BMW Maintenance & Tune-Up Parts for BMW 3 Series E46 (1999-2005)

Replacing your wiper blades every few months is important to ensure you always have the best road clarity possible. Bosch wiper blades will offer great life-span and will remain streak free longer than most other brands.

Bosch is one of the largest OEM producers of Genuine BMW and aftermarket parts in the world, providing parts for almost every major automotive manufacturer. Bosch has likely supplied many of the original electrical (and mechanical) parts for your BMW. Thanks to their quality, high durability, and reliability, you should expect a long service life from Bosch products.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Our Performance CSL Air Filters start with a multi-layer oiled cotton construction that contains millions of smaller fibers to provide superior filtration and performance over the OEM filter. Precisely manufactured for a secure fitment to ensure all the air entering your motor is properly filtered. With the CSL E46 only being offered in Europe, the OEM air filters are produced in much lower quantities making them harder to obtain and drive up the price. Turners solution is a price effective solution that offers premium filtration with increased flow, extended service interval and lifespan.

Having a clean air filter ensures your engine is running at its best efficiency! Proper air flow will help your engine breathe, get the best fuel economy and allow full power throughout the power band. Get the most out of your CSL intake with a new Oiled High Flow Air Filter. These filters can be cleaned, oiled and reused for an extended service life.

Oiled versus Dry Filters:

Although both options will keep the air to your engine clean and improve airflow, there are a few differences to consider when choosing the best filter for you. Oiled filters allow better airflow than dry filters, however they require more maintenance. Oiled filters will likely get dirty faster, needing to be cleaned more regularly. When cleaning an oiled filter, it is necessary to oil them with filter oil afterwards.
Dry filters offer slightly lower airflow but are easier to maintain while still out performing the OE paper filter. Dry filters can be washed with warm soapy water. There is no oiling necessary afterwards.
Both dry and oiled filters flow better than stock and can be reused.
Product Features:

Direct Replacement for OEM filter
Increased air flow
Lower cost
Serviceable
Readily available
How to service an oiled air filter:

Take out your High Flow Filter
Gently tap your air filter on a smooth surface
Wash with warm soapy water a a soft bristled brush
Rinse with low pressure water
Let the filter air dry
Apply new filter oil
Ready to reinstall for a fresh drive!

Enhance your BMW's performance with the upgraded BAV Ignition Coil, designed to boost firepower and optimize engine efficiency. These coils boast modified core windings for a faster, more efficient burn, resulting in increased torque at lower RPMs and heightened horsepower in the upper range. While improvements depend on your engine's condition, these coils ensure noticeable enhancements in performance and potential fuel economy benefits.

Product Benefits:

Improved engine firepower and efficiency
Increased torque at lower RPMs
Enhanced horsepower in higher ranges
Potential improvement in fuel economy
Set of six for complete BMW Cooper replacement

Replacing your wiper blades every few months is important to ensure you always have the best road clarity possible. Bosch wiper blades will offer great life-span and will remain streak free longer than most other brands.

Bosch is one of the largest OEM producers of Genuine BMW and aftermarket parts in the world, providing parts for almost every major automotive manufacturer. Bosch has likely supplied many of the original electrical (and mechanical) parts for your BMW. Thanks to their quality, high durability, and reliability, you should expect a long service life from Bosch products.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Enhance your BMW's performance with the Turner Motorsport Exact-Fit High Flow Dry Air Filter, replacing the factory air filter for optimal airflow. This reusable filter offers a higher flow than stock paper filters, instantly improving engine power and fuel economy across the power band. As a direct replacement for the OEM filter, it's a hassle-free performance modification that shows immediate results. Choose between oiled and dry filters based on your preference and maintenance preferences, with both options outperforming OE paper filters. The dry filter, in particular, requires minimal maintenance, making it a cost-effective and efficient choice.

• Enhances engine performance and fuel economy
• Higher flow than OEM paper filters
• Reusable and washable for long-term use
• Direct replacement for the OEM filter
• Choose between oiled and dry filters based on maintenance preference
• Dry filter requires minimal maintenance and no oiling
• Cleaning needed only every 50,000 miles under normal highway driving conditions
• Cost-effective alternative to regularly replacing paper filters

Be sure to check out the full line of filter cleaning supplies Turner Motorsport has to offer!

Upgrade your BMW's air filtration system with the Turner Motorsport Exact-Fit High Flow Dry Air Filter. This direct replacement for your factory air filter offers superior airflow, allowing your engine to breathe better and enhancing both power and fuel economy. Enjoy immediate performance gains with this reusable filter, which outperforms stock paper filters and requires minimal maintenance.

Key Benefits:

• Improves engine breathing for better performance
• Enhances power throughout the power band
• Increases fuel economy
• Reusable filter for long-term savings
• Easy installation as a direct OEM replacement

Oiled versus Dry Filters:

Although both options will keep the air to your engine clean and improve airflow, there are a few differences to consider when choosing the best filter for you. Oiled filters do allow slightly better airflow than dry filters, however they require more maintenance. Oiled filters will likely get dirty faster, needing to be cleaned more regularly. When cleaning an oiled filter, it is necessary to oil them with filter oil afterwards. This filter will save you money by no longer needing to replace a paper filter.

Dry filters offer slightly lower airflow but are easier to maintain while still outperforming the OE paper filter. Dry filters can be washed with warm soapy water. There is no oiling necessary afterwards.

Both dry and oiled filters flow better than stock and can be reused.

Spark Plug Replacement for Enhanced Engine Performance

Periodic replacement of spark plugs is crucial in averting common problems arising from worn or contaminated plugs. Issues like misfires, reduced power, and a lit Check Engine Light are effectively prevented by timely plug replacements.

Fresh spark plugs not only boost engine performance and fuel efficiency but also play a significant role in reducing engine misfires, subsequently preserving expensive ignition coils and catalytic converters.

Turner Motorsport provides an array of brands, plug configurations, and heat ranges meticulously recommended by OEMs for various European applications, ensuring optimal performance and compatibility.

Benefits:

• Prevents misfires and engine performance issues
• Enhances fuel efficiency
• Reduces strain on ignition coils and catalytic converters
• Recommended by OEMs for European applications

Ignition coils are key to the efficiency and performance of your BMW. With a faulty coil the spark plug is not burning the air/fuel mixture properly and that can lead to problems anywhere in the engine and exhaust (including catalytic converters and O2 sensors). Problems with one or more coils will cause a fault code but not always a check engine light. A misfire code may be related to an ignition coil but could be from other things as well. Sometimes a visual inspection of a coil and coil boot will give an indication of a failure. You can also move coils around to different cylinder banks to see if the misfire code follows a suspect coil. We suggest always having one or two coils on hand to keep as spares.

Bosch is one of the largest OEM producers of Genuine BMW and aftermarket parts in the world, providing parts for almost every major automotive manufacturer. Bosch has likely supplied many of the original electrical (and mechanical) parts for your BMW. Thanks to their quality, high durability, and reliability, you should expect a long service life from Bosch products.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

EXTRACTOR:

The Schwaben 6.5 Liter Extractor empowers you with swift, hand-operated fluid extraction. Complete with two tubes of varying diameters to suit your unique needs, this system's vacuum release button guarantees seamless operation. Clearing 6.5 Liters (6.8 qts.) of fluid in minutes, it preserves a spotless, oil-free workspace. Its ingeniously designed pour spout ensures mess-free fluid disposal.

Features:

• Stability First: Equipped with a flip-out foot for steady usage, delivering precise extraction.
• Organized Efficiency: Integrated hose storage streamlines your extraction process.
• Perfectly Sized: A 41" main tube (3/8" OD) and two 35" extension tubes (1/4" and 3/16" OD) ensure versatility across applications.
• Beyond Extraction: It doubles as a brake bleeder with the optional ES3248036 Brake Bleeder Hose.
• LIFETIME REPLACEMENT: Like almost all Schwaben tools, this fluid extractor is backed by our lifetime replacement program should anything go wrong!

ADAPTER:

This adapter hose allows a quick and easy suction thru the bleeder screw. This hose has included shut off valve in hose.  This will improve your extractor capabilities and make it even more of an all-in-one tool!

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

Take your BMW’s cooling system to the next level with this Turner Motorsport Cooling Upgrade Kit. Featuring a Heavy-Duty Aluminum Expansion Tank and a Mechanical Thermostat Conversion Kit, this combo is engineered to deliver ultimate reliability and superior performance for M52TU/M54 engines. Say goodbye to the cooling system failures common in stock setups—Turner Motorsport has you covered.

Turner Motorsport M52TU/M54 Heavy-Duty Expansion Tank Kit

The Turner Motorsport Aluminum Expansion Tank is a premium upgrade designed to replace the fragile factory plastic tank, which is known to crack, leak, or even explode. Crafted for durability, this tank’s all-aluminum construction with wrinkle black powder coating ensures this is the last expansion tank you’ll ever need.

Why Upgrade? The factory plastic tanks on BMW M52TU/M54 engines are notorious for failure under heat and pressure. Avoid the risk of being stranded on the side of the road with a mess of coolant—Turner Motorsport’s aluminum expansion tank is built to withstand years of demanding use and intense heat cycles.

Key Features and Benefits:

Complete Kit: Includes Turner Aluminum Expansion Tank, coolant level sensor, expansion tank cap, and flared coolant pressure release line. OEM Fit & Capacity: Direct fit with no modifications, maintains stock coolant capacity and expansion volume. Baffled Design: Prevents air pockets during aggressive driving and ensures accurate coolant level readings. Premium Construction: TIG-welded 5052 aluminum with machined fittings for factory hose compatibility. Turner Motorsport M52TU/M54 Mechanical Thermostat Conversion Kit

Replace your problematic factory plastic thermostat housing with Turner Motorsport’s high-quality billet aluminum Thermostat Conversion Kit. This upgrade not only provides increased reliability but also allows for thermostat swaps to suit specific temperature requirements, making it ideal for daily drivers and track cars alike.

Why Make the Switch? The factory plastic thermostat housing with its built-in thermostat is prone to cracking and requires the whole unit to be replaced during maintenance. Turner’s conversion kit changes the game by providing a durable billet housing with a replaceable thermostat for flexibility and lower maintenance costs.

Key Features and Benefits:

Increased Reliability: Uses an M50/S50 mechanical thermostat, including an 80°C thermostat for enhanced cooling control. Customizable: Includes barbed hose connections for standard E46 M3 hoses and -16 ORB connections for custom hoses. Engineered to Last: CNC-machined from billet 6061 aluminum and black anodized for corrosion resistance. Enhanced Sealing: Features a Viton gasket for superior durability and sealing performance. Kit Includes:

6061 Billet Aluminum Thermostat Housing 80°C Mechanical Thermostat Thermostat Housing Gasket Thermostat Harness ECS Silicone E46 M3 Cooling Hoses Turner Motorsport Precision Engineering & Product Development

Every component in this cooling upgrade kit has been rigorously designed, engineered, and tested by Turner Motorsport’s Research and Development team. Using state-of-the-art technology such as FARO laser scanning, SolidWorks 3D modeling, and in-house rapid prototyping, Turner ensures that these products meet the highest standards of quality, precision, and durability.

Upgrade your BMW with confidence—Turner Motorsport is your partner in performance and reliability.

Bosch FLR8LDCU+ spark plug for M50, M52, and M62 engines. Listed as BMW part #'s 12129064617 and 12129059794. Over time spark plugs become contaminated, worn, and "fouled out". This can cause a weak or missing spark leading to issues with fuel efficiency, misfires, check engine codes, and poor idle or even direct damage to your catalytic converter. This OEM spark plug made by Bosch will restore OE spark plug operation and function, returning lost power and fuel efficiency.

Bosch is one of the largest OEM producers of Genuine BMW and aftermarket parts in the world, providing parts for almost every major automotive manufacturer. Bosch has likely supplied many of the original electrical (and mechanical) parts for your BMW. Thanks to their quality, high durability, and reliability, you should expect a long service life from Bosch products.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Bosch FGR7DQP spark plug for multiple BMW engines. Listed as BMW part #'s 12120037607, 12120141871, and 12121435955. Over time spark plugs become contaminated, worn, and "fouled out". This can cause a weak or missing spark leading to issues with fuel efficiency, misfires, check engine codes, and poor idle or even direct damage to your catalytic converter. This OEM spark plug made by Bosch will restore OE spark plug operation and function, returning lost power and fuel efficiency.

Bosch is one of the largest OEM producers of Genuine BMW and aftermarket parts in the world, providing parts for almost every major automotive manufacturer. Bosch has likely supplied many of the original electrical (and mechanical) parts for your BMW. Thanks to their quality, high durability, and reliability, you should expect a long service life from Bosch products.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!