BMW Z4 M Roadster S54 (2003-2008)

Liqui Moly is an official sponsor of Turner Motorsport. We work closely with Liqui Moly to ensure your BMW is receiving optimal lubrication!   Select your vehicle to make sure you are viewing the best Liqui Moly options for your application. 

Includes:

• 6 Liters of Synthoil Race Tech GT1 10w-60
• Mann Oil Filter
• Oil Drain Plug & Washer

Liqui Moly GmbH develops and tests all engine oils, additives, and car care products in-house, ensuring all Liqui Moly products extend the life of your engine via optimal lubrication. With more than 50 years of experience and reviews across the world from magazines and race teams, Liqui Moly proves time and time again why they are one of the most innovative lead forces of performance automotive chemicals in the world. Turner Motorsport trusts Liqui Moly to keep all of our race cars - including the M6 - running smooth from the first hotlap to the last.

Turner Motorsport recommends Synthoil Race Tech GT1 10w-60 for your S54 engine. Race Tech is a modern high performance engine oil formulated for engines that experience extreme load pressures. Fully synthetic, the oil combines base oils and additives to provide exceptional lubrication and engine wear protection. This oil provides immediate lubrication upon cold start, offering significantly improved protection compared to other oils. Liqui Moly Race Tech GT1 10w-60 will keep your S54 pulling hard and running smooth on your commute home from work, your touge run through the valley, and while you are trying to get your best times on the track.

This tool comes in handy especially when working with an engine harness. Certain areas are always prone to corrosion and this tool makes having to re-pin a connector a breeze.

Unlike small screwdrivers, picks, and paper clips, these tools are the correct size and shape to remove and install tiny electrical pins and terminals at plastic block connectors with ease, and will not damage the connectors in the process.

Packaged in a blow molded case to keep everything secure and organized.

Schwaben offers the right tools to make your next project a success. Everything from complex engine scanners to brake bleeders and spring compressors, Schwaben tools has you covered.

Some of the recommended use include but are not limited to:

• Remove and install rear ball joints on E38, E39, E60/61, E63/64, E65/66, and E70's
• Removal and installation of ball joints and bushings on rear control arms on E36, E46, E39, E60/61, E63/64,  E65/66, E70, E83 and E85/86 Z4's
• Removal and installation of rear sub frame mounted differential bushings on E36, E46, E83 and E85/86 Z4's
• Removal and installation of rear differential mounted bushings on E36, E46, E9X, E60/61, E63/64, E65/66, and E85/86 Z4's

When changing your oil, you want to make sure you are using the best. Turner Motorsport now offers our premium Castrol TWS Oil service kits to ensure you are getting the best products available for your routine oil services. Everything included has been specifically picked to ensure high quality and outstanding wear protection. 

One of the most popular engine oil choices on the market today, Castrol Edge Professional TWS 10-60 engine oil is premium engine oil approved by BMW for use in a wide variety of engines such as the M30, S54, S85, and many more. In fact, this oil is the same oil that BMW uses for their performance engines from the factory. Thanks to its premium blend of synthetic oil and additives, this oil continues to provide protection under even the harshest conditions and is perfect for both street cars and cars that see occasional track use.

Specifications:

• SAE-10w60
• ACEA A3/B4
• API SN/CF
• VW 501 01/505 00
• Exclusive Approval for BMW M-Models

Included in this Kit:

• Castrol TWS 10w-60 Premium Oil - 6 Liters
• Engine Oil Drain Plug & Washer
• Premium Oil Filter

Proper torque is very important when it comes to working on engines. The importance comes from proper sealing and to keep from damaging threads.

Features:

• Reversible ½-inch drive click-to-stop
• Torque range of 10 to 150 ft-lb
• Accurate to within +/-4%
• 18 inches in length with a convenient carry case

Elevate your BMW maintenance with this comprehensive tool kit designed for valve and valve stem seal removal and replacement, all without the need to remove the head. This time-saving kit ensures efficiency and ease in the process, making it an essential for DIY enthusiasts and professionals alike. The universal fitment and a range of adapters guarantee versatility across various brands and motors, providing maximum utility.

• Removes and replaces valves and valve stem seals without head removal
• Time and effort-saving solution
• Wide range of adapters for versatile use
• Universal fitment for compatibility with different brands and motors
• Essential for DIY and professional use

Contents:

• 1 - Lever Bar
• 4 - Valve Spring Compressor Adapters
• 1 - Slotted/Notched Pulling Device
• 1 - Hook Pulling Device
• 1 - Connector for Valve Spring Adapters
• 1 – Connector for Pulling Device
• 1 - Extension for Valve Spring Adapters

Protecta socket are used to keep ugly scratch marks from showing up after torqueing down wheel lugs.

Features:

• Coated six-point deep-well impact sockets 
• Color coded mar-free exterior coatings that prevent nicks and scratches left by plain metal sockets
• 17mm, 19mm and 21mm Sockets included

Use these with your breaker bar or impact gun to remove the tightest wheel bolts and lug nuts: when reinstalling wheels, use them to final torque wheel fasteners to factory specifications.

Combine these with our torque limiting sockets and the Schwaben ½-inch torque wrench for a complete wheel fastener solution.

When your CPV O-ring fails it causes a slow oil leak on the passenger side of the engine, making an oily mess that frequently resembles a rear main seal leak. Replacing the CPV with an upgraded o-ring ensures a long-term solution to this common problem. 

The factory o-ring over time fails from heat cycling and oil exposure due to the Buna rubber used in OEM o-rings, while the included Viton Fluoroelastomer is resistant to a much higher temperature to ensure prolonged life without leaking. 

The Schwaben Adjustable Wheel Dolly Jack is a top-tier solution for automotive enthusiasts and professionals seeking a dependable, heavy-duty tool to effortlessly lift and move vehicles. This versatile dolly features an adjustable base that fits tires up to 34 inches in diameter and 11 inches wide, making it compatible with a wide range of vehicles. Constructed from robust steel, it can support up to 1300 lbs per unit, ensuring it handles even the heaviest vehicles with ease. A tough, powder-coated finish adds an extra layer of protection against rust and wear, increasing the tool’s lifespan in tough environments.

The innovative design of the open-arm base allows users to slide the dolly under a vehicle's tire without the need to raise the car first, saving both time and energy. Equipped with 360-degree heavy-duty casters, this dolly offers superior maneuverability, letting you easily move your car around the shop, garage, or driveway. The ratcheting foot pedal lift system enables hands-free operation, and the rubberized pad ensures a secure grip while lifting. When used as a complete set of four, Schwaben Wheel Dolly Jacks can lift and move up to 5200 lbs in total, ideal for handling large, heavy vehicles.

Whether you're working in a professional garage or tackling a DIY project, the Schwaben Adjustable Wheel Dolly Jack delivers exceptional performance, durability, and ease of use.

Key Features:

Adjustable Base: Fits tires up to 34 inches in diameter and 11 inches wide. Heavy-Duty Construction: Supports up to 1300 lbs per jack, made from durable steel. Long-Lasting Durability: Powder-coated finish resists wear and corrosion, ensuring extended use. User-Friendly Design: Open-arm base makes it easy to position the dolly under a tire without lifting the vehicle. Enhanced Maneuverability: 360° heavy-duty casters for effortless movement across various surfaces. Hands-Free Operation: Ratcheting foot pedal lift with a rubber pad provides a secure grip for easy lifting. High Capacity: A full set of four jacks can support up to 5200 lbs of vehicle weight. Lifetime Replacement: Backed by Schwaben's lifetime replacement program for peace of mind. Specifications:

Max Tire Diameter: 34" (863 mm) Max Tire Width: 11" (280 mm) Max Weight Capacity: 1300 lbs (590 kg) per Dolly Jack Safety Warning: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. For more information, visit www.p65warnings.ca.gov for details on Proposition 65 warnings.

Enhance BMW engine maintenance with the Crankshaft Socket - B46 / B48 / B58, an essential tool for effortless engine rotation during timing jobs or valve timing adjustments.

• Specifically designed for BMW B46, B48, and B58 engines
• Facilitates easy and precise engine rotation
• Ideal for timing jobs and valve timing adjustments
• Ensures proper alignment and maintenance accuracy

Upgrade your BMW maintenance toolkit with the Crankshaft Socket, providing the necessary precision for timing tasks and valve adjustments on B46, B48, and B58 engines.

Safety is always the most important factor when it comes to working under your car, jack stands are highly recommended. 

Features:

• Ultra light  jack stands only weigh 4.7 lbs each
• All aluminum construction with heavy-duty  flanged bases to safely stabilize loads
• 6 locking positions for a secure load in multiple heights
• Extra heavy duty load pin at .584 in. diameter with a posi lock ball to insure it stays in place
• Min. Height is 10.6
• Max Height is 15.4"
• Large 7" diameter base
• Outer support tube is 2-1/8" in diameter

The fuel pump is held into the tank with a retaining lock ring. Most people would take an extension or punch and tap out the ring with a hammer. But that's the wrong way to do it. You could damage the lock ring, or worse, the tank itself. This handy tool is toothed to match the lock ring and takes a standard 1/2 drive ratchet or small extension. Twist the ratchet and the lock ring comes un-done cleanly and smoothly. A hefty tool that pays for itself over and over. Fits most BMWs from 1988-2013. Also has application for MINI and Porsche.

This metal screw ring tightens down to old the top of the fuel pump or fuel filter assembly dependent on model of vehicle.

Together they make this job simple and easy and ensure a tight fit with a new ring. 

When doing work where the mounts and support need to be removed from the engine or transmission having a engine support bar is wise. By using this engine support the stress is coming off of whatever components are still attached reducing future unnecessary repairs. The safety side of it is having the heavy engine and transmission firmly supported as it should be instead of questionable jack techniques.  

Features:

•  2" longer than most
• Deluxe transverse support for even more stability
•  Two angle chain hooks for safer and more stable chain support 
•  61" long and fully adjustable to any width
•  Weight rating is a full 1000 lbs.
•  Includes four rubber padded feet to prevent slipping and damage to cars finish 
• This tool features a dual hook design for holding engine or transmission in place
•  Powder coated for long life and durability

Note: It is important that chains are hooked to both sides of hook, like in photo to insure load is supported evenly. 

Tired of busting your knuckles from old hardened exhaust hangers?

This Schwaben tool removes the hanger by pressing on the steel hanger bracket and pulling the rubber hanger in one motion. Self centering force pin locks onto the pin while the flat paddle pulls off the rubber hanger from behind. Slim profile and a 25 degree offset works in tight areas.