BMW 1 Series E82 (2008-2013)

Upgrade to wheel studs from bolts for an enhanced connection and easier wheel installation. Racing entities often require wheel studs for better wheel-to-hub contact, offering improved confidence during high-speed performance. Turner Motorsport's wheel studs are designed to accommodate various spacer widths effortlessly, simplifying the setup process. Discover why this switch from bolts to studs can make a significant difference:

• Simplifies spacer usage with a single application designed for various spacer widths
• Wheel studs act as a wheel hanger, easing wheel installation
• Reduces constant wheel bolt removal, minimizing wear on wheel hubs
• Facilitates quick and easy tire changes as the studs stay in the hub
• Recommended torque of 15Nm with thread-locking compound during installation
• Compatible with spacers up to 20mm in size

Replace the flimsy plastic bleeder screw used in the coolant expansion tank or in one of the cooling system hoses with this high quality, durable, aluminum bleeder screw. The stock plastic screw can deform over time due to heat or even regular use. We have even seen the head of the screw snap off, leaving the threaded body stuck in the expansion tank. This aluminum screw will help to prevent sudden failure of the bleeder screw, which can result in immediate overheating of the car.

ECS Tuning's Aluminum Coolant Bleeder Screw replaces Genuine BMW Part Number 17111712788

If you're experiencing hard starting, flaky charging, or other electrical issues, your engine ground strap may be the culprit. On E9X BMWs, the engine ground strap is a thin, non-insulated cable that spans from the left engine mount arm to the frame horn. Despite the seemingly simple nature of this part, on older cars, it is known to cause massive headaches. Due to its non-insulated design, years of exposure to water, dirt, and road salt will cause the wire to corrode, ultimately leading to complete failure. A break in this cable will cause an open circuit, resulting in issues with the vehicle's electrical system and potentially leading to a no-start condition.

To solve this issue, ECS has engineered an exact-fit, upgraded ground strap for your E9X BMW! Unlike its OEM counterpart, this design features insulated, large-gauge copper wire for dependable conductivity and long-lasting durability. Additionally, factory-style lugs are zinc-coated, crimped, and soldered, ensuring protection against corrosion and oxidation.

Whether you're replacing a visibly corroded strap or proactively preventing failure, this solution from ECS is sure to provide lasting performance and protection.

FEATURES

Direct-fit replacement and upgrade for RWD E82/E88, E84, and E9X applications Solves intermittent grounding issues caused by aging OEM straps Clean, stealthy design that fits seamlessly in factory engine bays Factory length and lug orientation for drop-in fitment 2 AWG tinned copper cable for excellent conductivity and corrosion resistance Zinc-coated lugs, crimped and soldered to resist moisture and oxidation Black UL1015-grade insulation withstands oil, heat, and abrasion Discreet ECS label for a clean, OEM+ look Replaces OEM part numbers 12427549393, 12427795404, and 12427790559.

Elevate your custom installation with the ECS -10AN O-Ring Boss fitting, a crucial component that connects your ECS Tuning Catch Can to a 3/4" ID hose. This fitting simplifies your plumbing setup, ensuring a seamless solution.

Featuring a pre-installed Viton O-ring, this fitting is engineered for excellence, providing a leak-proof seal that resists the effects of oil and fuel exposure, guaranteeing long-term durability.

The 3/4" nipple is thoughtfully designed with barbs to secure hose position effectively, minimizing the risk of hose disconnection. Keep in mind that clamps and hoses are available for separate purchase. These fittings are sold individually, with most installations requiring a pair of them.

Ensure your driving machine's peak performance with regular maintenance. Turner Motorsport offers a comprehensive service kit to keep your BMW in top shape. With varying oil change intervals based on driving habits, this kit includes:

• Seven Liters of BMW Synthetic Engine Oil
• Engine Oil Filter
• Oil Drain Plug Gasket (Included with filter kit)

For optimal results, we recommend an oil change every 10,000 miles, or every 5,000 miles for aggressive or city driving. Trust Turner Motorsport to provide the quality and precision your BMW deserves.

Drastically improve the looks of your vehicle while improving your vehicle's handling characteristics and/or easily adjust your wheel fitment to allow for the proper clearance when installing parts such as new wheels, big brake kits, or lowering suspension components.Interference from components such as shocks, springs, or control arms are a common issue when installing wheel that are not a direct OE size replacement. By moving your wheels a few millimeters each, you can give yourself enough clearance for proper wheel fitment and give your car a wider stance in the process.

ECS Tuning wheel spacers are constructed of high quality 6061-T6 aircraft grade aluminum and are specifically designed by in-house engineers and cnc machined to exact standards, ensuring the best fitment possible. By carefully measuring the OEM wheel hubs and bore dimensions, these spacers mount with minimal clearance to prevent any vibration, retaining the stock-like vibration free operation. 

This kit includes wheel bolts that are lab tested to meet or exceed ISO 898 class 10.9 mechanical and physical properties to ensure perfect fastening of the wheel to the hub with no issues or potential to snap under aggressive driving conditions.

ECS Tuning is a performance and genuine parts provider that designs their ECS Tuning branded aftermarket automotive parts in-house to ensure the highest quality and affordability possible. Every part's design is subjected to a rigorous test fit and stress test period to guarantee proper fitment and continued reliability for years to come.

In some cases, the OEM hub flange extends farther than the thickness of the spacer. This creates a need for a larger chamfer on the spacer for adequate wall thickness. ECS's 10mm spacer is designed to be compatible with OEM wheels; however, in some instances, it is incompatible with certain aftermarket wheel options. A simple fix is to switch to either an 8mm or 12.5mm spacer.

This item fits the following BMWs:

2008-2012 E82 BMW 128i 135 1M
1988-1991 E30 BMW M3
1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2012 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe
2007-2012 E93 BMW 328i 335i M3 - Convertible
1982-1988 E28 BMW 524td 528e 533i 535i 535is M5
1989-1995 E34 BMW 525i 530i 535i 540i M5
2004-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive 535i 535xi 535i xDrive 545i 550i M5
1982-1989 E24 BMW 633csi 635csi M6
2004-2010 E63 BMW 645ci 650i M6
1981-1987 E23 BMW 733i 735i
1988-1994 E32 BMW 735i 735il 740i 740il 750il
1995-2001 E38 BMW 740i 740il 750il
1990-1999 E31 BMW 840i 840ci 850i 850ci 850csi
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe
2009-2016 Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is

The ECS Tuning Center Support Bearing Brace is engineered to improve drivetrain performance and longevity. The factory center support bearing features internal an internal rubber bushing to reduce NVH (noise, vibration, and harshness) transmission to the cabin. Unfortunately, this material choice falls short when it comes to performance applications. Under extreme load conditions, this bushing is prone to flexing, resulting in driveshaft misalignment. To address the shortcomings of the factory rubber center support carrier design, ECS engineers developed a set of precision-fit, split polyurethane bushings that secure tightly around the existing driveshaft bearing. Constructed from 90A durometer polyurethane, this material eliminates bushing deflection while maintaining minimal noise, vibration, and harshness (NVH). By eliminating deflection, this innovative solution not only improves durability but also ensures a significantly longer service life than the OEM center support bearing—making it an excellent upgrade for aging BMW chassis.

The polyurethane bushings are surrounded by a robust 6061-T6 billet aluminum bracket designed with strength and reliability in-mind. This bracket features a split design for hassle-free installation, eliminating the need to remove the driveshaft assembly entirely. To install the ECS Center Support Carrier, simply cut around your existing bearing, remove the factory brace, and clamp on your new bushings and bracket. This user-friendly approach saves time and simplifies maintenance or upgrades. Two stainless steel socket head screws are used to fasten the two-piece bracket, offering corrosion resistance and secure clamping under high torque and stress. This combination of materials and design ensures dependable performance and long-lasting durability, even in demanding applications.

Features & Benefits:

Performance-Designed Bushing Upgrade: 90A durometer polyurethane is used to eliminate bushing deflection while maintaining a smooth, quiet ride. Improved Longevity: Polyurethane construction offers a longer lifespan than factory rubber, ideal for enthusiasts looking to eliminate future CSB-related problems. Billet Aluminum Bracket: The upgraded bushings are encased in a 6061-T6 billet aluminum bracket for enhanced durability and improved performance. Easy Installation: Both the bushings and the bracket feature a two-piece split design, allowing for seamless installation without driveshaft removal. Reduce Deflection, Increase Rigidity: Designed with performance in mind, this upgrade eliminates excessive driveshaft movement for improved alignment and efficiency. Kit Includes:

ECS Driveshaft Center Support Bushings ECS Driveshaft Center Support Carrier (2) Stainless Steel Hex Head Screws (2) Hex Bolts (22326760945) Medium Strength Threadlocker (0.5ml)

Upgraded replacement for your crankcase vent hose P#11127584128 featuring upgraded silicone, stainless steel clamps, and new OE connectors and seals.

Enhance your BMW N55 engine with our Silicone Crank Case Vent Hose, a premium replacement for the fragile, failure-prone factory hose. Over time, the stock plastic hose deteriorates due to constant exposure to heat and oil, leading to cracks and leaks. Our solution? A high-quality silicone hose engineered for superior durability and long-term reliability.

To further enhance performance, we’ve lined the hose with fluorosilicone, providing exceptional resistance to oil and chemical degradation. Designed in-house using advanced CAD modeling and 3D scanning, this hose offers a precise OEM fit while eliminating the common weaknesses of plastic construction.

Each kit includes stainless steel hose clamps for a secure, hassle-free installation. Whether you’re replacing a worn-out CCV hose or upgrading for added peace of mind, this premium solution ensures your BMW N55 runs smoothly and efficiently for years to come.

Features:

Arrives preassembled with new OE fittings and seals
Direct OEM Fit – Retains factory hose dimensions while eliminating reliability issues.
High-Performance Silicone – Resists heat-related wear for long-lasting durability.
4-Ply Fluorosilicone Lining – Superior protection against oil and chemical exposure.
Stainless Steel Clamps Included – Secure installation and extended service life.
Give your BMW N55 the reliability it deserves—upgrade to the ECS Tuning Silicone CCV Hose today!

Why not upgrade when you're due for a replacement? The ECS Tuning silicone hose replacement fixes these issue with two key features in their design. Offering this hose in a much more heat resistant silicone instead of OE rubber and having the hose wrapped in aluminum. The aluminum coating acts as a heat shield to further protect the silicone as well as reducing the temperatures forced on the coolant running through the hose. 

Replaces OE hose #11537545665

Enhance your car's performance with ECS Tuning's polyurethane transmission mounts, designed for both street and track applications. These mounts are engineered to withstand high torque and forced-induction scenarios, eliminating concerns about torn mounts and providing a more engaging driving experience. Although polyurethane may introduce some additional NVH (Noise, Vibration, Harshness), its exceptional durability, wear resistance, and resistance to water, oil, and grease make it the perfect choice for performance enthusiasts. ECS Tuning offers two durometer options to match your driving style, along with a comprehensive DIY installation guide, ensuring a complete solution for your transmission mount requirements.

Key Features:

• Minimized transmission movement, reducing the risk of mis-shifts and over-revs.
• Made from high-quality polyurethane bonded with 304 Stainless Steel.
• Enhanced driving experience for both street and track enthusiasts.
• Two durometer options available: 80A for race applications and 70A for daily driving (ES#2859359).
• Replaces weak OEM mounts.

Universal High-Flow Air Filter

Give your engine the airflow it deserves with this reusable, high-performance air filter—perfect as a direct replacement for an ECS intake system or as the finishing touch for your custom intake project.
Dimensions: 4.5" Base OD • 6" Filter Height • 3.5" Top OD

Upgrade from your restrictive factory filter to an ECS Tuning High-Flow Dry Air Filter and let your engine breathe freely. Improved intake flow enhances power throughout the rev range while helping maintain efficient fuel economy.

Oiled vs. Dry Filters — Which Is Right for You?

Oiled Filters

Offer slightly higher airflow for maximum performance

Require more frequent cleaning

Must be re-oiled after each cleaning

Long-term reusable design saves money over disposable paper filters

Dry Filters

Provide excellent airflow with minimal maintenance

Easily cleaned with warm, soapy water—no oiling required

Still flow significantly better than OE paper filters

Fully reusable and cost-effective

Both versions deliver superior performance over stock filters while offering the long-term benefit of reusability. Choose the option that best fits your maintenance style and performance goals.