Showing 244 results for ""

Custom exhaust work in the plans? The Schwaben Exhaust Pipe Cutter will help you cut out old pipe or cut down new pipe with ease. It can cut any pipes from 3/4" to 3" in diameter and cuts pipe with only 1/4 turn adjustments, thanks to 15 blades that effectively cut the entire pipe with little movement. This is great for tight to reach places that prevents you from using more traditional non-specialty tools.

Features:

• Cuts from 3/4" pipe up to 3" pipe
• 15 cutting blades
• Rubber covered handles for grip and comfort

This gauge ensures that the inlet and exhaust cams are aligned perfectly. Make sure the edges are on the correct sides of the cylinder head before using.

Includes two alignment pin's which is ideal for inspection and servicing the motor with the timing chain still attached. If you are going to be removing the timing chain for service, you will need to lock both cams. 

The Ultimate kit includes every thing the standard kit does along with, a second alignment bridge, flywheel lock pin, VANOS alignment tools. and 4 bolt crank socket.

This tool fits all S54 powered BMW, including: 
2001-2006 E46 BMW M3
2001-2002 E36/7 BMW Z3M Coupe Z3M Roadster
2006-2008 E85/6 BMW Z4M Coupe Z4M Roadster
 

Tired of busting your knuckles from old hardened exhaust hangers?

This Schwaben tool removes the hanger by pressing on the steel hanger bracket and pulling the rubber hanger in one motion. Self centering force pin locks onto the pin while the flat paddle pulls off the rubber hanger from behind. Slim profile and a 25 degree offset works in tight areas.

Commonly used when replacing axle shaft boots.

Features:

• Crimp and flatten design
• Produces a clean factory style crimp
• Limited Lifetime Warranty

Schwaben has a solution to those hard to reach hose clamps with 8mm hex nuts. This 8mm driver features an overall length of 10-1/2" and a flex shaft length of 6". The ergonomic handle features a non-slip grip for when your hands are oily or wet.

8mm/ 5/16" are commonly found on aftermarket hose clamps. 

Our aluminum wheel hanger makes it easy to remove and install wheels. Just thread the hanger stud into a wheel bolt hole and hang the wheel safely while you rotate tires or remove them for service or vehicle repair. (It's also great for keeping wheel bolt holes aligned on cars with spacers.)

Features:

• Longer & Lighter
• Made of 6061-T6 aluminum
• Anodized for hardness and good looks
• Knurled, non-slip handle has a drilled hole so you can hang it on a pegboard hook in your garage

Better still, order two: one for your garage and another for the emergency tool kit in you trunk.

Your car doesn't just have to be sitting for the season in storage to need a memory saver, sometimes just having the car up for the week could cause the battery to drain. Don't waste time sitting and resetting all of your electronics once you get your car back together, get out there and drive, let the memory saver lock in your settings.

Features: 

• Avoid loss of memory during car battery replacement

• Works with most cars with OBDII 1996 and latter

• Comes with two power leads, one hooks to a 9 volt battery (9 volt battery not included), or use the other 82" long lead that can be clamped to any 12 volt battery or power source.

• Polarity Protection, LED Power Indicators identify connection status and low battery power indicator.

The Schwaben Magnetic Camber Gauge measures the Camber angle on the wheel hub or brake disc and allows on-car adjustment to ensure correct wheel alignment. This is a useful tool for setting Camber angles back to pre repair setting after dismantling and re-assembling of the suspension or struts and is an ideal track day companion.

Features:

• Easy to use magnetic gauge attaches to the hub or brake rotor
• Graduations of +/- 6 degrees 
• Comes supplied in a durable storage case
• Measurements are 5" long with a 2" magnetic base

This professional-grade deluxe fender roller allows you to gently and gradually flatten your inner fender lips in order to increase your fender to tire clearance.

This new deluxe fender roller has been designed to fit most applications.

This is the perfect tool for:

If you want to lower your vehicle
If you want wider-than-stock wheels
If you are going to use wheel spacers or decreased offset
Will work with bolt patterns of 4x100 and 5x100 up to 4x114.3 and 5x130 with 12mm or 14mm lug bolts.

By rolling the fender lip flat, you can lower your car further, and give your car a wider stance, without your tires rubbing on the inside of the fender.

Fully adjustable for use on vehicles of different ride heights, offsets, and wheel bolt patterns.

Use of a heat gun is recommended to soften the fender surface during the rolling process and prevent paint cracking.

Makes those hard to reach hose clamps much easier to loosen up.

Features:

• 7mm driver
• 6"  flex shaft
• Overall length of 10-1/2"
• No-slip grip resistant to wet or oil coated hands

Schwaben Locking Hose Pinch-Off Pliers have adequate clamping force to effectively seal large or pressurized cooling system hoses. These pliers are ideal for clamping shut most hoses, ensuring reliability in your automotive tasks. With swivel jaws, they provide even clamping force, making them a versatile tool for various applications.

• Adequate clamping force for large or pressurized hoses
• Ideal for clamping shut most hoses
• Swivel jaws ensure even clamping force
• Versatile tool for automotive maintenance

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. For more information, visit http://www.p65warnings.ca.gov.

 A complete set offered to ensure that the proper lifting techniques are at use. It's never wise to work under a vehicle supported by only a floor jack, with this complete kit you get a complete matching set to get the job done safe and fast.

• Special low profile thick frame side plates and reinforced lift arm for added strength and use.
• Wide track front wheels help provide chassis torsion control and durability.
• Angular positioned pump pistons provide maximum effective pump stroke even when jack is completely under the vehicle.
• Ball bearing mounted rear swivel caster wheels for easy maneuverability.
• Side mounted handles for carrying and easy positioning.
• Overload and bypass safety valve prevents jack overload and over extension.
• Two piece quick release padded handle for storage or transport.
• Dual piston's for 5 pump full extension

Details:

• Jack Capacity 2 Ton
• Max Lift Height 20"
• Low Height 3.25"
• Chassis Length 26.5"
• Overall Width 13"
• Saddle Diameter 4.5"
• Handle Lenght 50"
• Shipping Weight 50 lbs

Schwaben 12" wheel Stands:

These stands are made from special EPS foam with an anti-skid coating.

Won't scratch or mark your floors!

Lightweight at only 5 lbs each, makes these stands easy to carry and maneuver.

Works on virtually any surface, including sand!

Will not scoot, slip or slide, no matter the surface.

Specs:

12" tall,15.75" long,12" wide.

Works on wheel diameters from 25 to 30 inches.