BMW Cooling System Parts & Accessories for BMW 3 Series E46 (1999-2005)

When it comes time to replace your thermostat, be sure you have everything you need. This kit includes everything you need to replace your thermostat, including the thermostat.

Kit includes:

• Thermostat
• Thermostat O-Ring
• 1.5 Liters of coolant

This item fits the following BMWs: 
2001-2006 E46 BMW M3 

Due to weak rubber and plastic construction, vital cooling system parts are prone to premature failure. Key components, such as radiator hoses, the thermostat, and the expansion tank are particularly prone to cracks, leaks, and catastrophic failure, which can lead to overheating and potentially severe engine damage. Fortunately, our team of experts has assembled this kit of high-performance alternatives and high-quality OE replacement components, both tailored to safeguard your cooling system from failure and increase cooling system capability.

Our Level 3 High-Performance Cooling System Service Kit is the ultimate solution for ensuring long-term reliability and enhanced cooling performance. Each component in this comprehensive kit has been carefully selected by our team of enthusiasts to address common failure points and provide a robust, performance-oriented upgrade for your vehicle. By replacing aging factory parts with premium, high-performance alternatives, you’ll optimize cooling efficiency and safeguard your engine from the stress of overheating.

Our all-inclusive "Level 3" High-Performance Cooling System Service Kit includes:

CSFxTurner Performance Triple-Pass Aluminum Radiator Turner Motorsport Heavy Duty Aluminum Expansion Tank ECS Silicone Radiator Hoses ECS Aluminum Water Pump Pulley Wahler Thermostat (80°C) Bremmen Aluminum Water Pump Bremmen Parts Auxiliary Fan Switch Continental Accessory Belt ECS Kevlar-Reinforced A/C Compressor Drive Belt Genuine BMW Water Pump O-Ring Genuine BMW Water Pump Bolts Genuine BMW G48 Antifreeze (1 Gallon) Redline Water Wetter Performance Coolant Additive (12 oz.)

Just like the rest of your vehicle's major systems, the cooling system must also be addressed periodically to ensure proper cooling and component reliability. Plastic and rubber components become brittle and prone to splitting or cracking after long periods of heating and cooling cycles, especially in colder climates! The coolant itself can degrade or become contaminated, leading to potential corrosion or freezing issues. Finally, thermostats and sensors can fail completely, preventing proper cooling and/or coolant temperature readings to become inaccurate.

To make sure you are not left stranded on the side of the road with an overheated engine, we have put together this Basic Cooling System Service kit. This kit contains all of the most-likely-to-fail components, giving you peace of mind knowing your engine will continue to run cool for another 60,000+ miles.

See kit contents below for all included components.

As the E46 M3 gets on in years and mileage, the cooling system will be one of the areas that needs the most attention. We have packaged all of the major cooling components into one overhaul kit:

• radiator
• water pump
• thermostat
• radiator hoses and clamps
• gaskets and o-rings

We have found that the E46 M3 can develop inconvenient cooling issues, even on daily driven street cars. While the infamous radiator and water pump failures of the E36 are a thing of the past, the E46 M3 still has its own complications. The best approach to avoid bigger problems is preventative maintenance. We recommend replacing the water pump before 80,000 miles and the radiator before 100,000 miles. By addressing these problem areas before a failure, you will save yourself a larger repair bill in the future.

In addition to the standard cooling package items above, there are several other cooling-related components that may make sense to do at the same time:

• Original BMW coolant
• fan clutch
• main serpentine belt and A/C belt
• Turner Power Pulley Kit (because now is the perfect time!)

This cooling overhaul package fits:
2001-2006 E46 BMW M3
 

This is a compete cooling system overhaul kit, which includes all the common cooling system failure parts bundled into a complete package. This cooling system package is for the E46 with the M52/54 engine.  

A failure in the cooling system can lead to overheating and catastrophic engine failure. Don't gamble your engine! By replacing these core items preventatively, such as the thermostat housing, radiator, and waterpump, you are defusing what could be a ticking cooling system time bomb. And if you've had a failure of one of these parts, now is the time to refresh your entire cooling system. Keep on top of the cooling needs of your engine for your own piece of mind. Potential buyers also see the upside of a properly maintained car with receipts. 

This cooling system overhaul kit fits the following BMWs: 
1999-2000 E46 3 Series Sedan/Wagon - 323i & 328i 
1999-2000 E46 3 Series Coupe/Convertible - 323Ci & 328Ci 
2001-2002 E46 3 Series Sedan/Wagon - 325i, 325xi, 330i, 330xi 
2001-2002 E46 3 Series Coupe/Convertible - 325Ci, 330Ci 

If you plan to drive your BMW aggressively on the track, it is important that you upgrade your cooling system to avoid overheating. To ensure your BMW keeps cool on the track, we have built out our new High Performance Cooling System Upgrade kits. Featured in this kit is everything you will need to redo your cooling system from top to bottom with OEM components, with select stock components swapped out for the high performance alternative! This kit includes a high performance Mishimoto Radiator, for significantly better cooling than the stock radiator and full aluminum construction that won't crack from long term heat cycling, a performance Mishimoto 70*C thermostat, for lower temperature operation and increased cooling of the engine, and a Stewart High Performance Water Pump, for dramatically increased coolant flow at all RPMs. 

Additional items included in this kit:

• OEM Replacement Coolant Hoses
• OEM Expansion Tank, Cap, and Level Sensor
• OEM Belts, Tensioners, and Pulleys
• OEM Auxiliary Fan Switch
• Genuine BMW Hardware for Easy Installation
• ECS Tuning Aluminum Water Pump Pulley - For increased reliability over the stock composite pulley

Due to weak rubber and plastic construction, vital cooling system parts are prone to premature failure. Key components, such as radiator hoses, the thermostat, and the expansion tank are particularly prone to cracks, leaks, and catastrophic failure, which can lead to overheating and potentially severe engine damage. Fortunately, our team of experts has assembled this kit of high-performance alternatives and high-quality OE replacement components, both tailored to safeguard your cooling system from failure and increase cooling system capability.

The Turner Motorsport Level 1 Performance Cooling System Refresh Kit is the ultimate solution for ensuring long-term reliability and enhanced cooling performance. Each component in this comprehensive kit has been carefully selected by our team of enthusiasts to address common failure points and provide a robust, performance-oriented upgrade for your vehicle. By replacing aging factory parts with premium, high-performance alternatives, you’ll optimize cooling efficiency and safeguard your engine from the stress of overheating.

Our comprehensive "Level 1" High-Performance Cooling System Service Kit includes:

Turner Motorsport Heavy Duty Aluminum Expansion Tank ECS Silicone Radiator Hoses Wahler Thermostat (80°C) Bremmen Aluminum Water Pump Bremmen Parts Auxiliary Fan Switch Genuine BMW Water Pump O-Ring Genuine BMW G48 Antifreeze (1 Gallon) Redline Water Wetter Performance Coolant Additive (12 oz.)

Replace the flimsy plastic bleeder screw used in the coolant expansion tank or in one of the cooling system hoses with this high quality, durable, aluminum bleeder screw. The stock plastic screw can deform over time due to heat or even regular use. We have even seen the head of the screw snap off, leaving the threaded body stuck in the expansion tank. This aluminum screw will help to prevent sudden failure of the bleeder screw, which can result in immediate overheating of the car.

ECS Tuning's Aluminum Coolant Bleeder Screw replaces Genuine BMW Part Number 17111712788

BMW E46 M54 AAF Low Temp Thermostat Kit - Partial is an essential upgrade for enthusiasts looking to optimize engine performance and reliability. Developed by Advanced Auto Fabrication (AAF), this kit addresses the limitations of the factory M54 thermostat, which maintains a temperature range of 80-103°C and opens the mechanical failsafe at 110°C. For race conditions where maintaining a lower temperature is crucial, this kit replaces the stock electronic thermostat with a manual unit, allowing the engine to run at a safer and more efficient temperature. This upgrade not only enhances engine longevity but also reduces stress from high-temperature operation, minimizes heat soak, and increases power.

• Optimal Temperature Control: Replaces the factory thermostat for improved engine temperature management.
• Enhanced Engine Longevity: Operates at safer temperatures, reducing stress and extending engine life.
• Increased Power: Lower operating temperatures can lead to better engine performance.
• Reduced Heat Soak: Helps prevent overheating and ensures efficient cooling.
• Improved Reliability: Manual thermostat unit offers more consistent performance in racing conditions.

Partial Kit Contents:

• Thermostat housing plate
• Thermostat
• Installation hardware

The ECS Exact-fit water line is a perfect upgrade if you're tired of dealing with brittle failure prone parts under your hood. The reinforced fluorosilicone hose has been pre-formed to route the same way your stock line did so you can maintain that clean factory installed appearance. Upgrading the line fitting with a billet aluminum piece eliminates the failure prone plastic fitting giving your cooling system strength.

Included:

Aluminum fitting

• Material: 6061-T6 Aluminum - MIL-A-8625F Type II Class 2 black anodized for superior corrosion resistance and strength
• Single-piece design avoiding additional interfaces that may cause leaks
• Matches OEM style connection to upper coolant hose

Silicone hose

• Material: Black Reinforced Fluorosilicone Lined Coolant Safe Silicone
• Pre-formed hose to ensure OEM style routing and appearance
• Can maintain the use of your stock retaining clips to route the hose in identical locations (due to slight variations in silicone the retainer on the expansion tank may not fit)
• Pressure tested to ensure 2X operating pressures to ensure reliability

Ensure a tight and leak-free seal in your BMW's cooling, vacuum, or intake systems by installing a new adjustable hose clamp. Over time, clamps can deform or lose their tightness due to aging or frequent removal, potentially causing leaks in your coolant or vacuum hoses. Avoid the risk of leaks by replacing old clamps with new hardware, offering peace of mind against coolant and vacuum system issues.

Key benefits of the adjustable hose clamp include:

• Maintaining a secure and leak-free seal in your BMW's systems.
• Preventing coolant or vacuum leaks that can affect performance.
• Adjustable size from 70mm to 78mm for versatile applications.

Upgrade your hose clamps to ensure optimal performance and reliability in your BMW's systems.