BMW 3 Series E46 (1999-2005)

PRESSURE BRAKE BLEEDER:

We know bleeding brake alone is not only no fun, but much more complicated than it needs to be. Having a pressure bleeder give you the ability to keep the pressure on the brake system while you go under and crack open the bleeder screws to relieve the air pockets.

Features:

• Holds a full 3-Liters (3.17 qts) of brake fluid
• Easy to read 0-30 lbs pressure gauge built into the tank top
• Pressure relief valve for safe release of pressure
• 40" hose with detachable swivel fitting

FLUID CATCH BOTTLE:

keep your fluid's off the floor and into our catch bottle.  The bottle has fluid level markings from 0.2L to 0.7 liter. This feature allows you to measure how much fluid you have sent thru the system.  Our bleeder bottle features an expandable/collapsible top portion for easier storage. Gasket in cap prevents leakage. Tubing is extra long at 24" from cap to nipple. Flexible hose can be pushed down into bottle for storage when done. Bottle now features a handy hanger bracket to hang bottle from bottom of car.

Note:

• Do not exceed 20 PSI
• LIFETIME REPLACEMENT

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

WHEEL STORAGE RACK:

Now you can stack your extra wheels without the danger of scratches and scuffs. This wheel storage rack keeps your wheels spaced apart, and being on locking casters, allows you to easily move the whole set anywhere in your garage or shop at one time. Sturdy steel construction and a wide base means this wheel rack won't tip over. Holds up to 275 lbs - enough for most any wheel & tire set.

Fits up to 8½" wide wheels, depending on offset

TIRE STACK COVER:

This tire stack by Schwaben is the solution to keeping your tires and wheels clean while in storage.

• Works with 4 tire stacks and works great with our Schwaben Wheel Tree (ES2710754).
• Durable 150D coated material is rated for outdoor use.
• Cover is a large 32" wide X 46" tall.
• Fitted with a long 29" zipper up the side for easy installation and removal.
• Nylon draw string at the bottom allows for a good snug fit.
• Includes a handy storage pouch if not in use.

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

When you push your powerplant, thermodynamics push right back. The toll of high performance is higher heat load – and many stock components begin to complain. But Active Autowerke has you covered - this upgraded fan clutch increases viscous coupling of cooling fan blade speed to water pump speed, yielding increased airflow through the radiator for more efficient cooling. A simple, yet wonderful, thing.

This product fits the following BMWs:
1992-1999 E36 323i 325i 328i 330i M3
1998-2006 E46 323i 325i 328i 330i M3

3/8-INCH DRIVE LONG FLEX HEAD RATCHET:

This professional quality flex ratchet features a fine satin finish designed for durability and easy clean up. Special designed 72T gear mechanism uses only 5 degree of handle movement between gears. This is  especially useful in tight areas. Flex head has 7 detent positions in a 180 degree swing. Push button release holds socket tight until you are ready to release.  No more dropped sockets. Ratchet is a full 290mm ( 11") long for extra leverage.

Part of our LIFETIME REPLACEMENT PROGRAM

1/2-INCH DRIVE LONG FLEX HEAD RATCHET:

This 1/2" drive flex head ratchet features a fine satin finish designed for durability and easy clean up. Special designed 72T gear mechanism uses only 5 degree of handle movement between gears. This is  especially useful in tight areas. Flex head has 9 detent positions in a 180 degree swing. Push button release holds socket tight until you are ready to release.  No more dropped sockets. 

Part of our LIFETIME REPLACEMENT program

Aluminum 3-Ton Jack Stands With Mechanic's Folding Ground Pad - Set Of 2 are designed for exceptional performance and convenience in automotive maintenance. These lightweight aluminum jack stands provide robust support, while the mechanic's folding ground pad ensures comfort during vehicle work.

• Lightweight Construction: Each jack stand weighs only 4.7 lbs, making them easy to handle without sacrificing strength.
• Durable Design: All-aluminum construction with heavy-duty flanged bases ensures stability and safety for loads up to 3 tons.
• Adjustable Heights: Features 6 locking positions with a minimum height of 10.6 inches and a maximum height of 15.4 inches.
• Secure Load: Extra heavy-duty load pin with a posi lock ball mechanism keeps the pin securely in place.
• Large Base: Equipped with a 7-inch diameter base for enhanced stability.
• Mechanic’s Ground Pad: Provides comfort with high-density foam and a heavy-duty cover that resists oils and fluids. Measures 17"W x 47"L when unfolded and includes built-in carrying handles.

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

The Schwaben 24 Piece 1/2" Drive 6 Point Deep and Standard Socket Set comprises two dozen 1/2-inch metric sockets, each featuring 6-point heads specially crafted for navigating those tricky, confined spaces. With a length of 76mm, the deep sockets ensure you can reach critical areas with ease.

Furthermore, our LIFETIME REPLACEMENT program provides you with added assurance, ensuring enduring performance and value. Improve your toolkit with the Schwaben 24 Piece 1/2" Drive 6 Point Deep and Standard Socket Set and confidently tackle any task at hand.

Features:

Access Tight Spaces: These deep sockets, measuring 76mm in length, are expertly designed to reach challenging, confined areas, making them perfect for intricate tasks.

Organized Storage: Included in the set is a practical sliding rail socket holder, helping you maintain a tidy and easily accessible socket arrangement.

Enhanced Grip: Knurled rings encircling the socket bodies ensure a secure hold, even when hands and sockets are covered in oil or grease, minimizing the risk of accidents.

Optimal Torque: The sockets are equipped with corner radii for superior torque distribution, safeguarding fasteners from damage and ensuring efficient performance.

High-Quality Material: Crafted from robust chrome vanadium steel (CR-V), these sockets offer superior wear resistance and toughness compared to high-speed steel, guaranteeing durability and extended lifespan.

Satin Chrome Finish: Not only do the sockets feature an attractive satin chrome finish, but they also provide excellent corrosion resistance, ensuring long-term quality.

Lifetime Replacement: Supported by our lifetime replacement program, this set delivers enduring value and peace of mind, making it a wise addition to your toolkit investment.

Includes:

• 10 mm - deep and standard socket
• 12 mm - deep and standard socket
• 13 mm - deep and standard socket
• 14 mm - deep and standard socket
• 15 mm - deep and standard socket
• 16 mm - deep and standard socket
• 17 mm - deep and standard socket
• 18 mm - deep and standard socket
• 19 mm - deep and standard socket
• 21 mm - deep and standard socket
• 22 mm - deep and standard socket
• 24 mm - deep and standard socket

2-IN-1 CREEPER SEAT:

The Schwaben 2 in 1 Creeper Seat is a versatile tool designed to enhance convenience in various maintenance tasks. Easily switch from a creeper to a stool, providing flexible options for different work scenarios. As a creeper, it allows you to slide effortlessly under your vehicle, while as a stool, it offers a comfortable seating option for low-height work, reducing strain on your back and knees.

This creeper seat features a thick, padded seat with a large vinyl cushion that remains soft and supportive. The headrest ensures comfort during extended use, and the waterproof, oilproof surface makes cleaning easy. Equipped with six 360° universal casters, it moves smoothly across different surfaces. The ball-bearing casters are compression and wear-resistant, ensuring easy maneuverability.

Constructed from thickened tubular steel, the Schwaben 2-in-1 Creeper Seat supports up to 330 lbs (150 kg), providing a sturdy and reliable platform. In stool mode, the robust frame prevents deformation, rolling, or tilting, ensuring stability.

With a ground clearance of only 3 inches, this creeper seat allows access to narrow, low-clearance spaces, making it ideal for garages and repair shops. Enjoy the convenience of switching between a creeper and a stool, and experience improved comfort and efficiency in your maintenance projects.

Key Features:

• Creeper/Stool All-in-One: Easily converts from a creeper to a stool for versatile maintenance tasks.
• Heavy-Duty Construction: Supports up to 330 lbs (150 kg) with a thickened tubular steel frame; prevents deformation, rolling, or tilting in stool mode.
• Smooth Movement: Six 360° universal casters ensure smooth and flexible movement on various surfaces; ball-bearing casters are compression and wear-resistant.
• Low Ground Clearance: Only 3 inches, allowing access to narrow and low-clearance spaces, perfect for garages and repair shops.
• Comfortable Padded Seat: Thick vinyl cushion with a headrest for extended use without fatigue; waterproof and oilproof for easy cleaning.
• Enhanced Efficiency and Comfort: Reduces strain on the back and knees, making it ideal for both routine maintenance and complex repairs.

Includes:

• 1 x Creeper Rear Frame
• 1 x Creeper Middle Frame
• 1 x Creeper Headrest
• 6 x Swivel Casters
• 6 x Washers
• 4 x M8x55 Hex Head Bolts
• 4 x M8 Lock Nuts

1/2" DRIVE METRIC SOCKET SET:

The Schwaben 1/2" Drive 6 Point Socket Set comprises a dozen 1/2" metric sockets, each featuring 6-point heads specially crafted for navigating those tricky, confined spaces.

Furthermore, our LIFETIME REPLACEMENT program provides you with added assurance, ensuring enduring performance and value. Improve your toolkit with the Schwaben 1/2" Drive 6 Point Socket Set and confidently tackle any task at hand.

Features:

• Organized Storage: Included in the set is a practical sliding rail socket holder, helping you maintain a tidy and easily accessible socket arrangement.
• Enhanced Grip: Knurled rings encircling the socket bodies ensure a secure hold, even when hands and sockets are covered in oil or grease, minimizing the risk of accidents.
• Optimal Torque: The sockets are equipped with corner radii for superior torque distribution, safeguarding fasteners from damage and ensuring efficient performance.
• High-Quality Material: Crafted from robust chrome vanadium steel (CR-V), these sockets offer superior wear resistance and toughness compared to high-speed steel, guaranteeing durability and extended lifespan.
• Satin Chrome Finish: Not only do the sockets feature an attractive satin chrome finish, but they also provide excellent corrosion resistance, ensuring long-term quality.
• Lifetime Replacement: Supported by our lifetime replacement program, this set delivers enduring value and peace of mind, making it a wise addition to your toolkit investment.

Includes:

• 10 mm
• 12 mm
• 13 mm
• 14 mm
• 15 mm
• 16 mm
• 17 mm
• 18 mm
• 19 mm
• 21 mm
• 22 mm
• 24 mm

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

Enhance the allure of your E46 M3 with Turner Motorsport's Gloss Black Front Lip, meticulously crafted to complement and not overshadow the natural beauty of the car. This front lip attaches seamlessly to the bumper without modifications, offering a more complete bumper appeal and the illusion of a lower ride height. Turner's design philosophy focuses on integration, drawing inspiration from the stock bumper while setting it apart with reimagined design elements.

Designed for both track and street use, this front lip seamlessly integrates with the existing design, completing the front end and filling the open space underneath. The curvature complements the front bumper, ensuring your M3 stands out with timeless body styling.

Features & Benefits:

• Motorsport styling
• Enhanced lowered appearance
• Installation hardware included
• Crafted from UV stabilized ABS polymer
• CAD designed in-house for precision fitment
• Compatible with factory and Turner Motorsports skid plates

Installation:

• Mounts to the bumper using factory hardware, self-tapping screws, plastic-specific rivnut, and center post hardware
• Requires drilling the underside of the bumper
• Riv-nut installation tool included

High Kick Trunk Spoiler:

Transform the look of your E46 Coupe with Turner Motorsport's ABS High Kick Trunk Spoiler, providing a sporty style without the high cost of a carbon fiber spoiler. Engineered in-house using 3D laser scanning and CAD technology, this spoiler mimics the design of the carbon fiber version for similar styling, accentuating OE body lines.

Installation is a breeze with no drilling, cutting, or permanent modifications required. The lightweight, vacuum-formed gloss black ABS polymer, enhanced with UV stabilizer, ensures durability and a strong bond to the body.

Features & Specifications:

• Designed and engineered by Turner Motorsport
• 3D laser scanning and CAD technology for precision fitment
• OE body line accentuation
• Utilizes 3M double-sided tape for a strong bond
• Lightweight, vacuum-formed gloss black ABS polymer with UV stabilizer

Enhance your E46 Coupe's aesthetic appeal with Turner Motorsport's High Kick Trunk Spoiler and experience a distinctive, sporty transformation.

LOW PROFILE JACK:

Meet the Schwaben Long Low Profile - High Lift Floor Jack: A Must-Have for BMW and MINI Enthusiasts.

Experience unmatched lifting efficiency with the Schwaben Long Low Profile - High Lift Floor Jack. Engineered with BMW and MINI enthusiasts in mind, this jack boasts a unique blend of features tailored to your beloved vehicles.

Key Features:

• Swift Reach: Innovative One Pump feature ensures quick contact with most cars.
• Versatile Reach: Ultra-long arm accommodates lowered cars and high vehicles like trucks and SUVs.
• Safety Assured: Overload system prevents usage beyond its rated capacity, enhancing security.
• Precision Control: Universal joint on the handle offers precise load management.
• Seamless Positioning: Swivel saddle and rear casters enable easy jack placement.
• Vehicle Care: Soft foam sleeve on the handle safeguards your vehicle's finish.
• Protective Padding: Rubber saddle pad shields your car during lifting.
• Added Convenience: Equipped with a tool tray on the jack for lug nuts and tools.
• LIFETIME REPLACEMENT: If this jack is injured in the line of duty, it will be backed by our lifetime replacement policy!

Specifications:

• Minimum Height: 2-3/4"
• Maximum Height: 24"
• Handle Length: 49-1/4"
• Jack Body Length: 35"
• Distance to Jack Pad Center from Pivot Point: 22"
• Front Caster Dimensions: 2-1/2" diameter x 2" width
• Saddle Diameter: 4" with full saddle pad
• Max Weight Capacity: 4000 lbs.
• ANSI / ASME PALD 2009 Certified

DRAIN PAN:

Features:

• Use it for oils or coolant
• Only 125mm high!
• Rolls on 4 casters for ease of use

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

Upgrade your BMW E46 M3's exterior with the Turner Motorsport In-House designed Gloss Black ABS Diffuser. Turner Motorsport's engineers were dissatisfied with existing options, so they crafted a new, affordable solution. This direct bolt-on upgrade, mirroring the style of the Turner Carbon Diffuser, boasts a deep profile, aggressive fin design, and full-width coverage on the rear bumper. Easily installed in minutes using factory mounting locations, this exclusive design promises to turn heads and make a bold statement. Stand out with the Turner ABS Diffuser and enhance your BMW's aesthetic.

• Curvature designed around E46 M3 body lines
• In-house design using 3D laser scanning and CAD technology for precision fitment
• Mounts to existing bumper insert locations with OE hardware
• Lightweight, vacuum-formed ABS polymer in UV-stabilized gloss black
• Mimics lower bumper section and OE diffuser lines for accentuating OEM features

E46 M3 Gloss Black ABS High Kick Rear Spoiler

Elevate the appearance of your E46 Coupe with the Turner Motorsport ABS High Kick Trunk Spoiler. Crafted to enhance style while considering budget constraints, this spoiler transforms your vehicle without the high cost of a carbon fiber equivalent. Made from impact and UV-resistant ABS plastic, this light and durable spoiler offers a sporty look that sets your vehicle apart. Installation is a breeze with no drilling or cutting; simply use the pre-mounted double-sided adhesive strips provided. Clean the trunk surface, apply the tape, align, and press down for a secure fit.

• Designed and engineered by Turner Motorsport in-house using 3D laser scanning and CAD technology
• Mimics the design of the carbon fiber version for similar styling
• Accentuates OE body lines along the outer edge of the spoiler
• Uses 3M double-sided tape for a strong bond to the body
• Lightweight, vacuum-formed gloss black ABS polymer with UV stabilizer

Since getting their start in 1981, Active Autowerke has earned a well-respected reputation in the BMW community for engineering high-quality power solutions for popular BMW models. This supercharger kit will produce 525 horsepower and 335 ft.lbs. of torque on your BMW, while retaining platform integrity and daily driveability. Unique to the design of the Rotrex supercharger is the traction drive system, which eliminates the lag often found in other centrifugal supercharger setups. Power delivery is smooth and dependable, and 100% reversible to stock if you so choose, since each system is designed as a self-contained unit.

Kit features:

• Rotrex 92 trim supercharger running 7 PSI of boost
• Supercharger bracket, pulleys, & belt
• Self-contained oiling system with front-mount oil cooler
• 6 high-flow fuel injectors
• Colder heat range spark plugs
• Active Autowerke  Generation 7 intake manifold with dual bypass valve
• Front mount air-to-air intercooler
• Active Autowerke air filter
• Active Autowerke dyno-tuned software
• All mounting hardware, plumbing, hoses, & clamps
• Illustrated instruction manual & installation guide
• 2 year warranty with free tech support

Performance Specs:

• Power   :   525 BHP @ 7650 rpm
• Torque   :   335 ft/lbs @ 5400 rpm
• Boost Level   :   7-8 psi

ECS Performance Clutch and Flywheel Kit – Built for Precision and Power

Step up your BMW’s driving experience with the ECS Performance Clutch and Flywheel Kit, engineered for drivers who demand improved throttle response, stronger engagement, and seamless power delivery. Featuring a modified E34 M5 clutch setup paired with an expertly crafted single-mass flywheel, this kit is designed to enhance both the feel and performance of M5x and S5x engines with 5-speed transmissions.

The single-mass flywheel replaces the bulky, factory dual-mass version, significantly reducing rotational weight for quicker throttle response and sharper acceleration. This kit retains the robustness of the M5 clutch but ups the ante with a reinforced pressure plate and clutch disc, giving you not only increased power handling but also a highly responsive pedal feel for precision control.

Perfect for both clutch replacements and power upgrades, the ECS Performance Clutch and Flywheel Kit transforms your driving experience without sacrificing pedal feel or adding unwanted stiffness. Say goodbye to spongy or overly rigid aftermarket options—this setup strikes the balance that enthusiasts crave, giving you both reliability and satisfaction behind the wheel.

Kit Contents:

Single Mass Flywheel with E34 M5 Clutch Geometry Upgraded Clutch Disc and Pressure Plate Throw-out Bearing and Pilot Bearing Clutch Alignment Tool Flywheel and Pressure Plate Bolts Clutch Highlights:

Torque Capacity: 375 ft-lbs at the crank 240mm Performance Clutch Disc: Organic friction material with copper for heat dissipation and durability OE-Like Backing Plate: Provides smooth engagement and reduced driveline chatter Reinforced Pressure Plate: Holds 1,729 lbs of pressure for a firm, predictable pedal Flywheel Highlights:

Single-Mass Construction: Replaces the heavy factory dual-mass flywheel 4140 Chromoly Steel: Lightweight yet robust (16.5 lbs vs. factory 25.3 lbs) Enhanced Response and Acceleration SFI Certified Developed with Precision: Engineered and quality-tested by ECS Tuning in our Ohio facility, this kit reflects the best in performance engineering. Utilizing advanced tools like FARO laser scanning and 3D CAD modeling, we ensure precision fitment, durability, and consistent results for every driver.

Polyurethane Transmission Mount Set - Street Performance

Your transmission mounts are the backbone of your drivetrain. Stock rubber mounts often degrade quickly, leading to excess movement, mis-shifts, and, in some cases, even chassis damage. ECS Tuning’s Street Performance Polyurethane Transmission Mount Set offers an upgraded solution built for street and track performance alike.

Constructed from high-quality polyurethane and 304 stainless steel, these mounts are crafted to withstand the demands of high-torque and forced-induction setups, minimizing deflection and giving you more direct power delivery. With a 70A durometer rating, these mounts offer the best of both worlds—stiff enough to handle aggressive driving but still comfortable for daily commutes. For track-focused builds, we also offer a stiffer 80A version (sold separately).

Key Features:

Improved Stability: Reduced transmission movement for fewer mis-shifts and over-revs Polyurethane Construction: Stronger than rubber, with excellent oil and water resistance Engaging Driving Experience: A more connected feel without excessive vibration Dual Options: Choose Street (70A) or Race (80A) to match your driving style Durable Design: Mechanical interlock feature for high-stress applications Pair your new clutch and flywheel kit with these premium mounts for an unparalleled driving experience. Plus, our DIY guide makes installation easy—ECS Tuning has you covered from start to finish!

Take your BMW’s cooling system to the next level with this Turner Motorsport Cooling Upgrade Kit. Featuring a Heavy-Duty Aluminum Expansion Tank and a Mechanical Thermostat Conversion Kit, this combo is engineered to deliver ultimate reliability and superior performance for M52TU/M54 engines. Say goodbye to the cooling system failures common in stock setups—Turner Motorsport has you covered.

Turner Motorsport M52TU/M54 Heavy-Duty Expansion Tank Kit

The Turner Motorsport Aluminum Expansion Tank is a premium upgrade designed to replace the fragile factory plastic tank, which is known to crack, leak, or even explode. Crafted for durability, this tank’s all-aluminum construction with wrinkle black powder coating ensures this is the last expansion tank you’ll ever need.

Why Upgrade? The factory plastic tanks on BMW M52TU/M54 engines are notorious for failure under heat and pressure. Avoid the risk of being stranded on the side of the road with a mess of coolant—Turner Motorsport’s aluminum expansion tank is built to withstand years of demanding use and intense heat cycles.

Key Features and Benefits:

Complete Kit: Includes Turner Aluminum Expansion Tank, coolant level sensor, expansion tank cap, and flared coolant pressure release line. OEM Fit & Capacity: Direct fit with no modifications, maintains stock coolant capacity and expansion volume. Baffled Design: Prevents air pockets during aggressive driving and ensures accurate coolant level readings. Premium Construction: TIG-welded 5052 aluminum with machined fittings for factory hose compatibility. Turner Motorsport M52TU/M54 Mechanical Thermostat Conversion Kit

Replace your problematic factory plastic thermostat housing with Turner Motorsport’s high-quality billet aluminum Thermostat Conversion Kit. This upgrade not only provides increased reliability but also allows for thermostat swaps to suit specific temperature requirements, making it ideal for daily drivers and track cars alike.

Why Make the Switch? The factory plastic thermostat housing with its built-in thermostat is prone to cracking and requires the whole unit to be replaced during maintenance. Turner’s conversion kit changes the game by providing a durable billet housing with a replaceable thermostat for flexibility and lower maintenance costs.

Key Features and Benefits:

Increased Reliability: Uses an M50/S50 mechanical thermostat, including an 80°C thermostat for enhanced cooling control. Customizable: Includes barbed hose connections for standard E46 M3 hoses and -16 ORB connections for custom hoses. Engineered to Last: CNC-machined from billet 6061 aluminum and black anodized for corrosion resistance. Enhanced Sealing: Features a Viton gasket for superior durability and sealing performance. Kit Includes:

6061 Billet Aluminum Thermostat Housing 80°C Mechanical Thermostat Thermostat Housing Gasket Thermostat Harness ECS Silicone E46 M3 Cooling Hoses Turner Motorsport Precision Engineering & Product Development

Every component in this cooling upgrade kit has been rigorously designed, engineered, and tested by Turner Motorsport’s Research and Development team. Using state-of-the-art technology such as FARO laser scanning, SolidWorks 3D modeling, and in-house rapid prototyping, Turner ensures that these products meet the highest standards of quality, precision, and durability.

Upgrade your BMW with confidence—Turner Motorsport is your partner in performance and reliability.

BRAKE CALIPER PISTON TOOL SET:

The Schwaben 18-piece disk brake retractor tool kit screws brake caliper pistons back into their bores to make room needed for new brake pads. An essential tool for working on calipers with threaded pistons, the kit comes with both right-hand and left-hand thread screw jacks, press plate, and 15 different diameter press disks to fit a wide variety of vehicles, both import and domestic, including Audi, BMW, Ford, GM, Honda, Mazda, Mitsubishi, Subaru, Toyota, Volkswagen and others.

Made of 100 percent chromalloy steel for strength, durability, and long service life.

PROTECTA SOCKET SET:

Protecta socket are used to keep ugly scratch marks from showing up after torqueing down wheel lugs.

Features:

• Coated six-point deep-well impact sockets 
• Color coded mar-free exterior coatings that prevent nicks and scratches left by plain metal sockets
• 17mm, 19mm and 21mm Sockets included

Use these with your breaker bar or impact gun to remove the tightest wheel bolts and lug nuts: when reinstalling wheels, use them to final torque wheel fasteners to factory specifications.

Combine these with our torque limiting sockets and the Schwaben ½-inch torque wrench for a complete wheel fastener solution.

CALIPER HOOK SET:

• Tired of messing with bent coat hangers or bungee cords to hang your calipers up and out of the way when performing brake maintenance? These hooks make working on your brakes easier by letting you hang your calipers with ease, no more fighting with the bungee cords or zip ties to hold the caliper just right or having to make your own "custom" hooks with wire.
• Holds brake calipers out of the way while working on brakes
• Also use to hang other automotive parts and tools while working on your vehicle.
• Stronger than zip ties or wire.
• Save the brake hose by not hanging caliper by hose.
• Made of  thick steel for strength and durability. length is 8"

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

Elevate your lifting experience with the Schwaben Long Low Profile - High Lift Floor Jack. Certified for excellence and designed with a keen understanding of European car enthusiasts' needs, this jack is a testament to precision, durability, and performance. Don't compromise on quality—choose the Schwaben advantage for all your lifting endeavors.

Designed with precision, crafted for performance, and backed by our lifetime replacement program, the Schwaben Long Low Profile - High Lift Floor Jack is a must-have tool for every European car aficionado. This jack is engineered to cater to the unique needs of low ground clearance vehicles, ensuring that your prized possessions are lifted with care and precision.

Key Features:

• One Pump Reach: With its innovative one-pump feature, this floor jack effortlessly reaches contact on most cars, streamlining your lifting process.
• Low Profile Advantage: Boasting a mere 2-3/4" low height and a deep-reach lift arm, this jack is tailored for those sports cars and luxury vehicles that ride close to the ground.
• Hydraulic System Protection: The dual pump pistons are expertly shielded to thwart contaminants from compromising the hydraulic system's integrity.
• Built for Durability: Crafted with heavy gauge construction and fortified with rolled edges, this floor jack guarantees unwavering strength and longevity.
• Precise Control: The U-Joint release mechanism offers meticulous control over load descent at any handle position, ensuring the safety of both you and your vehicle.
• Maneuverability Redefined: Upgraded casters allow seamless maneuverability and effortless positioning of the jack, empowering you to find that perfect lifting spot.
• Safety First: The internal by-pass valve prevents over-pumping, shielding the hydraulic system from stress-induced issues.
• Vehicle Protection: A full cover rubber saddle pad and a protective foam cover on the handle are in place to prevent any unintended damage during the lifting process.
• Impressive Capacity: With a remarkable 4000 lb. capacity, this jack is ready to tackle a range of European vehicles.
• LIFETIME REPLACEMENT: Like almost all Schwaben products, this jack is backed by our lifetime replacement program in case anything goes wrong!

Specifications:

• Min Height: 2-3/4"
• Max Height: 24"
• Handle Length: 49-1/4"
• Jack Body Length: 35"
• Length from Pivot Point to Center of Jack Pad: 22"
• Front Casters: 2-1/2" diameter x 2" width
• Saddle Diameter: 4" with full saddle pad
• Weight Capacity: 4000 lbs.
• ANSI / ASME PALD 2009 Certified

Also included are the Schwaben Aluminum 3-Ton Jack Stands. These ultra-light Schwaben jack stands only weigh 4.7 lbs each. Fit and finish on these stands show how much pride in workmanship goes into our stands. These stands feature all-aluminum construction with heavy-duty flanged bases to safely stabilize loads. Features 6 locking positions for a secure load in multiple heights. The load pin is extra heavy duty at .584 in. diameter and features a posi lock ball to ensure the pin stays in place.  

• Min. Height is 10.6".
• Max Height is 15.4".
• Large 7" diameter base.
• Outer support tube is 2-1/8" in diameter.

For replacement parts, please call us and ask for:

• ES#4430428 - Replacement Screw Set
• ES#4430429 - Replacement Front Wheel
• ES#4430430 - Replacement Caster Wheel

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

WRENCH SET:

Quality combination wrenches are a must when doing any kind of automotive work.

Features:

• A complete set from 8 to 19 mm 
• Professional quality wrenches in full length feature open end on one end and 12 pt box on the other
• Satin finish provides superior feel, slip resistant grip, easy cleanup and inhibits rust
• Includes sturdy wrench holder for easy storage

INDEXING PRY BAR SET:

Having an adjustable pry bar really comes in handy when working in tight spaces as well as making seal replacement much easier.

Features:

• Three hardened alloy metal bars in 10, 12, and 15 inch lengths, with knurled, non-slip handle grips.
• Push button release at pry bar pivot allows the pry head to rotate through a wide arc and lock in place again when the button is released.
• Packaged in a handy molded case for portability and easy organization.

100 PIECE BIT SET:

All the right bits in one box. The perfect assortment to keep the job going.

Features:

• 10 fractional SAE hex, 9 Torx® tamper-proof, 9 Torx®
• 9 Metric hex bits, 9 slotted bits, 8 Pozi-drive, 8 Phillips, 4 square-recess, 4 tri-wing
• 3 spline, 3 Torq, 3 clutch, wing-nut driver, magnetic bit holder and socket bit holder
• Made of hardened Chrome Vanadium steel for years of dependable use
• Packaged in a handy blow molded case with individually marked bit slots for easy organization

6 PIECE SCREWDRIVER SET:

The Schwaben 6-Piece Screwdriver Set consistently proves its worth over time, delivering exceptional performance across a multitude of tasks. Forged from the unyielding strength of nickel chrome moly, these tools are purpose-built to endure the challenges of consistent use, standing as unwavering companions for a wide spectrum of tasks. Our dedication to your satisfaction is solidified through our LIFETIME REPLACEMENT program, a testament to our promise of keeping this set at your side for as long as you need.

Features:

• Seamless Color Coding: Effortlessly transition between flat head and Philips head screwdrivers with the intuitive color-coded system. Enhance efficiency and eliminate any guesswork.
• Optimal Handling Comfort: Engage in tireless operation with ergonomically designed handles that offer both comfort and precision, especially for intricate tasks.
• Organized Storage: Tucked within a molded tray, these frequently used screwdriver sizes are incredibly portable and thoughtfully arranged, eliminating the frustration of rummaging through tool collections.
• Essential Variety: Painstakingly curated to cater to diverse needs, the set comprises a range of sizes suited for delicate assignments and robust ventures alike, effectively tending to all your requirements.

Includes:

• Molded Tray
• 5.5x100mm flat head screwdriver
• 6.5x150mm flat head screwdriver
• 8x175mm flat head screwdriver
• #1x75mm Phillips screwdriver
• #2x100mm Phillips screwdriver
• #3x150mm Phillips screwdriver

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

1/4" DRIVE METRIC SHALLOW SOCKET SET - 13 PC:

The Schwaben 1/4" Drive 6 Point Socket Set is comprised of thirteen 1/4" metric sockets, each featuring 6-point heads specially crafted for navigating those tricky, confined spaces.

Furthermore, our LIFETIME REPLACEMENT program provides you with added assurance, ensuring enduring performance and value. Improve your toolkit with the Schwaben 1/4" Drive 6 Point Socket Set and confidently tackle any task at hand.

Features:

• Organized Storage: Included in the set is a practical sliding rail socket holder, helping you maintain a tidy and easily accessible socket arrangement.
• Enhanced Grip: Knurled rings encircling the socket bodies ensure a secure hold, even when hands and sockets are covered in oil or grease, minimizing the risk of accidents.
• Optimal Torque: The sockets are equipped with corner radii for superior torque distribution, safeguarding fasteners from damage and ensuring efficient performance.
• High-Quality Material: Crafted from robust chrome vanadium steel (CR-V), these sockets offer superior wear resistance and toughness compared to high-speed steel, guaranteeing durability and extended lifespan.
• Satin Chrome Finish: Not only do the sockets feature an attractive satin chrome finish, but they also provide excellent corrosion resistance, ensuring long-term quality.
• Lifetime Replacement: Supported by our lifetime replacement program, this set delivers enduring value and peace of mind, making it a wise addition to your toolkit investment.

Includes:

• 4 mm
• 4.5 mm
• 5 mm
• 5.5 mm
• 6 mm
• 7 mm
• 8 mm
• 9 mm
• 10 mm
• 11 mm
• 12 mm
• 13 mm
• 14 mm

3/8" DRIVE METRIC SHALLOW SOCKET SET - 12 PC:

A satin chrome finish with a knurled ring around socket body, the knurling allows for a better grip when hands and sockets are covered in oil or grease. All sockets feature a radius in the corners for superior torque to the sides of the fastener, not the corner. Complete size coverage.

Includes:

• 8mm
• 9mm
• 10mm
• 11mm
• 12mm
• 13mm
• 14mm
• 15mm
• 16mm
• 17mm
• 18mm
• 19mm

LIFETIME REPLACEMENT

1/2" DRIVE METRIC SHALLOW SOCKET SET - 12 PC:

The Schwaben 1/2" Drive 6 Point Socket Set comprises a dozen 1/2" metric sockets, each featuring 6-point heads specially crafted for navigating those tricky, confined spaces.

Furthermore, our LIFETIME REPLACEMENT program provides you with added assurance, ensuring enduring performance and value. Improve your toolkit with the Schwaben 1/2" Drive 6 Point Socket Set and confidently tackle any task at hand.

Features:

• Organized Storage: Included in the set is a practical sliding rail socket holder, helping you maintain a tidy and easily accessible socket arrangement.
• Enhanced Grip: Knurled rings encircling the socket bodies ensure a secure hold, even when hands and sockets are covered in oil or grease, minimizing the risk of accidents.
• Optimal Torque: The sockets are equipped with corner radii for superior torque distribution, safeguarding fasteners from damage and ensuring efficient performance.
• High-Quality Material: Crafted from robust chrome vanadium steel (CR-V), these sockets offer superior wear resistance and toughness compared to high-speed steel, guaranteeing durability and extended lifespan.
• Satin Chrome Finish: Not only do the sockets feature an attractive satin chrome finish, but they also provide excellent corrosion resistance, ensuring long-term quality.
• Lifetime Replacement: Supported by our lifetime replacement program, this set delivers enduring value and peace of mind, making it a wise addition to your toolkit investment.

Includes:

• 10 mm
• 12 mm
• 13 mm
• 14 mm
• 15 mm
• 16 mm
• 17 mm
• 18 mm
• 19 mm
• 21 mm
• 22 mm
• 24 mm

1/4" DRIVE METRIC DEEP SOCKET SET - 13 PC:

The Schwaben 1/4" Drive 6 Point Deep Socket Set is comprised of thirteen 1/4" deep metric sockets, each featuring 6-point heads specially crafted for navigating those tricky, confined spaces. With a length of 50mm, these sockets ensure you can reach critical areas with ease.

Furthermore, our LIFETIME REPLACEMENT program provides you with added assurance, ensuring enduring performance and value. Improve your toolkit with the Schwaben 1/4" Drive 6 Point Deep Socket Set and confidently tackle any task at hand.

Features:

• Access Tight Spaces: These deep sockets, measuring 50mm in length, are expertly designed to reach challenging, confined areas, making them perfect for intricate tasks.
• Organized Storage: Included in the set is a practical sliding rail socket holder, helping you maintain a tidy and easily accessible socket arrangement.
• Enhanced Grip: Knurled rings encircling the socket bodies ensure a secure hold, even when hands and sockets are covered in oil or grease, minimizing the risk of accidents.
• Optimal Torque: The sockets are equipped with corner radii for superior torque distribution, safeguarding fasteners from damage and ensuring efficient performance.
• High-Quality Material: Crafted from robust chrome vanadium steel (CR-V), these sockets offer superior wear resistance and toughness compared to high-speed steel, guaranteeing durability and extended lifespan.
• Satin Chrome Finish: Not only do the sockets feature an attractive satin chrome finish, but they also provide excellent corrosion resistance, ensuring long-term quality.
• Lifetime Replacement: Supported by our lifetime replacement program, this set delivers enduring value and peace of mind, making it a wise addition to your toolkit investment.

Includes:

• 4 mm
• 4.5 mm
• 5 mm
• 5.5 mm
• 6 mm
• 7 mm
• 8 mm
• 9 mm
• 10 mm
• 11 mm
• 12 mm
• 13 mm
• 14 mm

3/8" DRIVE METRIC DEEP SOCKET SET - 12 PC:

The Schwaben 3/8" Drive 6 Point Deep Socket Set comprises a dozen 3/8" deep metric sockets, each featuring 6-point heads specially crafted for navigating those tricky, confined spaces. With a length of 63mm, these sockets ensure you can reach critical areas with ease.

Furthermore, our LIFETIME REPLACEMENT program provides you with added assurance, ensuring enduring performance and value. Improve your toolkit with the Schwaben 3/8" Drive 6 Point Deep Socket Set and confidently tackle any task at hand.

Features:

• Access Tight Spaces: These deep sockets, measuring 63mm in length, are expertly designed to reach challenging, confined areas, making them perfect for intricate tasks.
• Organized Storage: Included in the set is a practical sliding rail socket holder, helping you maintain a tidy and easily accessible socket arrangement.
• Enhanced Grip: Knurled rings encircling the socket bodies ensure a secure hold, even when hands and sockets are covered in oil or grease, minimizing the risk of accidents.
• Optimal Torque: The sockets are equipped with corner radii for superior torque distribution, safeguarding fasteners from damage and ensuring efficient performance.
• High-Quality Material: Crafted from robust chrome vanadium steel (CR-V), these sockets offer superior wear resistance and toughness compared to high-speed steel, guaranteeing durability and extended lifespan.
• Satin Chrome Finish: Not only do the sockets feature an attractive satin chrome finish, but they also provide excellent corrosion resistance, ensuring long-term quality.
• Lifetime Replacement: Supported by our lifetime replacement program, this set delivers enduring value and peace of mind, making it a wise addition to your toolkit investment.

Includes:

• 8 mm
• 9 mm
• 10 mm
• 11 mm
• 12 mm
• 13 mm
• 14 mm
• 15 mm
• 16 mm
• 17 mm
• 18 mm
• 19 mm

1/2" DRIVE METRIC DEEP SOCKET SET - 12 PC:

The Schwaben 1/2" Drive 6 Point Deep Socket Set comprises a dozen 1/2" deep metric sockets, each featuring 6-point heads specially crafted for navigating those tricky, confined spaces. With a length of 76mm, these sockets ensure you can reach critical areas with ease.

Furthermore, our LIFETIME REPLACEMENT program provides you with added assurance, ensuring enduring performance and value. Improve your toolkit with the Schwaben 1/2" Drive 6 Point Deep Socket Set and confidently tackle any task at hand.

Features:

• Access Tight Spaces: These deep sockets, measuring 76mm in length, are expertly designed to reach challenging, confined areas, making them perfect for intricate tasks.
• Organized Storage: Included in the set is a practical sliding rail socket holder, helping you maintain a tidy and easily accessible socket arrangement.
• Enhanced Grip: Knurled rings encircling the socket bodies ensure a secure hold, even when hands and sockets are covered in oil or grease, minimizing the risk of accidents.
• Optimal Torque: The sockets are equipped with corner radii for superior torque distribution, safeguarding fasteners from damage and ensuring efficient performance.
• High-Quality Material: Crafted from robust chrome vanadium steel (CR-V), these sockets offer superior wear resistance and toughness compared to high-speed steel, guaranteeing durability and extended lifespan.
• Satin Chrome Finish: Not only do the sockets feature an attractive satin chrome finish, but they also provide excellent corrosion resistance, ensuring long-term quality.
• Lifetime Replacement: Supported by our lifetime replacement program, this set delivers enduring value and peace of mind, making it a wise addition to your toolkit investment.

Includes:

• 10 mm
• 12 mm
• 13 mm
• 14 mm
• 15 mm
• 16 mm
• 17 mm
• 18 mm
• 19 mm
• 21 mm
• 22 mm
• 24 mm

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

COMBINATION WRENCH SET:

Quality combination wrenches are a must when doing any kind of automotive work.

Features:

• A complete set from 8 to 19 mm 
• Professional quality wrenches in full length feature open end on one end and 12 pt box on the other
• Satin finish provides superior feel, slip resistant grip, easy cleanup and inhibits rust
• Includes sturdy wrench holder for easy storage

SCRAPER, HOOK, AND PICK SET:

Some of the most popular uses are carbon cleaning/scraping, picking out o-rings, snap rings and clips. This kit features large and small picks, hooks and a 1" wide scraper. This 9pc set should be part of everyone's tool assortment.

Features:

• 3" Blade MINI Awl, 90°, Hook, and Curve
• 6" Blade Awl, 90°, Hook, and Curve
• 6" x 1" wide scraper

Everything in this kit comes with LIFETIME REPLACEMENT.

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

Since getting their start in 1981, Active Autowerke has earned a well-respected reputation in the BMW community for engineering high-quality power solutions for popular BMW models. This supercharger kit will produce 425 horsepower and 295 ft.lbs. of torque on your BMW, while retaining platform integrity and daily driveability. Unique to the design of the Rotrex supercharger is the traction drive system, which eliminates the lag often found in other centrifugal supercharger setups. Power delivery is smooth and dependable, and 100% reversible to stock if you so choose, since each system is designed as a self-contained unit. best of all, when you crave more power, this kit is fully upgradeable to Level 1 and Level 2 specs.

Kit features:

• Rotrex C38-92 trim supercharger running 5.8 PSI of boost
• Active Autowerke GEN 7 intake manifold
• Active Autowere dual blow-off valve setup
• Active Autowerke Air Filter
• Alpha N software tune w/ SIMON2 interface
• 6 high-flow fuel injectors
• Dedicated oil cooling system
• All mounting hardware, plumbing, hoses, & clamps
• Illustrated instruction manual & installation guide
• 2 year warranty with free tech support

Base Prima supercharger Dynojet results:
Boost: 5.8 psi
Stock Horsepower:  285.4 WHP @ 7500 RPM
Stock Torque: 232.36 LB-FT @ 5250 RPM
Supercharged Horsepower: 426.69 WHP @ 8150 RPM
Supercharged Torque: 297.99 LB-FT @ 7200 RPM

Upgrade the whole driving experience of your car with a single mass clutch and flywheel conversation paired with new upgraded engine and transmission mounts. These street durometer mounts are 70 and 75 durometer for an improved but not too harsh driving experience. This clutch and flywheel upgrade features a slightly heavier pedal feel with smooth engagement, paired with your upgraded drivetrain mounts you are sure to have confidence in how sturdy your car drives!

Our performance clutch and flywheel kit utilizes an upgraded ECS E34 M5 clutch kit with our in-house engineered flywheel to fit all M5x and S5x motors with a 5-speed transmission. By eliminating the dual-mass flywheel and replacing it with a single-mass we are able to eliminate the slack and extra weight of the flywheel for a quicker throttle response and acceleration. Our upgraded clutch kit utilizes all the best features of the original M5 clutch with an upgraded pressure plate and clutch disc, with the new clutch you have a better, more engaged clutch pedal feel, engagement, and longevity.

Whether you're replacing a worn-out clutch or upgrading for increased power handling, this E34 M5 clutch and flywheel kit offers a reliable solution for enhanced pedal feel, power capacity, and overall driving satisfaction.

Paired with a modified geometry flywheel, the E34 M5 style clutch is ideally suited for most E36, E46, and others using the same powertrain. It checks all the boxes for essential clutch replacement features. While some aftermarket options may address slipping issues and worn-out clutches, they often sacrifice pedal feel, providing little to no resistance. A soft clutch not only kills the driving experience of your BMW but also reduces confidence when pushing the car to its limits.

On the contrary, you might be in the market for an upgraded clutch to handle your modified engine/forced induction builds. You go from an OE or aftermarket clutch option that has a lackluster and soft pedal feel to the complete opposite side of the spectrum, a very stiff clutch that grabs like an on-and-off switch making the clutch a pain almost undrivable on the street resulting in your favorite car turning into your least favorite car to drive.

The E34 M5 clutch and flywheel kit balances performance with practicality, ensuring a satisfying driving experience whether you're maintaining your BMW or preparing it for increased power demands.

Kit Contents:

Single Mass Flywheel - E34 M5 Clutch Geometry Performance Clutch Disc and Pressure plate Throw-out Bearing Pilot Bearing Clutch Alignment Tool Flywheel Bolts - Qty 8 Pressure Plate Botls - Qty 6 Clutch features:

Torque Capacity (Crankshaft): 375 Ft / Lbs Clutch Disc: 240mm Full face, performance organic friction material with integrated copper for enhanced heat dissipation and a long component life OE-like friction backing plate design for smooth engagement with dual-stage damping springs to reduce gear noise and driveline chatter, and for smooth engagement Pressure Plate Increased clamp force over OEM, rated at 1,729lbs of pressure Flywheel features:

Eliminates factory dual mass Improved throttle response Improved acceleration Hardened 4140 Chromoly Steel Designed for use with any E34 M5 pressure plate and clutch for OE-type clutch feel Weighs in at just 16.5lbs vs Factory Dual Mass - 25.3 lbs SFI certified Polyurethane Transmission Mount Set - Street

70A durometer rating - slightly stiffer than stock for improved shifting quality and driveline performance. Constructed of 304 stainless steel with bonded and constrained polyurethane. The transmission mounts in your car play a critical role in your suspension. With this in mind, the stock mounts have been known to experience failures causing over-revving, mis-shifts, and in extreme cases, even chassis damage. Combat this issue with upgraded polyurethane transmission mounts from ECS Tuning. Designed with the street and track in mind, we've got you covered no matter your driving style. Fears of torn mounts are a thing of the past; a mechanical interlock feature makes these mounts ideal even for high-torque, forced-induction applications. Engine Mounts - 75A Durometer

Keep your engine securely mounted with our solid, non-fluid-filled mounts. Our ECS 75A Durometer engine mounts are custom-made in-house by our leading R&D department. These mounts result from countless hours of research and testing to establish the best possible bushing design to minimize engine vibration and driveline deflection while maximizing strength. ECS Tuning's primary goal was to achieve an economical, durable & compliant ride while maximizing performance. After putting down thousands of real-world test miles on multiple vehicles, we've done just that. With exposure to heat and elements, your motor mounts will break down with increasing age. A secure mount* is vital to reduce drivetrain vibration and transfer as much horsepower to the wheels as possible. These mounts are an upgrade for non-M E36/E46 owners seeking a stiffer mount without sacrificing comfort and ride quality.

TURNER E46 325i VALVED CAT-BACK EXHAUST

When you're choosing an exhaust, you shouldn’t have to compromise between spirited performance and neighborhood-friendly volume. The Turner Valved Cat-Back Exhaust delivers the best of both worlds: tame when you want it, rowdy when you don’t! Lightweight, performance-driven, and specifically designed for your E46, this exhaust offers instant control over your car’s sound and power output.

With a simple press of a button, the exhaust valves adjust to match your mood or driving environment. Keep them closed for a deep, resonant tone or open them wide for full-throttle power and exhilarating sound. Engineered to withstand high performance and everyday driving, this exhaust will elevate your BMW experience.

Key Features:

Dual 2.0" Stainless Steel Mid-Pipes: Smooth airflow for reduced back pressure, connecting seamlessly to factory downpipes. Integrated X-Pipe: Reduces back pressure and improves exhaust tone. Full 3" Valved Muffler: Delivers aggressive sound when open; quiet and refined when closed. Integrated 3" Tips: Perfectly fill the rear diffuser with a polished finish. Lightweight Design: 23 lb weight reduction over factory exhaust. Complete Kit Includes:

2.0" Mid-section with X-pipe integration 3" Valved Muffler and integrated tips Exhaust valve control kit with two remote key fobs Gaskets, clamps, and complete mounting hardware Installation instructions available in the installation tab. ECS E46 325 LUFT-TECHNIK INTAKE SYSTEM

Take your driving experience up a notch with the ECS Luft-Technik Intake System! Designed to increase airflow and unlock captivating induction sounds, this intake system frees your engine from the restrictive stock intake box. Enjoy a noticeable boost in both performance and sound.

Benefits:

Significant Airflow Increase: 71 CFM gain over stock (27% increase). Enhanced Induction Noise: Adds a sporty, satisfying sound. Seamless Factory Integration: Retains stock MAF location and mounts to existing air induction track. Premium Design:

Wrinkle-Black Powder Coated Aluminum Tubing: Engineered from durable 6061 and 5052 aluminum. 7” Oiled Cotton Gauze Filter: Red filter maximizes air intake. Silicone Inlet Boot: Replaces failure-prone factory intake boot, providing smoother airflow and greater durability. Complete Kit Includes:

7” Oiled Filter (Red) Silicone Inlet Boot with improved flow characteristics Aluminum MAF Flange Mounting brackets, clamps, and all necessary hardware Turner Motorsport and ECS Tuning developed these products with precision, using FARO ARM laser scanning technology and CAD modeling for perfect fitment. Elevate your E46 with this exclusive package, and experience a total transformation in performance and sound!