Showing 553 results for ""

Differential bushings are responsible for keeping the differential in solid alignment while dampening drivetrain vibration. While OE rubber bushings are fine when they are new from the factory, aged and worn out rubber bushings create a multitude of issues that can range from annoying to dangerous. As a factory bushing ages, it begins to harden and become brittle. When this happens the bushing will actually shrink and allow for movement at the differential mounting point. At this point, the differential is free to shift under load causing a noticeable clunking noise under acceleration and deceleration and massively increasing the stress on the driveshaft and axles. Manual transmissions suffer the worst from this as it can make shifting difficult since the differential will shift when the clutch is engaged and disengaged.

By replacing these bushings with full polyurethane, the movement is eliminated since the mounting point is supported by a much stiffer material that will not harden or shrink over time. This means less stress on the driveshaft and axles and greater longevity of supporting components. 

Powerflex Black Series bushings are the ultimate in track and race bushings. Featuring 95A durometer polyurethane, Black Series bushings are 25% stiffer than street bushings. Engineered to perform, Powerflex performance polyurethane control arm bushings offer a supreme level of control, while still providing enough comfort for the street, with advanced polyurethane that reduces NVH that often accompanies lesser bushings. Expect improved acceleration response, more direct shifting feel and overall improved drivetrain composure with Powerflex performance polyurethane bushings.

Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers. 

Stock mounts are made from soft rubber and are sometimes filled with fluid to give a car the most comfortable ride possible. The soft rubber and fluid helps to reduce the total amount of vibration, noise, and harshness (NVH) that is transferred into the cabin. The problem with this is driveline slop. The stock mounts allow a lot of excess movement and increases the amount of time it takes to transfer power to the wheels.

In order to address this issue, performance mounts can be substituted to reduce the amount of slop and transfer power to the wheel quicker. Two options for this are polyurethane mounts and solid mounts.

Solid mounts are great for an immediate transfer of power but allow for a ton of noise and vibration to be felt and heard in the cabin of the vehicle. This is great for the track where there aren't any issues with excess harshness, but as a daily driver, this can become an annoying pain in the neck.

The best middle ground is Polyurethane. Polyurethane is much stiffer than rubber and gives you the much stiffer feel you may be looking for. This allows for the increase in responsiveness, but isn't so extreme that it transfers all of the sound and vibrations into the cabin. This makes it much more comfortable for daily use while still reinforcing your driveline.

Features:

• Aluminum and Polyurethane Construction
• 80A Durometer Rating
• New Hardware

Tired of dealing with excess shifter slop and a mushy shifter? The Turner Shifter Rebuild & Upgrade Kits will restore your shifter's crisp feel and eliminate excessive movement that develops over time with wear. Included in this kit are all the common wear components and upgraded bushings that will give you a tighter shifting feel than traditional rubber bushings and will resist wear significantly longer.

This kit is perfect to restore your driving pleasure and will be the last shifter rebuild you will ever need!

See the included components under Kit Contents below.

Opt for the specified synthetic fluid recommended by BMW for the hydraulic unit in your SMG transmission. As outlined in the BMW technical article from May 2008, this fluid meets the required specifications for optimal performance.

The BMW Shifter Carrier Arm Bushings - Round are crucial components designed to enhance the performance and functionality of the shifter assembly in various BMW models. These bushings provide critical support for the shifter carrier arm, improving the overall shifting experience and driving dynamics.

Key Features:

1. High-Quality Material:

   • Crafted from durable materials, these round bushings are engineered to withstand the rigors of daily driving and performance use. Their robust construction ensures long-lasting reliability and performance.

2. Enhanced Shifting Precision:

   • By reducing play and unwanted movement in the shifter mechanism, these bushings allow for more accurate gear engagement. This improvement translates to a more responsive and connected feel when shifting gears.

3. Improved Shift Quality:

   • Replacing worn or degraded bushings with new round bushings can significantly enhance shift quality. Drivers will notice a reduction in vagueness and a more direct response when changing gears, contributing to a more engaging driving experience.

4. Simple Installation:

   • Designed for ease of installation, these bushings can typically be replaced using standard hand tools. While experienced DIYers can handle the job, professional installation is recommended to ensure proper alignment and function.

5. Wide Compatibility:

   • Suitable for a variety of BMW models, these bushings are an excellent upgrade for enthusiasts looking to improve their vehicle's shifter performance and feel.

Benefits of Upgrading or Replacing:

• Direct and Engaging Shifting: New bushings eliminate excess movement in the shifter assembly, providing a firmer and more enjoyable shifting experience.
• Vibration Dampening: Fresh bushings help absorb vibrations, reducing noise from the shifter area and contributing to a quieter cabin environment.
• Extended Component Life: By replacing old, worn bushings, you can prevent additional wear and tear on the shifter assembly, ultimately extending its lifespan.

In summary, the BMW Shifter Carrier Arm Bushings - Round are essential for enhancing the performance and feel of the shifter in various BMW models. By improving shifting precision and overall driving dynamics, these bushings are a valuable addition for any BMW owner looking to elevate their driving experience.

Elevate your BMW's maintenance routine with this specialized butyl tape tailored for the center support bearing. Usually replaced during servicing, this butyl tape plays a crucial role in providing proper sealing and support for your BMW's center support bearing, contributing to enhanced performance and extended longevity.

Key Benefits:

• Specifically designed for BMW center support bearing maintenance
• Ensures proper sealing and support
• High-quality tape for reliability and durability

Some modifications to your vehicle may not produce power to create gains in the overall performance of your driving. When you add a "Po' Boy" clutch stop to your BMW the performance gain is directly felt in the driving experience.

The ECS clutch stop allows the driver to fine tune the position of the clutch pedal to closely match the engagement point for precise, quicker shifting. The adjustment range found in this product can be set to the stock engagement point or can be adjusted to follow the wear of the clutch.  Meaning your new experience will never change all the way to the end of the clutch life and can be reset to enjoy the next clutch.

Note: This modification might require some slight modification to the clutch switch mounting bracket, which can be bent slightly by hand.

E46 M3, Z4 M Front Wheel Hub Assembly with Bearing. This is an OEM Wheel Bearing Hub Assembly. Available from FAG or GSP. Both meet all of the OE specifications for fitment and life.

FAG is an OE supplier to BMW as well as several other German marques. (SKF does not have a front bearing assembly for the E46 M3).

GSP is a high-quality supplier for aftermarket suspension components. They have quickly position themselves as an industry leader, and pride themselves on offering high-quality alternatives to their expensive OEM counterparts.