BMW Cooling System Parts & Accessories for BMW X Series E53 (2000-2006)

Our Turner Motorsport's full aluminum expansion tank was designed and engineered in house to help with the weak point in your E46 cooling system. The coolant expansion tank goes through heat cycles over and over again from regular driving, it is important that your expansion tank is doing its job to retain coolant to keep your engine operating temperatures down and keep your engine bay clean. Not only is this a major upgrade but also a great maintenance item to replace. Our expansion tank was designed to fit the OEM hoses for an easy install and comes with all the upgraded items you will need for a clean install.

If your BMW needs a new expansion tank, make sure this is the last expansion tank you ever need to buy. Our coolant expansion tank has a full aluminum construction and wrinkle black powder coat for durability. Expansion tank kit comes with all the accessories you need to replace your expansion tank once, and never have to worry about it again.

Product Features:

Maintains stock coolant capacity and expansion volume
Designed to maintain OE coolant elevation, preventing air pockets
Baffled tank ensures that air pockets cannot be introduced during aggressive driving and provides accurate coolant level reading
Carefully designed bleed passage prevents the introduction of air as the engine cools
Turner engraved internal fill level
TIG welded 5052 aluminum construction
All bungs are machined to fit factory hose ends
Kit contents:

Turner Aluminum Expansion Tank
Coolant level sensor
Expansion tank cap
Flared coolant pressure release line
Hardware for installation
Product Development:

Turner expansion tanks are designed, engineered, tested and quality inspected by our Research and Development team at Turner. Nothing but the highest level of precision and quality through leading-edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer and rigorous long term product testing.

Just like the rest of your vehicle's major systems, the cooling system must also be addressed periodically to ensure proper cooling and component reliability. Plastic and rubber components become brittle and prone to splitting or cracking after long periods of heating and cooling cycles, especially in colder climates! The coolant itself can degrade or become contaminated, leading to potential corrosion or freezing issues. Finally, thermostats and sensors can fail completely, preventing proper cooling and/or coolant temperature readings to become inaccurate.

To make sure you are not left stranded on the side of the road with an overheated engine, we have put together this Basic Cooling System Service kit. This kit contains all of the most-likely-to-fail components, giving you peace of mind knowing your engine will continue to run cool for another 60,000+ miles.

See kit contents below for all included components.

This is a compete cooling system overhaul kit, which includes all the common cooling system failure parts bundled into a complete package. This cooling system package is for the E53 with the M54 engine. 

A failure in the cooling system can lead to overheating and catastrophic engine failure. Don't gamble your engine! By replacing these core items preventatively, such as the thermostat housing, radiator, and waterpump, you are defusing what could be a ticking cooling system time bomb. And if you've had a failure of one of these parts, now is the time to refresh your entire cooling system. Keep on top of the cooling needs of your engine for your own piece of mind. Potential buyers also see the upside of a properly maintained car with receipts. 

This kit fits the following BMWs:

2000 - 0/2002 - E53 3.0i with manual transmission 

This is a compete cooling system overhaul kit, which includes all the common cooling system failure parts bundled into a complete package. This cooling system package is for the E53 with the M54 engine. 

A failure in the cooling system can lead to overheating and catastrophic engine failure. Don't gamble your engine! By replacing these core items preventatively, such as the thermostat housing, radiator, and waterpump, you are defusing what could be a ticking cooling system time bomb. And if you've had a failure of one of these parts, now is the time to refresh your entire cooling system. Keep on top of the cooling needs of your engine for your own piece of mind. Potential buyers also see the upside of a properly maintained car with receipts. 

This kit fits the following BMWs:

09/2002 - 2006 - E53 3.0i with manual transmission 

Replace the flimsy plastic bleeder screw used in the coolant expansion tank or in one of the cooling system hoses with this high quality, durable, aluminum bleeder screw. The stock plastic screw can deform over time due to heat or even regular use. We have even seen the head of the screw snap off, leaving the threaded body stuck in the expansion tank. This aluminum screw will help to prevent sudden failure of the bleeder screw, which can result in immediate overheating of the car.

ECS Tuning's Aluminum Coolant Bleeder Screw replaces Genuine BMW Part Number 17111712788

Ensure a tight and leak-free seal in your BMW's cooling, vacuum, or intake systems by installing a new adjustable hose clamp. Over time, clamps can deform or lose their tightness due to aging or frequent removal, potentially causing leaks in your coolant or vacuum hoses. Avoid the risk of leaks by replacing old clamps with new hardware, offering peace of mind against coolant and vacuum system issues.

Key benefits of the adjustable hose clamp include:

• Maintaining a secure and leak-free seal in your BMW's systems.
• Preventing coolant or vacuum leaks that can affect performance.
• Adjustable size from 70mm to 78mm for versatile applications.

Upgrade your hose clamps to ensure optimal performance and reliability in your BMW's systems.

Schwaben Locking Hose Pinch-Off Pliers have adequate clamping force to effectively seal large or pressurized cooling system hoses. These pliers are ideal for clamping shut most hoses, ensuring reliability in your automotive tasks. With swivel jaws, they provide even clamping force, making them a versatile tool for various applications.

• Adequate clamping force for large or pressurized hoses
• Ideal for clamping shut most hoses
• Swivel jaws ensure even clamping force
• Versatile tool for automotive maintenance

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. For more information, visit http://www.p65warnings.ca.gov.

Replace your cracked or leaking radiator hose to prevent further leaks and potentially catastrophic failure.

This item fits the following BMWs: 
2000-2003 E53 BMW X5 4.4i 4.6is

Replace your cracked or leaking radiator hose to prevent further leaks and potentially catastrophic failure.

Fits the following BMWs:
2003+ E53 BMW X5 N62 4.4L 4.8L

Replace your cracked or leaking radiator hose to prevent further leaks and potentially catastrophic failure.

This item fits the following BMWs: 
2000-2003 E53 BMW X5 4.4i 4.6is