BMW Tools & Specialty Equipment for BMW 3 Series E46 (1999-2005)

Clear BMW chassis

Please ensure your correct model is selected

Performing certain maintenance and adjustments on your BMW is often a hassle or impossible without the proper tools. The difference between an enthusiast and an owner is the determination to get the job done on our own cars for pure satisfaction and to strengthen the bonds we share. All the specific tools you need to get the job done right, from fan clutch tools, cam alignment tools, and steering rack alignment tools, to coilover adjustment spanners, diagnostic equipment, and more have all been selected by our experts to help maintain your BMW.

Sub-Categories

Sort By:

Performance Tool - Corporate Logo
T#:1809126
Part#: W80554
Ships in 3 Business Days
$ 64.25 USD
Free Shipping on orders $49 and up
Safely and easily compresses coil springs accessible from the center of the coil.
Race Ramps - Corporate Logo
T#:641873
Part#: RR-RC-5
Ships on Oct 20, 2026
$ 58.99 USD
Free Shipping on orders $49 and up
12" racer chock – ultimate tire grip
AGA Tools - Corporate Logo
T#:42638588
Part#: AGA-APIT
Ships in 8 Business Days
$ 497.99 USD
Free Shipping on orders $49 and up
This tool kit is designed to make removing/installing axles easier and prevent damage to the axle boot or dust seals on the axles.

AGA Tools - Corporate Logo
T#:6924319
Part#: AGA-6061-TC
Ships in 8 Business Days
$ 99.99 USD
Free Shipping
$ 99.99 USD
Free Shipping

BMW E60 M5 Crank Case Test Cap

The BMW E60 M5 Crank Case Test Cap is designed to facilitate accurate testing of crankcase pressure across a range of vehicle models. This versatile test cap is compatible with early and late model vehicles equipped with steel, aluminum, or plastic valve covers. Featuring a multi-diameter fitting, it connects directly to IMIBs, handheld manometers, and smoke machines, eliminating the need for adapters and ensuring precise readings without leaks.

Benefits:

  • Versatile Compatibility: Suitable for use with steel, aluminum, and plastic valve covers on early and late model vehicles.
  • Direct Connection: Multi-diameter fitting allows direct connection to IMIBs, handheld manometers, and smoke machines.
  • Leak Prevention: Eliminates the need for adapters, reducing the risk of leaks and inaccurate readings.
  • Enhanced Accuracy: Provides reliable crankcase pressure testing for better diagnostic results.
Show More Show Less

Hazet - Corporate Logo
T#:6181652
Part#: 903SLG-19
In Stock at Vendor
$ 49.35

This product was last offered at the strikethrough price on
05-12-2026

$ 48.09 USD
Free Shipping on orders $49 and up
$ 48.09 USD
Free Shipping on orders $49 and up
Material-friendly wheel socket
Race Ramps - Corporate Logo
T#:2438599
Part#: RR-WS-14
Ships on Oct 20, 2026
$ 376.99 USD
$ 376.99 USD
Designed as an alignment stand, this set of two wheel stands can also be used for car display stands in showrooms or at shows.

Performance Tool - Corporate Logo
T#:1856004
Part#: W1388
Ships in 2 Business Days
$ 22.99 USD
Free Shipping on orders $49 and up
Chrome vanadium steel construction.
AGA Tools - Corporate Logo
T#:5189146
Part#: AGA-BPB-1000
Ships in 8 Business Days
$ 108.99 USD
Free Shipping
$ 108.99 USD
Free Shipping
Make bleeding brakes a one man job!

Genuine BMW - Corporate Logo
T#:11239
Part#: 71111179522
Ships in 1-2 days
4% off MSRP $ 47.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 45.99 USD
Free Shipping on orders $49 and up
4% off MSRP
$ 47.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 45.99 USD
Free Shipping on orders $49 and up
Missing a tool from your trunk mounted tool kit? Replace your missing water pump pliers with this Genuine BMW part. Having a complete tool kit is handy for quick repairs or it can save you in case of roadside failures. Also a complete tool kitis must when selling a car. If the tool kit is missing parts, what else has been neglected on the car?

This item fits the following BMWs:
1970-1976 2002 BMW 1600 2002 2002tii
1977-1983 E21 BMW 320i
1984-1991 E30 BMW 318i 318is 318ic 325e 325es 325i 325ic 325is 325ix M3
1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
1976-1978 E12 BMW 530i
1982-1988 E28 BMW 528e
1989-1995 E34 BMW 525i 530i 535i 540i M5
1997-2003 E39 BMW 525i 528i 530i 540i M5
1988-1994 E32 BMW 735i 735il 740i 740il 750il
1995-2001 E38 BMW 740i 740il 750il
1990-1999 E31 BMW 840i 840ci 850i 850ci 850csi
1996-2000 Z3 BMW M Roadster M Coupe
2000-2003 E52 BMW Z8 Roadster
Show More Show Less

Genuine BMW - Corporate Logo
T#:171694
Part#: 83300493306
Ships in 5 Business Days
$ 119.99 USD
Free Shipping
$ 119.99 USD
Free Shipping
Genuine BMW TOOLS
Genuine BMW - Corporate Logo
T#:156504
Part#: 71111230685
Ships in 1-2 days
1% off MSRP $ 203.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 201.99 USD
Free Shipping
1% off MSRP
$ 203.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 201.99 USD
Free Shipping
Genuine BMW TOOL KIT
Genuine BMW - Corporate Logo
T#:10333
Part#: 52107045018
Ships in 1-2 days
3% off MSRP $ 36.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 35.99 USD
Free Shipping on orders $49 and up
3% off MSRP
$ 36.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 35.99 USD
Free Shipping on orders $49 and up


Genuine BMW Bracket First Aid Box
This item fits the following BMW Chassis:
E46 M3,E85 Z4M,E53 48IS,E46,E53 X5,E83 X3,E85 Z4,E86 Z4



Genuine BMW - Corporate Logo
T#:170181
Part#: 83300490504
Ships in 1-2 days
$ 207.99 USD
Free Shipping
$ 207.99 USD
Free Shipping


Genuine BMW Torque Wrench - No. 009120

Baum Tools - Corporate Logo
T#:2839821
Part#: B113240VK
In Stock
$ 592.46 USD
Free Shipping
$ 592.46 USD
Free Shipping
For camshaft timing & to adjust Single/Double VANOS
VIM Tools - Corporate Logo
T#:31887580
Part#: HCT1050A
In Stock
$ 39.99 USD
Free Shipping on orders $49 and up

Designed for precision and durability, the VIM Tools 10 Piece Half Cut Stubby Torx Driver Set offers an updated solution for Torx applications. This new version of the HCT1050 is now packaged on a green Magrail, delivering a streamlined organization system for your tools.

With sizes ranging from T10 through T50, each driver features a 1/4" square drive and a compact 3/4" overall length, perfect for tight spaces. Crafted from heat-treated S2 steel with a satin chrome finish, these drivers ensure long-lasting performance and corrosion resistance.


Key Features:

  • Wide Range of Sizes: T10 through T50 to cover various applications.
  • Compact Design: 1/4" square drive with 3/4" overall length for hard-to-reach areas.
  • Durable Build: Heat-treated S2 steel for enhanced strength and durability.
  • Satin Chrome Finish: Corrosion-resistant and easy to clean.
  • Half Cut Design: 1/2" cut drivers offer precise fitment.
  • Magnetic Organization: Packaged on a green Magrail for convenient storage.


Includes:

  • T10 (HCT10-04)
  • T15 (HCT15-04)
  • T20 (HCT20-04)
  • T25 (HCT25-04)
  • T27 (HCT27-04)
  • T30 (HCT30-04)
  • T40 (HCT40-04)
  • T45 (HCT45-04)
  • T47 (HCT47-04)
  • T50 (HCT50-04)
Show More Show Less

VIM Tools - Corporate Logo
T#:2393399
Part#: VIMDT1
In Stock
$ 58.99 USD
Free Shipping on orders $49 and up
Heat Treated Stainless Steel

OEM Tools - Corporate Logo
T#:3729830
Part#: OEM24246
Ships in 7 Business Days
$ 22.99 USD
Free Shipping on orders $49 and up
Hold Glass firmly with this windshield tool.
Brake Bleeder Bottle with Lanyard
10X Entries Into Our F80 M3 Sweepstakes
Turner Motorsport - Corporate Logo
T#:302461
Part#: BBL
Ships on Nov 2, 2026
Sale - Save 5% $ 28.99

This product was last offered at the strikethrough price on
06-13-2026

$ 27.54 USD
Free Shipping on orders $49 and up
Sale - Save 5%
$ 28.99

This product was last offered at the strikethrough price on
06-13-2026

$ 27.54 USD
Free Shipping on orders $49 and up
The Brake Bleeder Bottle with Lanyard is an indispensable tool for automotive enthusiasts and professionals seeking a hassle-free and efficient solution for bleeding brake systems. This innovative brake bleeder bottle offers several features that make the brake bleeding process smoother and more convenient than ever before. One of the standout features of this brake bleeder bottle is its "park" feature. This feature is designed to prevent spills and messes during the brake bleeding process. It allows you to secure the hose in a stable position, ensuring that it stays in place and doesn't accidentally tip over or spill brake fluid. This not only saves time but also helps maintain a clean and organized work environment, which is crucial when working on brake systems. The "park" feature is complemented by a metal lanyard that comes with the bottle. This metal lanyard serves as an additional means of keeping the bottle stable and in one place. You can attach the lanyard to a fixed point in your workspace, such as a vehicle frame or a nearby hook, and then secure the bottle to it. This ensures that the bottle remains securely in position throughout the brake bleeding process, minimizing the risk of accidents and fluid spills. The Brake Bleeder Bottle with Lanyard is not only practical but also durable. It is built to withstand the rigors of automotive maintenance and is compatible with a wide range of brake systems. Its user-friendly design makes it suitable for both beginners and experienced technicians, allowing for efficient and mess-free brake bleeding.
Show More Show Less

Turner Motorsport Brake Bleeder Bottle
10X Entries Into Our F80 M3 Sweepstakes
Turner Motorsport - Corporate Logo
T#:338572
Part#: TMS1196
Ships on Oct 30, 2026
Sale - Save 5% $ 28.99

This product was last offered at the strikethrough price on
06-13-2026

Starting at $ 27.54 USD
Free Shipping on orders $49 and up
Sale - Save 5%
$ 28.99

This product was last offered at the strikethrough price on
06-13-2026

Starting at $ 27.54 USD
Free Shipping on orders $49 and up
The Turner Motorsport Brake Bleeder Bottle is the perfect companion when bleeding your brakes! The bottle features a nice long flexible hose so fitment over the bleeder nipple is a snap. These bottles also offer either a magnetic mount or a cable lanyard, so you can hang the bottle or stick it to the brake rotor, this leaves your hands-free to work with your tools. It works great with our Power Brake Bleeder
Show More Show Less
Schwaben Axle Impact Socket Kit - 6 Pieces
10X Entries Into Our F80 M3 Sweepstakes
Schwaben - Corporate Logo
T#:386378
Part#: DS-6P
In Stock
Sale - Save 25% $ 78.99

This product was last offered at the strikethrough price on
05-02-2026

$ 59.24 USD
Free Shipping
Sale - Save 25%
$ 78.99

This product was last offered at the strikethrough price on
05-02-2026

$ 59.24 USD
Free Shipping

When it comes to the torque found on axle nuts you're already looking at using a breaker bar or impact gun not to mention the corrosion collected over the years. The safest approach is using impact socket, since they are built with the strength needed to avoid breaking under pressure.

Features:

  • Heavy duty ½ inch-drive sockets and drivers have extra thick alloy steel walls, and take a beating that would destroy normal sockets
  •  Durable black oxide coating wipes clean easily and resists rust
  • Contains three 12-point sockets for a sure grip on the most common sized axle nuts, plus three hex drives for removing common hex-head plugs and fasteners
  • Conveniently packaged in a blow molded case, this set will please the most demanding professional technician or discriminating prosumer

Kit includes:

  • 30mm, 32mm, and 36mm - 12-point axle nut sockets - ½" drive

  • 14mm, 17mm, and 19mm hex head drive axle shoulder bolt sockets - ½" drive

Show More Show Less

Schwaben Brake Caliper Piston Tool Kit - 18 Pieces
10X Entries Into Our F80 M3 Sweepstakes
Schwaben - Corporate Logo
T#:638116
Part#: PBK-18PCS
In Stock
Sale - Save 20% $ 89.99

This product was last offered at the strikethrough price on
05-02-2026

$ 71.99 USD
Free Shipping
Sale - Save 20%
$ 89.99

This product was last offered at the strikethrough price on
05-02-2026

$ 71.99 USD
Free Shipping
Everything you need to compress the brake caliper pistons on your BMW

CTA Tools - Corporate Logo
T#:1241318
Part#: CTA2030
Ships on Oct 21, 2026
$ 81.95 USD
Free Shipping
$ 81.95 USD
Free Shipping
Get the complete set and be ready.
CTA Tools - Corporate Logo
T#:2393395
Part#: CTA9630
Ships on Oct 21, 2026
$ 57.99 USD
Free Shipping on orders $49 and up
Includes sizes T10 through T60


CTA Tools - Corporate Logo
T#:2393414
Part#: CTA2073
In Stock
$ 50.01 USD
Free Shipping on orders $49 and up
Get the complete set.
CTA Tools - Corporate Logo
T#:641442
Part#: CTA4223
Ships on Oct 21, 2026
$ 42.87 USD
Free Shipping on orders $49 and up
12-point semi deep mini flip sockets with ¼” drive
Schwaben Hex Head Socket Kit - 9 Pieces
10X Entries Into Our F80 M3 Sweepstakes
Schwaben - Corporate Logo
T#:386380
Part#: HBS-M9PCSH
Ships on Oct 28, 2026
Sale - Save 15% $ 26.99

This product was last offered at the strikethrough price on
05-02-2026

$ 22.94 USD
Free Shipping on orders $49 and up
Sale - Save 15%
$ 26.99

This product was last offered at the strikethrough price on
05-02-2026

$ 22.94 USD
Free Shipping on orders $49 and up

A perfect collection of hex head sockets compiled in a case that's always ready to go.

Features:

  • High strength hex driver set, in 3/8 and 1/2-inch drive, is rugged enough for professional use and includes 4, 4.5, 5.5, 6, 8, 12, 14, and 17mm sizes
  • Conveniently housed in a sturdy blow molded case for portability and easy organization.

 

Show More Show Less

Doorbusters - Corporate Logo
T#:34919064
Part#: 019744TMS01A1KT
In Stock
$ 132.99 USD
Free Shipping on orders $49 and up

MAGNETIC FENDER COVER:

Protect your finish when working under the hood with a high quality Turner fender cover. Made from a synthetic leather layer with a goose flannelette backing for durability and protection. The Turner fender cover holds a tight grip to your fender or core support with four 9.5" magnets sewn into the top layer.


Features:

  • Durable synthetic leather with the Turner logo
  • Soft goose flannelette backing
  • Four 9.5" integrated magnets


Dimensions:

  •  Extra Long 20" x 47"


TELESCOPING LED MIRROR:

You are going to love this tool. This Schwaben telescoping lighted mirror can get you out of a jam when you need to look at something you can not see any other way. Use with or with out the mirror attached. Lighting can reflect on mirror to light at many angles. Great for finding missing parts beneath engine block or oil leaks.

Features:

  • Handy pocket clip
  • Pivoting quick attach mirror for perfect viewing at any angle.
  • Extends up to 26 1/4" for hard to reach places.
  • Collapsed length 6.5" without mirror attached, 9.5" with 
  • High quality mirror provided a perfect reflection.
  • Easy on and off. Turns on when extended and off when collapsed.
  • 44,000 MCD brightness.
  • Long life span up to 100,000 hours on LED bulb.
  • Operates on 3 AG3/LR41 batteries 
  • Includes batteries


TELESCOPING MAGNET:

This Schwaben telescoping magnet is a great addition to any tool box. Magnet is rated to pickup 3.5 lbs. Stainless steel shaft is 7" collapsed and 26" extended. Magnet is encased in a aluminum sleeve to help prevent side of magnet from sticking. Cushion grip rubber handle works great with dry or oily hands.


MAGNETIC PARTS TRAYS:

Stop losing nuts, blots, and screws. The Schwaben magnetic parts tray has a large 4-3/8 inch diameter stainless steel bowl with a rubber-coated magnetic base that won't mar painted surfaces.

Attach the tray to any ferrous metal on the vehicle, and toss in your steel fasteners as you remove them. The magnet holds them safely in place until you are ready to use them again. Works right side up or inverted for under-car repairs.

A simple, effective solution to a common problem.


WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

Show More Show Less

Schwaben Universal 3-Jaw Adjustable Oil Filter Wrench
10X Entries Into Our F80 M3 Sweepstakes
Schwaben - Corporate Logo
T#:378200
Part#: 006212SCH01A
In Stock
Sale - Save 25% $ 26.99

This product was last offered at the strikethrough price on
05-02-2026

$ 20.24 USD
Free Shipping on orders $49 and up
Sale - Save 25%
$ 26.99

This product was last offered at the strikethrough price on
05-02-2026

$ 20.24 USD
Free Shipping on orders $49 and up
Use on to remove spin-on type filters from 2-1/2" to 3-3/4" (63.5-95mm). 3/8" square drive works with 3/8" ratchet or extension.
Wheel Hanger 3-Pack - Schwaben
10X Entries Into Our F80 M3 Sweepstakes
Schwaben - Corporate Logo
T#:577651
Part#: HANGERPACKKT
In Stock
Sale - Save 22% $ 86.99

This product was last offered at the strikethrough price on
05-03-2026

$ 67.48 USD
Free Shipping on orders $49 and up
Sale - Save 22%
$ 86.99

This product was last offered at the strikethrough price on
05-03-2026

$ 67.48 USD
Free Shipping on orders $49 and up
Just thread the hanger stud into a wheel bolt hole and hang the wheel safely while you rotate tires or remove them for service or vehicle repair. (It's also great for keeping wheel bolt holes aligned on cars with spacers.)
Show More Show Less

Bav Auto Tools - Corporate Logo
T#:580383
Part#: B8800067
In Stock
Sale - Save 20% $ 29.99

This product was last offered at the strikethrough price on
05-03-2026

$ 23.99 USD
Free Shipping on orders $49 and up
Sale - Save 20%
$ 29.99

This product was last offered at the strikethrough price on
05-03-2026

$ 23.99 USD
Free Shipping on orders $49 and up
This 1/2" Drive, 7/8" x 6" Extra Long O2 sensor tool is used to remove difficult to reach oxygen sensors.
Bav Auto 9-Way Slide Hammer Puller Set
10X Entries Into Our F80 M3 Sweepstakes
Bav Auto Tools - Corporate Logo
T#:580405
Part#: B8800095
In Stock
Sale - Save 5% $ 104.99

This product was last offered at the strikethrough price on
05-03-2026

$ 99.74 USD
Free Shipping on orders $49 and up
Sale - Save 5%
$ 104.99

This product was last offered at the strikethrough price on
05-03-2026

$ 99.74 USD
Free Shipping on orders $49 and up
A complete slide hammer kit for your next suspension job.

Strut and Shock Installation/Removal Set
10X Entries Into Our F80 M3 Sweepstakes
Schwaben - Corporate Logo
T#:583366
Part#: 026901SCH01A
Back Ordered
Sale - Save 10% $ 124.99

This product was last offered at the strikethrough price on
05-03-2026

$ 112.49 USD
Free Shipping on orders $49 and up
Sale - Save 10%
$ 124.99

This product was last offered at the strikethrough price on
05-03-2026

$ 112.49 USD
Free Shipping on orders $49 and up

When dismantling a suspension strut sometimes the securing nut can be difficult to access and the central strut itself needs to be held still while the nut is undone. This new Shock Absorber Tool Kit is designed to overcome these problems and make the job quick and easy.

The go-through design of the sockets and ratchet design allows the strut lock extensions to go right through the middle of the ratchet and socket. Five different strut lock extensions are included, to fit a variety of applications. Seven go-through deep sockets (16, 17, 18, 19, 21, 22 and 24mm) are included, plus a sliding T-bar.

Once the spring is compressed and the top plate is free, simply choose the correct strut lock extension and socket. Then fit the socket and the ratchet handle, and fit the strut lock straight through. The central strut is held steady, and the securing nut is quickly removed.

Specifically designed for repairing and replacing shock absorbers and struts
Contents: 7 - Go Thru' deep sockets: 16/17/18/19/21/22/24mm
3 x 1/2"D Hex bits: 6mm/7mm/8mm,
1 x sliding T-bar 1/2"D,
2 x slot bit sockets 5 x 8mm, 6 x 8mm x 1/2"D
Also includes 1 x 21mm Hex Go Thru' ratchet
Packed in a blow mold case for easy storage
For California Prop 65 warning see: www.P65Warnings.ca.gov.

Show More Show Less

Schwaben Impact Screwdriver Kit - 6 Pieces
10X Entries Into Our F80 M3 Sweepstakes
Schwaben - Corporate Logo
T#:367482
Part#: PCS2800
Ships on Oct 28, 2026
Sale - Save 25% $ 36.99

This product was last offered at the strikethrough price on
05-02-2026

$ 27.74 USD
Free Shipping on orders $49 and up
Sale - Save 25%
$ 36.99

This product was last offered at the strikethrough price on
05-02-2026

$ 27.74 USD
Free Shipping on orders $49 and up

The impact driver is a fast and effective way to remove tight or corroded screws and bolts, reducing the chance of rounding off--or rounding out--the fastener head. Insert a slotted or Phillips head screwdriver bit into the driver.

For stubborn bolts, remove the black screwdriver bit adapter head, and replace it with any 3/8 - inch drive socket.

Features:

  • Impact driver tool with red rubber grip 
  • Four screwdriver bits (2 Phillips; 2 slotted) 
  • 3/8 - inch drive bit holder

 

Show More Show Less
Race Ramps - Corporate Logo
T#:2438592
Part#: RR-WC-12-2
Back Ordered
$ 264.99 USD
Free Shipping
$ 264.99 USD
Free Shipping
Safer than jack stands and far more attractive, our multi-purpose 12-inch Wheel Cribs are a stable, sleek alternative that offer greater maneuverability and versatility.
Schwaben by Race Ramps - Corporate Logo
T#:363130
Part#: 006182SCH01A
In Stock
$ 232.99 USD
Free Shipping
$ 232.99 USD
Free Shipping
  • Tough and rigid expanded polystyrene foam (EPS) with a load rating of 1,500lbs per wheel (almost twice what the normal corner weight would be on a 3-series BMW)
  • 12" height X 12" width with minimal compression under load
  • Light weight with each block weighing less than 6lbs and with a handy strap for carrying or hanging
  • Curved cradle for the tire to sit inside
  • Non-skid surface that won't scratch your floor

Looking for an alternative to your jack stands? With these wheel blocks you won't have to think twice about a jack stand scratching or denting the underside of your floor or the car falling off the jack stand. These work best when used with a floor jack under the subframe and the opposite axle wheels chocked. These are also a light weight and inexpensive alternative to the super-pricey plastic and metal ramps. They are resistant to most fluids and chemicals (but not solvents) and will never rust unlike metal ramps and blocks.

Also available in a 10" height.

Show More Show Less


WD-40 - Corporate Logo
T#:4042174
Part#: 30004KT
Back Ordered
$ 36.99 USD
Free Shipping on orders $49 and up
Removes tough rust from metal parts and tools without scraping
Milwaukee - Corporate Logo
T#:5886926
Part#: 48-22-9506
In Stock
$ 134.99 USD
Free Shipping
$ 134.99 USD
Free Shipping
Milwaukee's Ratcheting Combination Wrenches feature 2.5° of arc swing, allowing our users to work quickly and efficiently in tight spaces.
Bav Auto Brake Disc Run Out and Ball Joint Wear Gauge
10X Entries Into Our F80 M3 Sweepstakes
Bav Auto Tools - Corporate Logo
T#:580425
Part#: B8800118
In Stock
Sale - Save 3% $ 80.99

This product was last offered at the strikethrough price on
05-03-2026

$ 78.56 USD
Free Shipping
Sale - Save 3%
$ 80.99

This product was last offered at the strikethrough price on
05-03-2026

$ 78.56 USD
Free Shipping
Used to measure the wear on brake discs and ball joints.

Complete BMW/MINI Low Profile Lifting and Service Kit
10X Entries Into Our F80 M3 Sweepstakes
Schwaben - Corporate Logo
T#:583786
Part#: 011362SCH01AKT3
In Stock
Sale - Save 7% $ 554.99

This product was last offered at the strikethrough price on
05-03-2026

$ 513.86 USD
Sale - Save 7%
$ 554.99

This product was last offered at the strikethrough price on
05-03-2026

$ 513.86 USD

Bav Auto Angled Hose Pinch Plier Set - 2pc
10X Entries Into Our F80 M3 Sweepstakes
Bav Auto Tools - Corporate Logo
T#:580379
Part#: B8800058
In Stock
Sale - Save 25% $ 32.99

This product was last offered at the strikethrough price on
05-03-2026

$ 24.74 USD
Free Shipping on orders $49 and up
Sale - Save 25%
$ 32.99

This product was last offered at the strikethrough price on
05-03-2026

$ 24.74 USD
Free Shipping on orders $49 and up
Angled jaws close, creating a complete seal every time you use them - the jaws are offset, making it possible to use in hard-to-reach locations. Made of glass-filled nylon for extra strength. These are perfect for use with brake lines, etc.
Show More Show Less
Foxwell TS5000 Smart Tablet TPMS Tool
10X Entries Into Our F80 M3 Sweepstakes
Schwaben by Foxwell - Corporate Logo
T#:27105171
Part#: TS5000
In Stock
Sale - Save 21% $ 450.00

This product was last offered at the strikethrough price on
05-03-2026

$ 355.99 USD
Limited Qty Sale
Free Shipping on orders $49 and up
Sale - Save 21%
$ 450.00

This product was last offered at the strikethrough price on
05-03-2026

$ 355.99 USD
Limited Qty Sale
Free Shipping on orders $49 and up

The Foxwell TS5000 Tablet TPMS Service Tool is a mid-level tool designed to activate OEM/Universal TPMS sensors, retrieve comprehensive TPMS sensor data including sensor ID, tire pressure, temperature, battery condition, and OE part number. With the ability to relearn 98% of sensor IDs, program FOXWELL T10-sensors to replace old sensors, and even test Remote Keyless Entry Key Fobs, this tool offers a versatile solution for automotive professionals and enthusiasts alike.

Equipped with regular hardware and software updates, the Foxwell TS5000 Tablet TPMS Service Tool enables users to address automotive issues with enhanced precision and efficiency. It strikes the perfect balance between advanced TPMS diagnostic capabilities and affordability, making it the go-to choice for enthusiasts seeking top-notch performance without the usual high costs associated with TPMS tools.


Standout Features (How does it standout from previous models, i.e. the T1000/T2000?):

  • Will allow you to connect to all sensors at once and view all of their data at the same time
  • Can now program sensors by copying through OBD (eliminates need for relearn, see "Programming" in description for details)
  • Wireless connection to OBD2 port
  • Wireless updates (One Touch Update)
  • Larger screen (5.5-inch screen, T2000 is 2.8-inch)
  • Updated, larger hardware (32 GB RAM, 5V battery, now offers camera for VIN-reading)
  • CAN FD support
  • Print TPMS sensor data on PC


More Features:

  • Activate 98% OEM/Universal TPMS sensors
  • Programs FOXWELL T10 Sensors in 4 Different Ways: Copy by OBD, Copy by Activation, Copy Manually, and Auto Create Sensors
  • 3 TPMS Relearning Methods: OBD Relearn, Automatic Relearn, and Stationary Relearn
  • Fast Reading Sensor Data: Include sensor ID, tire pressure, temperature, battery, frequency, etc.
  • Key Fob Testing Tool: Precisely test 315MHz and 433MHz key fobs to ensure whether it is perfectly running
  • Read TPMS Live Data
  • Basic Code Reading capabilities using OBDII
  • Solid and Rugged Construction: Well-constructed with materials designed to handle harsh work environments
  • Intuitive and Easy Instructions: Easy to navigate and operate with clear instructions and detailed user manual
  • Free Software Updates for Life
  • LIFETIME REPLACEMENT program


Programming:

With this TPMS programming tool, you can program FOXWELL T10 TPMS sensors (T2317833 or T2317834 ) to meet the specifications of a particular vehicle before new sensor installation and relearn. 4 different sensor programming methods are supported by the FOXWELL TS5000 TPMS Service Tool: Copy by Activation; Manual Create; Automatic Create. (Note: TS5000 will only program a replacement sensor if it is a FOXWELL T10 sensor, which can be easily found on our site.)

  • Copy by OBD:
    • This method pulls the previously registered sensor ID through the vehicle's TPMS module using OBDII, and will then program the ID to the FOXWELL T10 sensor
    • This eliminates the need for a relearn by combining both steps into one
  • Copy by Activation
    • If your original sensor works and can be activated. You could use this method to program a new sensor. It will clone the original ID to the new FOXWELL T10 sensor.
  • Copy by Manual Input:
    • If you know the original sensor ID, you can input the ID to program new sensor.
  • Auto Create Sensors:
    • If you don't know the original sensor ID or your original sensor was bad, you can choose this method. Install new sensor ID--> program new sensor--> perform TPMS learning and let the car recognize new sensor


Relearning:

The FOXWELL TS5000 TPMS Service Tool can be used as a professional TPMS relearn scanner, to relearn almost all known sensor IDs, which is compatible with 95% of vehicles equipped with TPMS and extremely popular among car repair ships and DIY car owners. To ensure compatibility with different vehicles, 3 types of TPMS sensor relearning are offered:

  • OBD Relearn:
    • Usually the most effective relearn tactic, this will allow you to connect the TS5000 to your car wirelessly using the OBDII port and placing your vehicle in a relearn mode.
  • Automatic Relearn:
    • For some vehicles, the “Relearn” function can be completed automatically by driving, which makes it quite easy to do a complete set of sensor replacement operations on your own. Be aware that this may require you to drive the vehicle at a certain speed for a designated amount of time for it to relearn.
  • Stationary Relearn:
    • TS5000 allows the new TPMS sensor IDs to be transferred without driving a vehicle. You can trigger the sensors when the vehicle is in learn mode by our TPMS Tool TS5000. This will usually require a specific sequence created by the vehicle manufacturer as well, such as pressing the brake a few times, turning the key, etc.

Please note that some vehicles require a combination of these relearning methods, such as needing to drive for a designated amount of time after relearning using OBD. There may also be extra steps your manufacturer uses, so please research your specific vehicle when performing a relearn!


Note:

  • Certain functions may be limited from the vehicle manufacturer due to the requirement of a special factory access code. 
    • Pre OBDII vehicles will have limited feature availability
  • We recommend purchasing a Bentley Manual to use with your TPMS Tool.
  • You will need to register your TPMS tool in order to receive update notice's from Foxwell via E-mail
  • Vehicles with 20 pin under hood connector will require T366829  for use 


Support:

For software and hardware support from Foxwell the address is http://www.foxwelltech.com/support/ - Make sure you use the correct address

For after sales issues please contact Nina at [email protected]. Please allow 48 hours for response.

Show More Show Less

NOCO - Corporate Logo
T#:641115
Part#: GBC003
In Stock
Sale - Save 6% $ 24.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 23.61 USD
Free Shipping on orders $49 and up
Sale - Save 6%
$ 24.99

This product was last offered at the strikethrough price on
05-03-2026

$ 23.61 USD
Free Shipping on orders $49 and up

The NOCO GBC003 Boost HD Precision Battery Clamps are heavy-duty clamps crafted for use with 12-volt gas and diesel engines. These clamps feature a needle-nose profile, allowing them to fit any shape or size battery terminal, from small terminals in tight spaces to top and side post batteries, as well as large terminal sizes. Their robust and rugged springs ensure maximum current flow with minimal power loss. Additionally, the Boost HD Precision accessory boasts no-melt and smoke-free properties, high current transferability, and reinforced all-metal construction.


Features: 

  • Heavy-duty battery clamp designed for both 12-volt gas and diesel engines.
  • Needle-nose clamp profile for jump starting hard-to-reach and oversized battery terminals.
  • Made from durable, heat stabilized 8 AWG silicone wire that maintains its flexibility in cold weather environments.
  • Engineered to efficiently transfer maximum current flow with minimal power loss.
  • Compatible with the GB20, GB40, GB50, and GBX45 UltraSafe Lithium Jump Starters.


WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

Show More Show Less
3/8" Drive Extension - 24"
10X Entries Into Our F80 M3 Sweepstakes
Schwaben - Corporate Logo
T#:641299
Part#: LCB160SCH2
In Stock
Sale - Save 20% $ 25.99

This product was last offered at the strikethrough price on
05-03-2026

$ 20.79 USD
Free Shipping on orders $49 and up
Sale - Save 20%
$ 25.99

This product was last offered at the strikethrough price on
05-03-2026

$ 20.79 USD
Free Shipping on orders $49 and up
Complete your tool set with this extension.

CTA Tools - Corporate Logo
T#:4126654
Part#: CTA9350
In Stock
Sale - Save 10% $ 57.99

This product was last offered at the strikethrough price on
05-15-2026

$ 51.97 USD
Free Shipping on orders $49 and up
Sale - Save 10%
$ 57.99

This product was last offered at the strikethrough price on
05-15-2026

$ 51.97 USD
Free Shipping on orders $49 and up
5 Pc. XZN Socket Set with Extra-Long Shaft

Schwaben Tamper Resistant 6-Point Torx Kit - 6 Pieces
10X Entries Into Our F80 M3 Sweepstakes
Schwaben - Corporate Logo
T#:386440
Part#: HBS-6PCSTP
In Stock
Sale - Save 25% $ 32.99

This product was last offered at the strikethrough price on
05-02-2026

$ 24.74 USD
Free Shipping on orders $49 and up
Sale - Save 25%
$ 32.99

This product was last offered at the strikethrough price on
05-02-2026

$ 24.74 USD
Free Shipping on orders $49 and up

The Schwaben Torx® set contains six drivers, all with center hole, suitable for use on both standard and tamper-proof Torx fasteners

Features:

  • Each 3/8-inch driver shank is clearly stamped with the bit size, and has a ribbed circumference for improved grip when turning fasteners by hand
  • High strength driver set is tough enough for regular use and includes T15, T20, T30, T40, T45, and T50 sizes
  • Conveniently housed in a sturdy blow molded case for portability and easy organization.
Show More Show Less
Swivel Jaw Filter Wrench Pliers
10X Entries Into Our F80 M3 Sweepstakes
Schwaben - Corporate Logo
T#:378215
Part#: 006309SCH01A
In Stock
Sale - Save 20% $ 56.99

This product was last offered at the strikethrough price on
05-02-2026

$ 45.59 USD
Free Shipping on orders $49 and up
Sale - Save 20%
$ 56.99

This product was last offered at the strikethrough price on
05-02-2026

$ 45.59 USD
Free Shipping on orders $49 and up
Jaws swivel up to 90 degree in either direction and adjusts to 4 positions. Fits 2-1/4" to 4-3/4" (57mm to 120mm) filters.
Enthusiast Bundles - Corporate Logo
T#:35019973
Part#: 3907SCH01A2KT
Ships on Nov 3, 2026
Sale - Save 19% $ 99.99

This product was last offered at the strikethrough price on
05-05-2026

$ 81.37 USD
Free Shipping on orders $49 and up
Sale - Save 19%
$ 99.99

This product was last offered at the strikethrough price on
05-05-2026

$ 81.37 USD
Free Shipping on orders $49 and up

2-IN-1 CREEPER SEAT:

The Schwaben 2 in 1 Creeper Seat is a versatile tool designed to enhance convenience in various maintenance tasks. Easily switch from a creeper to a stool, providing flexible options for different work scenarios. As a creeper, it allows you to slide effortlessly under your vehicle, while as a stool, it offers a comfortable seating option for low-height work, reducing strain on your back and knees.

This creeper seat features a thick, padded seat with a large vinyl cushion that remains soft and supportive. The headrest ensures comfort during extended use, and the waterproof, oilproof surface makes cleaning easy. Equipped with six 360° universal casters, it moves smoothly across different surfaces. The ball-bearing casters are compression and wear-resistant, ensuring easy maneuverability.

Constructed from thickened tubular steel, the Schwaben 2-in-1 Creeper Seat supports up to 330 lbs (150 kg), providing a sturdy and reliable platform. In stool mode, the robust frame prevents deformation, rolling, or tilting, ensuring stability.

With a ground clearance of only 3 inches, this creeper seat allows access to narrow, low-clearance spaces, making it ideal for garages and repair shops. Enjoy the convenience of switching between a creeper and a stool, and experience improved comfort and efficiency in your maintenance projects.


Key Features:

  • Creeper/Stool All-in-One: Easily converts from a creeper to a stool for versatile maintenance tasks.
  • Heavy-Duty Construction: Supports up to 330 lbs (150 kg) with a thickened tubular steel frame; prevents deformation, rolling, or tilting in stool mode.
  • Smooth Movement: Six 360° universal casters ensure smooth and flexible movement on various surfaces; ball-bearing casters are compression and wear-resistant.
  • Low Ground Clearance: Only 3 inches, allowing access to narrow and low-clearance spaces, perfect for garages and repair shops.
  • Comfortable Padded Seat: Thick vinyl cushion with a headrest for extended use without fatigue; waterproof and oilproof for easy cleaning.
  • Enhanced Efficiency and Comfort: Reduces strain on the back and knees, making it ideal for both routine maintenance and complex repairs.


Includes:

  • 1 x Creeper Rear Frame
  • 1 x Creeper Middle Frame
  • 1 x Creeper Headrest
  • 6 x Swivel Casters
  • 6 x Washers
  • 4 x M8x55 Hex Head Bolts
  • 4 x M8 Lock Nuts


1/2" DRIVE METRIC SOCKET SET:

The Schwaben 1/2" Drive 6 Point Socket Set comprises a dozen 1/2" metric sockets, each featuring 6-point heads specially crafted for navigating those tricky, confined spaces.

Furthermore, our LIFETIME REPLACEMENT program provides you with added assurance, ensuring enduring performance and value. Improve your toolkit with the Schwaben 1/2" Drive 6 Point Socket Set and confidently tackle any task at hand.


Features:

  • Organized Storage: Included in the set is a practical sliding rail socket holder, helping you maintain a tidy and easily accessible socket arrangement.
  • Enhanced Grip: Knurled rings encircling the socket bodies ensure a secure hold, even when hands and sockets are covered in oil or grease, minimizing the risk of accidents.
  • Optimal Torque: The sockets are equipped with corner radii for superior torque distribution, safeguarding fasteners from damage and ensuring efficient performance.
  • High-Quality Material: Crafted from robust chrome vanadium steel (CR-V), these sockets offer superior wear resistance and toughness compared to high-speed steel, guaranteeing durability and extended lifespan.
  • Satin Chrome Finish: Not only do the sockets feature an attractive satin chrome finish, but they also provide excellent corrosion resistance, ensuring long-term quality.
  • Lifetime Replacement: Supported by our lifetime replacement program, this set delivers enduring value and peace of mind, making it a wise addition to your toolkit investment.


Includes:

  • 10 mm
  • 12 mm
  • 13 mm
  • 14 mm
  • 15 mm
  • 16 mm
  • 17 mm
  • 18 mm
  • 19 mm
  • 21 mm
  • 22 mm
  • 24 mm


WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

Show More Show Less


Bav Auto Tools - Corporate Logo
T#:580422
Part#: B8800115
In Stock
Sale - Save 5% $ 60.99

This product was last offered at the strikethrough price on
05-03-2026

$ 57.94 USD
Free Shipping on orders $49 and up
Sale - Save 5%
$ 60.99

This product was last offered at the strikethrough price on
05-03-2026

$ 57.94 USD
Free Shipping on orders $49 and up
This 5 piece kit consists of steel pry tools with rubber handles used for door and window repairs, mouldings, etc.
Schwaben - Corporate Logo
T#:366905
Part#: 011362SCH01AKT
In Stock
Sale - Save 3% $ 484.99

This product was last offered at the strikethrough price on
05-03-2026

$ 471.18 USD
Sale - Save 3%
$ 484.99

This product was last offered at the strikethrough price on
05-03-2026

$ 471.18 USD

Having a low profile floor jack can be a great asset for your garage, perfect for those with a lowered car as well as those that aren't. Most car owners with a lowered vehicle have been in the position of their floor jack not making the clearance needed, the low profile jack is the answer. 

  • Dual pump pistons raises the saddle to maximum height in only 5 pump strokes, with minimum effort.
  • Special low profile thick frame side plates and reinforced lift arm for added strength and use.
  • Wide track front wheels help provide chassis torsion control and durability.
  • Angular positioned pump pistons provide maximum effective pump stroke even when jack is completely under the vehicle.
  • Ball bearing mounted rear swivel caster wheels for easy maneuverability.
  • Side mounted handles for carrying and easy positioning.
  • Overload and bypass safety valve prevents jack overload and over extension.
  • Two piece quick release padded handle for storage or transport.

Details:

  • Jack Capacity 2 Ton
  • Max Lift Height 20"
  • Low Height 3.25"
  • Chassis Length 26.5"
  • Overall Width 13"
  • Saddle Diameter 4.5"
  • Handle Lenght 50"
  • Shipping Weight 50 lbs

The ultra light Schwaben jack stands only weigh 4.7 lbs each. Fit and finish on these stands just shows how much pride in workmanship goes into our stands.These stands are all aluminum construction with heavy-duty  flanged bases to safely stabilize loads. Features 6 locking positions for a secure load in multiple heights. The load pin is extra heavy duty at .584 in. diameter and features a posi lock ball to insure pin stays in place.  

Min. Height is 10.6".

Max Height is 15.4".

Large 7" diameter base.

Outer support tube is 2-1/8" in diameter.

Show More Show Less