Find Parts That Fit Your Vehicle

BMW Engine Parts

Turner Motorsport has everything you need to upgrade your BMW through our stages of performance or to keep your car in peak condition with our range of the latest in proven OEM cooling parts. Upgrade your cooling system and engine performance with the selections below to give your BMW a performance and reliability advantage.

Sub-Categories

Sort By:

ARP Connecting Rod Bolt Set - S54 (M10, 02/2003- Production) ...
Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply
ARP - Corporate Logo
T#:2206
Part#: 201-6102
In Stock
$ 119.99

This product was last offered at the strikethrough price on
10-01-2026

$ 116.99 USD
Free Shipping
$ 116.99 USD
Free Shipping
Set of 12 ProSeries ARP2000 connecting rod bolts for the Euro-spec M3 engine. Made by ARP, the world leader in fastener technology. The best rod bolts available for the Euro S50 and S54. Ideal for ultra high performance, racing & forced induction applications. Each bolt is made of ARP2000 material, which exceeds the strength of 8740 Chrome Moly, and is able to achieve clamp load at 220,000psi. ARP2000 fasteners are used widely in professional motorsport and drag racing as an upgrade from 8740 Chrome Moly in both steel and aluminum rods.

This set replaces the factory BMW Euro S50B30 and B32 rod bolts with part number 11-24-1-317-184 (11241317184) and 11-24-1-405-890 (11241405890). It's also used for S54 engines with stock M10 sized rod bolts, which were used from February 2003 production and later. It was also used in earlier engines that had connecting rods replaced. For these 2001-2003 models there is no easy way to check if the rods were replaced, except by checking the rod bolt diameter. If your car has the earlier M11 sized bolt, use ARP kit #201-6103 . Before opening the ARP kit, we recommend that you check your existing rod bolt size as BMW was not consistent with their applications. ARP bolts are not returnable if the package has been open.

ARP is a company that prides itself on performance and durability, no matter the application. Offering the finest engine hardware money can buy is the driving initiative at ARP and this is evidenced by the staggering amount of satisfied customers and race teams the world over.

These ARP connecting rod bolts fit the following BMWs:
1993-1999 E36 BMW Euro M3
2001-2/2003 E46 M3 coupe / convertible*
2/2003-2006 E46 M3 coupe / convertible
2001-2002 MZ3 M Roadster & M Coupe*
2006-2008 MZ4 M Roadster & M Coupe
* - these engines could have either M10 or M11 sized bolts. If the rods and rod bearings were replaced under recall by BMW it should have the newer M10 bolts and this is the correct ARP set to order.
Show More Show Less
ARP Connecting Rod Bolt Kit - M52, M54B30, N20, N26, N54, N55, B46, B...
Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply
ARP - Corporate Logo
T#:3315
Part#: 201-6303
In Stock
$ 212.99

This product was last offered at the strikethrough price on
10-12-2026

$ 194.99 USD
Free Shipping
$ 194.99 USD
Free Shipping
Set of 12 ProSeries connecting rod bolts, made by ARP -- the world leader in fastener technology. Each bolt is made of ARP2000 material, which exceeds the strength of 8740 Chrome Moly, and is able to achieve clamp load at 220,000psi. ARP2000 fasteners are used widely in motorsport and drag racing as an upgrade from 8740 Chrome Moly in both steel and aluminum rods. These are simply the best connecting rod bolts available, making them ideal for ultra high performance, racing and forced induction applications.

This set replaces the 47mm length factory BMW rod bolts with part number 11-24-7-589-671 (11247589671) Check applications before ordering! Opened ARP bolt kits are not
returnable.

ARP is a company that prides itself on performance and durability, no matter the application. Offering the finest engine hardware money can buy is the driving initiative at ARP and this is evidenced by the staggering amount of satisfied customers and race teams the world over.

This item fits the following BMWs:
1999-2005 E46 BMW 328i 328ci 330i 330ci 330xi
2001-2003 E39 BMW 530i
2004-2005 E60 BMW 530i
2004-2006 E83 BMW X3 3.0i
2000-2006 E53 BMW X5 3.0i
1997-2002 Z3 BMW Z3 3.0i
2003-2005 Z4 BMW Z4 3.0i
Show More Show Less
ARP Steel Block Head Stud Kit for M50/M52 & S50/S52 (US Spec) ...
Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply
ARP - Corporate Logo
T#:3606
Part#: 201-4302
In Stock
19% off MSRP $ 295.92

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 240.99 USD
Free Shipping
19% off MSRP
$ 295.92

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 240.99 USD
Free Shipping
Virtually every top professional BMW engine builder relies on ARP Pro Series head studs. ARP uses a premium grade 8740 alloy that is rated far superior to "aircraft" quality. Each stud is heat-treated to 200,000 psi, ensuring complete heat penetration. ARP studs are threaded after heat-treat, which gives them 1000% (that's ten times!) better fatigue strength than studs threaded prior to heat-treat. Threading the studs after heat-treating is more difficult and costly (as it's harder on tooling) but the results are well worth the effort. These simply are the best head studs we've found for the E36 6 cylinder engines, and we highly recommend them in both the racing and forced induction arena. (Due to the additional clamping force between the head and block, these are IDEAL for turbo charging and supercharging!)

Converting from the factory BMW head bolts to head studs makes it much easier to assemble an engine, especially a racing powerplant which must be serviced frequently (and quickly!), and also ensures proper alignment of the head and gasket. Head studs also provide more accurate and consistent torque loading. Here's why: When you use bolts to secure the head, the fastener is actually being "twisted" while it's being torqued to the proper reading. Accordingly, the bolt is reacting to two different forces simultaneously. A head stud should be installed in a "relaxed" mode -- never crank it in tightly using a jammed nut. If everything is right, the stud should be installed finger tight. Then, when applying torque to the nut, the stud will stretch only on the vertical axis. An information sheet is provided with each set. Kit includes everything pictured -- 14 head bolts, washers, bolts and assembly lubricant.

ARP is a company that prides itself on performance and durability, no matter the application. Offering the finest engine hardware money can buy is the driving initiative at ARP and this is evidenced by the staggering amount of satisfied customers and race teams the world over.

These head studs fit the following BMWs/engines (steel block only)
1992-1995 M50 6 cylinder including 325i, 325is and 525i
1996-1999 M52 6 cylinder including 328i, 328is, 323is, 528i
1995-1995 S50US 3.0 liter including 1995 M3 (US only)
1996-1999 S52US 3.2 liter including 1996-1999 M3 (US) and MZ3
Show More Show Less

ARP Connecting Rod Bolt Kit - E9X M3 S65
Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply
ARP - Corporate Logo
T#:2434
Part#: 201-6001
In Stock
20% off MSRP $ 570.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 453.99 USD
Free Shipping
20% off MSRP
$ 570.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 453.99 USD
Free Shipping
NEW & REVISED!!! ARP has released a new version of their race-grade M3 connecting rod bolts and its better than ever before. If you're replacing your rod bearings these rod bolts are far superior to standard the OE BMW fasteners in terms of durability and ability to withstand stresses. This set of rod bolts is made specifically for the S65 4.0 liter V8, as found in the 2008-2013 M3 and replaces the previous ARP kit part number RBK_S65.
Show More Show Less

E46 M3 Fuel Pump
Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply
Hella - Corporate Logo
T#:40004874
Part#: 16142229684
In Stock
$ 253.79

This product was last offered at the strikethrough price on
07-23-2026

$ 208.99 USD
Free Shipping on orders $49 and up
$ 208.99 USD
Free Shipping on orders $49 and up
Kolbenschmidt Connecting Rod Bearing Set - E28, E30, E32, E34, E36, E...
Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply
Kolbenschmidt - Corporate Logo
T#:341713
Part#: 11241284849
Ships on Feb 16, 2027
$ 70.99 USD
Free Shipping on orders $49 and up
Standard bore - 45mm Set of 8 connecting rod bearings for 4 cylinders/connecting rods. 6cyl, V8, & V12 engines will require additional sets to overhaul all connecting rod bearings.

Main Bearing Set - M20, M42, M50, M52, M44, M54, S50, S52, S54 ...
Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply
Kolbenschmidt - Corporate Logo
T#:12919
Part#: 11211706847
In Stock
$ 110.29 USD
Free Shipping
$ 110.29 USD
Free Shipping
These are the "Yellow" main bearing shells for many BMW 4 and 6 cylinder engines. The size is 60.00mm. Set includes bearings for 6 cylinder cars. 4 cylinder cars get 2 spare bearing sets.

KS Kolbenshmidt designs and produces internal parts for gasoline and diesel engines and is an OEM choice for many automakers. Both increased power handling and reduced fuel consumption are the motivating factors behind this company and they continue to innovate every day.

This item fits the following BMWs:
1990-1991 E30 BMW 318i 318is 318ic
1984-1991 E30 BMW 325e 325es 325i 325ic 325is 325ix
1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
1989-1990 E34 BMW 525i
1997-2003 E39 BMW 525i 528i 530i
2004-2005 E60 BMW 525i 530i
2000-2006 E53 BMW X5 3.0i
2004-2006 E83 BMW X3 2.5i X3 3.0i
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2006 E85 BMW Z4 2.5i Z4 3.0i - M54
2006-2008 E85 BMW Z4 M Roadster M Coupe
Show More Show Less
ARP Main Stud Kit for M50/M52 and S50/S52 (US)
Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply
ARP - Corporate Logo
T#:2208
Part#: 201-5000
In Stock
$ 169.99 USD
Free Shipping
$ 169.99 USD
Free Shipping
This ARP main stud set for the 24 valves M50-based 6 cylinder engines (including M50, M52, S50US and S52US) and eliminates main cap walk and fretting, as well as protects the threads in your engine block. Each stud is made using the best materials, process, design and engineering, which exceeds even the most stringent racing and aerospace specifications. This main stud kit includes aerospace quality nuts. The studs are manufactured from 8740 chrome moly steel, heat-treated in-house to 190,000 psi tensile strength, and precision J-form threads rolled after heat-treat to create a fastener that has threads 1000% stronger than others. On the E30 M3, there's no reason to settle for anything less than the best, which is why we carry and use ARP fasteners and studs on our own BMW race cars. ARP is a company that prides itself on performance and durability, no matter the application. Offering the finest engine hardware money can buy is the driving initiative at ARP and this is evidenced by the staggering amount of satisfied customers and race teams the world over. *Does not include washers*
Show More Show Less

ARP Connecting Rod Bolt Kit - Early S54 - E46 M3, MZ3 (M11x47mm Size)...
Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply
ARP - Corporate Logo
T#:2211
Part#: 201-6103
In Stock
$ 215.99 USD
Free Shipping
$ 215.99 USD
Free Shipping
Set of 12 ProSeries connecting rod bolts, made by ARP -- the world leader in fastener technology. Each bolt is made of ARP2000 material, which exceeds the strength of 8740 Chrome Moly, and is able to achieve clamp load at 220,000psi. ARP2000 fasteners are used widely in motorsport and drag racing as an upgrade from 8740 Chrome Moly in both steel and aluminum rods. These are simply the best connecting rod bolts available, making them ideal for ultra high performance, racing and forced induction applications.

These bolts are M11 size to replace the stock M11 BMW bolt part number 11-24-7-834-310 (11247834310). The M11 bolt size was used in S54 engines up to 2/2003 production. However, most S54 engines up to that point had their rod bearings replaced under a factory recall and some may have had new connecting rods installed at the same time (or even a new engine altogether). The new bolts installed in these earlier engines are M10 size. Unfortunately, there is no way of knowing which rod or bolt is currently in your car (unless your car came with service records detailing when and what was replaced). The only sure way to know is to check the bolts currently installed in your engine. If yours was updated to the M10 sized bolt, use ARP kit #201-6102 . ARP bolts are not returnable if the pacakge has been open.

ARP is a company that prides itself on performance and durability, no matter the application. Offering the finest engine hardware money can buy is the driving initiative at ARP and this is evidenced by the staggering amount of satisfied customers and race teams the world over.

These ARP connecting rod bolts fit the following BMWs:
2001-2/2003 E46 M3 coupe / convertible
2001-2002 MZ3 M Roadster & M Coupe
Show More Show Less

Hella Crankshaft Position Sensor - E36, E39, E46, E53, E60, E83, Z3, ...
Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply
Hella - Corporate Logo
T#:388896
Part#: 12141709616
Back Ordered
$ 40.99 USD
Free Shipping on orders $49 and up

Faulty crankshaft position sensors can cause issues with proper ignition timing and adjustment leading to rough idle, stalling, and potential engine damage. A high quality OEM Hella replacement will have your BMW running smoothly for much less than the cost of a Genuine BMW sensor.

Hella is a premium manufacturer that supplies automotive parts to numerous car brands across the world. Everything from electrical to mechanical genuine parts have been made and supplied directly to BMW before the vehicles ever leave the production floor. Their high quality, long lasting parts have made them a trusted brand chosen to help keep your BMW on the road for many years to come.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Fits BMW models with the following engines: M52 S52 M54 M56

Show More Show Less
ARP S54 Head Stud Kit (E46M3 / MZ3 / MZ4)
Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply
ARP - Corporate Logo
T#:3631
Part#: 201-4303
In Stock
$ 247.99 USD
Free Shipping
$ 247.99 USD
Free Shipping
Virtually every top professional BMW engine builder relies on ARP Pro Series head studs, particularly on the S54 3.2 liter engine. ARP uses a premium grade 8740 alloy that is rated far superior to "aircraft" quality. Each stud is heat-treated to 200,000 psi, ensuring complete heat penetration. ARP studs are threaded after heat-treat, which gives them 1000% (that's ten times!) better fatigue strength than studs threaded prior to heat-treat. Threading the studs after heat-treating is more difficult and costly (as it's harder on tooling) but the results are well worth the effort. These simply are the best S54 head studs we've found for the E46 M3 6 cylinder engines, and we highly recommend them in both the racing and forced induction arena. (Due to the additional clamping force between the head and block, these are IDEAL for turbo charging and supercharging!)

Converting from the factory BMW head bolts to head studs makes it much easier to assemble an engine, especially a racing powerplant which must be serviced frequently (and quickly!), and also ensures proper alignment of the head and gasket. Head studs also provide more accurate and consistent torque loading. Here's why: When you use bolts to secure the head, the fastener is actually being "twisted" while it's being torqued to the proper reading. Accordingly, the bolt is reacting to two different forces simultaneously. A head stud should be installed in a "relaxed" mode -- never crank it in tightly using a jammed nut. If everything is right, the stud should be installed finger tight. Then, when applying torque to the nut, the stud will stretch only on the vertical axis. An information sheet is provided with each set. Kit includes everything pictured -- 14 head bolts, washers, bolts and assembly lubricant.

ARP is a company that prides itself on performance and durability, no matter the application. Offering the finest engine hardware money can buy is the driving initiative at ARP and this is evidenced by the staggering amount of satisfied customers and race teams the world over.​

These head studs fit the following BMWs/engines
2001-2006 E46 M3 coupe & convertible
2001-2002 MZ3 M Roadster & M Coupe (with S54 engine)
2006-2008 MZ4 Z4 M Roadster & M Coupe
Show More Show Less
OEM Hella Intake Temperature Sensor - E36 E46 E39 E38 X3 X5 Z3 ...
Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply
Hella - Corporate Logo
T#:11919
Part#: 13621739510
Back Ordered
$ 38.99 USD
Free Shipping on orders $49 and up

The temperature sensor is mounted in either the intake manifold or the intake air box assembly depending on the model of car. This OEM Hella replacement will insure proper readings and fuel/air mixtures for the given temperature.

Hella is a premium manufacturer that supplies automotive parts to numerous car brands across the world. Everything from electrical to mechanical genuine parts have been made and supplied directly to BMW before the vehicles ever leave the production floor. Their high quality, long lasting parts have made them a trusted brand chosen to help keep your BMW on the road for many years to come.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

This item fits the following BMWs:
1996-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 328i 328is 328ic M3
1999-2000 E46 BMW 323i 323ci 328i 328ci
2001-2005 E46 BMW 325i 325ci 325xi 330i 330ci 330xi - M54 engine only
1997-2003 E39 BMW 525i 528i 530i 540i
1997-2001 E38 BMW 740i 740il 750il
2004-2006 E83 BMW X3 2.5i X3 3.0i
2000-2006 E53 BMW X5 3.0i
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i
1998-2000 Z3 BMW M Roadster M Coupe

Show More Show Less


Kolbenschmidt Exhaust Valve - E60, E61, E71, E82, E88, E90, E92, E93,...
Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply
Kolbenschmidt - Corporate Logo
T#:1196072
Part#: 11347573840
Ships in 3 Business Days
$ 31.99 USD
Free Shipping on orders $49 and up
Replacement exhaust valve
BMW M20 Engine ARP Head Stud Kit - E30 325i, E34 525i
Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply
ARP - Corporate Logo
T#:189783
Part#: 201-4305
In Stock
$ 271.99

This product was last offered at the strikethrough price on
09-24-2026

$ 271.18 USD
Free Shipping
$ 271.18 USD
Free Shipping
Virtually every top professional BMW engine builder relies on ARP Pro Series head studs. ARP uses a premium grade 8740 alloy that is rated far superior to "aircraft" quality. Each stud is heat-treated to 200,000 psi, ensuring complete heat penetration. ARP studs are threaded after heat-treat, which gives them 1000% (that's ten times!) better fatigue strength than studs threaded prior to heat-treat. Threading the studs after heat-treating is more difficult and costly (as it's harder on tooling) but the results are well worth the effort. These simply are the best head studs we've found and we highly recommend them in both racing and forced induction applications. Due to the additional clamping force between the head and block, these are IDEAL for turbocharged engines.

Converting from the factory BMW head bolts to head studs makes it much easier to assemble an engine, especially a racing powerplant which must be serviced frequently (and quickly!), and also ensures proper alignment of the head and gasket. Head studs also provide more accurate and consistent torque loading. Here's why: When you use bolts to secure the head, the fastener is actually being "twisted" while it's being torqued to the proper reading. Accordingly, the bolt is reacting to two different forces simultaneously. A head stud should be installed in a "relaxed" mode -- never crank it in tightly using a jammed nut. If everything is right, the stud should be installed finger tight. Then, when applying torque to the nut, the stud will stretch only on the vertical axis. An information sheet is provided with each set.

ARP is a company that prides itself on performance and durability, no matter the application. Offering the finest engine hardware money can buy is the driving initiative at ARP and this is evidenced by the staggering amount of satisfied customers and race teams the world over.​

This item fits the following BMWs:
1985-1991 E30 BMW 325e 325es 325i 325ic 325is 325ix
1989-1990 E34 BMW 525i
Show More Show Less
OEM Hella Crankshaft Position Sensor - E36 325i 325is 325ic M3 1992-1...
Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply
Hella - Corporate Logo
T#:2082
Part#: 12141726066
In Stock
$ 109.99

This product was last offered at the strikethrough price on
08-03-2026

$ 96.99 USD
Free Shipping
$ 96.99 USD
Free Shipping

This crank shaft position sensor provides the ECU with the engine speed signal. A faulty sensor could cause reduced performance, ignition issue, or even damage directly to internal components of your engine. An OEM Hella replacement ensures long life and is the best option to get your engine running smoothly again. It fits BMW E36 325i 325is 325ic M3 1992-1995 and E34 525i 1991-1995 with M50 engine.

Hella is a premium manufacturer that supplies automotive parts to numerous car brands across the world. Everything from electrical to mechanical genuine parts have been made and supplied directly to BMW before the vehicles ever leave the production floor. Their high quality, long lasting parts have made them a trusted brand chosen to help keep your BMW on the road for many years to come.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

This item fits the following BMWs:
1992-1995 E36 BMW 325i 325is 325ic M3
1991-1995 E34 BMW 525i

Show More Show Less

Ferrea Performance Intake Valve - Stock Size
Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply
Ferrea - Corporate Logo
T#:583445
Part#: F1550P
Back Ordered
$ 34.99 USD
Free Shipping on orders $49 and up

ARP Connecting Rod Bolt Kit - E36 M3 S50/S52 (US only), E46 323/325 ...
Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply
ARP - Corporate Logo
T#:2210
Part#: 201-6201
Ships in 7 Business Days
$ 222.99

This product was last offered at the strikethrough price on
08-13-2026

$ 194.99 USD
Free Shipping on orders $49 and up
$ 194.99 USD
Free Shipping on orders $49 and up
Set of 12 ProSeries connecting rod bolts, made by ARP -- the world leader in fastener technology. Each bolt is made of ARP2000 material, which exceeds the strength of 8740 Chrome Moly, and is able to achieve clamp load at 220,000psi. ARP2000 fasteners are used widely in motorsport and drag racing as an upgrade from 8740 Chrome Moly in both steel and aluminum rods. These are simply the best connecting rod bolts available, making them ideal for ultra high performance, racing and forced induction applications.

This set replaces the factory BMW rod bolt number 11-24-1-739-728 (11241739728) which measures 44mm in length. The 44mm BMW rod bolt was used on all US spec E36 M3 (3.0 and 3.2 liter), 1999-2000 E46 323i/323Ci, 2001-2005 325i/325Ci, Z3 1.9,2.5 and 3.2, as well as Z4 2.5. It was also used on SOME of the M50 2.5 liter engines from 1992-1995 -- but check before ordering! Opened ARP bolt kits are not returnable. If your M50 2.5 liter engine has 53mm rod bolts, you will require kit part# 201-6301 instead.

ARP is a company that prides itself on performance and durability, no matter the application. Offering the finest engine hardware money can buy is the driving initiative at ARP and this is evidenced by the staggering amount of satisfied customers and race teams the world over.

These ARP connecting rod bolts fit the following BMWs:
1992-1995 E36 325i/is *** with 44mm rod bolts only ***
1995-1995 E36 M3 S50 3.0 liter (US model)
1996-1999 E36 M3 S52 3.2 liter (US model)
1999-2000 E46 323i & 323Ci (US)
2001-2005 E46 325i, 325xi & 325Ci (US)
1998-2002 Z3 2.3 / 2.5 liter
1998-2000 MZ3 M Roadster & M Coupe
2003-2005 Z4 2.5 liter
*** DOES NOT FIT E36 328 ****
Show More Show Less
OEM Kolbenschmidt Eccentric Shaft - BMW N55 S55 3.0L
Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply
Kolbenschmidt - Corporate Logo
T#:31092508
Part#: 11377589883
In Stock
$ 676.99 USD
Free Shipping on orders $49 and up
The eccentric shaft is an important component of BMW's Valvetronic system, a form of variable valve lift control. If the teeth on the gear or the lobes have worn out, this can result in improper valve lift, decreased or abnormal performance, and even damage to cylinder head components. Replace your eccentric shaft with this high-quality part from OEM Kolbenschmidt to restore performance and eliminate valve lift issues without the marked-up price of a Genuine BMW eccentric shaft.
Show More Show Less

ARP Main Stud Kit for S54 (E46M3 & Z4M)
Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply
ARP - Corporate Logo
T#:2192
Part#: 201-5002
In Stock at Vendor
$ 171.99 USD
Free Shipping on orders $49 and up
This ARP main stud set is for the S54 3.2 liter, as found in all 2001 to 2006 E46 M3, as well as the 2006-2008 Z4 M Roadster and M Coupe models. Switching to the ARP main stud kit eliminates main cap walk and fretting, as well as protects the threads in your engine block. Each stud is made using the best materials, process, design and engineering, which exceeds even the most stringent racing and aerospace specifications. This S54 main stud kit includes hardened parallel-ground washers and aerospace quality nuts.

The studs are manufactured from 8740 chrome moly steel, heat-treated in-house to 190,000 psi tensile strength, and precision J-form threads rolled after heat-treat to create a fastener that has threads 1000% stronger than others. On the E30 M3, there's no reason to settle for anything less than the best, which is why we carry and use ARP fasteners and studs on our own BMW race cars.

ARP is a company that prides itself on performance and durability, no matter the application. Offering the finest engine hardware money can buy is the driving initiative at ARP and this is evidenced by the staggering amount of satisfied customers and race teams the world over.

This ARP main stud kit fits the following BMWs:
2001-2006 E46 M3 3.2 liter coupe/convertible
2001-2002 MZ3 M Coupe & M Roadster (S54 engine)
2006-2008 MZ4 M Coupe & M Roadster
Show More Show Less
Camshaft Position Sensor
Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply
Hella - Corporate Logo
T#:594791
Part#: 12141726548
Ships in 1 Business Day
$ 83.81

This product was last offered at the strikethrough price on
07-26-2026

$ 82.04 USD
Free Shipping
$ 82.04 USD
Free Shipping

ARP Connecting Rod Bolt Kit for E36 325 with 53mm Rod Bolt
Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply
ARP - Corporate Logo
T#:2186
Part#: 201-6301
In Stock at Vendor
20% off MSRP $ 243.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 194.99 USD
Free Shipping
20% off MSRP
$ 243.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 194.99 USD
Free Shipping
Set of 12 ProSeries connecting rod bolts, made by ARP -- the world leader in fastener technology. Each bolt is made of ARP2000 material, which exceeds the strength of 8740 Chrome Moly, and is able to achieve clamp load at 220,000psi. ARP2000 fasteners are used widely in motorsport and drag racing as an upgrade from 8740 Chrome Moly in both steel and aluminum rods. These are simply the best connecting rod bolts available, making them ideal for ultra high performance, racing and forced induction applications.

This set replaces the 53mm length factory BMW rod bolts with part number 11-24-1-713-342 (11241713342) which was used on SOME of the M50 2.5 liter engines from 1992-1995. Check before ordering! Opened ARP bolt kits are not returnable. If your M50 2.5 liter engine has 44mm rod bolts, you will require kit part# 201-6201 instead.

ARP is a company that prides itself on performance and durability, no matter the application. Offering the finest engine hardware money can buy is the driving initiative at ARP and this is evidenced by the staggering amount of satisfied customers and race teams the world over.

These ARP connecting rod bolts fit the following BMWs:
1992-1995 E36 325i/is *** with 53mm rod bolts only ***
Show More Show Less

Hella Camshaft Position Sensor
Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply
Hella - Corporate Logo
T#:591910
Part#: 13627525014
In Stock
$ 66.99 USD
Free Shipping on orders $49 and up
$ 66.99 USD
Free Shipping on orders $49 and up
Monitors camshaft location
Negative Battery Cable
Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply
Hella - Corporate Logo
T#:553633
Part#: 12427603567
Ships in 3 Business Days
$ 153.73 USD
Free Shipping
$ 153.73 USD
Free Shipping

If your battery cables have become worn or frayed, or the IBS sensor has gone bad, its time for a replacement. BMW use the IBS, or Intelligent Battery Sensor, to determine not only the state of charge but also the batteries health and life expectancy. Using this data the car's charging system can appropriately supply the battery with the correct voltage, no matter the age.

Comes as a single cable with terminal and IBS Sensor pre-installed.

Show More Show Less
Safety Pressure Switch
Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply
Santech - Corporate Logo
T#:641428
Part#: 64531386971
Ships in 1 Business Day
$ 41.97

This product was last offered at the strikethrough price on
07-03-2026

$ 39.49 USD
Free Shipping on orders $49 and up
$ 39.49 USD
Free Shipping on orders $49 and up
Is your air conditioning system faulting by turning on and off at random, leaving you sweating in the hot summer days? The pressure switch shuts off the A/C compressor if the refrigerant pressure is too low or too high to protect your A/C system components from damage. If the switch is faulty, the A/C compressor will shut off at random intervals, or not turn on at all, without cooling the interior cabin. If this is the case with your A/C system, replace your pressure switch to restore cool air.
Show More Show Less


ARP Rod Bolt Kit - S85
Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply
ARP - Corporate Logo
T#:1637703
Part#: 201-6002
Ships on Nov 19, 2026
$ 569.99 USD
Free Shipping
$ 569.99 USD
Free Shipping
OEM Oil Level Sensor - E46 E39 E60 E38 X3 X5 Z3 Z4 Z8
Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply
Hella - Corporate Logo
T#:2123
Part#: 12617508003
Back Ordered
$ 85.83 USD
Free Shipping on orders $49 and up
$ 85.83 USD
Free Shipping on orders $49 and up
This is the oil level sensor / sender for BMW E46 E39 E60 E38 X3 X5 Z3 Z4 Z8.When this part fails it will illuminate a check light on the dash which indicates it needs to be replaced. Includes o-ring.Manufactured by Hella.

Hella is a premium manufacturer that supplies automotive lighting products for numerous car brands around the world. Their high quality, long lasting parts have made them a trusted brand chosen to help keep your BMW bright and visible for many years to come.

This item fits the following BMWs:
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330xi M3
2008+ E90 BMW 335d
1999-2003 E39 BMW 528i 525i 530i M5
1998-2003 E39 BMW 540i
2004-2005 E60 BMW 525i 530i
1998-2001 E38 BMW 740i 740il 750il
2004-2006 E85 BMW X3 2.5i X3 3.0i
2000-2006 E53 BMW X5 3.0i
2000-2003 E53 BMW X5 4.4i X5 4.6is
1999-2002 Z3 BMW Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i
2001-2002 Z3 BMW Z3 M Roadster Z3 M Coupe
2003-2006 Z4 BMW Z4 2.5i Z4 3.0i
2000-2003 E52 BMW Z8
Show More Show Less
ARP Head Stud Kit - N54
Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply
ARP - Corporate Logo
T#:24112781
Part#: ARP-HSK-N54-S
Back Ordered
$ 499.99 USD
Free Shipping on orders $49 and up

AutoTecknic Dry Carbon Competition Oil Cap Cover - Type 1 - For Vario...
Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply
AUTOTECKNIC - Corporate Logo
T#:39971047
Part#: BM-0007
In Stock
$ 64.99 USD
Free Shipping on orders $49 and up
a precision-engineered, lightweight dry carbon fiber upgrade designed to enhance the engine bay of compatible BMW models with an aggressive motorsport look and easy OEM-style installation.

JMTC Version of the JCW Turbo 53039880146 - New N14 / N18 1.6L Engine...
Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply
JM Turbo Coopers - Corporate Logo
T#:23383307
Part#: JM40
In Stock
$ 1,099.99 USD
Free Shipping on orders $49 and up

Elevate your BMW's performance with the JMTC Dual Scroll JM40 K03 turbocharger, meticulously engineered as a reliable and high-performance upgrade compatible with all OEM components. Featuring a high-flow twin-scroll design with an extended tip compressor, this turbocharger ensures early boost delivery and sustained performance throughout the RPM range. Experience exceptional torque, rapid spooling, and sustained power gains across the power-band, offering superior response and increased performance for your BMW.

Benefits:

  • High-flow twin-scroll JM40 turbocharger for BMW upgrades
  • Extended tip compressor for early and sustained boost
  • Outstanding torque and power gains across the entire RPM range
  • Compatible with Mini Cooper N14, N18, and Peugeot RCZ 200 (THP engine)
  • Fits OEM intake boot and various aftermarket intake systems
Show More Show Less
Hella Hella Horn - Low Tone
Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply
Hella - Corporate Logo
T#:590880
Part#: 2768082
In Stock
$ 36.99 USD
Free Shipping on orders $49 and up
Disc Type Low-Tone, 12 V, 335 Hz with Bracket

ARP Main Stud Kit for E30 M3 S14 Engine
Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply
ARP - Corporate Logo
T#:2207
Part#: 201-5001
In Stock
$ 119.99 USD
Free Shipping
$ 119.99 USD
Free Shipping
This ARP main stud set for the E30 M3 eliminates main cap walk and fretting, as well as protects the threads in your engine block. Each S14 main stud is made using the best materials, process, design and engineering, which exceeds even the most stringent racing and aerospace specifications. This main stud kit includes hardened parallel-ground washers and aerospace quality nuts.

The studs are manufactured from 8740 chrome moly steel, heat-treated in-house to 190,000 psi tensile strength, and precision J-form threads rolled after heat-treat to create a fastener that has threads 1000% stronger than others. On the E30 M3, there's no reason to settle for anything less than the best, which is why we carry and use ARP fasteners and studs on our own BMW race cars.

ARP is a company that prides itself on performance and durability, no matter the application. Offering the finest engine hardware money can buy is the driving initiative at ARP and this is evidenced by the staggering amount of satisfied customers and race teams the world over.

This ARP main stud kit fits the following BMWs:
1988-1991 E30 M3 - S14 engine
1984-1985 E30 318i (M10)
Show More Show Less
ARP ARP2000 Head Stud Kit - N55
Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply
ARP - Corporate Logo
T#:42335661
Part#: ARP-HSK-N55-S
Ships in 3 Business Days
$ 743.99 USD
Free Shipping on orders $49 and up
Enhance your BMW N55 engine's ability to handle higher levels of boost with 5150's custom-designed Head Stud Kit from ARP, the global leader in fastener technology!

Hella Hella Horn - High Tone
Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply
Hella - Corporate Logo
T#:592707
Part#: 2768551
In Stock
$ 30.99 USD
Free Shipping on orders $49 and up
Disc Type High-Tone, 12 V, 400 Hz with Bracket

ARP Cylinder Head Stud Kit - Custom Age 625+ - BMW B58 3.0L
Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply
ARP - Corporate Logo
T#:25241791
Part#: B58-CA-203-4706
In Stock at Vendor
20% off MSRP $ 1,027.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 822.99 USD
Free Shipping on orders $49 and up
20% off MSRP
$ 1,027.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 822.99 USD
Free Shipping on orders $49 and up
The Custom Age 625+ is made from a material that has a tensile strength of 260 ksi, which is substantially higher than the 190 ksi of the ARP 2000 head stud. It's an ideal choice for individuals who want to push the limits of their B58 builds and require a stronger head stud.
Show More Show Less
Kolbenschmidt Engine Camshaft - BMW E30 E34 M20 2.5L
Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply
Kolbenschmidt - Corporate Logo
T#:49335130
Part#: 11311716138
Ships in 1 Business Day
$ 234.18

This product was last offered at the strikethrough price on
07-15-2026

$ 218.92 USD
Free Shipping on orders $49 and up
$ 218.92 USD
Free Shipping on orders $49 and up
The camshaft has a critical job that impacts engine performance and efficiency. As the camshaft spins, the cam lobes open and close intake and exhaust valves, which is vital to the engine's operation. If the lobes become worn or damaged, the engine will suffer drastically. It is imperative to replace the camshaft when damaged or when wear occurs to prevent costly repair bills and to ensure the engine is operating smoothly and efficiently.
Show More Show Less
ARP Connecting Rod Bolt Kit for E30 M3 2.3 liter
Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply
ARP - Corporate Logo
T#:2187
Part#: 201-6104
In Stock at Vendor
$ 175.99 USD
Free Shipping
$ 175.99 USD
Free Shipping
Set of 8 Pro-Series connecting rod bolts, made by ARP -- the world leader in fastener technology. ARP Pro Series connecting rod bolts are precision CNC-machined to exacting specifications and designed for optimum reliability. Heat-treated with threads which are rolled to provide up to ten times more fatigue strength, these rod bolts are far superior to standard OEM BMW fasteners in terms of durability and ability to withstand stresses. This rod bolt set is specifically for the E30 M3 S14 2.3 liter engine.

Each bolt is made of ARP2000 material, which exceeds the strength of 8740 Chrome Moly, and is able to achieve clamp load at 220,000psi. ARP2000 fasteners are used widely in motorsport and drag racing as an upgrade from 8740 Chrome Moly in both steel and aluminum rods. These are simply the best connecting rod bolts available, making them ideal for ultra high performance, racing and forced induction applications.

ARP is a company that prides itself on performance and durability, no matter the application. Offering the finest engine hardware money can buy is the driving initiative at ARP and this is evidenced by the staggering amount of satisfied customers and race teams the world over.

These ARP connecting rod bolts fit the following BMWs:
1988-1991 E30 M3 - S14 4 cylinder
Show More Show Less


Hella Oil Level Sensor - F90, G14, G15, G30
Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply
Hella - Corporate Logo
T#:592990
Part#: 12618638755
Ships in 1-2 days
$ 104.99

This product was last offered at the strikethrough price on
07-14-2026

$ 85.99 USD
Free Shipping
$ 85.99 USD
Free Shipping
Mounted on the bottom of the oil pan
Crankshaft Position Sensor
Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply
Hella - Corporate Logo
T#:13793006
Part#: 13627809334
Ships in 3 Business Days
$ 81.99

This product was last offered at the strikethrough price on
05-07-2026

$ 79.99 USD
Free Shipping on orders $49 and up
$ 79.99 USD
Free Shipping on orders $49 and up
ARP Cylinder Head Stud Kit - E9X M3 S65
Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply
ARP - Corporate Logo
T#:554124
Part#: 201-4307
Back Ordered
$ 363.99 USD
Free Shipping
$ 363.99 USD
Free Shipping
ARP uses a premium grade 8740 alloy that is rated far superior to "aircraft" quality. Each stud is heat-treated, ensuring complete heat penetration, to increase the clamping load up to 200,000 psi. ARP studs are threaded after heat-treat, which gives them 1000% (that's ten times!) better fatigue strength than studs threaded prior to heat-treat. Threading the studs after heat-treating is more difficult and costly (as it's harder on tooling) but the results are well worth the effort. These simply are the best head studs we've found and we highly recommend them in both racing and forced induction applications. Due to the additional clamping force between the head and block, these are IDEAL for turbocharged engines.
Show More Show Less

AutoTecknic Dry Carbon Charge Cooler Tank Cap Cover - Gloss Finish ...
Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply
AUTOTECKNIC - Corporate Logo
T#:39971051
Part#: BM-0032
In Stock
$ 64.99

This product was last offered at the strikethrough price on
09-16-2026

$ 57.99 USD
Limited Qty Sale
Free Shipping on orders $49 and up
$ 64.99

This product was last offered at the strikethrough price on
09-16-2026

$ 57.99 USD
Limited Qty Sale
Free Shipping on orders $49 and up
A premium dry carbon fiber engine bay upgrade that enhances the performance styling of compatible BMW models with a sleek, UV-resistant finish and easy OEM-style installation.

Ferrea Performance Exhaust Valve - Stock Size
Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply
Ferrea - Corporate Logo
T#:583444
Part#: F1552P
Ships on Nov 13, 2026
$ 34.99 USD
Free Shipping on orders $49 and up
Mini R5X Fuel Pump
Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply
Hella - Corporate Logo
T#:23416489
Part#: 358146821
In Stock
$ 211.99 USD
Free Shipping on orders $49 and up

If you encounter fuel pressure loss or starting issues despite a functioning engine and spark, consider replacing this unit—a common culprit in such situations. This fuel pressure pump with a level sensor, mounted inside the fuel tank, is the solution to restore your Mini's engine operation.

It's an effective method to diagnose a faulty rear fuel pump when there's a front High-Pressure Fuel Pump (HPFP) in place. Simply check if you can hear the rear fuel pump prime when opening the door or unlocking the car. Listen for a high-pitched, brief whining noise originating from the fuel tank, lasting only a couple of seconds. If absent, it indicates an issue with the primary rear fuel pump.

  • Restores fuel pressure for proper engine function
  • Designed for easy installation within the fuel tank
  • Diagnostic feature helps identify faulty rear fuel pump
Show More Show Less

ARP Head Stud Kit B48 Undercut CA625+, 12pt
Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply
ARP - Corporate Logo
T#:48367044
Part#: 401-4704
Ships on Nov 13, 2026
$ 588.99 USD
Free Shipping on orders $49 and up
ARP Cylinder Head Stud Kit - ARP2000 - BMW B58 3.0L
Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply
ARP - Corporate Logo
T#:1105898
Part#: 201-4701
Back Ordered
20% off MSRP $ 459.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 367.99 USD
Free Shipping
20% off MSRP
$ 459.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 367.99 USD
Free Shipping
For engine builders crafting a high-performance powerhouse, the ARP Cylinder Head Stud Kit is the industry-standard choice for reliability and strength. Each kit features studs, nuts, and washers manufactured from ARP’s proprietary ARP2000 alloy, a material rated far superior to standard aircraft-quality steels.
Show More Show Less

ARP Harmonic Damper Bolt Set - BMW S58
Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply
ARP - Corporate Logo
T#:49092362
Part#: ARP-CBS-S58
Ships in 3 Business Days
$ 134.99 USD
Free Shipping on orders $49 and up
The OE crank bolts are grade 10 torque-to-yield bolts, designed for only a single use. For vehicles making stock power, the stock bolts are more than enough. Unfortunately, vehicles making more power than stock have experienced issues with the stock damper bolts coming loose and breaking, leading to engine and crank damage. 5150 AutoSport worked with ARP to create this ARP Harmonic Damper Bolt Set to address this issue. These upgraded bolts are stronger than the factory bolts and are designed to provide even repeatable torque load, preventing them from breaking and allowing them to be re-torqued as needed.
Show More Show Less

BMW S14 Engine ARP Head Stud Kit - E30 M3
Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply
ARP - Corporate Logo
T#:189786
Part#: 201-4605
In Stock at Vendor
$ 160.99 USD
Free Shipping
$ 160.99 USD
Free Shipping
Virtually every top professional BMW engine builder relies on ARP Pro Series head studs. ARP uses a premium grade 8740 alloy that is rated far superior to "aircraft" quality. Each stud is heat-treated to 200,000 psi, ensuring complete heat penetration. ARP studs are threaded after heat-treat, which gives them 1000% (that's ten times!) better fatigue strength than studs threaded prior to heat-treat. Threading the studs after heat-treating is more difficult and costly (as it's harder on tooling) but the results are well worth the effort. These simply are the best head studs we've found and we highly recommend them in both racing and forced induction applications. Due to the additional clamping force between the head and block, these are IDEAL for turbocharged engines.

Converting from the factory BMW head bolts to head studs makes it much easier to assemble an engine, especially a racing powerplant which must be serviced frequently (and quickly!), and also ensures proper alignment of the head and gasket. Head studs also provide more accurate and consistent torque loading. Here's why: When you use bolts to secure the head, the fastener is actually being "twisted" while it's being torqued to the proper reading. Accordingly, the bolt is reacting to two different forces simultaneously. A head stud should be installed in a "relaxed" mode -- never crank it in tightly using a jammed nut. If everything is right, the stud should be installed finger tight. Then, when applying torque to the nut, the stud will stretch only on the vertical axis. An information sheet is provided with each set.

ARP is a company that prides itself on performance and durability, no matter the application. Offering the finest engine hardware money can buy is the driving initiative at ARP and this is evidenced by the staggering amount of satisfied customers and race teams the world over.​

This item fits the following BMWs:
1987-1991 E30 BMW M3
Show More Show Less
AutoTecknic Dry Carbon Fiber Engine Cover - Version 2 - BMW G80 M3, G...
Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply
AUTOTECKNIC - Corporate Logo
T#:46203538
Part#: ATK-BM-0408-V2
Ships in 7 Business Days
$ 795.00 USD
Free Shipping on orders $49 and up
Transform your G8X engine bay into a true centerpiece with the AutoTecknic Version II Dry Carbon Fiber Engine Cover. Expertly crafted using pre-preg dry carbon and cured in an autoclave, this cover offers a lightweight yet durable upgrade that elevates both performance and aesthetics. The precision 3K twill weave carbon delivers a flawless, uniform pattern, enhanced by a deep gloss UV-resistant clear coat for long-lasting protection against fading and yellowing. What sets this Version II cover apart is the bold tri-colored ///M-inspired stripes, perfectly integrated into the design. Combined with the iconic ///M emblem, the cover captures BMW’s motorsport heritage while adding a modern, aggressive edge to your engine bay. Every detail is engineered for a seamless OEM fit—simply transfer the factory M emblem for a complete installation. Upgrade your G80 M3 or G82/ G83 M4 with this stunning centerpiece and let your engine bay reflect the same dynamic spirit as the car itself.
Show More Show Less
OMP Battery Cut Off Switch / Kill Switch
Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply
OMP - Corporate Logo
T#:1614
Part#: EA-462
Back Ordered
$ 65.00 USD
Free Shipping
$ 65.00 USD
Free Shipping
OMP Battery Cut Off Switch / Kill Switch, for use in racecars as an emergency "kill switch", to depower the electrical system in the event of a crash or other emergency. This cut off switch is FIA approved, has 6 poles and alternator protection, as well as a removable key.
Show More Show Less


AutoTecknic - Carbon Competition Fuel Cap Cover - Various BMW and MIN...
Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply
AUTOTECKNIC - Corporate Logo
T#:39971046
Part#: BM-0006-BCG
In Stock
$ 65.00 USD
Free Shipping on orders $49 and up
AutoTecknic - Carbon Competition Fuel Cap Cover - Various BMW and MINI Models is a premium exterior upgrade crafted from genuine carbon fiber, designed to enhance the aggressive styling and performance aesthetic of compatible BMW and MINI vehicles with an easy, OEM-fit installation.
Show More Show Less
Hella Camshaft Position Sensor - E39, E46, E53, E60, E63, E64, E65, E...
Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply
Hella - Corporate Logo
T#:302290
Part#: 12147518628H
Ships in 1 Business Day
$ 72.99 USD
Free Shipping on orders $49 and up

Used to detect the position of the camshaft, this sensor allows the computer to adjust the ignition timing for optimal performanceand to prevent damage from early or late detonation. Hella replacement sensors will ensure long lasting reliability and will keep your engine running like new.

Hella is a premium manufacturer that supplies automotive parts to numerous car brands across the world. Everything from electrical to mechanical genuine parts have been made and supplied directly to BMW before the vehicles ever leave the production floor. Their high quality, long lasting parts have made them a trusted brand chosen to help keep your BMW on the road for many years to come.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Show More Show Less