This caliper bushing kit will eliminate flex caused by weak rubber caliper bushings. As the brake pedal is pressed the caliper grabs the rotor and twists on its mounting bushings. The rubber bushings allow the caliper to deflect and twist which affects pedal feel and results in uneven pad wear. These solid brass bushings will not twist or deflect so your calipers can squeeze the pads evenly on both sides of the rotor (sort of like what multi-piston big brakes do). This will give you much longer pad life and a more consistent pedal feel. This is the most complete kit we have ever sold with stainless steel caliper slide bolts, o-rings, and new dust boots. Unlike other kits, these bushings are pressed into the caliper and will not shift or slide on their own.

Installation is straightforward: remove the old rubber bushings and press in the new brass bushings (we recommend special tool 003326ECS03). High temp caliper grease or anti-seize is required. The new bushings include an inner o-ring that helps trap grease on the slide bolt, reducing friction and wear.

***Click here for installation instructions*** 

***Click here for the installation tool***

For most models with floating calipers. Fits the rear of E90/2 and E60, but for the front you'll need the kit found here. Does not fit E30 models with Girling calipers, but is compatible with Ate calipers. 

This caliper bushing kit will eliminate flex caused by weak rubber caliper bushings. As the brake pedal is pressed the caliper grabs the rotor and twists on its mounting bushings. The rubber bushings allow the caliper to deflect and twist which affects pedal feel and results in uneven pad wear. These solid brass bushings will not twist or deflect so your calipers can squeeze the pads evenly on both sides of the rotor (sort of like what multi-piston big brakes do). This will give you much longer pad life and a more consistent pedal feel. This is the most complete kit we have ever sold with stainless steel caliper slide bolts, o-rings, and new dust boots. Unlike other kits, these bushings are pressed into the caliper and will not shift or slide on their own.

Installation is straightforward: remove the old rubber bushings and press in the new brass bushings (we recommend special tool 003326ECS03). High temp caliper grease or anti-seize is required. The new bushings include an inner o-ring that helps trap grease on the slide bolt, reducing friction and wear.

***Click here for installation instructions*** 

***Click here for the installation tool***

For front calipers on E90/2 and E60. For rear calipers and all caliper on other models, click here. 

Enhance your BMW's wheel changing process with a stud conversion kit, facilitating faster and more convenient wheel swaps. This kit includes 20 Conical Seat Lug Nuts and 20 78mm Wheel Studs, offering a permanent wheel-hanging solution that saves time and hassle. By screwing in the provided studs, you'll be ready to go without complexities.

Product Benefits:

• Permanent wheel-hanging solution
• Saves time and hassle during wheel changes
• Versatile use with spacers of up to 30mm
• Facilitates easier wheel installation
• Reduces wear on wheel hubs

Note: Thread-locking compound is recommended during installation. Studs should be torqued to 15Nm.

Ultimate ECS Tow Hook Mount License Plate Kit: Enhance Your BMW's Appearance

• Provides a sleek and secure mounting solution for the front license plate
• Prevents drilling into the bumper, preserving the vehicle's aesthetics
• Adjustable design fits a wide range of BMW models
• Easy to install with included hardware

Upgrade your BMW's appearance with the Ultimate ECS Tow Hook Mount License Plate Kit. This kit offers a sleek and secure mounting solution for the front license plate, preventing the need for drilling into the bumper and preserving the vehicle's aesthetics. The adjustable design ensures compatibility with a wide range of BMW models, making it a versatile choice for BMW enthusiasts. Installation is easy with the included hardware, allowing you to enhance your BMW's appearance in no time.

Carbon Fiber UNIVERSAL Swivel Exhaust Tips - 4.0" - Pair are designed to provide a stunning, adjustable upgrade for any vehicle. These high-quality exhaust tips feature a unique swivel collar design, allowing them to be adjusted in any direction for the perfect fitment. Simply position the tip to your desired angle and secure it with a hex bolt tightened to 14 ft-lbs (19 Nm), ensuring it stays in place.

• Customizable Fitment: The swivel collar design allows for versatile adjustment, ensuring a perfect alignment with your vehicle's exhaust system.
• Premium Materials: Constructed with single wall stainless steel and a rolled carbon fiber edge for a high-end look and durability.
• Durable Construction: Includes chrome-plated nuts, 304SS cap screw, clamp, and insert ring for long-lasting performance.
• Sleek Appearance: Features a slant cut and matte clear coated ECS Tuning vinyl logo for a stylish finish.
• Universal Fitment: Designed to fit various vehicles; modification may be required for proper fitment.

Dimensions:

• Inlet Size: 2.5"
• Overall Length: 6.0" (5.0" Tip + 1.0" Clamping Surface)
• Outlet Size: 4.0"
• Outlet Style: Single Wall Stainless, Rolled Carbon Edge, Slant Cut
• Sold as a Pair: Includes 2 tips.

Unsure of what size spacer will work best for you? This professional kit includes 1mm, 2.5mm, 5mm, 10mm, and 15mm spacers with wheel studs and nuts for you play with. These are not the same spacers that we sell and they cannot be used to drive on. But with the studs installed the car can be lowered to the ground and rolled to check for clearances. These test fit spacers are drilled to fit the standard BMW 5x120 bolt pattern as well as 4-lug 4x100 (and VW/Audi bolt patterns too). You can stack spacers to achieve the perfect clearance. When you're ready call us to order the spacers you need (Turner spacers come in 3mm, 5mm, 7.5mm, 10mm, 12.5mm, 15mm, 17.5mm, 20mm, 25mm, and 30mm spacer thicknesses).

These spacers are not for driving on. They lack the hubcentric lip that BMW wheels are designed to work with. Driving on studs alone will lead to a failure.

Two ways to buy -

• Own. Just as it says, you buy this kit to own. Perfect for shops or race teams that change wheels or brake components often. For shops you can measure wheel clearance and order the correct spacers the first time around (no wasting inventory or paying return shipping). Note: Kits purchased to Own are not returnable for refunds.
• Rent. Pay the full price but get $110 as a store credit when you return the kit. We keep a modest $19.95 fee for the service. Perfect for DIY and enthusiasts who only need the Test Kit once. Use your store credit to purchase your spacers (or anything else from our catalog).

Wheel Spacer FAQ:
How to measure for wheel spacers
Wheel spacer encyclopedia

Elevate your vehicle's appearance with the ECS Tuning "Ti.22" Titanium Exhaust Tips! These tips, featuring a burnt-titanium-edge finish, showcase a slant cut, single wall outlet design, offering a visually stunning look. Crafted for durability, they include chrome-plated nuts, a 304SS cap screw, and clamp for a secure fit.

Key Specifications:

• Inlet Size: 2.5"
• Overall Length: 6.0" (4.5" Tip + 1.25" Clamping Surface)
• Outlet Size: 4.0"
• Outlet Style: Single Wall, Slant Cut

Note: Modification might be necessary for proper fitment. This part offers UNIVERSAL fitment and may require measurement prior to ordering to ensure compatibility with your vehicle.

Transform Your BMW's Exhaust with ECS UNIVERSAL Exhaust Tips - 4.0" Titanium - Matte Finish - Pair

• Enhances the appearance of the exhaust system
• Made from high-quality titanium for durability
• Matte finish adds a sleek and modern touch
• Universal fit for various BMW models

Upgrade your BMW's exhaust system with ECS UNIVERSAL Exhaust Tips - 4.0" Titanium - Matte Finish - Pair. Crafted from high-quality titanium, these exhaust tips not only enhance the appearance of your vehicle's exhaust system but also ensure durability for long-lasting performance. The matte finish adds a sleek and modern touch to your BMW's aesthetic. Designed with a universal fit, these exhaust tips are compatible with various BMW models, offering versatility and ease of installation.

Upgrade your BMW's suspension with ECS Tuning Adjustable Sway Bar End Links, designed to provide up to 60mm (2.36") of adjustability. These end links allow you to eliminate sway bar preload or fine-tune it for specific racing needs and corner balancing. When installed, they improve drivetrain clearance and enhance sway bar responsiveness by reducing deflection, ensuring superior handling. Perfect for lowered vehicles using springs, coilovers, or air-ride suspension systems, these adjustable sway bar end links allow you to remove unwanted preload caused by changes in the center-to-center distance between sway bar mounting points. By adjusting the end links to a neutral position, you eliminate sway bar preload, enhancing suspension performance in various driving conditions.

The main body of the ECS Sway Bar End Links is crafted from strong, lightweight 6061-T6 billet aluminum and anodized red for superior corrosion resistance. Featuring left and right-hand threaded center sections and machined hex wrench fittings, these end links allow for quick and easy on-the-car adjustments. Zinc-plated hardware ensures secure and lasting adjustments, while the heavy-duty ball joint ends come with weather-resistant rubber boots and stainless steel wire retainers, providing superior protection against salt, rain, and ozone for extended durability. Each kit also includes zinc-plated Nyloc nuts and hardened steel washers for secure installation and improved contact surface on the sway bar.

These end links are designed, engineered, and rigorously tested by ECS Tuning to ensure the highest quality. Whether you have a lowered or stock suspension, these adjustable sway bar end links are the perfect upgrade, offering a high-quality, heavy-duty replacement that fits your specific needs.

Features:

Range of Adjustment: 255mm (10") to 315mm (12.4") 6061-T6 Billet Aluminum Construction: Red anodized for superior corrosion resistance Zinc-Plated Hardware: Provides durability and superior corrosion protection Right and Left-Hand Threaded Center Sections: Quick and simple on-the-car adjustments Heavy-Duty Ball Joints (M10x1.5): Weather-resistant rubber boots and stainless steel wire retainers for long-lasting durability NOTE: If you've modified your vehicle's suspension with aftermarket struts or coilovers, the mounting location for the sway bar end link may have moved. To confirm fitment with our adjustable end links, please measure the distance between the sway bar and the mounting location on the strut body with the vehicle at ride height and confirm that it is within the 255 mm - 315mm range of adjustment.

Upgrade the wheel setup of your BMW with the BMW Wheel Stud Conversion Kit - Half set. This high-quality conversion kit allows you to replace your existing wheel bolts with wheel studs, providing easier wheel installation and improved stability. Engineered specifically for BMW models, this kit includes everything you need for a half-set conversion. Enhance the performance and convenience of your BMW with this premium wheel stud conversion kit.

• Easier wheel installation compared to traditional bolts
• Improved stability and safety with wheel studs
• Engineered specifically for BMW models
• Includes everything needed for a half-set conversion

Wheel Stud Conversion Kit - Half Set: Enhance Your BMW's Performance

• Allows for easier and quicker wheel changes
• Provides a more secure and reliable wheel mounting solution
• Reduces the risk of stripped lug bolts
• Compatible with various BMW models

Upgrade the performance of your BMW with the Wheel Stud Conversion Kit - Half Set. This kit allows for easier and quicker wheel changes, providing a more secure and reliable wheel mounting solution compared to traditional lug bolts. With reduced risk of stripped lug bolts, you can enjoy peace of mind while driving your BMW. Plus, the kit is compatible with various BMW models, ensuring versatility and ease of installation.