Turner Motorsport for BMW E36 (1992-1998) M3

TMS E36 solid sub-frame bushings are designed for track and racecars to remove twisting and flexing of the subframe where it mounts to the rear floor. This twisting is one of the causes of rear subframe/floor failure in E36 cars. We originally developed these for our SCCA SPEED World Challenge cars. A BMW's subframe is the heart of the suspension. Because the subframe is mounted with rubber isolators, when the subframe moves, so does the rest of the suspension mounting points. As the rubber wears and becomes more pliable, the alignment and suspension settings move even more. Replace the stock rubber bushings to limit drivetrain and suspension movement and keep your car set up the way it's supposed to be.

Our mounts are designed using a CAD program with further attention paid to making the mount as light as possible. We also notched the flanges to allow the use of the BMW factory removal tools. One front bushing is slotted to allow for compliance between manufacturing standards as BMW specifies. These bushings are CNC machined out of high grade billet aluminum.

Click for installation instructions. (PDF)

The TMS E36/Z3 6cyl Intake Tube Plug is intended to be used in a variety of applications ranging from ASC delete, deleting the idle control valve in a car with a aftermarket engine management system, re-routing the PCV hose to a catch can, aftermarket supercharged engines, or simply plugging one of the hose provisions in the E36 6cyl intake tubes. It also works great as a coolant hose plug. The diameter of the tip is 20mm (just over 3/4"). A low profile Oetker compression clamp is included. The plug can be drilled and tapped for a small air temp/water temp sensor, pre throttle body vacuum/boost/MAP sensor barb, or water alcohol/nitrous/methanol injector or barb. Works with M50, M50TU S52, M52, S52 throttle boots and may work in other applications with a 20mm hose.

Installation Instructions / More Details

This intake tube plug can be used in a variety of ways on these BMWs:
1992-1995 E36 325i, 325is, 325ic
1996-1998 E36 328i, 328is, 328ic
1999-1999 E36 328is, 328ic
1995-1999 E36 M3 coupe, sedan & convertible
1997-1999 Z3 2.8 liter
1992-1995 M50 engine (2.5 liter)
1996-1999 M52 engine (2.8 liter)
1995-1995 S50 engine (3.0 liter / US engine)
1996-1999 S52 engine (3.2 liter / US engine)

BMW E36 LTW Inspired Carbon Spoiler - Sedan offers a modern take on the classic LTW styling, combining precision engineering with advanced materials to enhance your BMW E36. Designed by Turner Motorsport, this carbon fiber spoiler is a tribute to the iconic E36 M3 Lightweight, providing both exceptional performance and a striking appearance.

• Motorsport-Inspired Design: Captures the essence of the E36 M3 LTW with a sleek, carbon fiber construction.
• Versatile Aesthetic: Features four spoiler configurations, allowing customization to fit various styles.
• Clamp-On Installation: No drilling required; installs with simple hand tools and 3M double-sided adhesive tape.
• High-Quality Materials: Crafted from hand-laid 2x2 carbon fiber with a high-gloss resin finish and UV stabilizer.
• Complete Kit: Includes base spoiler, 70mm risers, upper spoiler, gurney flap, billet mounting brackets, gaskets, and hardware for multiple configurations.
• Reversible Installation: Can be easily removed or adjusted without affecting the original trunk or paint.

Turner Motorsport's carbon LTW spoiler is meticulously engineered to offer both aesthetic appeal and superior performance, honoring the legacy of the E36 M3 Lightweight while providing modern upgrades for your vehicle.

Set of 4 universal 2.5" inlet to 4.0" outlet exhaust tips.

Over the years, it is not uncommon for exhaust tips to be damaged and corroded, becoming a "sore spot" of your BMW. To remedy this unsightly feature, we now offer our very own exhaust tips! Featuring stainless steel construction and a simple, yet sporty design, this exhaust tip will look perfectly at home on almost any model.

Features & Specifications:

Swivel feature for perfect alignment of the exhaust tips in the rear bumper
2.5" Inner Diameter
4.0" Outer Diameter
Black Chrome
Double Wall Construction
Angle Cut Style
Includes Stainless Steel Clamp

These bushings have the hole off-center to give your car a little more track, caster, and camber. This style came as standard equipment on E30 M3s (8/89-later) and 1995 E36 M3 but will work with any E30, E36, Z3.

Rubber control arm bushings are designed to flex and absorb energy. That's fine on a streetcar but on an all-out racing machine you want your alignment to stay constant. We have picked Delrin for this application due to its high rigidity and low coefficient of friction allowing for minimal suspension bushing deflection (geometry change) but decreasing bushing windup or drag (friction). They are not recommended for street-use but highly-recommended for track cars.

To save time, pick up a pair of new bushing carrier brackets and hardware. This will save you the time and hassle of pressing out the old bushings. This will especially save you time if you're buying new control arms at the same time (no time wasted removing the old brackets from the arms). Stainless steel set screws included.

Turner Motorsport Polo shirts are perfect to show your passion for the race team when you're not in the garage. Pick one up today!

Don't see your size available? Give us a call at 1.800.280.6966 - we have you covered.

Upgrade your driving experience with the BMW Black Anodize Turner Motorsport Aluminum Pedal Set for E30/E36/E46/E9x Automatic Transmission.

Crafted with precision and designed for performance, this pedal set enhances both the aesthetics and functionality of your BMW. The set includes pedals tailored specifically for automatic transmission vehicles, ensuring a perfect fit and seamless integration. Elevate your control and comfort with these premium aluminum pedals, engineered to withstand daily use and enhance grip. Transform your BMW's interior with this sleek and stylish upgrade, brought to you by Turner Motorsport.

• Enhances driving aesthetics and functionality
• Precision-engineered for optimal performance
• Tailored for automatic transmission vehicles
• Premium aluminum construction for durability
• Provides enhanced grip for improved control

By the early 1990s, BMW had phased out its canister-style ignition coil in favor of an individual coil-on-plug system. The venerable M50 was one of the first engines to receive this update, which boasts greater overall efficiency through increased ignition control and spark energy. Unfortunately, over two decades later, the ignition coils used on the M50, M52, S50, and S52 engines are antiquated at best. Our team of engineers and BMW enthusiasts realized the need for an ignition system upgrade and set out to modernize the M5X ignition system with performance ignition coils pulled from the B58 parts bin.

WHY UPGRADE?

B58 ignition coils provide up to 2.5 times more spark energy than OE M5X ignition coils, effectively eliminating misfires even on high-performance setups. Whether your vehicle is heavily modified or completely stock, these ignition coils deliver unparalleled performance with zero downsides! For tuners, the Turner Motorsport kit also allows for precise adjustments to ignition dwell time through standalone engine management, giving you complete control over your engine’s performance.

Our kit utilizes the factory mounting locations and includes a proprietary boot design with a built-in 1k OHM resistor. Unlike many aftermarket options, our design prevents electrical contact springs from burning out, ensuring long-term reliability and durability. The included ignition coil bracket and cover plate are manufactured from durable 5052 aluminum, combining rugged durability with a premium aesthetic. Designed and optimized in-house using cutting-edge 3D scanning hardware and CAD software, our kit ensures a perfect fit and a clean, factory-like appearance. Installation is a breeze with the included adapter harness, allowing you to add modern ignition coils to your M5X with ease!

Eliminate misfires and unleash the full potential of your M5X-equipped BMW with our industry-leading B58 ignition coil upgrade. Designed for easy installation and unparalleled reliability, it’s the ultimate plug-and-play solution for performance enthusiasts.

FEATURES:

B58 ignition coils offer upwards of 2.5x more spark energy than the OE M5X ignition coils Eliminates common ignition system defects - no more chasing misfires or swapping around coil packs! The included brackets, cover plates, wiring harness adapters, and proprietary boots make for an easy installation Confirmed functionality with factory M3.3.1 (OBDI) and MS41 (OBDII) DME software PART DESIGN:

Bolt-on ignition coil brackets are manufactured from 5052 aluminum and feature a black anodized coating for superior durability, ensuring a lasting finish 5052 brushed aluminum cover plates ensure a cohesive, OEM+ aesthetic Utilizes factory ignition coil mounting locations and corresponding hardware for easy installation Our proprietary rubber boot design incorporates the factory B58 1K OHM resistor, preventing the electrical contact failure commonly associated with other aftermarket kits Coil adapter harnesses feature durable Weatherpack connectors, safeguarding each wire from exposure to water Compact design allows for retaining the factory beauty cover and/or clearance with aftermarket top-mount turbocharger kits KIT CONTENTS:

Turner Motorsport B Series Ignition Coils for M50, M52, S50, and S52 (6) Turner Motorsport B58 Ignition Coil Conversion Wiring Harnesses (6) Turner Motorsport B58 Ignition Coil Conversion Brackets & Cover Plates (6) Optional Selections: Spark Plugs: NGK BKR6EQUP (OEM), Bosch FGR7DQP (OEM), BMW 12120037607 (Genuine) Spark Plug Socket: Schwaben Extended 5/8" (16mm) Magnetic Spark Plug Socket, Bavarian Autosport 12" x 5/8" Spark Plug Socket INSTALLATION & SUPPORT:

Need installation tips? Our R&D team has assembled a full, start-to-finish installation tutorial, including detailed removal instructions and high-definition images! See the Installation PDF under the "INSTALLATION" tab for more information.

Set of 2 universal 2.5" inlet to 3.5" outlet exhaust tips.

Over the years, it is not uncommon for exhaust tips to be damaged and corroded, becoming a "sore spot" of your BMW. To remedy this unsightly feature, we now offer our very own exhaust tips! Featuring stainless steel construction and a simple, yet sporty design, this exhaust tip will look perfectly at home on almost any model.

Features & Specifications:

Swivel feature for perfect alignment of the exhaust tips in the rear bumper
2.5" Inner Diameter
3.5" Outer Diameter
Mirror Chrome Finish
Double Wall Construction
Angle Cut Style
Includes Stainless Steel Clamp

BMW E36 Z3 Turner Motorsport Power Pulley Kit is the ultimate performance upgrade for BMW enthusiasts. Designed by Turner Motorsport, this power pulley kit enhances engine performance and responsiveness, delivering an exhilarating driving experience. With its high-quality construction and precise engineering, it ensures durability and reliability for your BMW.

• Designed by Turner Motorsport for optimal performance
• Enhances engine performance and responsiveness
• High-quality construction for durability
• Precise engineering for reliability

Single piece 6061 construction, optimized cooling, provisions for temp sensor, and external cooler with removable air duct.

Built to last, made from a single piece of 6061 billet aluminum with a rugged and good-looking hard-coat anodizing our diff cover can handle anything you throw at it. Not only is it an absolute masterpiece to look at but the billet diff cover checks all the boxes for features needed. Reinforced mounting ears for strength and stability, never again will you break an ear off your diff cover like the factory units are known to do. Each ear is not only unified with the one-piece billet cover but also feature added material for the highest durability possible. This diff cover is cool, literally, the entire construction was designed with optimized cooling in mind. External fins are strategically placed on the rear face, bottom, and between the mounting ears of the cover, serving as effective heat sinks for optimal heat dissipation. This ensures stable temperatures, promoting longevity for both the fluid and your differential. Additionally, the internal design ensures continuous oiling and lubrication to the ring gear, maintaining its stability and preventing fatigue by controlling heat more effectively. An internal baffle at the cover's corner helps maintain proper pressure and prevents cavitation.

All of the OEM features were retained along with the upgrades. The mounting surface was designed to be compatible with both the OEM gasket or RTV of your choosing, some people don't trust the gaskets and we get it. You can transfer your speed sensor directly to your upgraded billet cover and it even features a provision for the sensor wire mounting. Factory bushing geometry allows you to use any E36 diff busing including rubber, poly, and even solid mounts. The drain and fill plugs on the diff cover are upgraded to -6AN using the provided high-pressure fittings with replaceable o-rings. The drain and fill plugs can now also be used for expanding to an external oil cooler allowing you to further expand the fluid capacity for optimized cooling and service intervals. To keep an eye on things from the driver seat is 1/8 NPT provision for temp sensors, this product from Turner has you covered at every turn.

Why the upgrade?

If you're new to differential covers used in earlier generations like the E30, you'll find significant improvements in the OEM E36 cover. Unlike the E30's single mount design, the E36 features a dual mount design, which was introduced to address common issues such as broken mounts due to worn-out bushings and aggressive driving. This upgrade significantly enhanced durability and reliability.

While the factory E36 differential cover was a significant improvement with its dual mounts compared to the previous generation, there are still some shortcomings that the original cover doesn't address. Most factory differential covers, including those on the E36, are cast from aluminum. However, due to the porous nature of cast aluminum, the mounting ears on these covers cannot withstand the intense shocks typical in motorsport or in vehicles with significantly increased power.

Upgrading to our Reinforced Billet Differential cover gives you the strength you need to push your car to its limits without worrying about snapping a diff mount from clutch kicking or other shocks to the drivetrain. In addition to its enhanced strength, this differential cover includes numerous other upgrades and conveniences. These include improved cooling and lubrication for the ring gear, upgraded fill and drain plugs, and the option to expand an external oil cooler for extreme motorsport usage. Designed to complement both upgraded daily drivers and extensively modified track cars, it also boasts a visually appealing design.

Key Benefits:

Reinforced mounting ears for strength and stability - never again will you break an ear off during an aggressive drive or track event
External fins on the back side, bottom, and mounting ears on the casing for maximum cooling and consistent fluid temps
Removeable air duct to direct air across the cooling fins for even more temperature control
Optimized internal design to keep fluid consistently on the ring gear
Integrated breather to prevent cavitation by venting the appropriate amount of pressure being built up in the diff housing
-6AN ports to incorporate the use of a differential cooler - this increases capacity and lowers temps allowing for extended fluid change intervals
1/8 NPT fitting for the use of a temp sensor to monitor fluid temperature
Design:

Single piece 6061 Billet aluminum construction
T6 Black hard coat anodizing for superior corrosion resistance and aesthetics
Compatible with most differential coolers(-6AN) and temp sensors(1/8 NPT)
Designed to accommodate oversized rear sway bars
Retains OEM mounting features including the use of the OEM gasket
Factory geometry bushing size for use with OEM and aftermarket poly bushings
Removeable air duct for easy access to sensors and drain/fill plug
Retains OEM speed sensor and wire mount location
Product development:

Our Reinforced Billet Diff Cover was designed, engineered, tested, and quality inspected by our Research and Development team at Turner. Nothing but the highest level of precision and quality through leading-edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer, and rigorous long-term product testing.

Over the years, it is not uncommon for exhaust tips to be damaged and corroded, becoming a "sore spot" of your BMW. To remedy this unsightly feature, we now offer our very own exhaust tips! Featuring stainless steel construction and a simple, yet sporty design, this exhaust tip will look perfectly at home on almost any model.

Features & Specifications:

3.0" Inner Diameter
4.0" Outer Diameter
Black Chrome Finish
Double Wall Construction
Slant Cut Style
Includes Stainless Steel Clamp