BMW Gaskets, Gasket Sets, Seals, & O-Rings for BMW 3 Series E46 (1999-2005)

Maintaining optimal engine oil levels is crucial for peak performance in your BMW. Leaks can occur between oil change intervals, leading to dangerously low oil levels. The valve cover is a frequent culprit for such leaks due to gasket degradation from years of exposure to temperature fluctuations. Replace your valve cover to ensure the retention of engine oil within your vehicle.

Key benefits of replacing the valve cover include:

• Preventing oil leaks that could lead to low oil levels.
• Preserving engine performance and longevity.
• Avoiding potential engine damage from insufficient oil.

Ensure your BMW's engine operates smoothly by replacing the valve cover to contain the engine oil effectively.

If there is a large amount of oil on the sides of the engine or if you can smell burning oil, chances are it's a bad valve cover gasket. The gasket fails and allows oil to seep down onto the side of the engine and other parts causing a mess and reducing the amount of oil in your engine. This replacement gasket from Elring is perfect to prevent any further oil leaks.

Includes the following Seals:

• Valve cover gasket
• Spark plug seals
• Nut seals
• Grommets

Elring is one of the biggest OEM names in the manufacturing of high quality gaskets that are available for very affordable prices. Elring has supplied many automotive names for years with the gaskets that seal your car's components from day 1 so you can rest assured that these components will last for a long time to come!

Fits the following BMW engines:
S54 3.2L

Elring Valve Cover Gasket Set – BMW P# 11129070990
Includes Outer Valve Cover Gasket, Spark Plug Tube Gaskets, and Cap Nut Grommets

Maintain proper engine sealing and eliminate common valve cover oil leaks with this complete Elring gasket set, trusted by professionals and enthusiasts alike. Designed for a precise fit on BMW engines, this kit includes everything needed for a comprehensive valve cover reseal:

Outer Valve Cover Gasket – Provides a tight seal between the cylinder head and valve cover

4 Spark Plug Tube Gaskets – Prevent oil from entering the spark plug wells and affecting ignition performance

15 Cap Nut Grommets – Replace worn grommets to restore proper bolt sealing and prevent oil seepage

Elring is a globally respected OE supplier, known for manufacturing gaskets that meet or exceed BMW’s factory specifications. Whether you're doing routine maintenance or addressing a visible oil leak, this kit ensures long-lasting results with no guesswork or missing pieces.

Fitment – Engineered for a direct replacement and worry-free installation on select BMW models.

Pro Tip: Always inspect the valve cover for cracks or warping before reinstalling. A clean sealing surface is critical for leak-free performance.

Includes the head gasket.

Sometimes you have to take the cylinder head off of your vehicle to diagnose problems, have it rebuilt, or replace a faulty head gasket. It tends to be a fairly labor intensive job, so anytime you can make it easier is definitely helpful.

When it comes time for reassembly, one of the biggest problems is finding quality gaskets and seals. Turner has your solution with this cylinder head gasket kit. With so many gaskets that are one use only to replace, getting them all done at the same time can be made harder by not having everything you need. With the proper, high quality gaskets, your reassembly will go much easier with no need for trip after trip to the local auto parts stores. Intake, exhaust, downpipe, valve cover, and in some applications valve seals will all help to get your engine into top condition.

When it's time to put everything back together, there are some things that should not be overlooked. Most cylinder head fasteners found on European automobiles are a one time use or stretch bolt. To be sure that everything is tightened down properly, it is important to replace them to get the proper torque reading and ensure the longevity of your repair.

Elring is one of the biggest OEM names in the manufacturing of high quality gaskets that are available for very affordable prices. Elring has supplied many automotive names for years with the gaskets that seal your car's components from day 1 so you can rest assured that these components will last for a long time to come!

High-Quality Valve Cover Replacement for BMW Vehicles

Ensure peak engine performance with this specially designed valve cover replacement crafted for BMW vehicles. Engineered to prevent oil leaks and maintain optimal oil levels between intervals, this valve cover is an indispensable safeguard for your engine.

• Prevents oil leaks and maintains optimal oil levels
• Durable materials ensure reliable protection against gasket degradation
• Safeguards the engine from potential damage due to oil leaks

Don't compromise on engine health. Replace your valve cover today to keep your BMW running smoothly and efficiently.

The head gasket is exposed to high pressure and heat for extremely long periods of time. Over a long period of time, these may develop a slight oil leak and must be replaced ASAP to prevent damage to the engine. It should also be replaced any time that the engine head is removed to ensure the best seal possible.

Elring is one of the biggest OEM names in the manufacturing of high quality gaskets that are available for very affordable prices. Elring has supplied many automotive names for years with the gaskets that seal your car's components from day 1 so you can rest assured that these components will last for a long time to come!

Fits the following BMW engines:
M52 2.5L 2.8L, M54 2.5L 3.0L

If the throttle body gasket is leaking air, this could cause a vacuum issue that would cause poor engine operation. Whenever you remove your throttle body for any reason, replace the gasket with a new one to ensure a proper seal.

Elring is one of the biggest OEM names in the manufacturing of high quality gaskets that are available for very affordable prices. Elring has supplied many automotive names for years with the gaskets that seal your car's components from day 1 so you can rest assured that these components will last for a long time to come!

Fits the following BMW engines:
M54 2.5L
N73 6.0L (2 seals needed)

These o-rings need to be replaced any time that the fuel injectors are pulled. These have a habit of swelling and can tear or suffer other damage when being reinstalled or when removed. If the seal is not tight, this could lead to a fuel leak or worse.This Elring o-ring will ensure the seal is nice and tight

Elring is one of the biggest OEM names in the manufacturing of high quality gaskets that are available for very affordable prices. Elring has supplied many automotive names for years with the gaskets that seal your car's components from day 1 so you can rest assured that these components will last for a long time to come!

Fits the following BMW engines:
M50 M52 M54

1.5mm X 51mm Metric Buna-N 70 O-ring is the perfect sealing solution for various industrial applications. Made from high-quality Buna-N material, this O-ring provides reliable sealing performance, ensuring leak-free connections. With its metric sizing and 70 durometer hardness, it offers versatility and durability for a wide range of uses.

• High-quality Buna-N material
• Reliable sealing performance
• Metric sizing for versatility
• 70 durometer hardness for durability

If your VANOS system is leaking, replace the gasket to restore the tight seal. An oil leak here will cause a significant amount of oil to leak down the front of the engine and if isn't fixed, could potentially lead to issues with the VANOS system itself.

Elring is one of the biggest OEM names in the manufacturing of high quality gaskets that are available for very affordable prices. Elring has supplied many automotive names for years with the gaskets that seal your car's components from day 1 so you can rest assured that these components will last for a long time to come!

Fits these BMW engines:
S54 3.2L

Rubber seals are often hardened and damaged by excessive heat and constant temperature changes causing them to become brittle and crack or split. If your seal has split, replace it with a new Elring seal for long reliability and to prevent further problems.

Elring is one of the biggest OEM names in the manufacturing of high quality gaskets that are available for very affordable prices. Elring has supplied many automotive names for years with the gaskets that seal your car's components from day 1 so you can rest assured that these components will last for a long time to come!

Fits the following BMW engines:
M54 3.0L