BMW Brakes & Brake Parts for BMW 3 Series E46 (1999-2005)

Turner has developed a proprietary zinc-nickel coating finish with nearly twice the salt-spray corrosion resistance of a standard plating. Turner SS brake lines also feature new low profile connecting fittings, for a cleaner mounted look. Get the brake lines that will continue to look as good as they feel!

-Fully compliant with DOT Standards (MVSS-1006) -Lines burst-tested to 3000psi (maximum tested pressure from a BMW braking system is 1200psi) -Zinc-Nickel coating for maximum corrosion resistance -Low profile connectors for clean and recessed look

Turner has developed a new proprietary zinc-nickel coating finish with nearly twice the salt-spray corrosion resistance of a standard plating. Turner SS brake lines also feature new low profile connecting hardware, for a cleaner mounted look. Get the brake lines that will continue to look as good as they feel!

-Fully compliant with DOT Standards (MVSS-1006) -Lines burst-tested to 3000psi (maximum tested pressure from a BMW braking system is 1200psi) -Zinc-Nickel coating for maximum corrosion resistance -Low profile connectors for clean and recessed look

When replacing your worn out brakes, the market is flooded with performance options. If your BMW doesn't see track time, it's not very practical. Performance pads and rotors tend to result in a lack of bite at low braking temperatures and cause excessive noise in daily driven vehicles that becomes irritating. BMW brakes from the factory are perfectly suited for trips around town, across the country, and even the occasional spirited driving session, delivering smooth, quiet, and long lasting performance. 

Included in this E46 BMW brake package are all of the OEM equivalent components needed to replace your Front and Rear brakes with comfort, reliability, and optimal lifespan in mind.

Brake components in this kit:

• Pagid OEM Front & Rear Brake Pads
• Zimmerman Front & Rear Rotors
• New Front & Rear Wear Sensors
• Brand New Stainless Steel Set Screws
• Syl-Glide Silicone Brake Lubricant 

Fits the following BMWs:
1999-2006 E46 BMW 330i, 330Ci, 330xi

Turner has developed a supreme zinc-nickel coating finish with nearly twice the salt-spray corrosion resistance of a standard plating. Turner SS brake lines also feature new low profile connecting hardware, for a cleaner mounted look. Get the brake lines that will continue to look as good as they feel!

-Fully compliant with DOT Standards (MVSS-1006) -Lines burst-tested to 3000psi (maximum tested pressure from a BMW braking system is 1200psi) -Zinc-Nickel coating for maximum corrosion resistance -Low profile connectors for clean and recessed look

135/BMW Performance brakes for your E36 and E46! This kit uses the factory BMW Performance Brembo 6-piston calipers (same as 135i) with E46 330-sized rotors (325x25mm / 12.8") for a bolt on braking upgrade. Everything comes complete - 6-piston calipers, rotors, custom caliper bracket, brake lines, and a pad sensor. Choose your preferred brake fluid and brake pads below (or call us for a recommendation).

Brake rotor options -

• OEM Pagid Coated - blank rotors with anti-corrosion coating
• Turner/Centric cross-drilled
• Turner/Centric slotted
• Turner/Cetnric cross-drilled & slotted
• BMW Peformance floating and cross-drilled
• ECS 2-piece floating with cross-drilled and slotted

Brake pad options -

• OEM Textar (same as stock 135i)
• Centric Posi-Quiet - nearly dust-free (Turner preferred!)
• Hawk Ceramic nearly dust-free
• Hawk HPS performance
• StopTech performance

This is a direct fit to all E36 and E46 (not E46 M3) and comes with a lot more braking power than standard (especially on non-M E36). Consequently there will be more front brake bias - the front brakes have more bite than before. During normal street driving all you will notice is that the brakes feel stronger. For track driving we recommend a more aggressive rear pad to balance the brake bias or a StopTech or Brembo big brake kit that has been properly engineered for the chassis (not a retrofit).

Requires 17" wheels and wheel spacers may be required depending on wheel spoke design. E46 Style 68 wheels shown are used with 5mm spacer.

Click Here for E30 M3 Installation Instructions.
Click Here for E36 Installation Instructions.

We have Steering Rack Stops to fit the following BMWs:
1987-1991 E30 BMW M3
1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3

When replacing your worn out brakes, the market is flooded with performance options. If your BMW doesn't see track time, it's not very practical. Performance pads and rotors tend to result in a lack of bite at low braking temperatures and cause excessive noise in daily driven vehicles that becomes irritating. BMW brakes from the factory are perfectly suited for trips around town, across the country, and even the occasional spirited driving session, delivering smooth, quiet, and long lasting performance. 

Included in this E46 BMW brake package are all of the OEM equivalent components needed to replace your Front brakes with comfort, reliability, and optimal lifespan in mind.

Brake components in this kit:

• Pagid OEM Front Brake Pads
• Zimmerman Front Rotors
• New Front Wear Sensors
• Brand New Stainless Steel Set Screws
• Syl-Glide Silicone Brake Lubricant 

Fits the following BMWs:
1999-2006 E46 BMW 330i, 330Ci, 330xi

When replacing your worn out brakes, the market is flooded with performance options. If your BMW doesn't see track time, it's not very practical. Performance pads and rotors tend to result in a lack of bite at low braking temperatures and cause excessive noise in daily driven vehicles that becomes irritating. BMW brakes from the factory are perfectly suited for trips around town, across the country, and even the occasional spirited driving session, delivering smooth, quiet, and long lasting performance. 

Included in this E46 BMW brake package are all of the OEM equivalent components needed to replace your Front and Rear brakes with comfort, reliability, and optimal lifespan in mind.

Brake components in this kit:

• Pagid Front & Rear Brake Pads
• Zimmerman Front & Rear Rotors
• Brand New Front & Rear Wear Sensors
• Brand New Stainless Steel Set Screws
• Syl-Glide Silicone Brake Lubricant 

Fits the following BMWs:
E46 BMW 330xi

Turner Motorsport has made it easier than ever to get the high-quality upgrade components you need for your next brake service—all in a single, convenient kit. Our performance brake service kit includes premium ECS rotors, ECS EP24 "Enthusiast Performance pads, a wear sensor, assembly grease, and a full set of rotor set screws, ensuring a seamless upgrade process. Expertly assembled for perfect compatibility, this kit is designed to keep your braking system performing at its best.

Kit Includes:

ECS 2-Piece Semi-Floating Cross-Drilled & Slotted Rotors (Rear) Rear ECS EP24 "Enthusiast Performance" Brake Pads URO Pad Wear Sensor ECS Stainless Steel Rotor Set Screws AGS Brake Lubricant Compound Packet Upgrade your braking performance with precision-engineered components!