Showing 1189 results for ""

If you're removing trim panels and don't want to scratch or break any pieces then this is a must have. Formed for precision and constructed from plastic to be gentle with the finish.

Features:

•  Wide type remover
• Pull type remover
•  Handy remover
• Narrow type remover
• Upholstery Clip remover
• Angled Clip Panel Remover
• Fork Tip Flat Clip Panel Remover
• Clip Panel Remover
• Sharp Tip Flat Clip Remover
• Panel Remover
• Blunt Tip Flat Clip Panel Remover

A satin chrome finish with a knurled ring around socket body, the knurling allows for a better grip when hands and sockets are covered in oil or grease. All sockets feature a radius in the corners for superior torque to the sides of the fastener, not the corner. Complete size coverage.

Features:

• 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm,
•  15mm, 16mm, 17mm, 18mm, 19mm
• Limited Lifetime Warranty

Here's what makes this floor jack the best on the market:

• Dual pump pistons to reach maximum height in 5 pumps
• Low profile design keeping lowered cars in mind
• Easy maneuverability 
• Two piece quick release padded handle for storage or transport.

Details:

• Jack Capacity 2 Ton
• Max Lift Height 20"
• Low Height 3.25"
• Chassis Length 26.5"
• Overall Width 13"
• Saddle Diameter 4.5"
• Handle Length 50"
• Shipping Weight 50 lbs

A simple design that makes compressing the caliper piston back in a breeze. The days of balancing the piston while turning a C-clamp are over.

Note: Not designed for use with screw-in type brake pistons.

Protecta socket are used to keep ugly scratch marks from showing up after torqueing down wheel lugs.

Features:

• Coated six-point long reach deep-well impact sockets 
• Color coded mar-free exterior coatings that prevent nicks and scratches left by plain metal sockets
• 17mm, 19mm and 21mm Sockets included

Use these with your breaker bar or impact gun to remove the tightest wheel bolts and lug nuts: when reinstalling wheels, use them to final torque wheel fasteners to factory specifications.

Combine these with our torque limiting sockets and the Schwaben ½-inch torque wrench for a complete wheel fastener solution.

Perfect for any job when it comes to keeping your hands clean and protected.

Features:

• High dexterity
• Elastic hook and loop strap
• Textured latex finger tips for grip
• Breathable material

The Schwaben 1/2" Drive Ratchet is a professional-grade tool built for durability and precision. Constructed from high-strength steel with a satin chrome finish, it is designed to resist corrosion and wipe clean easily after use.

The core of this tool is a 72-tooth gear mechanism that requires only 5° of movement to engage the next tooth. This fine-tooth design is critical for working in modern engine bays or tight chassis areas where your range of motion is severely limited.

TECHNICAL SPECIFICATIONS

Drive Size: 1/2" Length: 248mm (9.75") Gear Ratio: 72-tooth mechanism Arc Swing: 5° Material: High-strength alloy steel Finish: Satin Chrome FEATURES

Tight-Access Efficiency - a 5° arc swing allows for consistent bolt movement in cramped quarters where standard ratchets struggle Quick-Release Button - a positive-lock push-button mechanism holds sockets securely during high-torque applications and allows for immediate one-handed removal. Reliable Grip - satin finish provides a secure grip even when hands are oily, offering better control than high-polish alternatives.

The Schwaben Metric Bubble Flaring Tool Set stands as the ultimate solution for achieving precise brake line connections and flawless tubing applications. This tool set unlocks the ability to craft immaculate ISO bubble flares on brake lines and tubing systems commonly found in European, Japanese, and select domestic model brake lines. The outcome? Connections that are not only secure but also capable of thriving under your vehicle's demanding conditions.

At its core, this set features a robust and enduring hardened steel bar, embodying the essence of durability. Complementing this bar is an extensive array of adapters tailored for 4.75mm, 6mm, 8mm, and 10mm tubing, showcasing the set's versatility across various applications.

Discover unparalleled precision as you secure your brake lines and tubing with the utmost accuracy. This tool set empowers you to effortlessly shape bubble flares, guaranteeing connections that are both leak-proof and resilient. Whether you're a devoted automotive technician or a passionate enthusiast, the Schwaben Metric Bubble Flaring Tool Set is right for you!

Includes:

• Schwaben Metric Bubble Flaring Tool
• Hardened Steel Bar for Enduring Durability
• Adapters for 4.75mm, 6mm, 8mm, and 10mm Tubing

A professional quality flex ratchet features a fine satin finish designed for durability and easy clean up.

Features:

• Special designed 72T gear mechanism
• 5 degree of handle movement between gears 
• Flex head has 7 detent positions in a 180 degree swing
• Push button release holds socket tight until you are ready to release
• Ratchet is a full 290mm ( 11") long for extra leverage.

Limited Lifetime Warranty

When doing work where the mounts and support need to be removed from the engine or transmission having a engine support bar is wise. By using this engine support the stress is coming off of whatever components are still attached reducing future unnecessary repairs. The safety side of it is having the heavy engine and transmission firmly supported as it should be instead of questionable jack techniques.  

Features:

•  2" longer than most
•  Two angle chain hooks for safer and more stable chain support 
•  61" long and fully adjustable to any width
•  Weight rating is a full 1000 lbs.
•  Includes four rubber padded feet to prevent slipping and damage to cars finish 
• This tool features a dual hook design for holding engine or transmission in place
•  Powder coated for long life and durability

Note: It is important that chains are hooked to both sides of hook, like in photo to insure load is supported evenly. 

Take one wrench, not two to your next fluid service. The Schwaben Service Wrench fits both crankcase and drain plugs in BMW, Mercedes, and other European vehicles.

Features:

• Six-point 17mm box end won’t round off engine oil drain plugs
• Hardened 14mm hex at the opposite end fits many transmission fill and drain plugs
• Made of vanadium steel with polished chrome finish
• Long handle for added leverage.

Fits most vehicles with M10, M20, M30, M42, M44, M50, M52, M54, M56, M70, S14, S38, S50, S52 and S70.

Application note: Please verify the exact size of the transmission and differential plugs in your car. BMW has used both 14 and 17mm plugs in some vehicles. 

Improve your socket collection with the Schwaben 2 PC 3/8" Socket Adapter Set, a versatile addition to both DIY enthusiasts and professionals' toolkits. This set comprises two indispensable adapters: one seamlessly converts a 3/8" drive into a 1/4" drive, while the other adapts it into a 1/2" drive, making it a flexible solution for on-the-fly adjustments to your manual tools. Engineered specifically for square drives, these adapters ensure a secure and dependable connection.

Designed with a sleek chrome finish, these adapters not only deliver precision performance but also showcase durability and resistance to corrosion. Moreover, they are backed by our LIFETIME REPLACEMENT program, instilling unwavering confidence in your toolset's enduring value. Don't compromise on versatility – invest in the Schwaben 2 PC 3/8" Socket Adapter Set and equip yourself for any task that comes your way.

Includes:

• 3/8" F to 1/4" M adapter
• 3/8" F to 1/2" M adapter

Quality combination wrenches are a must when doing any kind of automotive work.

Features:

• A complete set from 8 to 19 mm 
• Professional quality wrenches in full length feature open end on one end and 12 pt box on the other
• Satin finish provides superior feel, slip resistant grip, easy cleanup and inhibits rust
• Includes sturdy wrench holder for easy storage
• Limited Lifetime Warranty

Looking to update your old torque wrenches? The Schwaben 3/8" Drive Digital Torque Wrench is your answer. 

This digital torque wrench uses an easy-to-read display to show torque amounts and settings, features a push button release, reversible 3/8" drive, 45 tooth ratchet head, and a comfortable no-slip grip and adjustment wheel.

Specifications:

• Setting Range: 45-220 ft lbs (60-300 Nm)
• Display Units: ft-lbs, N-m, Inch-lbs, cm-kg2, and m-kg
• Size: 22" (550mm) length for easy leverage
• Accuracy: +- 3%
• Include blow molded holding case
• Requires one 3V CR2030 battery (included)

This large socket is the perfect tool for axle nuts when servicing the axle shafts or wheel bearings.

Features:

• ½-inch drive 30mm 12-point socket
• 75mm depth  to accommodate many applications and different length shafts
• Made of durable chrome vanadium steel

• E36 3 series (1992-1999) -- no M3
• E46 323/325 (1999-2005) -- no 330/M3

Having a creeper can make working under the car much easier and more comfortable, roll in and out, padding, and keeping those clothes a bit cleaner. 

 Features:

• Thick fully padded leatherette cover.
• 40" long with heavy-duty metal support frame.
• 1"" steel tube frame.
• Four position adjustable headrest.
•  Six 2 1/2"oil-resistant rollers.
• Powder coated frame to resist rusting.
• Overall dimensions: 17" x 40" X 4"
• Ground clearance: 1-1/2"
• Ball bearing swivels on wheels.
• 250lb capacity.