to secure the head, the fastener is actually being "twisted" while it's being torqued to the proper reading. Accordingly, the bolt is reacting to two different forces simultaneously. A head stud should be installed in a "relaxed" mode -- never crank it in tightly using a jammed nut. If everything is right, the stud should be installed finger tight. Then, when applying torque to the nut, the stud will stretch only on the vertical axis. An information sheet is provided with each set.

This item fits the following BMWs:
1970-1976 2002 BMW 1600 2002 2002tii
1977-1983 E21 BMW 320i
1984-1985 E30 BMW 318i

Show More Show Less

VANOS CENTRAL VALVE B46 B48 B58

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:542583

Part#: 11368696446

Ships in 2 Business Days

13% off MSRP $ 223.19

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 193.83 USD

Add to Wish List

Qty

13% off MSRP

$ 223.19

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 193.83 USD

Add to Wish List

Turner Motorsport Genuine BMW Vanos Central Valve (Long)

Introducing the Genuine BMW Vanos Central Valve (Long) by Turner Motorsport, the perfect replacement for the VANOS central valve located within the VANOS sprockets. This authentic BMW part guarantees precise fitment and dependable performance.

Benefits:

Genuine BMW quality assurance
Direct replacement for VANOS central valve
Ensures optimal VANOS system functionality

Upgrade your BMW's VANOS system with the Turner Motorsport Genuine BMW Vanos Central Valve (Long) for lasting performance.

Show More Show Less

ARP Head Stud Kit, BMW S14

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:28537451

Part#: ARP-HSK-S14

Ships in 3 Business Days

$ 179.99 USD

Add to Wish List

Qty

$ 179.99 USD

Add to Wish List

This ARP head stud Kit is designed for the BMW S14 B20, S14B23, S14B25, S14B27 engines found in the E30 M3. Installing ARP head studs can provide several benefits, including increased clamping force, improved head gasket sealing, and greater overall engine strength. This is especially important in high-performance and racing applications where the engine is subjected to increased stress and higher temperatures. Before installing ARP head studs, it is important to properly clean and prepare the engine block and cylinder head mating surfaces. It is also recommended to use ARP Ultra-Torque Fastener Assembly Lubricant during installation to ensure proper torque and clamping force. Instructions: 1. To ensure proper thread engagement and accurate torque readings, clean ALL threads in the block. Chase if necessary with ARP Thread Chaser. 2. Clean and inspect all hardware prior to installation. Look for obvious defects or shipping damages, plus proper fit, length and dimension. 3. If the cylinder head studs protrude into a water jacket, lubricate the block threads of the studs with ARP THREAD SEALER. 4. Screw studs into the block “HAND TIGHT ONLY”. 5. Install the cylinder head(s) and check for binding or misalignment. 6. Lubricate the stud threads, nuts and washers with ARP ULTRA-TORQUE FASTENER ASSEMBLY LUBRICANT. Then install the washers and the nuts onto the studs and tighten them hand tight. ARP recommends using the ARP ULTRA-TORQUE FASTENER ASSEMBLY LUBRICANT that is provided with each kit as opposed to motor oil. This is due to higher friction on the studs as well as inconsistencies in the clamping force of the fasteners when motor oil or other low quality lubricants are used.

Show More Show Less

Genuine BMW Rocker Arm Shaft - Exhaust - S54 3.2L

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:34261

Part#: 11337838124

Ships in 2 Business Days

$ 168.32 USD

Add to Wish List

Qty

$ 168.32 USD

Add to Wish List

Genuine BMW Rocker Arm Shaft, Outlet
This item fits the following BMW Chassis:
E46 M3,E85 Z4M,E46,E85 Z4,E86 Z4

Fits BMW Engines including:
S54

Show More Show Less

Head Gasket - Cylinder 5-8 - E39 E38 E53 with M62 engine

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:12880

Part#: 11121433477

Ships in 2 Business Days

5% off MSRP $ 175.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 167.99 USD

Add to Wish List

Qty

5% off MSRP

$ 175.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 167.99 USD

Add to Wish List

Genuine BMW Cylinder Head Gasket Asbestos-Free - Cylinders 5-8 -- 1,74mm for M62 V8 engine.
When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.

This item fits the following BMWs:
1998-2003 E39 BMW 540i
1998-2001 E38 BMW 740i 740il
1998-1999 E31 BMW 840i 840ci
2000-2003 E53 BMW X5 4.4i

Show More Show Less

Head Gasket - Cylinder 1-4 - E39 E38 E53 with M62 engine

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:6591

Part#: 11121433473

Ships in 5 Business Days

5% off MSRP $ 175.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 167.99 USD

Add to Wish List

Qty

5% off MSRP

$ 175.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 167.99 USD

Add to Wish List

Genuine BMW Cylinder Head Gasket Asbestos-Free - Cylinders 1-4 -- 1,74mm for M62 V8 engine.
When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.

This item fits the following BMWs:
1998-2003 E39 BMW 540i
1998-2001 E38 BMW 740i 740il
1998-1999 E31 BMW 840i 840ci
2000-2003 E53 BMW X5 4.4i

Show More Show Less

BMW S14 Engine ARP Head Stud Kit - E30 M3

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:189786

Part#: 201-4605

In Stock at Vendor

$ 160.99 USD

Add to Wish List

Qty

$ 160.99 USD

Add to Wish List

Virtually every top professional BMW engine builder relies on ARP Pro Series head studs. ARP uses a premium grade 8740 alloy that is rated far superior to "aircraft" quality. Each stud is heat-treated to 200,000 psi, ensuring complete heat penetration. ARP studs are threaded after heat-treat, which gives them 1000% (that's ten times!) better fatigue strength than studs threaded prior to heat-treat. Threading the studs after heat-treating is more difficult and costly (as it's harder on tooling) but the results are well worth the effort. These simply are the best head studs we've found and we highly recommend them in both racing and forced induction applications. Due to the additional clamping force between the head and block, these are IDEAL for turbocharged engines.

Converting from the factory BMW head bolts to head studs makes it much easier to assemble an engine, especially a racing powerplant which must be serviced frequently (and quickly!), and also ensures proper alignment of the head and gasket. Head studs also provide more accurate and consistent torque loading. Here's why: When you use bolts to secure the head, the fastener is actually being "twisted" while it's being torqued to the proper reading. Accordingly, the bolt is reacting to two different forces simultaneously. A head stud should be installed in a "relaxed" mode -- never crank it in tightly using a jammed nut. If everything is right, the stud should be installed finger tight. Then, when applying torque to the nut, the stud will stretch only on the vertical axis. An information sheet is provided with each set.

ARP is a company that prides itself on performance and durability, no matter the application. Offering the finest engine hardware money can buy is the driving initiative at ARP and this is evidenced by the staggering amount of satisfied customers and race teams the world over.

This item fits the following BMWs:
1987-1991 E30 BMW M3

Show More Show Less

R56 Main Stud Kit

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:30397432

Part#: R56MSK

Ships in 2 Business Days

$ 159.99 USD

Add to Wish List

Qty

$ 159.99 USD

Add to Wish List

MINI 1.6 W10/W11 Engine ARP Head Stud Kit

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:212677

Part#: 201-4301

In Stock

$ 156.99 USD

Add to Wish List

Qty

$ 156.99 USD

Add to Wish List

Virtually every top professional BMW engine builder relies on ARP Pro Series head studs. ARP uses a premium grade 8740 alloy that is rated far superior to "aircraft" quality. Each stud is heat-treated to 200,000 psi, ensuring complete heat penetration. ARP studs are threaded after heat-treat, which gives them 1000% (that's ten times!) better fatigue strength than studs threaded prior to heat-treat. Threading the studs after heat-treating is more difficult and costly (as it's harder on tooling) but the results are well worth the effort. These simply are the best head studs we've found and we highly recommend them in both racing and forced induction applications. Due to the additional clamping force between the head and block, these are IDEAL for turbocharged engines.

Converting from the factory BMW/MINI head bolts to head studs makes it much easier to assemble an engine, especially a racing powerplant which must be serviced frequently (and quickly!), and also ensures proper alignment of the head and gasket. Head studs also provide more accurate and consistent torque loading. Here's why: When you use bolts to secure the head, the fastener is actually being "twisted" while it's being torqued to the proper reading. Accordingly, the bolt is reacting to two different forces simultaneously. A head stud should be installed in a "relaxed" mode -- never crank it in tightly using a jammed nut. If everything is right, the stud should be installed finger tight. Then, when applying torque to the nut, the stud will stretch only on the vertical axis. An information sheet is provided with each set.

ARP is a company that prides itself on performance and durability, no matter the application. Offering the finest engine hardware money can buy is the driving initiative at ARP and this is evidenced by the staggering amount of satisfied customers and race teams the world over.

This item fits the following MINIs:
2002-2006 R50 MINI MINI Cooper
2002-2006 R53 MINI MINI Cooper S

Show More Show Less

Victor Reinz Cylinder Head Bolts - N54

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:373825

Part#: 11127574303

In Stock at Vendor

$ 152.99

This product was last offered at the strikethrough price on
04-15-2026

$ 147.99 USD

Add to Wish List

Qty

$ 147.99 USD

Add to Wish List

Head Bolt set for the N54 engines with aluminum block.

If you drive a European vehicle, chances are high your vehicle came equipped with one or more Victor Reinz gaskets. Choose OE quality VR gaskets and seals and do the job right the first time.

Show More Show Less

Titanium Retainers - Set Of 8 - BMW B48 - Intake Side

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:54388410

Part#: RET-BMB48-TI-8

Ships in 8 Business Days

$ 145.99 USD

Add to Wish List

Qty

$ 145.99 USD

Add to Wish List

By minimizing moving weight, these retainers help prevent valve float at extended RPM ranges, ensuring your engine maintains precise timing and peak power delivery under the most demanding track conditions.

Show More Show Less

Elring Cylinder Head Bolt Set - F01 F02 F10 F12 F13 E70 E71

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:596414

Part#: 11127582454

In Stock at Vendor

$ 143.90 USD

Add to Wish List

Qty

$ 143.90 USD

Add to Wish List

One time use torque-to-yield cylinder head bolts. Always replace as a set whenever cylinder head is removed and reinstalled.

S54 Valve Adjustment Shim Set - With Tools

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:401664

Part#: VSK4KT2

In Stock

Sale - Save 2% $ 141.29

This product was last offered at the strikethrough price on
05-03-2026

$ 139.09 USD

Add to Wish List

Qty

Sale - Save 2%

$ 141.29

This product was last offered at the strikethrough price on
05-03-2026

$ 139.09 USD

Add to Wish List

Proper valve lash adjustment is critical for longevity and performance. If your S54 is due for valve adjustment maintenance you can do it yourself with this kit, saving hundreds of dollars in labor charges.

Includes

Shim set
Installation tool #83300493743
16 Blade Feeler gauge set

BMW recommends S54 valve inspection and adjustment every 30k miles.

*Click here for valve adjustment instructions*

Show More Show Less

Genuine BMW Cylinder Head Bolt Set - F80 M3, F82/3 M4

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:207675

Part#: 11127853937

Ships in 2 Business Days

6% off MSRP $ 145.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 136.99 USD

Add to Wish List

Qty

6% off MSRP

$ 145.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 136.99 USD

Add to Wish List

A full set of cylinder head bolts. Anytime you remove the head you MUST replace the bolts with new ones.

Pro Series Head Bolts W10 W11 1.6L Engine

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:26404879

Part#: 206-3601

Ships in 2 Business Days

$ 131.99 USD

Add to Wish List

Qty

$ 131.99 USD

Add to Wish List

Enhance the performance of your Mini with ARP's Pro series cylinder head bolts. These bolts are cold-forged for maximum molecular integrity and heat-treated to withstand extreme pressure, rated at 190,000 psi. Featuring 12-point heads, each kit includes hardened parallel washers for precise torque readings and even load distribution.

Cold-forged for maximum molecular integrity
Heat-treated to withstand extreme pressure
Rated at 190,000 psi for exceptional strength
12-point heads for easy installation
Includes hardened parallel washers for precise torque readings

Show More Show Less

VENTILATION LINE, EN

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:536476

Part#: 11157848341

Ships in 2 Business Days

Sale - Save 5% $ 138.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 131.62 USD

Add to Wish List

Qty

Sale - Save 5%

$ 138.99

This product was last offered at the strikethrough price on
06-25-2026

$ 131.62 USD

Add to Wish List

This ventilation connecting pipe guides the gases in the PCV system back into the valve cover. Plastic pipes exposed to constantly varying temperatures tend to become weak and crack over time. If yours has split, it may allow gases to escape possibly resulting in poor fuel economy, engine misfires, hissing noises under the hood, and will usually cause the check engine light to illuminate.

Show More Show Less

Project Cars

SELECT YOUR BMW

Sub-Categories

Turner Motorsport Genuine BMW Vanos Central Valve (Long)

Benefits:

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results